Find the average of the squared distance between the origin and points in the solid cylinder D = {(x,y,z): x² + y² ≤ 25, 0 ≤ z ≤ 2}. The average of the squared distance is (Simplify your answer. Type an integer or a fraction. )

a) The table of probability is given below.

b) The expected number of suits in a 5-card hand dealt from a standard 52-card deck is 2.345.

We have to choose from four suits, so there are 4 ways to choose which suit we will get. After we have chosen a suit, we need to select 5 cards from that suit.  We can choose any combination of 5 cards from 13 cards as there are 13 cards in each suit. We can calculate this by formula for combinations: C(13,5) = 1287.

We can choose any 5 cards from the 52 cards. This can also be calculated by the formula for combinations: C(52,5) = 2598960.

The probability of getting exactly one suit in a 5-card hand will be

= 4 * C(13,5) / C(52,5) = 0.198.

We can fill the table for all possible values of X using similar calculations

value of X     probability

1    |               0.198

2    |             0.422

3    |             0.308

4    |             0.071

We need to multiply each possible value of X by its probability and then add up the results to compute the expected number of suits in a 5-card hand.

E(X) = Σ (X * P(X))

Here Σ denotes the sum over all possible values of X, and P(X) is the probability of getting X suits. When we apply this formula to the table above, we get:

E(X) = 1 * 0.198 + 2 * 0.422 + 3 * 0.308 + 4 * 0.071

= 2.345

This means that if we were to draw many 5-card hands from the deck, we would expect the average number of suits to be around 2.345.

To know more about probability;

brainly.com/question/11234923

#SPJ4

Answer:

87

Step-by-step explanation:

first you need to know the median is the middle of the data set.

so 81, 83, 91, 94 the middle is 83 and 91 but you match inbetween both of those so the answer would be 87.

Hope this helps!! good luck

The y-coordinate of the point that partitions segment AC into a 1:2 ratio is given as follows:

y = 5.

The y-coordinate of the point that partitions segment AC into a 1:2 ratio is obtained applying the proportions in the context of the problem.

The segment AC is partitioned into a 1:2 ratio, hence the equation for the coordinates of P are given as follows:

P - A = 1/3(C - A).

The coordinates of A and C are given as follows:

A(1,3) and C(6,9).

Hence the y-coordinate of B is obtained as follows:

y - 3 = 1/3(9 - 3)

y - 3 = 2

y = 5.

More can be learned about proportions at https://brainly.com/question/24372153

#SPJ1

Answer:

m = +/- 5

Step-by-step explanation:

We can solve the equation by taking the fourth root of both sides.  

[tex]+/-\sqrt[4]{m^4}=+/-\sqrt[4]{625} \\m=5\\m=-5[/tex]

(5)(5)(5)(5) = 625

(-5)(-5)(-5)(-5) = 625

The +/- in the answers come from the fact that whenever you have a even exponent (e.g., x^2 or m^4), you always get a positive answer, even if the base you're raising to the particular exponent is negative

Amaya made a mistake because 4 is not equal to 5. She incorrectly wrote 4=5 in the final step of solving the equation 8x+4=9+4(2x-1). So, the correct answer is A).

In step 1, Amaya sets up the equation 8x+4=9+4(2x-1).

In step 2, she simplifies the right side of the equation to 9+8x-4=5+8x.

In step 3, she subtracts 8x from both sides of the equation to get 4=5.

In step 4, she simplifies the equation to 4=9-4.

In step 5, she mistakenly writes that 4=5, which is incorrect.

Therefore, the correct choice is that Amaya made a mistake because 4 is not equal to 5. So, the correct option is A).

To know more about solving the equation:

https://brainly.com/question/23036590

#SPJ1

The experimental probability that the next time Audra rolls the number cube, she will roll a 2 is 3/22.

Experimental probability is the ratio of the number of times an event occurs to the total number of trials conducted. In this case, we want to find the experimental probability of rolling a 2.

Looking at the data provided, we can see that Audra rolled a 2 three times out of the total 22 rolls. So, the experimental probability of rolling a 2 can be calculated as:

Experimental probability = number of times the event occurred / total number of trials

Experimental probability of rolling a 2 = 3 / 22

Therefore, the correct option is (B) 3/22. This means that based on Audra's experiment, the probability of rolling a 2 is approximately 0.136 or 13.6%. It is important to note that this is the experimental probability based on a small sample size, and the actual probability of rolling a 2 in a large number of rolls may differ.

