Find the 6th term of geometric sequenceB whose ratio is 2/3 and whose first term is 2

According the question given you jogged around the distance of 26[tex]\frac{2}{3}[/tex] miles.

What is an improper fraction?

When the numerator value exceeds the denominator value, the fraction is incorrect. Incorrect fractions can also be expressed in the form of a whole number and a proper number, where the numerator is the remainder and the denominator is left unchanged.

Here, we have

Given: You jog 6 2/3 miles around a track each day. If you jogged that distance 4 times last week.

We have to find out how many miles did you jog.

The total jogging distance will be

= 4(6 2/3) miles

= 4 × 20/3 miles

= 80/3 miles

= 26[tex]\frac{2}{3}[/tex] miles.

Hence, you jog 26[tex]\frac{2}{3}[/tex] miles.

Question: You jog 6 2/3 miles around a track each day. If you jogged that distance 4 times last week, how many miles did you jog?

To learn more about the improper fraction from the given link

https://brainly.com/question/20302951

#SPJ1

We'd need a sample size of at least 659 to estimate the population proportion with a periphery of error of 0.03.

To find the sample size demanded a confidence interval with a periphery of error of 0.03, we need to use the following formula

n = ( zσ/ E) * ( zσ/ E) * pq

where

z is the z- score corresponding to the asked position of confidence( let's assume 95 confidence, which corresponds to a z- score of 1.96)

σ is the population standard deviation( which is unknown in this case, so we'll use a conservative estimate of0.5)

E is the periphery of error( which is0.03)

p is the estimated proportion( which is0.41)

q = 1- p

Plugging in the values, we get

n = (1.960.5/0.03) * (1.960.5/0.03*0.41( 1-0.41) ≈658.72

Rounding up, we get a sample size of 659. thus, we'd need a sample size of at least 659 to estimate the population proportion with a periphery of error of 0.03, assuming a 95 confidence position and a population proportion estimate of 0.41.

Learn more about confidence interval;

https://brainly.com/question/20309162

#SPJ4

Answer:

Surface area of prism A is approximately 12.4 square units.

Step-by-step explanation:

Since prism A and prism B are similar, their corresponding side lengths are proportional. Let's use the scale factor k to represent the ratio of the side lengths of prism B to those of prism A. Then, the volume of prism B is (k³)(27) = 27k³ cubic units. Similarly, the surface area of prism B is (k²)(surface area of prism A).

We are given that the volume of prism B is approximately 512 cubic units. Therefore, we can solve for k:

27k³ = 512

k³ = 512/27

k ≈ 3.62

Now, we can use k to find the surface area of prism A:

surface area of prism B = (k²)(surface area of prism A)

128 = (3.62²)(surface area of prism A)

surface area of prism A ≈ 12.4 square units

Therefore, the surface area of prism A is approximately 12.4 square units.

The equation with the new substitutions and conversion factor is a'B'T' = (1/6) * (2/3)^(1/3) * a^(1/3) * d^(1/2)*a^6/6 where k is (1/6) * (2/3)^(1/3) * a^(1/3) * d^(1/2) The intercept value of the log-log graph would have been -1.108.

Starting with Equation 4: T = ka^6/6, we can substitute a = (d/k)^(1/6) and b = (2/3)^(1/2) * (d/k)^(1/3) to get

T = k[(d/k)^(1/6)]^6/6

T = k(d/k)^(1/2)/6

T = (k^(1/2)/6) * d^(1/2)

Now we can rearrange the equation so that a, b, and t are on the left side

a'B'T' = ka^6/6

(a/d)^(1/6) * b^(2/3) * T' = k[(a/d)^(1/6)]^6/6 * T'

(a/d)^(1/6) * (2/3)^(1/2) * (d/k)^(1/3) * T' = (k^(1/2)/6) * d^(1/2) * T'

(2/3)^(1/2) * (a/d)^(1/6) * d^(1/3) * T' = (k^(1/2)/6) * d^(1/2) * T'

