Fill in the missing term on each line. Simplify any fractions.
2p + 4 = 6
2p=______ Subtract 4 from both sides ***
p=_______ Divide both sides from 2***

Jen needs to run 6 and 7/8 miles on Friday to reach her goal of running a total of 22 miles in 5 days.

We have,

To find out how many miles Jen ran on Friday, we can start by adding up the miles she ran on Monday, Tuesday, Wednesday, and Thursday:

Monday: 3/4 mile

Tuesday: 5 miles and 1/8 mile

Wednesday: 0 miles

Thursday: 6 and 1/4 miles

Total miles from Monday to Thursday:

3/4 + 5 + 1/8 + 0 + 6 and 1/4 = 15 miles and 1/8

We know that Jen's goal is to run 22 miles in 5 days.

So, to find out how many miles she needs to run on Friday, we can subtract the total miles she has already run from her goal:

22 - 15 and 1/8 = 6 and 7/8 miles

Therefore,

Jen needs to run 6 and 7/8 miles on Friday to reach her goal of running a total of 22 miles in 5 days.

Learn more about speed here:

https://brainly.com/question/7359669

#SPJ1

Answer: When an epitaxial layer is grown on a substrate, the lattice constant of the epitaxial layer may differ from that of the substrate, leading to strain in the layer. In the case of a simple cubic lattice, the lattice constant can be defined as the distance between two adjacent atoms along any lattice vector.

The lattice mismatch between the substrate and the epitaxial layer can be quantified by the lattice mismatch parameter, δ, which is defined as:

δ = (a2 - a1) / a1

where a1 is the lattice constant of the substrate and a2 is the lattice constant of the epitaxial layer. If δ is positive, the epitaxial layer is under compressive strain, while if δ is negative, the epitaxial layer is under tensile strain.

The strain in the epitaxial layer can also be quantified by the strain parameter, ε, which is defined as:

ε = (a2 - a1) / a2

In the case of a simple cubic lattice, the strain parameter is equal to the lattice mismatch parameter, i.e., ε = δ.

When an epitaxial layer is grown, it may undergo island formation due to the strain induced by the lattice mismatch with the substrate. The thickness of the epitaxial layer at which island formation occurs can be estimated using the critical thickness, t_c, which is given by:

t_c = (h_bar^2 * δ^2) / (2 * E * γ)

where h_bar is the reduced Planck constant, E is the elastic modulus of the epitaxial layer, and γ is the surface energy of the epitaxial layer.

If the thickness of the epitaxial layer is less than the critical thickness, the epitaxial layer remains continuous and undergoes strain relaxation. If the thickness of the epitaxial layer is greater than the critical thickness, the epitaxial layer undergoes island formation.

In summary, the growth of an epitaxial layer on a substrate with a different lattice constant can lead to strain in the layer, which can result in island formation at a critical thickness. The critical thickness can be estimated using the lattice mismatch parameter, elastic modulus, and surface energy of the epitaxial layer.

Epitaxial growth refers to the process of depositing a thin layer of material on a substrate such that the crystal structure of the layer mimics that of the substrate. In this case, we are considering the growth of an epitaxial layer of thickness t2 with a relaxed (unstrained) lattice constant a2 on a substrate with a relaxed lattice constant a1.

Assuming a simple cubic lattice for simplicity, we can use the equation for lattice mismatch to calculate the strain between the layer and substrate:

ε = (a2 - a1) / a1

If the lattice constants are matched, ε = 0 and there is no strain. However, if there is a mismatch, there will be strain in the layer. In the case of a relaxed layer, we assume that the strain has been relieved and the layer has reached equilibrium with the substrate.

The thickness of the layer, t2, can affect the strain in the layer. Generally, thinner layers will have less strain because they are more able to conform to the lattice of the substrate. Thicker layers may have more strain, which can lead to defects in the layer.

Overall, the thickness of the epitaxial layer can affect the strain in the layer and should be carefully controlled to minimize defects.

Learn more about Epitaxial here:

https://brainly.com/question/30326071

#SPJ11

2/63 as a percentage round to the nearest tenth of a percent can be written as 31.7%

Fractions refer to a part of a whole. The word fraction comes from Latin word Fractus meaning broken. A percentage is a number that can be expressed as a fraction of 100. The word percent means per 100. It is represented by the symbol %.

Fractions can be converted into percentages by the following steps:

1. Convert the fraction into decimals.

Therefore, on converting 2/63 to decimal we get 0.317

2. Multiply the given decimal by 100 to get a percentage

Hence, the percentage we get after multiplication is 31.7%.

