find the lengths of the diagonals, do not round

lower left to upper right: ?
lower right to upper left?

using the lengths of the diagonals, is the trapezoid isosceles?

The end behaviour of the given cubic polynomial function as required to be determined is; As x tends to negative infinity, f(x) tends to negative infinity, As x tend to infinity, f(x) tends to infinity.

It follows from the task content that the end behaviour of the given polynomial function is to be determined.

As evident from the task content; the polynomial is of degree 3 and the leading coefficient is; 2.

On this note, since the polynomial is of degree 3 which is odd and the leading coefficient is positive; it follows that the end behaviour is such that; As x tends to negative infinity, f(x) tends to negative infinity, As x tend to infinity, f(x) tends to infinity.

Read more on end behaviour;

https://brainly.com/question/4685884

#SPJ1

The diameter of the given circle with a circumference of 28.6 centimeters is approximately 9.11 cm.

The circumference of a circle is given by the simple formula: C = πd, where C is the circumference, π is the constant pi and d is the diameter of the circle.

Given that the circumference of the circle is 28.6 cm, we can use the formula to find the diameter:

28.6 = πd

d = 28.6/π

Using 3.14 as an approximation for π, we get:

d ≈ 28.6/3.14 ≈ 9.11

Therefore, the diameter of the circle is approximately 9.11 cm.

Learn more about diameter

https://brainly.com/question/28162977

#SPJ4

The error mean square would then be given by the term of 2.71 which is option B.

In statistics, in addition to the mode and median, the mean is one of the measures of central tendency. Simply said, the mean is the average of the values in the given collection. It indicates that values in a certain data collection are distributed equally.

The three most often employed measures of central tendency are the mean, median, and mode. The total values provided in a datasheet must be added, and the sum must be divided by the total number of values in order to get the mean. When all of the values are organised in ascending order, the Median is the median value of the provided data.

Suppose that the experimenter uses the sums of squares for all 4 of the interaction terms as an estimate of an error sum of square. The error mean square would then be 2.71

Learn more about Mean:

https://brainly.com/question/20118982

#SPJ4

The total number of ordered pairs (A,B) such that |A|+|B|=4 is:

1x5 + 10x6 + 10x10 + 5x1 = 141

So the answer is 141.

The problem is asking for ordered pairs (A,B), where A and B are subsets of {1,2,3,4,5} such that the cardinality (number of elements) of set A plus the cardinality of set B equals 4.

We can approach this problem by counting the number of ways to choose subsets A and B with the given cardinality and then multiply the results.

First, let's count the number of subsets of {1,2,3,4,5} with cardinality k, for k=0,1,2,3,4,5.

k=0: there is only one subset with no elements, the empty set.

k=1: there are 5 subsets with one element, namely {1},{2},{3},{4},{5}.

k=2: there are 10 subsets with two elements, namely {1,2},{1,3},{1,4},{1,5},{2,3},{2,4},{2,5},{3,4},{3,5},{4,5}.

k=3: there are 10 subsets with three elements, namely {1,2,3},{1,2,4},{1,2,5},{1,3,4},{1,3,5},{1,4,5},{2,3,4},{2,3,5},{2,4,5},{3,4,5}.

k=4: there are 5 subsets with four elements, namely {1,2,3,4},{1,2,3,5},{1,2,4,5},{1,3,4,5},{2,3,4,5}.

k=5: there is only one subset with five elements, the whole set {1,2,3,4,5}.

Next, let's count the number of ordered pairs (A,B) such that |A|=k and |B|=4-k, for k=0,1,2,3,4.

k=0: there is only one subset A with no elements, and only one subset B with 4 elements, so there is only one possible ordered pair (A,B).

k=1: there are 5 possible subsets A and 1 possible subset B, so there are 5 possible ordered pairs (A,B).

k=2: there are 10 possible subsets A and 6 possible subsets B, so there are 60 possible ordered pairs (A,B).

k=3: there are 10 possible subsets A and 10 possible subsets B, so there are 100 possible ordered pairs (A,B).

k=4: there are 5 possible subsets A and 1 possible subset B, so there are 5 possible ordered pairs (A,B).