To know more about probability,

https://brainly.com/question/30034780

#SPJ11

Stephen's net income is $287.78.

Stephen earns $11 per hour at his job and worked for 32 hours. The gross income (income before deduction) is:

gross income = 11 * 32 = $352

Stephen's net income is the money left afer deducting federal income tax, Social Security, and Medicare.

Net income = $352 -  $37.30 -  $21.82 -  $5.10

Net income = $287.78

Learn more about  net income on:

https://brainly.com/question/15530787

#SPJ1

Answer:

44 degrees

Step-by-step explanation:

To solve this problem you can subtract 70 by 26. You can do this because those two angles add to the more significant angle. Therefore, to solvr this all you have to do is subtract 70-26. Doing so gives you your answer of 44 degrees

In a PivotTable, you can group data by date or number field types. To do this, follow these steps:

1. Select your PivotTable by clicking on any cell within it.
2. Choose the date or number field you want to group.
3. Right-click the selected field and click "Group" from the context menu.
4. In the Grouping dialog box, specify the grouping options based on your preferences (e.g., grouping by months, years, or specific intervals).
5. Click "OK" to apply the grouping.

Please note that grouping data by calculated, filtered, logical parameters, text, incremental, or value field types is not directly supported in a PivotTable.

To learn more about PivotTable

https://brainly.com/question/30154540

#SPJ11

To find the rate of depreciation after 2 years, we need to find the derivative of this function at t = 2.
V(t) = 23,351(0.783)^t
V'(t) = 23,351(0.783)^t * ln(0.783)  [Using the chain rule]

V'(2) = 23,351(0.783)^2 * ln(0.783) ≈ -2,346.29

Since we are interested in the absolute value of the rate of depreciation, we can ignore the negative sign. Therefore, the car is depreciating at $2,346.29 per year (rounded to the nearest cent).

Note that this is the instantaneous rate of depreciation at t = 2. The average rate of depreciation over the first two years would be the difference in resale value divided by the number of years, which would be:

[(23,351(0.783)^2) - 23,351] / 2 ≈ $2,336.67 per year
Hi! To find the rate of depreciation after 2 years, we need to first determine the resale value of the car after 2 years and then find the difference in value per year. Here's a step-by-step explanation:

1. Plug in the given years (t=2) into the formula for the estimated resale value: V(t) = 23,351(0.783^t)
2. Calculate the resale value after 2 years: V(2) = 23,351(0.783^2) ≈ 14,342.76 (rounded to the nearest cent)
3. Find the depreciation value by subtracting the resale value from the initial value: Depreciation = Initial Value - Resale Value = 23,351 - 14,342.76 ≈ 9,008.24
4. Calculate the rate of depreciation per year: Rate of Depreciation = Depreciation / Years = 9,008.24 / 2 ≈ 4,504.12

The car is depreciating at approximately $4,504.12 per year after 2 years, rounded to the nearest cent.

Learn more about :

Depreciation : brainly.com/question/29748690

#SPJ11

The required value of x in the given equation is -0.00047.

Let's first simplify the expression inside the parentheses:

-33x+1 = 1-33x

Now, we can substitute this back into the original equation and use order of operations (PEMDAS) to simplify:

4.76 - (23 x 51)-1(-33x+1) = 4.76 - (23/51)(1-33x)

= 4.76 - (23/51) + (23/17)x

Now, we want to solve for x. We'll start by isolating the term with x on one side of the equation:

(23/17)x = 4.76 - (23/51)

x =-0.00047

Therefore, the value of x in the given equation is -0.00047.

Learn more about equations here:

brainly.com/question/11536910

#SPJ1

Answer:

The mass of the car rounded to the nearest kilogram is 1990 kg, which has an error interval of 1989.5 kg ≤ car mass < 1990.5 kg.

The mass of the person rounded to 1 decimal place is 58.7 kg, which has an error interval of 58.65 kg ≤ person mass < 58.75 kg.

To find the error interval for the combined mass, we need to add the lower and upper bounds of the two intervals:

1989.5 kg + 58.65 kg = 2048.15 kg

1990.5 kg + 58.75 kg = 2049.25 kg

Therefore, the error interval for the combined mass, m, of the car and the person is: 2048.15 kg ≤ m < 2049.25 kg

Answer:

To find the error interval for the combined mass of the car and the person, we need to consider the possible maximum and minimum values for the masses.