(2/3)^(1/2) * (a/d)^(1/6) * d^(1/3) = k^(1/2)/6

k = [(2/3)^(1/2) * (a/d)^(1/6) * d^(1/3)]^2/6

k = (1/6) * (2/3)^(1/3) * a^(1/3) * d^(1/2)

With this new conversion factor, the intercept of the log-log graph would have changed. The intercept represents the value of T when a = 1 (since log(1) = 0). Using the new conversion factor, we have

T = (1/6) * (2/3)^(1/3) * d^(1/2) * a^(1/3)

T = (1/6) * (2/3)^(1/3) * d^(1/2)

log(T) = log[(1/6) * (2/3)^(1/3) * d^(1/2)]

log(T) = log(1/6) + log[(2/3)^(1/3)] + log(d^(1/2))

log(T) = log(1/6) + (1/3) * log(2/3) + (1/2) * log(d)

So the intercept of the log-log graph would be log(1/6) + (1/3) * log(2/3) = -1.108, assuming that d is held constant. This intercept represents the value of log(T) when log(a) = 0, or when a = 1. In other words, when a = 1, the predicted value of T would be 0.162 (or 16.2% of its maximum value).

To know more about log graph:

https://brainly.com/question/17009226

#SPJ4

--The given question is incomplete, the complete question is given

" Plug the two substitutions into Equation 4 (T = ka^6/6)). Rearrange the equation so that a, b,t are on the left side of the equation and d remains on the right side, e.g. a'B'T' = ka^6/6 you will figure out what the "k" if you used this version of the equation (including your new conversion factor, how would this have changed the intercept of your log-log graph? what would its value have been?"--

The rate at which the base of the triangle is changing when the altitude is 20 cm and the area is 120 cm^2 is 0 cm/s.

To solve this problem, we need to use the formula for the area of a triangle, which is:

A = (1/2)bh

Where A is the area, b is the base, and h is the altitude.

We know that the area is 120 cm^2 and the altitude is 20 cm. So we can plug in these values and solve for the base:

120 = (1/2)b(20)

240 = 20b

b = 12 cm

Now we need to differentiate both sides of the equation with respect to time (t):

dA/dt = (1/2)(db/dt)h

We are given the value of dh/dt (which represents the rate at which the altitude is changing) is 3 cm/s. We need to find db/dt (which represents the rate at which the base is changing).

Plugging in the values we know, we get:

dA/dt = (1/2)(db/dt)(20)

Solving for db/dt, we get:

db/dt = (2dA/dt)/h

Plugging in the values we know, we get:

db/dt = (2)(0)/20

db/dt = 0 cm/s
Since the area is constant (120 cm²) and the altitude is constant (20 cm), the base of the triangle is not changing. Therefore, the rate at which the base is changing is: 0 cm/s

Learn about application of derivatives here: brainly.com/question/25120629

#SPJ11

the surface area of the cylinder represented by the given net is approximately 166.306 square feet.

To calculate the surface area of a cylinder using its net, we need to identify the different components of the net and their measurements.

Without the specific net provided, I will assume a standard net of a cylinder, consisting of two circles for the top and bottom faces, and a rectangle for the lateral (side) surface.

Given that the measurements provided are 10 ft and 16 ft, we can assume that the height of the cylinder is 10 ft and the circumference of the circular bases is 16 ft.

The surface area of a cylinder is given by the formula:

Surface Area [tex]= 2 \times \pi \times r \times (r + h)[/tex]

where r is the radius of the circular base and h is the height of the cylinder.

Since the circumference of the circular base is given as 16 ft, we can calculate the radius (r) using the formula:

Circumference [tex]= 2 \times π times r[/tex]

[tex]16 = 2 \times π \times r[/tex]

[tex]r = 16 / (2 \times \pi)[/tex]

[tex]r v\ approx 2.546 ft[/tex] (rounded to three decimal places)

Now that we know the radius (r) and the height (h) of the cylinder, we can substitute these values into the formula for surface area:

Surface Area  [tex]= 2 \times π \times 2.546 \times (2.546 + 10)[/tex]

Surface Area  [tex]\approx 166.306 ft^2[/tex] (rounded to three decimal places)

Therefore, the surface area of the cylinder represented by the given net is approximately  [tex]166.306[/tex] square feet.