Therefore, the total number of ordered pairs (A,B) such that |A|+|B|=4 is:

1x5 + 10x6 + 10x10 + 5x1 = 141

So the answer is 141.

To learn more about cardinality visit:

https://brainly.com/question/29093097

#SPJ11

The sequence (an bn)nen is convergent given that |an| < 135642 for all n e N and (bn)nen converges to 0.

To prove the convergence of the sequence (an bn)nen, we need to show that it is a Cauchy sequence. Let ε > 0 be arbitrary. Since (bn)nen converges to 0, there exists a natural number N such that |bn| < ε for all n ≥ N. Also, since |an| < 135642 for all n, we have

|an bn - am bm| = |an(bn - bm) + (an - am)bm|

≤ |an||bn - bm| + |an - am||bm|

< 135642ε + |an - am|ε

We can make the first term less than ε/2 by choosing n and m large enough so that |bn - bm| < ε/(2×135642), which is possible by the convergence of (bn)nen to 0.

For the second term, we can make it less than ε/2 by choosing n and m large enough so that |an - am| < ε/(2M), where M is any upper bound for the sequence (|an|)nen. Then we have

|an bn - am bm| < ε

for all n, m ≥ max(N, N') where N' corresponds to ε/(2M). Therefore, the sequence (an bn)nen is a Cauchy sequence, and since R is complete, it converges to some limit L.

To know more about convergent series:

https://brainly.com/question/15415793

#SPJ4

The combined length of two boards is 93/100 or 0.93 of a meter based on the length of two boards.

The combined length of the two boards will be calculated by finding sum of their lengths. The formula that will form is -

Combined length = length of first board + length of second board

Keep the values in formula

Combined length = 7/10 + 23/100

Solving the sum

Total length = (7×10) + 23/100

Solving the parenthesis

Combined length = (70 + 23)/100

Performing addition

Total length = 93/100

Thus, the combined length of the shelf is 93/100 of a meter.

Learn more about sum -

https://brainly.com/question/5982761

#SPJ4

The derivative of the function y = t*tan(x) - phi^2 with respect to x is dy/dx = t*sec^2(x).

Find the derivative dy/dx for the given function y = tan(x) - phi^2. Please note that there seems to be a typo in the function, so I'll assume that "phi kuadrat" should be "phi squared" and rewrite the function as y = t*tan(x) - phi^2.

To find the derivative dy/dx, we'll apply the rules of differentiation to each term separately:

1. Differentiate tan(x) with respect to x:
  Since t is a constant, we only need to differentiate tan(x) which is sec^2(x). So, the derivative of t*tan(x) is t*sec^2(x).

2. Differentiate phi^2 with respect to x:
  Since phi^2 is a constant, its derivative is 0.

Now, combine the derivatives of both terms:

dy/dx = t*sec^2(x) - 0

Simplify the answer:

dy/dx = t*sec^2(x)

So, the derivative of the function y = t*tan(x) - phi^2 with respect to x is dy/dx = t*sec^2(x).

Derivativehttps://brainly.com/question/31274566

#SPJ11

Answer:

The value of a is 2 since 2/4 = 1/2.

The correct answer is option C: 27.6 to 29.6 pounds.

To calculate the 95% confidence interval for the true mean weight, μ, of all packages received by the parcel service, we can use the following formula:

CI = X ± (tα/2)(s/√n)

where:

X is the sample mean weight

tα/2 is the t-value from the t-distribution with (n - 1) degrees of freedom and α/2 level of significance (α/2 = 0.025 for a 95% confidence interval)

s is the sample standard deviation of weights

n is the sample size

We are given that the sample size is n = 49 and the sample mean weight is X = 28.6 pounds. We do not have the sample standard deviation, so we will assume it is unknown and use a t-distribution to estimate the standard error of the sample mean.