For the car, since it is rounded to the nearest kilogram, the actual mass could be anywhere between 1989.5 kg and 1990.5 kg.

For the person, since it is rounded to 1 decimal place, the actual mass could be anywhere between 58.65 kg and 58.75 kg.

To find the maximum and minimum combined masses, we add the maximum possible mass of the car (1990.5 kg) to the maximum possible mass of the person (58.75 kg) and we add the minimum possible mass of the car (1989.5 kg) to the minimum possible mass of the person (58.65 kg):

Maximum combined mass = 1990.5 kg + 58.75 kg = 2049.25 kg

Minimum combined mass = 1989.5 kg + 58.65 kg = 2048.15 kg

Therefore, the error interval for the combined mass, m, of the car and the person is:

2048.15 kg ≤ m < 2049.25 kg

Answer:

x = -6

Step-by-step explanation:

you have given

10x + 8y = 12 and 4x + y = -15

so you must put the one var. x or y by same cofficent and in opposite sighn

so 10x + 8y = 12

- 8 (4x + y = -15 ) ......... i multiplied by -8

10x + 8y = 12

-32x - 8y = 120

then you will add the equation

(10x + 8y) + (-32x - 8y) = 12 + 120

afeter you simlify it u will get

-22x = 132

-22x = 132

x = -6 .... by dividing both sides by -22

Answer:

(-6,9)

Step-by-step explanation:

Multiply 4x + y = -15 all the say through by -8 and then add to 10x + 8y = 12

-32x -8y =  120

10x + 8y = 12

-22x =  132  Divide both sides by -22

x = -6

Substitute -6 for x

4x + y = -15

4(-6) + y = -15

-24 + y = -15  Add 24 to both sides

y = 9

Check

10x + 8y = 12

10(-6) + 8(9) = 12

-60 + 72 = 12

12 = 12  checks

4x + y = -15

4(-6) + 9 = -15

-24 + 9 = -15

-15 = -15 Checks.

Helping in the name of Jesus.

An expression that represents the length of one side of the square is √(12x/35).

In Mathematics and Geometry, the area of a square can be calculated by using this mathematical equation (formula);

A = x²

Where:

By substituting the given parameters into the formula for the area of a square, we have the following;

-12x + 36x² = x²

36x² - x² = 12x

35x² = 12x

x = √(12x/35)

Read more on expression and square here: https://brainly.com/question/16506342

#SPJ1

The 98% confidence interval for the population mean is (1473.06, 1806.94).

The parameters needed to calculate a confidence interval are:

Sample mean (x) = 1640

Population standard deviation (σ) = 325

Sample size (n) = 25

Confidence level = 98%

To find the confidence interval, we can use the formula:

CI = x ± z*(σ/√n)

where z* is the z-score associated with the desired confidence level.

Since the confidence level is 98%, we need to use the z-score associated with a tail probability of 0.01 (0.5% on each tail). From the table given, this is z0.005 = 2.576.

Substituting the values, we get:

CI = 1640 ± 2.576*(325/√25) = 1640 ± 166.94

Therefore, the 98% confidence interval for the population mean is (1473.06, 1806.94).

Learn more about confidence interval at https://brainly.com/question/31684473

#SPJ11

The function graphed is defined as follows:

y = -2(x - 2)² + 3.

The equation of a parabola of vertex (h,k) is given by the equation presented as follows:

y = a(x - h)² + k.

In which a is the leading coefficient.

The coordinates of the vertex in this problem are given as follows:

(2,3).

Hence the parameters are h = 2 and k = 3, thus:

y = a(x - 2)² + 3

When x = 0, y = -5, hence the leading coefficient a is obtained as follows:

-5 = 4a + 3

4a = -8

a = -2.

Thus the equation is:

y = -2(x - 2)² + 3.

More can be learned about quadratic functions at https://brainly.com/question/1214333

#SPJ1

The stereo system installer needs 170 ft of speaker wire.

In this case, the two diagonals of the rectangular room are the longest sides of two right triangles. The length of one diagonal can be found by:

d1 = √(40² + 75²)

d1 = √(1600 + 5625)

d1 = √7225

d1 = 85 ft

Similarly, the length of the other diagonal is also 85 ft.

Total speaker wire = 2 × 85 ft = 170 ft

So, the stereo system installer needs 170 ft of speaker wire.

Learn more about word problem on

https://brainly.com/question/21405634

#SPJ1

The maximum height of the toy plane is approximately 6.5 meters. Option A is correct.