Learn more about cylinder here:

https://brainly.com/question/16134180

#SPJ1

The sample space are:

{AR, AS, AT, AE, RA, RS, RT, RE, SA, SR, ST, SE, TA, TR, TS, TE, EA, ER, ES, ET}

The favorable outcomes care:

{RS, RT, SR, ST, TR, TS}

The probability is  0.3 or 30%

Part A:

The sample space represents all possible outcomes that can occur when two cards are randomly selected without replacement from the given pile of cards.

The sample space can be represented as follows:

{AR, AS, AT, AE, RA, RS, RT, RE, SA, SR, ST, SE, TA, TR, TS, TE, EA, ER, ES, ET}

Part B:

The favorable outcomes are those outcomes in which both cards are consonants. In this case, the consonants are R, S, and T.

The favorable outcomes can be represented as follows:

{RS, RT, SR, ST, TR, TS}

Part C:

To calculate the probability of selecting 2 cards that are consonants, we need to find the ratio of favorable outcomes to the sample space.

The number of favorable outcomes is 6, and the size of the sample space is 20.

Therefore, the probability of selecting 2 cards that are consonants is:

P(consonants) = favorable outcomes / sample space

P(consonants) = 6 / 20

P(consonants) = 0.3 or 30%

Learn more about sample space at

https://brainly.com/question/10558496

#SPJ1

Therefore (t) can  be written as **(2 - 3Q) / (Q + 4)**.

Within the given equation, Q is a variable. It stands for an unknowable amount or value that can be ascertained by equation-solving.

A quantity that can take on any one of a number of values is referred to as a variable. A variable in mathematics is a symbol or letter that denotes an unknowable amount or value. The variable Q in the given equation stands for an unknowable quantity or value that can be ascertained by resolving the equation.

The equation is as follows:

Q = (2 - 4t) / (t + 3)

When we divide both sides by (t + 3), we obtain:

Q(t + 3) = 2 - 4t

When we increase the left side of the equation, we obtain:

Qt + 3Q = 2 - 4t

The result of adding 4t to both sides of the equation is:

Qt + 3Q + 4t = 2

Combining related concepts gives us:

t(Q + 4) = 2 - 3Q

The result of dividing both sides by (Q + 4) is:

t = (2 - 3Q) / (Q + 4)

t can therefore be written as **(2 - 3Q) / (Q + 4)**.

To know more about variable visit:

brainly.com/question/29583350

#SPJ1

The volume of the prism is gotten as 312 cm³.

Volume is described as a measure of three-dimensional space. It is often quantified numerically using SI derived units or by various imperial or US customary units.

The basic formula for volume is length × width × height.

The formula for the volume of triangular prism = area of triangle x length

area of triangle = 1/2 x base x height

⇒ area of triangle = 1/2 x 8 x 6 = 24 cm²

Therefore, volume of the prism = 24 x 13 = 312 cm³

Learn more about volume at: https://brainly.com/question/27710307

#complete question is shown in the diagram

#SPJ1

Answer: Trapezoid

Step-by-step explanation:

Answer:

it's also called a quadrilateral with 1 right angle

The solution to the IVP given by y''+y=t, y(0)=1, y'(0)=-2 is y(t) = cos(t) - (3/2) sin(t) + (1/2) t.

To solve the Initial Value Problem, we can use the method of undetermined coefficients, which involves assuming a particular form for the solution to the non-homogeneous equation y'' + y = t, and then finding the coefficients of the terms in that form by substituting it back into the equation.

First, we find the general solution to the homogeneous equation y'' + y = 0

The characteristic equation is r² + 1 = 0, which has solutions r = ±i. Therefore, the general solution to the homogeneous equation is

y_h(t) = c₁ cos(t) + c₂ sin(t),

where c₁ and c₂ are constants determined by the initial conditions.

Next, we assume a particular form for the non-homogeneous solution, based on the form of the right-hand side t. Since t is a linear function, we assume that the particular solution has the form

y_p(t) = a t + b.