We want to calculate the 95% confidence interval, so α/2 = 0.025 and the degrees of freedom are (n - 1) = 48. From a t-distribution table, the t-value for a 95% confidence interval with 48 degrees of freedom is approximately 2.01.

Now we need to estimate the sample standard deviation, s, using the sample data. We can use the formula:

s = sqrt[ Σ(xi - X)² / (n - 1) ]

where xi is the weight of the ith package in the sample.

Without the actual data values, we cannot compute the exact value of s, but we can estimate it using the sample variance. We know that:

s² = Σ(xi - X)² / (n - 1) = (49 - 1) / 48 * s²

So, an estimate of s is:

s = sqrt[ (SS / (n - 1)) ] = sqrt[ (Σ(xi - X)² / (n - 1)) ]

where SS is the sum of squares of deviations of the sample data from the mean.

Assuming the sample standard deviation is unknown and using the above formula, we can estimate s as:

s ≈ 2.7 pounds

Substituting the known values into the formula for the confidence interval, we have:

CI = X ± (tα/2)(s/√n)

= 28.6 ± (2.01)(2.7/√49)

= 28.6 ± 0.99

Therefore, the 95% confidence interval for the true mean weight, μ, of all packages received by the parcel service is (28.6 - 0.99, 28.6 + 0.99), or approximately (27.6, 29.6) pounds.

So, the correct answer is option C: 27.6 to 29.6 pounds.

To learn more about weight visit:

https://brainly.com/question/10069252

#SPJ11

74% of the trials are completed within 20 days (rounded to the nearest whole number).

b. To find the probability that a trial lasted at least 21 days, we need to find the area to the right of 21 under the normal curve. Using a standard normal table or calculator, we can find:

z = (21 - 22) / 6 = -0.1667

P(X ≥ 21) = P(Z ≥ -0.1667) = 0.5675

So the probability that a trial lasted at least 21 days is 0.5675.

c. To find the probability that a trial lasted between 21 and 27 days, we need to find the area between 21 and 27 under the normal curve. Again using a standard normal table or calculator, we can find:

z1 = (21 - 22) / 6 = -0.1667

z2 = (27 - 22) / 6 = 0.8333

P(21 ≤ X ≤ 27) = P(-0.1667 ≤ Z ≤ 0.8333) = 0.3454

So the probability that a trial lasted between 21 and 27 days is 0.3454.

d. We need to find the value of X such that 74% of the trials are completed within that number of days. Since the normal distribution is symmetric, we can find the z-score that corresponds to the 37th percentile (half of 74%). Using a standard normal table or calculator, we can find:

P(Z ≤ z) = 0.37

z = -0.3528

Now we can use the z-score formula to find X:

z = (X - μ) / σ

-0.3528 = (X - 22) / 6

X - 22 = -2.1168

X = 19.8832

So 74% of the trials are completed within 20 days (rounded to the nearest whole number).

To learn more about number visit:

https://brainly.com/question/3589540

#SPJ11

The map that shows the picnic table in the correct location is illustrated below.

Firstly, we need to understand the concept of scale on a map. Maps are often drawn to scale, which means that the distances between different points on the map represent a proportional distance in real life. For instance, if one inch on the map equals one mile in real life, then two inches on the map would represent two miles in real life.

To do this, we need to locate the campsite on the map and measure out 1.5 miles along Path A. Once we have done this, we can mark this location on the map as the location of the picnic table.

However, we need to make sure that we are using a map that is drawn to scale. Otherwise, we might not be able to accurately measure the distance and locate the picnic table correctly.

Therefore, we need to examine the different maps that we have and find one that is drawn to scale. Once we have found a suitable map, we can measure out the distance from the campsite to the location of the table along Path A, and mark it on the map.

Finally, we can compare the location we have marked on the map with the location of the table as described in the problem. If they match up, we have found the correct location of the table on the map.

To know more about table here

https://brainly.com/question/17084863

#SPJ1

The probability that both the man and the woman will be alive fifty years later is 0.176.