Learn more about Percentage:

https://brainly.com/question/24339661

#SPJ4

Answer:

108

Step-by-step explanation:

This question isn't hard at all! They try to confuse you by giving you a whole bunch of information you don't need. In the question you see out of 133 elem students, only 25 do it in the morning. That means the rest do it in the evening. So 25-133=108.

The main purpose of inferential statistics is to estimate a characteristic of a population based on a sample. This means that inferential statistics are used to make generalizations about a population based on the data that has been collected from a sample of that population. Inferential statistics are used in many different fields, including psychology, economics, and healthcare.

One important aspect of inferential statistics is accounting for variability within a population. This involves understanding the different factors that can influence the outcome of a study and accounting for them in the analysis. For example, if a study is looking at the effects of a new medication on a certain condition, it is important to account for variables such as age, gender, and other health conditions that may influence the outcome.

In addition to accounting for variability, inferential statistics can also help to adjust analyses to improve validity. This means that researchers can use inferential statistics to ensure that their results are reliable and accurate. For example, researchers may use statistical tests to determine whether their findings are significant or whether they are likely to be due to chance.

Finally, inferential statistics can also be used to decide whether the standard deviation is skewed by outliers. Outliers are data points that are significantly different from the rest of the data and can have a large impact on the overall results. By using inferential statistics, researchers can determine whether outliers are having a significant impact on the results and adjust their analyses accordingly.

Overall, the main purpose of inferential statistics is to estimate a characteristic of a population based on a sample. By accounting for variability, adjusting analyses, and dealing with outliers, researchers can use inferential statistics to make accurate and reliable conclusions about a population.

Know more about statistics here:

https://brainly.com/question/31538429

#SPJ11

Answer: 5

Step-by-step explanation: I don't know

Answer:

Step-by-step explanation:

The GCF of 30x²y^5 and 24x^3y^4y^4 and 18x^2y^3 is 6xy^3.

1) To determine the GCF of 30x²y^5 and 24x^3y^4, we need to factor each expression.

30x²y^5 = 2 × 3 × 5 × x² × y^5

24x^3y^4 = 2 × 2 × 2 × 3 × x^3 × y^4

The common factor is:

GCF = 2 × 3 × x² × y^4

2) To determine the GCF of 4y^4 and 18x^2y^3, we again factor each expression.

4y^4 = 2 × 2 × y^4

18x^2y^3 = 2 × 3 × 3 × x^2 × y^3

The common factors are 2 and y^3.

The GCF is 2y^3.

Therefore, the GCF of 30x²y^5 and 24x^3y^4y^4 and 18x^2y^3 is 6xy^3.

Learn more about GCF at https://brainly.com/question/219464

#SPJ1

Answer:

Step-by-step explanation:

5.5x5.5x4.8=145.2

just multiply lxwxh

Answer:

145.2 c,

Step-by-step explanation:

Therefore, Chuck can paint 65 fence posts per hour as per given equation.

Let's call the rate at which Chuck can paint fence posts "c" (in posts per hour). Then, according to the problem, Diana can paint at a rate of "c + 10" posts per hour. Using the given information, we can set up an equation relating their rates:

150 / (c + 10) = 130 / c

To solve for c, we can cross-multiply and simplify:

150c = 130(c + 10)

150c = 130c + 1300

20c = 1300

c = 65

To know more about equation,

https://brainly.com/question/28243079

#SPJ11

Therefore, the differential of y = x² sin 2x is dy/dx = 2x³ cos 2x + 2x sin 2x. Therefore, the differential of y = √(4+ 5x) is dy/dx = 5/(2√(4+ 5x)).

(a) To find the differential of y = x² sin 2x, we will use the product rule of differentiation, which states that if y = f(x)g(x), then the differential dy/dx is given by:

dy/dx = f(x)g'(x) + g(x)f'(x)

where f'(x) and g'(x) represent the derivatives of f(x) and g(x) with respect to x, respectively. Applying this rule to the given function, we get:

y = x² sin 2x

f(x) = x², g(x) = sin 2x

f'(x) = 2x, g'(x) = 2 cos 2x

dy/dx = f(x)g'(x) + g(x)f'(x)

dy/dx = x²(2 cos 2x) + sin 2x(2x)

dy/dx = 2x³ cos 2x + 2x sin 2x

(b) To find the differential of y = √(4+ 5x), we will use the chain rule of differentiation, which states that if y = f(g(x)), then the differential dy/dx is given by:

dy/dx = f'(g(x))g'(x)

where f'(x) and g'(x) represent the derivatives of f(x) and g(x) with respect to x, respectively. Applying this rule to the given function, we get:

y = √(4+ 5x)

f(x) = √x, g(x) = 4+ 5x

f'(x) = 1/(2√x), g'(x) = 5

dy/dx = f'(g(x))g'(x)

dy/dx = (1/(2√(4+ 5x)))(5)

dy/dx = 5/(2√(4+ 5x))