The maximum height of the toy plane can be determined using the laws of motion and basic kinematics.

The equation for the height of the toy plane as a function of time, assuming no air resistance, can be represented by a quadratic equation in the form of;

h(t) = [tex]h_{0}[/tex] + [tex]V_{0}[/tex]t - (1/2)[tex]gt^{2}[/tex]

where; h(t) is the height of the plane at time t,

[tex]h_{0}[/tex] is the initial height (given as 4 meters),

[tex]V_{0}[/tex] is the initial velocity (given as 7 meters per second),

g is the acceleration due to gravity (which is approximately 9.8 m/s² on Earth), and

t is the time.

To find the maximum height of the plane, we need to determine the time at which the plane reaches its highest point. At this point, the vertical velocity of the plane becomes zero, before it starts to fall back to the ground.

The vertical velocity of the plane can be represented as;

[tex]V_{(t)}[/tex] = [tex]V_{0}[/tex]  -  [tex]g_{t}[/tex]

Setting v(t) to zero and solving for t, we get:

0 =[tex]V_{0}[/tex]  - [tex]g_{t}[/tex]

[tex]g_{t}[/tex] = [tex]V_{0}[/tex]

t = [tex]V_{0}[/tex]  / g

Substituting the given values for [tex]V_{0}[/tex]  and g into the equation;

t = 7 m/s / 9.8 m/s²

t ≈ 0.714 seconds

So, the time taken for the toy plane to reach its highest point is approximately 0.714 seconds.

Now, we can substitute this value of t into the equation for h(t) to find the maximum height of the plane;

[tex]h_{(t)}[/tex]  =  [tex]h_{0}[/tex] + [tex]V_{0}[/tex] t - (1/2)[tex]gt^{2}[/tex]

[tex]h_{(t)}[/tex] = 4 m + 7 m/s × 0.714 s - (1/2) × 9.8 m/s² × (0.714 s)²

Calculating the above expression, we get:

[tex]h_{(t)}[/tex]  ≈ 6.46 meters

Therefore, the maximum height of the toy plane is near by 6.5 meters.

Hence, A. is the correct option.

To know more about maximum height here

https://brainly.com/question/9315508

#SPJ1

The 90% confidence interval for the average fee for checking a single bag is $21.71 to $28.29, which corresponds to option B) $25 + $3.29

To calculate a 90% confidence interval for the average fee for checking a single bag.

To calculate a 90% confidence interval, we need the sample mean (X), the standard deviation (σ), and the sample size (n). From your question, we have:

X = $25
σ = $6
n = 9

Since we know the standard deviation, we can use the z-score for a 90% confidence interval, which is 1.645 (you can find this in a standard z-table).

Next, we need to calculate the standard error (SE), which is the standard deviation divided by the square root of the sample size:

[tex]SE=\frac{σ}{\sqrt{n} }[/tex]
[tex]SE=  \frac{ 6}{\sqrt{9} }[/tex]
[tex]SE=  \frac{ 6}{3 }[/tex]
SE = $2

Now, multiply the z-score by the standard error:

Margin of Error (ME) = 1.645 × SE
ME = 1.645 × $2
ME = $3.29

Finally, construct the 90% confidence interval by adding and subtracting the margin of error from the sample mean:

Lower Limit: X - ME = $25 - $3.29 = $21.71
Upper Limit: X + ME = $25 + $3.29 = $28.29

Thus, the 90% confidence interval for the average fee for checking a single bag is $21.71 to $28.29, which corresponds to option B) $25 + $3.29.

To know more about "Standard deviation" refer here:

https://brainly.com/question/23907081#

#SPJ11

The answer is: True. When matrix A is upper triangular, its eigenvalues are located on its main diagonal. If you find the eigenvectors corresponding to each eigenvalue, you can construct an eigenvector matrix S.

An upper triangular matrix is a square matrix in which all entries below the main diagonal are zero. An eigenvector of a matrix A is a nonzero vector x such that Ax is a scalar multiple of x. That is, there exists a scalar λ such that Ax = λx.
For a complete upper triangular matrix, all of its eigenvalues are on the diagonal. To see this, consider the characteristic polynomial of a complete upper triangular matrix:
p(λ) = det(A - λI)
where I is the identity matrix. Since A is upper triangular, its determinant is the product of its diagonal entries, and det(A - λI) is a polynomial of degree n (the size of the matrix) in λ. Therefore, there are n roots of p(λ), which correspond to the eigenvalues of A. Since A is completely upper triangular, all of its eigenvalues are on the diagonal.