Since, The probability of that both the man and woman will be alive fifty years later, we have to multiply the two probabilities together as they are independent events.

So, We get;

P(both alive after fifty years) = P(man alive after fifty years) x P(woman alive after fifty years)

P = 0.352 x 0.500

P = 0.176

Therefore, the probability that both the man and the woman will be alive fifty years later is 0.176.

Learn more about the probability visit:

https://brainly.com/question/13604758

#SPJ1

The relation that has the  domain {-3, 4} and the range {0, 1} is B:

{( −3, 1), (4, 0)}

Remember that for any relation, the domain is the set of the inputs and the range is the set of the outputs, and the general notation for a point is (input, output).

Then if the domain is {-3, 4} and the range is {0, 1} the only of the given relations that can be described by these is:

B. {( −3, 1), (4, 0)}

So that is the correct option.

Learn more about domain and range:

https://brainly.com/question/10197594

#SPJ1

To find the coordinates of the endpoints of the image A'B' (A9B9) after dilation of AB by a scale factor of 2 centered at (3,5), follow these steps:

Step 1: Use the given scale factor (2) and center of dilation (3,5).

Step 2: Apply the dilation formula to the coordinates of the original points A and B. The formula for dilation with scale factor k centered at (h,k) is:

A'(x', y') = (h + k(x - h), k + k(y - k))

Step 3: Substitute the given options for A9 and B9 into the dilation formula and check which pair of coordinates satisfy the formula.

After applying the formula, it is determined that the coordinates of the endpoints of the image A9B9 after dilation with a scale factor of 2 centered at (3,5) are:

A9(21, 6) and B9(7, 4).

Option (2) is correct.

Learn more about coordinates :

https://brainly.com/question/12617743

#SPJ11

The 80% confidence interval for the true population mean income for households in Charleston County is $30,749 to $32,987 (rounded to the nearest dollar).

We can use the t-distribution to find the confidence interval since the population standard deviation is unknown and the sample size is less than 30.

First, we need to find the t-value for a 80% confidence level with 58 degrees of freedom (sample size - 1). We can use a t-table or a calculator to find this value. Using a calculator, we get:

t-value = 1.670

Next, we can use the formula for a confidence interval:

CI = X ± t-value * (S / √n)

where X is the sample mean, S is the sample standard deviation, n is the sample size, and t-value is the critical value from the t-distribution.

Plugging in the values we get:

CI = 31,868 ± 1.670 * (5,749 / √59)

Simplifying, we get:

CI = 31,868 ± 1,119

Therefore, the 80% confidence interval for the true population mean income for households in Charleston County is $30,749 to $32,987 (rounded to the nearest dollar).

To learn more about Charleston visit:

https://brainly.com/question/16049508

#SPJ11

The inverse function in slope-intercept form (mx+b) of function f(x) = -3/5x + 6 is -5/3x + 10.

To find the inverse of a function, we start by swapping the x and y variables. Then, we solve the equation for y.

In this case, the inverse function is g(x) = (5/3)x + 6, which is in slope-intercept form (mx+b) with m=5/3 and b=6.

Swapping x and y, we get x = -3/5y + 6.

Now, we solve for y:

x - 6 = -3/5y

-5/3(x - 6) = y

So the inverse of f(x) is:

[tex]f^{-1}[/tex](x) = -5/3(x - 6)

In slope-intercept form, this is:

[tex]f^{-1}[/tex](x) = -5/3x + 10

Learn more about the inverse function at

https://brainly.com/question/31180870

#SPJ4

The solution to the equation  5 + 3x -7x(x+8) = 9-x is -20

First, simplify

5 + 3x - 7x - 56 = 9-x

Simplifying further:

-4x - 51 = 9-x

-4x - 51 + x = 9

-3x - 51 = 9

-3x = 60

x  = 60/-3

x = -20

based on the above, we can state that the solution the equation is -20

Note that an equation is a mathematical statement that includes the sign 'equal to' between two expressions with equal values. For instance, 3x + 5 equals 15. There are several sorts of equations, such as linear, quadratic, cubic, and so on.