To know more about differential,

https://brainly.com/question/24898810

#SPJ11

To determine the solutions to the given boundary-value problem, we must first analyze the values of L. If L is greater than 0, then we can use Sturm-Liouville theory to solve the problem.

If L is chosen in such a way that the boundary-value problem has a unique solution, then we have precisely one nontrivial solution. However, if L is chosen so that there are multiple solutions, we have more than one solution.

If L is chosen in such a way that the boundary-value problem has no solution, then there are no solutions, including the trivial solution. The trivial solution is the solution where all the unknowns are set to zero.

Therefore, it is possible to find values of L > 0 so that the given boundary-value problem has precisely one nontrivial solution, more than one solution, no solution, and the trivial solution depending on how L is chosen.

Involving values of L > 0, boundary-value problems, and nontrivial solutions. To determine whether it is possible to find values of L > 0 so that the given boundary-value problem has precisely one nontrivial solution, more than one solution, no solution, and the trivial solution, follow these steps:

1. Identify the boundary-value problem in question. This typically involves a differential equation and boundary conditions.

2. Analyze the boundary conditions and the differential equation to see if there is a possibility of finding values of L > 0 that satisfy the problem.

3. Determine if there is a trivial solution, which typically corresponds to a zero solution, where all the components of the solution are zero.

4. Check for the existence of nontrivial solutions. This may involve solving the differential equation for particular values of L > 0 and applying the boundary conditions.

5. Compare the results from steps 3 and 4 to determine if there is precisely one nontrivial solution, more than one solution, no solution, or only the trivial solution.

Visit here to learn more about Sturm-Liouville theory:

brainly.com/question/12212553

#SPJ11

A: The point estimate for the mean lifetime of the battery is the sample mean, which is 120.1 hours.
B: The critical value is approximately 1.96.

C: Standard Error = 2.83

D: Margin of Error = 5.55

E: 95% Confidence Interval = (114.55, 125.65)
F: Since the upper bound of the 95% confidence interval is 125.65, which is less than 130, it is unlikely that the population mean μ is greater than 130.

A: The point estimate for the mean lifetime of the battery is the sample mean, which is 120.1 hours.

B: To find the critical value, we'll use the standard normal (Z) distribution for a 95% confidence interval. The critical value, Z, corresponds to 0.025 in each tail (since 95% confidence means 2.5% in each tail). From the Z-table, the critical value is approximately 1.96.

C: To find the standard error, we use the formula:

Standard Error = (Standard Deviation) / √(Sample Size) = 20 / √(50) = 20 / 7.071 = 2.83

D: To find the margin of error, we use the formula:

Margin of Error = (Critical Value) * (Standard Error) = 1.96 * 2.83 = 5.55

E: To construct the 95% confidence interval, we add and subtract the margin of error from the point estimate:

Lower Bound = 120.1 - 5.55 = 114.55 hours
Upper Bound = 120.1 + 5.55 = 125.65 hours

95% Confidence Interval = (114.55, 125.65)

F: Since the upper bound of the 95% confidence interval is 125.65, which is less than 130, it is unlikely that the population mean μ is greater than 130.

Visit here to learn more about the Margin of Error:

brainly.com/question/29101642

#SPJ11

The other angles of rotation that take point A to point B are -13π/4 radians (negative value) and 3π/4 radians (positive value).

We can locate coterminal angles by adding or subtracting integer multiples of 2π (a full turn) to the given tilt.

The given angle is -5π/4 radians.

We will have to take away 8π/4 from the value above

-5π/4 - 8π/4 =

-13π/4

Hence the negative is -13π/4 radians.

Next we have to solve for the positive

-5π/4 + 8π/4

= 3π/4

Therefore the other angles of rotation that take point A to point B are -13π/4 radians (negative value) and 3π/4 radians (positive value).