Substituting this into the differential equation, we get

y''_p + y_p = t

2a + (at+b) = t.

Equating coefficients, we get

a = 1/2, b = 0.

Therefore, the particular solution is

y_p(t) = (1/2) t.

The general solution to the non-homogeneous equation is then the sum of the homogeneous and particular solutions

y(t) = y_h(t) + y_p(t)

= c₁ cos(t) + c₂ sin(t) + (1/2) t.

To determine the constants c₁ and c₂, we use the initial conditions:

y(0) = c₁ cos(0) + c₂ sin(0) + (1/2) (0) = c₁ = 1,

y'(0) = -c₁ sin(0) + c₂ cos(0) + (1/2) (1) = c₂ - (1/2) = -2,

so c₂ = -3/2.

Therefore, the solution to the IVP is

y(t) = cos(t) - (3/2) sin(t) + (1/2) t.

Learn more about Initial Value Problem here

brainly.com/question/30547172

#SPJ4

Thus, the number of current lawnmowers in the Springtown Hardware is 864,900.

In mathematics, a percentage is a number or ratio that may be expressed as a fraction of 100. The Latin word "per centum," which meaning "per 100," is where the word "percent" comes from. % is the symbol used to represent percentages.

When a number is expressed in decimal form, you can calculate its percentage by multiplying it by 100. For instance, multiplying 0.5 by 100 gives you the percentage 50%.

Given data:

Springtown Hardware's inventory - 697,500 lawnmowers.

Current inventory of 24% more lawnmowers.

Current inventory = old inventory  + 24% of old inventory

Current inventory =  697,500 + 24 % of  697,500

Current inventory =  697,500 + 24 *  697,500/ 100

Current inventory =  697,500 + 24* 6,975

Current inventory = 864,900

Thus, the number of current lawnmowers in the Springtown Hardware is 864,900.

Know more about the percentage:

https://brainly.com/question/24877689

#SPJ1

p=8h is the equation.This part is represented in tabular form.The coefficient of h. Mark worked 21 hours that week.Yes, the equation is a direct variation.

An equation is a statement that shows the equality of two expressions. It typically contains one or more variables and may involve mathematical operations such as addition, subtraction, multiplication, and division. Equations are commonly used in mathematics, science, and engineering to model real-world situations and solve problems.

Direct variation is a mathematical relationship between two variables, where a change in one variable results in a proportional change in the other variable. In other words, if two variables are in direct variation, when one variable increases, the other variable increases as well, and when one variable decreases, the other variable decreases as well, in a constant ratio.

Part A: The equation for this situation is p = 8h, where p represents the pay in dollars and h represents the number of hours worked.

Part B:

| Worked (hrs) | Pay (p) |

|------------------|---------|

| 1                | 8       |

| 2                | 16      |

| 3                | 24      |

| 4                | 32      |

| 5                | 40      |

| 6                | 48      |

and so on.

Part C: The coefficient of h, which is 8, shows the number of hours Mark worked.

Part D: We can use the equation p = 8h and substitute p = 168 to find the number of hours Mark worked.

168 = 8h

h = 21

Therefore, Mark worked 21 hours that week.

Part E: Yes, the equation is a direct variation because the pay (p) is directly proportional to the number of hours worked (h) and the constant of variation is 8.

Learn more about direct variation here:

https://brainly.com/question/13977805

#SPJ1

The average distance of electric cars is 275.

The range of the data set is 300.

Given:

To find: Average distance of electric cars

Solution:

The average distance of electric cars can be calculated by finding the average of the data set containing the distances of electric cars. Let's assume that the data set is as follows:

250, 250, 250, 400, 300, 300, 350, 100

To find the average distance of electric cars, we can use the formula:

Average = (Sum of all the data points) / (Number of data points)

Substituting the given values, we get:

Average = (250 + 250 + 250 + 400 + 300 + 300 + 350 + 100) / 8

Average = 2200 / 8

Average = 275

Therefore, the average distance of electric cars is 275.