Now, let's consider the eigenvector matrix S of A. This is a matrix whose columns are the eigenvectors of A. Since A is upper triangular, any eigenvector of A must also be upper triangular (or zero). Therefore, the eigenvector matrix S must also be upper triangular. In summary, if a is a complete upper triangular matrix, then all of its eigenvalues are on the diagonal, and its eigenvector matrix S is upper triangular. Therefore, the statement is true.
"If A is a complete upper triangular matrix, then it has an upper triangular eigenvector matrix S." When a matrix A is upper triangular, its eigenvalues are located on its main diagonal. If you find the eigenvectors corresponding to each eigenvalue, you can construct an eigenvector matrix S. Since A is upper triangular, the eigenvector matrix S will also be upper triangular.

Learn more about matrix here: brainly.com/question/28180105

#SPJ11

28°49€  arc unit into time is approximately 1.867 hours.

We'll convert the given angles from degrees, minutes, and seconds (or cents and euros as placeholders) to degrees in decimal form. Then, we'll convert the angle from arc units to time units.

a) 39°50¢
To convert 50¢ to degrees, divide by 60 (since 1 degree = 60 minutes):
50¢ / 60 = 0.8333 (rounded to four decimal places)

So, 39°50¢ in decimal form is:
39 + 0.8333 = 39.8333°

b) 42°35¢
To convert 35¢ to degrees:
35¢ / 60 = 0.5833 (rounded to four decimal places)

So, 42°35¢ in decimal form is:
42 + 0.5833 = 42.5833°

c) 15°20€
To convert 20€ to degrees (1 degree = 3600 seconds):
20€ / 3600 = 0.0056 (rounded to four decimal places)

So, 15°20€ in decimal form is:
15 + 0.0056 = 15.0056°

d) 1°59€
To convert 59€ to degrees:
59€ / 3600 = 0.0164 (rounded to four decimal places)

So, 1°59€ in decimal form is:
1 + 0.0164 = 1.0164°

Now, we'll convert 28°49€ from arc units to time units:
28°49€ = 28 + (49 / 3600) = 28.0136° (in decimal form)

To convert degrees to time units, multiply by 24 (since there are 24 hours in a day) and divide by 360 (since there are 360 degrees in a circle):

28.0136° * (24 / 360) = 1.867 (rounded to three decimal places)

So, 28°49€ in time units is approximately 1.867 hours.

To learn more about degree

https://brainly.com/question/8306416

#SPJ11

The surface area of a surface parametrized by a function f(s, t), we use the formula:

Surface Area = ∫∫ √[f_s(s,t)^2 + f_t(s,t)^2 + 1] ds dt

The formula above calculates the surface area by integrating the square root of the sum of the squares of the partial derivatives of f with respect to s and t, plus one, over the surface.

Essentially, the formula is finding the magnitude of the gradient of the surface, which gives the rate of change of the surface in all directions.

Surface Area = ∫∫ √[f_s(s,t)^2 + f_t(s,t)^2 + 1] ds dt

The surface area formula can be used to find the surface area of various types of surfaces, such as parametric surfaces, implicit surfaces, and surfaces of revolution.

However, the integration required to evaluate the formula can be quite challenging, especially for complex surfaces. In such cases, numerical methods may be used to approximate the surface area.

Learn more about Surface area:

brainly.com/question/29298005

#SPJ11

The value of x that would make M the midpoint of PQ if PM = 3x-1 and PQ = 5x+3 include the following: 2.

In Mathematics, the midpoint of a line segment with two end points can be calculated by adding each end point on a line segment together and then divide by two (2).

Since M is the midpoint of line segment PO, we have the following:

Line segment PM = Line segment PQ

3x - 1 = 5x + 3

5x - 3x = 3 + 1

2x = 4

x = 4/2

x = 2

PM = 3x - 1 = 3(2) - 1 = 6 - 1 = 5 units.

PQ = 5x + 3 = 5(2) + 3 = 10 + 3 = 13 units.