Read more on angles of rotation here:https://brainly.com/question/2078551

#SPJ1

Answer: $8.03

Step-by-step explanation:

All you gotta do is divide 24 by 2.99. (24/2.99)

Answer:

0.124 cent

Step-by-step explanation:

U Can Solve It By Saying If 24 Bottle =$2.99 Then

1 Bottle = X

You Will Criss Cross It And Solve

The interpretation of the given compound interest expression is:

2400 is the amount of initial deposit

1.03 is the amount

12t is the number of times the account has compounded since it opened

The formula for compound interest is:

A = P(1 + (r/t))^(nt)

Where:

A = final amount

P = initial principal balance

r = interest rate

n = number of times interest applied per time period

t = number of time periods elapsed

We are given the equation as:

S = 2400(1.03)^(12t)

Thus:

2400 is the amount of initial deposit

1.03 is the amount

12t is the number of times the account has compounded since it opened

Read more about Compound Interest at: https://brainly.com/question/24274034

#SPJ1

If the talent contest has a total of $1000 in prize money, and there are five prizes to be awarded, we can divide the total prize money by the number of prizes to find the amount of money for each prize.

So, $1000 / 5 = $200 for each prize.

Therefore, the amount of money for each of the five prizes is $200.

The monthly costs are given as follows:

The slope-intercept representation of a linear function is given by the equation presented as follows:

y = mx + b

The coefficients of the function and their meaning are described as follows:

The membership costs $20 per month and members get a discounted price of $1.50 per slice of pizza, hence the intercept and the slope are given as follows:

b = 20, m = 1.5.

Hence the cost function for x slices is given as follows:

C(x) = 1.5x + 20.

For 11 slices, the cost is given as follows:

C(11) = 1.5(11) + 20 = $36.50.

More can be learned about linear functions at https://brainly.com/question/24808124

#SPJ1

Answer: The total number of cars seen is:

4 + 7 + 12 + 14 + 5 + 3 = 45

The number of brown cars seen is 5.

The probability of the next car being brown is equal to the number of brown cars divided by the total number of cars seen:

P(brown) = 5/45 = 1/9

Therefore, the probability of the next car being brown is 1/9.

Step-by-step explanation:

The 95% confidence interval for the difference in the mean distances between oil changes for all luxury cars and all compact lower-price cars is (-94.86, 310.86) miles.

To construct the confidence interval, we use the two-sample t-test with equal variances assumption. We calculate the pooled standard deviation, which is a weighted average of the sample standard deviations based on their degrees of freedom. Then, we compute the standard error of the difference in means using the pooled standard deviation and the sample sizes.

We find the t-value using a t-distribution table with (n1+n2-2) degrees of freedom and a significance level of 0.05. Finally, we construct the confidence interval by adding and subtracting the product of the t-value and the standard error from the difference in sample means. Since the confidence interval includes zero, we conclude that there is no significant difference in the mean distance driven between oil changes for luxury and compact cars.

Therefore, we can infer that the cost of the car is not a significant factor in determining whether people follow the standard recommendation for automobile oil changes.

Learn more about Confidence Interval:

brainly.com/question/13067956

#SPJ11

Based on the mentioned informations, the initial deposit that was made by the mother is calculated to be  $9,000.00.

We can use the formula for compound interest to solve this problem:

A = P(1 + r/n)[tex].^{nt}[/tex]

where:

A = the final amount (in this case, $13,685.69)

P = the principal (the initial deposit we're trying to find)

r = the interest rate (8%, or 0.08)

n = the number of times the interest is compounded per year (twice, since it is done every six months)

t = the time (in years)

Since we know that the deposit was made 4 years ago, and the interest was compounded twice a year, we have:

n = 2

t = 4/1 = 4

Substituting the known values into the formula, we get:

13,685.69 = P(1 + 0.08/2)²ˣ⁴

Simplifying the right side of the equation:

13,685.69 = P(1.04)⁸

Dividing both sides by (1.04)⁸:

P = 13,685.69 / (1.04)⁸

P = 9,000.00

Therefore, the initial deposit that your mother made was $9,000.00.

Learn more about Compound Interest ;

https://brainly.com/question/25857212

#SPJ4

The complete question is :

When my brother was born, my mother made a deposit at Finanzas y Más bank with a compound interest rate of 8%, and the capitalization was done every six months. Today, my sister is 4 years old, and my mother retired $13,685.69. What was the amount of the initial deposit that my mother made?

If there is NO VARIATION in shell thickness within a population of snails, and no mutations occur, shell thickness does not evolve in response to crab predation. This is because, without variation or mutation, there is no basis for natural selection to act upon, and thus no change in shell thickness can occur in the population.