Now, let's calculate the range of the data set. The range is the difference between the maximum and minimum values in the data set. From the given data set, we can see that the minimum value is 100 and the maximum value is 400.

Range = Maximum value - Minimum value

Range = 400 - 100

Range = 300

Therefore, the range of the data set is 300.

Read more about range here:

https://brainly.com/question/24326172
#SPJ1

The correct option is C′(−10.5, 3.5) i.e. the vertex of point C′ is (-10.5, 3.5).

What is dilation?

In mathematics, dilation is a type of transformation that changes the size of a geometric object, but not its shape or orientation. Dilation is similar to scaling, but it involves a fixed point called the center of dilation, and a scale factor that determines the degree of expansion or contraction.

To determine the vertex of point C′, we need to apply the dilation transformation to the coordinates of the original vertex C(-3,1) using a scale factor of 3.5.

The coordinates of C′ can be found by multiplying the coordinates of C by the scale factor:

C′ = (3.5)C = (3.5)(-3,1) = (-10.5,3.5)

Therefore, the vertex of point C′ is (-10.5, 3.5).

Thus, the correct option is C′(−10.5, 3.5).

To learn more about dilation visit the link:

https://brainly.com/question/3457976

#SPJ1

A congruence transformation that maps triangle RST to triangle UVW is a reflection along the line y = 1, followed by a translation 2 units right and down by 1 units.

A congruence transformation that maps triangle RST to triangle UVW is a rotation of 180°, followed by a translation 2 units left and down by 5 units.

In Mathematics and Geometry, a transformation is the movement of a point from its initial position to a new location. This ultimately implies that, when a geometric figure or object is transformed, all of its points would also be transformed;

In Mathematics and Geometry, a reflection can be defined as a type of transformation which moves every point of the geometric figure such as a triangle, by producing a flipped, but mirror image of the geometric figure.

By critically observing the geometric figures, we can reasonably infer and logically deduce that the pre-image underwent a sequence of congruence transformation to produce the image.

Read more on transformation here: https://brainly.com/question/10754933

#SPJ1

the 11th term in the given geometric sequence is equal to [tex]-9216x^{52}[/tex]

A sequence is a list of numbers indexed by the natural numbers 1,2,3,4,5.. A common notation for a sequence is [tex]a_1,a_2,a_3,\cdots[/tex]. Most often for interesting sequences there is some pattern in the list of numbers, and there is some formula to generate the nth number in the sequence. A sequence is called a geometric sequence if the next number number is got from the previous number by multiplying it by a fixed number r. This number is called the common ratio r of the sequence. So if the first number is a, then the second number is ar, the third is [tex]ar^2[/tex]... So that the nth number [tex]a_n = ar^{n-1][/tex].  

For example 1 ,3,9,27,81,.... The sum of the first n terms of such a sequence is equal to [tex]$S_n = \frac{a(r^n-1)}{r-1}$[/tex]. if the absolute value of r, [tex]|r| < 1[/tex], then the sum to infinity is [tex]$S = \frac{a}{1-r}$[/tex].

In our question we are given a geometric sequence whose first term :

[tex]$a = -9x^2\,,\textrm{ and common ratio : r } = 2x^5$[/tex] .

So the 11th term is [tex]$ar^{10} = (-9x^2){(2x^5)}^{10} = (-9x^2)(1024x^{50}) = -9216x^{52}$[/tex]

To know more about geometric sequences, visit:

https://brainly.com/question/13008517

#SPJ1

Answer:

Harry can buy 5 gallons of lemonade and 5 gallons of iced tea and still have $1.50 left over from his original $24 dollar budget

Step-by-step explanation:

If x is a non-negative real number, then the expression √ x is called the Principal square root. The answer is Principal Square Root.

What is Principal Square Root?

The positive square root of a non-negative real integer is the principal square root. It is the one and only non-negative real number that, when squared, yields the given non-negative real number. The principal square root of 9 is 3, for example, because 3 multiplied by itself equals 9.

The radical sign (√) is frequently used to represent the principal square root. The term √x denotes Principal square root of x. The sign can be used to indicate the negative square root of x in some settings, but this is less frequent.