Read more on midpoint here: brainly.com/question/17918978

#SPJ1

The  area of the lateral face of cylinder = 150.79 ft²

The  area of the two bases of the cylinder = 56.55 ft²

The total surface area of the cylinder =  207.34  ft²

We know that the formula for the surface area of cylinder is:

A = 2πrh + 2πr²

where r is the radius of the cylinder

and h is the height of the cylinder

Here, r = 3 ft and h = 8 ft

The area of the lateral face of cylinder would be,

A₁ = 2 × π × r × h

A₁ = 2 × π × 3 × 8

A₁ = 48 × π

A₁ = 150.79 sq. ft.

And the area of two bases is,

A₂ = 2πr²

A₂ = 2 × π × 3²

A₂ = 18 × π

A₂ = 56.55 sq. ft.

The total surface area of cylinder would be,

A = A₁ + A₂

A = 150.79 + 56.55

A = 207.34 sq. ft.

Therefore, the required surface area of cylinder = 207.34 ft²

Learn more about the area of cylinder here:

https://brainly.com/question/22074027

#SPJ1

Answer:

The type of study conducted is an observational study. The response variable of the study is the concentration of the chemical.

The number of frames that the welders would be able to complete in 4 hours would be 10 frames.

The time taken by one welder is 8 hours for one frame which means the work rate would be:

= 1 / 8

= 1 / 8 frames per hour

If we have 20 welders therefore, the work rate per hour would be :

= 1 / 8 x 20

= 2. 5 frames per hour

Given 4 hours, the number of frames they would make is:

= 2. 5 x 4 hours

= 10 frames

Find out more on welding at https://brainly.com/question/16180158

#SPJ1

First part of question is:

A welding company produces burglar frames for windows and doors. In order to complete one frame, one welder needs 8 hours.

To prove that 12 | n^2 - 1 for all values where n = 6k + 1, we can use modular arithmetic.

First, let's simplify n^2 - 1:

n^2 - 1 = (6k + 1)^2 - 1
= 36k^2 + 12k
= 12(3k^2 + k)

So we need to show that 12 divides (3k^2 + k) for all values of k.

We can use modular arithmetic to prove this. Let's consider k modulo 3:

If k ≡ 0 (mod 3), then 3k^2 + k ≡ 0 (mod 3).
If k ≡ 1 (mod 3), then 3k^2 + k ≡ 4 (mod 3).
If k ≡ 2 (mod 3), then 3k^2 + k ≡ 2 (mod 3).

So in all cases, 3k^2 + k ≡ 0 (mod 3) or 3k^2 + k is divisible by 3.

Now let's consider k modulo 4:

If k ≡ 0 (mod 4), then 3k^2 + k ≡ 0 (mod 4).
If k ≡ 1 (mod 4), then 3k^2 + k ≡ 0 (mod 4).
If k ≡ 2 (mod 4), then 3k^2 + k ≡ 2 (mod 4).
If k ≡ 3 (mod 4), then 3k^2 + k ≡ 0 (mod 4).

So in all cases, 3k^2 + k is divisible by 4 if k is even, and if k is odd then 3k^2 + k is divisible by 2.

Therefore, 3k^2 + k is always divisible by 12, and so n^2 - 1 = 12(3k^2 + k) is always divisible by 12 when n = 6k + 1.

#SPJ11

Learn more on: https://brainly.com/question/28551149

The rate of increase in water pressure in  atmospheres 0.000992 atm/km.

To find the rate of increase in water pressure in atm/km, we need to convert the given rate of increase from atm/m to atm/km.

[tex]1 km = 1000 m[/tex]

So, we can convert the given rate of increase as follows:

[tex]0.992 atm/m = (0.992 atm/m)[/tex] × [tex](1000 m/km)[/tex]

[tex]= 992 atm/km[/tex]

Therefore, the rate of increase in water pressure in atm/km is 992 atm/km.

We must convert the stated rate of increase in water pressure from atm/m to atm/km in order to determine the rate of increase in atm/km.

We are aware that 1000 metres make up 1 kilometre. As a result, we can translate the supplied water pressure rise rate from atm/m to atm/km as follows:

[tex]0.000992 atm/km = 0.992 atm/m[/tex] × [tex](1 km/1000 m)[/tex]

0.000992 atm/km is the rate of rise in water pressure as a result.

To learn more about water pressure  visit:

https://brainly.com/question/14421220

#SPJ4

Complete Question:

The water pressure on Mustafa as he dives is increasing at a rate of

0. 992, atmospheres left parenthesis, start text, a, t, m, end text, right parenthesis per meter left parenthesis, start text, m, end text, right parenthesis. What is the rate of increase in water pressure in  atmospheres?