If shell thickness evolution is absent in snail populations, it is unlikely that shell thickness has evolved in response to agriculture. This means that the population will not be able to adapt to the pressure and the thin-shelled snails will continue to be crabs, while the thick-shelled snails have no advantage.

So the correct answer is that the thick shell does not develop in humans. If there is no change in the population, there will be no basis for natural selection and therefore the shell thickness will not develop as a result of the crab.

To know more about Shell thickness:

https://brainly.com/question/31171184

#SPJ11

If Vicky jogged 2³/₄ miles in ¹/₂ hours, her average rate of speed in miles per hour is 5¹/₂ miles per hour.

The average speed refers to the rate of movement, which is the quotient of the total distance and the time taken to cover the given distance.

While the given speed was expressed for half an hour, we can convert this speed to per-hour by dividing the given speed by ¹/₂ hours.

Alternatively, we can use multiplication, which is the inverse of division to compute the average speed per hour.

Vicky's given jogging distance in ¹/₂ hours = 2³/₄ miles

Vicky's average jogging speed = 5¹/₂ miles per hour (2³/₄ ÷ ¹/₂) = (2³/₄ x ²/₁)

Learn more about the average speed at https://brainly.com/question/29798040.

#SPJ1

Explanation:

If we started at y = 0, then the bar for last year's sales would be 800 units tall. This is to represent the $800 in sales last year.

However, we start at $600 on the y axis instead. This means the bar for last year's sales would be 200 units tall (because 800-600 = 200).

The bar for this year's sales is 600 units tall (because 1200-600 = 600)

Divide those two heights

600/200 = 3

The second bar is 3 times taller than the first bar.

But wait, the jump from $800 to $1200 is NOT "times 3". The jump is instead "times 1.5" which we can determine like so: 1200/800 = 1.5

In other words, 1.5*800 = 1200

Therefore, the fact we start at 600 on the y axis causes the 2nd bar to be taller than it should be in relation to the first. It causes a distortion.

Check out the diagram below. Figure 1 has us start at 600, which is deceiving. Be careful when you see such a chart in a newspaper for instance. Figure 2 has us start at 0 and now things are in the correct proportion. I used LibreOffice Calc spreadsheet to make the charts.

The value of x is √93.

The correct option is A.

We have,

Hypotenuse= 17

Base= 14

Using Pythagoras theorem

H² = P² + B²

P² = H² - B²

P² = 17² - 14²

P² = 289 - 196

P²=93

P= 9.64

Thus, the value of x is √93.

Learn more about Pythagoras theorem here:

https://brainly.com/question/343682

#SPJ1

Koel's new balance in his checking account is $845.99, which is option (a).

To find Koel's new balance in his checking account, we need to subtract the total amount of the checks he wrote on March 18 and add the amount of his deposit on March 19 to his balance on March 17.

Total amount of checks = $56.24 + $97.00 + $22.50 = $175.74

New balance = balance on March 17 - the total amount of checks + deposit

                      = $846.73 - $175.74 + $175.00

                      = $845.99

Therefore, Koel's new balance in his checking account is $845.99, which is an option (a).

Learn more about arithmetic addition and subtraction here:

https://brainly.com/question/29735725

#SPJ1

Answer:

Na

Step-by-step explanation:

The survey could be biased because the people surveyed were chosen randomly.

The first blue peak around day 17 represents the highest concentration of antibodies that occurs after the first exposure to antigen X.

Antibodies are proteins that are produced by the immune system in response to the presence of an antigen, which is a foreign substance that the body recognizes as a threat. When the body is exposed to antigen X for the first time, it takes some time for the immune system to recognize and respond to it.

As the immune system begins to produce antibodies against antigen X, their concentration in the bloodstream gradually increases until it reaches a peak, which is the point at which the body has produced the maximum amount of antibodies against that antigen. This first blue peak indicates that the body has successfully mounted an immune response to antigen X, and is now better equipped to recognize and neutralize it if it encounters it again in the future.

Learn more about antigen here:

brainly.com/question/14724412

#SPJ11

The perimeter of the real playground is 500 multiplied by the perimeter of the scale playground

From the question, we have the following parameters that can be used in our computation:

Scale factor = 1:500.

The scale dimensions of the playground are not given

However, the scale factor = 1:500 means that we multiply the perimeter of the scale playground by 500 to get the real perimeter

Read more about scale drawing at

https://brainly.com/question/29229124

#SPJ1