The principal square root notion is significant in mathematics, including algebra, geometry, and calculus. It's used to solve equations, simplify expressions, and calculate lengths and distances. It's also used in a wide range of scientific and engineering applications.

Therefore, if x is a non-negative real number, then the expression √ x is called the Principal square root.

Learn more about Principal Square Root:

https://brainly.com/question/29775049

#SPJ4

If x is a nonnegative real number, then the expression √ x is called the square root of x. The square root of a nonnegative real number is a value that, when multiplied by itself, equals the original number.

If x is a nonnegative real number, then the expression √x is called the "principal square root" of x. The principal square root of a nonnegative real number x is the nonnegative real number that, when multiplied by itself, equals x. In other words, if y = √x, then y * y = x. This ensures that the result is also a nonnegative real number.

For example, the square root of 4 is 2 because 2 multiplied by 2 equals 4. The square root function is denoted by the symbol √ and is used to find the positive number that, when squared, gives the input value.

To learn more about principal square root: brainly.com/question/29775310

#SPJ11

Answer: Circumference = 18 π cm

Step-by-step explanation:

We can use this formula to find the circumference of a circle:

➜ r is equal to the radius, also known as half the width of a circle.

      C = 2πr

We will substitute our known values and solve for C by multiplying. Since the answer option includes π in our units, we do not multiply this into the 18.

      C = 2πr

      C = 2π(9)

      C = 18 π cm

Answer: 18π

Step-by-step explanation:

The circumference of a circle is equal to 2πr, with r being equal to the radius. The radius of a circle is defined as the length from any point on the circle to its middlemost point. In this case, we are given the value of the radius as defined by the line. The radius equals 9, which we can plug into the equation.

C= 2πr

C = 2π(9)

C = 18π = 56.55

Hope this helps!

The scale factor of the dilation must be greater than 1. if the image A'B'C' is bigger than the preimage ABC

If the image A'B'C' is bigger than the preimage ABC, then the scale factor of the dilation must be greater than 1.

In other words, the length of any segment in the image is larger than the corresponding segment in the preimage by the same factor.

Since D is the center of the dilation, we can use the ratio of the corresponding side lengths of the image and preimage triangles to find the scale factor.

For example, if we want to find the scale factor for A', we can use:

scale factor = B'C'/BC

Read more about scale factor at

https://brainly.com/question/29229124

#SPJ1

The results of the balls in Phillip's bag are:

The mean = 8.

The median = 7.

The mode = blue

The range = 12

The mean (or the average) is the sum of all the values divided by the total number of values. Let's calculate the mean for the given data:

Total number of balls = 8 + 3 + 6 + 3 + 13 + 15 = 48

Mean = (8 + 3 + 6 + 3 + 13 + 15) / 6 = 48 / 6 = 8

Mean = 8.

The median is the middle value when a set of values is arranged in ascending or descending order.

Let's arrange the given data in ascending:

3, 3, 6, 8, 13, 15

As the total number of values is even, the median will be the average of the two middle values, which are 6 and 8.

Median = (6 + 8) / 2 = 7

The median = 7.

The mode is the value that appears most frequently in a set of values. Let's find the mode of the given data:

Red balls: 8

Green balls: 3

Yellow balls: 6

Orange balls: 3

Black balls: 13

Blue balls: 15

Blue balls have the highest frequency (i.e., 15) among all the colors.

The range is the difference between the highest and lowest values in a set of values. Let's find the range of the given data:

Highest value = 15 (blue balls)

Lowest value = 3 (green balls and orange balls)

Range = Highest value - Lowest value = 15 - 3 = 12

Range = 12.

Learn more about the mean at brainly.com/question/1136789

#SPJ1

the sequence of transformations that produces R'S'T' from RST is translation 2 units to the right and 3 units down, followed by a rotation of 90 degrees clockwise, and finally a reflection across the x-axis.

A triangle is a polygon since it has a total of three faces along with three vertices. It belongs to the fundamental geometric shapes. Triangles having vertex positions alternating between A and B are referred to as triangles ABC. A unique plane and a triangle in Euclidean geometry appear when the three vertices are not collinear. Due to its three sides and three corners, triangles are considered polygons. The corners of a triangle are defined as the locations where its three sides meet. Three triangle angles are multiplied to get 180 degrees.

To transform triangle RST to R'S'T', we can use the following sequence of transformations:

Translation: Move the triangle 2 units to the right and 3 units down. This will result in triangle R''S''T'' with vertices (2, -3), (-2, 0), (-3, -2).

Rotation: Rotate triangle R''S''T'' 90 degrees clockwise about the origin. This will result in triangle R'''S'''T''' with vertices (3, 2), (0, 2), (2, 3).

Reflection: Reflect triangle R'''S'''T''' across the x-axis. This will result in triangle R'S'T' with vertices (3, -2), (0, -2), (2, -3).

Therefore, the sequence of transformations that produces R'S'T' from RST is translation 2 units to the right and 3 units down, followed by a rotation of 90 degrees clockwise, and finally a reflection across the x-axis.

To know more about triangle visit:

https://brainly.com/question/2773823

#SPJ1

The theorem is shown in a pythagoras theorem is c² = a² + b²

The theorem shown in the Pythagorean theorem is "a² + b² = c²". This theorem is named after the ancient Greek mathematician Pythagoras, who is credited with discovering it.

The Pythagorean theorem applies to right-angled triangles and states that the square of the length of the hypotenuse (the side opposite the right angle) is equal to the sum of the squares of the other two sides.

Mathematically, we can express this as:

c² = a² + b²

Where c is the length of the hypotenuse, and a and b are the lengths of the other two sides (called the legs) of the right-angled triangle.

Read more about pythagoras theorem at

https://brainly.com/question/231802

#SPJ1

Thus, the appropriate measure of variability found for the given data is 10.

The difference here between maximum and smallest values in a data set is known as the range. Utilizing the exact same units as the data, it measures variability. More variability is shown by larger values.

Given length of ribbons:

3, 6, 9, 11, 12, 13

Minimum value = 3

Maximum value = 13

Actually, the range, which is determined by deducting the lowest value from the greatest value in the dataset, would be the proper measure of variability for this data.

Range = Maximum value - Minimum value

Range = 13 - 3

Range = 10

Thus, the appropriate measure of variability found for the given data is 10.

Know more about the range of the data:

https://brainly.com/question/24326172

#SPJ1

The work done in lifting the lower end of the chain to the ceiling so that it is level with the upper end is 250 ft-lb.

The work done in lifting the lower end of the chain to the ceiling can be calculated using the formula for work, which is given by:

Work = force x distance

In this case, the force is the weight of the chain, which is 25 lb, and the distance is the length of the chain, which is 10 ft.

So, the work done in lifting the lower end of the chain to the ceiling is:

Work = 25 lb x 10 ft

Work = 250 ft-lb

Therefore, the work done in lifting the lower end of the chain to the ceiling so that it is level with the upper end is 250 ft-lb.

Learn more about “ lifting the lower end “ visit here;

https://brainly.com/question/14802857

#SPJ4

The work done in lifting the lower end of the chain to the ceiling so that it is level with the upper end is 125 ft-lb.

The work done in lifting the lower end of the chain to the ceiling so that it is level with the upper end is 125 ft-lb.

To find the work done in lifting the lower end of the chain to the ceiling, we need to consider the average weight of the chain as it is being lifted.

1. First, find the weight per foot of the chain:Weight of chain = 25 lbLength of chain = 10 ftWeight per foot = (25 lb) / (10 ft) = 2.5 lb/ft2.

Determine the average weight being lifted:Since you're lifting the chain from one end, the average weight you're lifting is half of the chain's total weight.

Average weight = (25 lb) / 2 = 12.5 lb3. Calculate the work done:Work done = Force x DistanceForce = Average weight = 12.5 lbDistance = Length of chain = 10 ftWork done = (12.5 lb) x (10 ft) = 125 ft-lb

So, the work done in lifting the lower end of the chain to the ceiling so that it is level with the upper end is 125 ft-lb.

to learn more about average weight click here:

brainly.com/question/27154543

#SPJ11

If the shaded area of a circle is 25 cm squared. if the diameter of the circle is 10cm, the percentage of the circle is shaded is: 31.83% .

We can start by finding the area of the entire circle. The formula for the area of a circle is:

A = πr^2

where A is the area and r is the radius. Since the diameter of the circle is 10 cm, the radius is half of that, or 5 cm. Therefore, the area of the entire circle is:

A = π(5 cm)^2 = 25π cm^2

Next, we can find what percentage of the circle is shaded by dividing the shaded area by the total area of the circle and multiplying by 100:

Percentage shaded = (shaded area / total area) x 100

Percentage shaded = (25 cm^2 / 25π cm^2) x 100

Percentage shaded = 100 / π ≈ 31.83%

Therefore, approximately 31.83% of the circle is shaded.

Learn more about percentage of the circle here:

https://brainly.com/question/23082370

#SPJ1

∠A = ∠C in trapezoid ABCD with arcAB = arcCD, can be proven with the property of isosceles triangles.

Since arcAB = arcCD, the lengths of the two arcs are equal. This implies that the lengths of the segments subtended by these arcs, AB and CD, are also equal.

Let E and F be the midpoints of the non-parallel sides AD and BC, respectively. Connect E and F with a line segment EF.

Since E and F are midpoints, DE = EA and BF = FC. In addition, since AB = CD = L, we can say that:

DE + EA = BF + FC

EA = FC

So, by the Hypotenuse-Leg (HL) theorem of congruence, triangles AEF and CFE are congruent:

ΔAEF ≅ ΔCFE

Now, since the triangles are congruent, their corresponding angles are equal:

∠A = ∠C

Find out more on trapezoids at https://brainly.com/question/26303997

#SPJ1

Sample mean in sample b to be less variable and more representative of  population mean than sample mean in sample a.

Standard error measures the variability of sample means around the population mean.

It decreases as sample size increases.

Using the formula for the standard error of the mean,

Calculate the standard errors for each sample,

Standard error of sample a

= s/√(n)

= 850/√(9)

= 283.33

Standard error of sample b

= s/√(n)

= 850/√(36)

= 141.67

Where s is the sample standard deviation

And n is the sample size.

The standard error of sample b is smaller than the standard error of sample a.

Sample mean in sample b is more likely to be closer to true population mean than sample mean in sample a.

Therefore, sample mean b is more surprising as larger sample size makes it more likely and accurately represents population mean.

learn more about sample mean here

brainly.com/question/14727460

#SPJ4

To ensure that smooth curves have no cusps, we need to require that z'(t) never vanishes. This condition ensures that the tangent line to the curve changes smoothly and continuously as we move along the curve, without any abrupt changes in direction that would create cusps.

To understand why the condition that z'(t) never vanishes is necessary to ensure that smooth curves have no cusps, we first need to understand what a cusp is. A cusp is a point on a curve where the tangent line changes direction abruptly, creating a sharp point or corner in the curve.

Now, let's consider the curve traced by the parametrization z(t) = t^2it^3 with -1 ≤ t ≤ 1. To determine whether this curve has any cusps, we need to calculate the derivative of z(t) with respect to t:

z'(t) = 2it^3 + 3t^2i

If we set z'(t) equal to zero and solve for t, we get:

2it^3 + 3t^2i = 0
t^2(2i t + 3i) = 0

This equation has two solutions: t = 0 and t = -3/2i. These are the points on the curve where z'(t) vanishes.

At t = 0, the curve passes through the origin, which is a smooth point. However, at t = -3/2i, the curve has a cusp. To see why, we can look at the behavior of z(t) near this point.

As t approaches -3/2i from either side, the magnitude of t^2 increases without bound, while the magnitude of t^3 remains constant. This means that z(t) approaches infinity along a straight line with slope -3/2i. In other words, the curve has a sharp corner or cusp at this point.

To learn more about tangent visit;

brainly.com/question/30260323

#SPJ11