Learn more about equations:
https://brainly.com/question/29054118
#SPJ1

The zeros of the function include the following: A. 2 and -3.

In Mathematics and Geometry, the x-intercept simply refers to the zeros of any quadratic function and it can be defined as the point where the line of a graph passes through the x-axis (x-coordinate) as shown in the image attached above.

Next, we would write the quadratic function in standard form with a leading coefficient of 1 by using the zeros or x-intercept as follows;

f(x) = (x - (-3))(x - 2)

f(x) = (x + 3)(x - 2)

f(x) = x² + 3x - 2x - 6

f(x) = x² + x - 6

Read more on quadratic functions here: brainly.com/question/24020644

#SPJ1

Complete Question:

What are the zeros of the following function?

a) 2 and -3

b) 2 and 3

c) 3 only

d) -3,2 and 3

The exponent of the expression is 6.

Remember that a superscript is a small symbol on the right top of another, then we can write this as:

7⁶

Remember that a general power is:

aⁿ

Where a is the base and n is the exponent.

Comparing that with the given expression, we can see that the base is 7 and the exponent is 6.

So the first option is the correct one.

Learn more about exponents at.

https://brainly.com/question/847241

#SPJ1

A can be diagonalized if it has 2 unit eigenvectors All two eigenvalues are distinct and the eigenvectors that correspond to distinct eigenvalues are orthogonal Eigenvalues of A are the roots of a quadratic polynomial. The third eigenvalue is 5.

Given that two eigenvalues of a 3 x 3 matrix A are λ1 = 3, λ2 = 4, and det(A) = 60.

We know that the product of all eigenvalues of a matrix is equal to its determinant. So, we have:

λ1 * λ2 * λ3 = det(A)

Substituting the given values, we get:

3 * 4 * λ3 = 60

Simplifying, we get:

λ3 = 5

Therefore, the third eigenvalue is 5.

Statement (a) is false because having 2 unit eigenvectors does not guarantee that a matrix can be diagonalized.

Statement (b) is false because even if the eigenvalues are distinct, the eigenvectors may not be orthogonal.

Statement (c) is true because eigenvectors that correspond to distinct eigenvalues are always orthogonal.

Statement (d) is true because the eigenvalues of a 2 x 2 real matrix are the roots of a quadratic polynomial.

To learn more about eigenvalue visit: https://brainly.com/question/31650198

#SPJ11

Answer:

1

Step-by-step explanation:

This question is basically asking us to round 0.87 to the nearest integer, which is going to be a whole number in this case because 0.87 is positive. To do this, we're going to have to look at the digit in the tenths place; in this case, that digit is 8.

Is 8 closer to 10 or 0? Well, it's obviously closer to 10. So, we're going to round 0.87 up, bringing us to 1.

If that's confusing or you need more clarification, let me know. :)

Using the dot plot, it is found that a typical amount of chocolate chips in one of Shawn's cookies is around 4.56.

Dot plot:

The dot plot is a graph shows the number of times each measure appears in the data-set.

Researching this problem on the internet, the dot plot states that:

2 cookies have 2 chips.

2 cookies have 3 chips.

5 cookies have 4 chips.

4 cookies have 5 ships.

3 cookies have 6 ships.

2 cookies have 7 chips.

The mean is given by:

M = (2 x 2 + 2 x 3 + 5 x 4 + 4 x 5 + 3 x 6 + 2 x 7)/(2 + 2 + 5 + 4 + 3 + 2) = 4.56.

Hence, a typical amount of chocolate chips in one of Shawn's cookies is around 4.56.

Learn more about Dot plot visit: brainly.com/question/15853311

#SPJ4

Correct Question:

The following dot plot shows the number of chocolate chips in each cookie that Shawn has. Each dot represents a different cookie.

Answer:

432

Step-by-step explanation:

-12(-36) = 432

If a merchant bought an item for $50.00 and sold it for 30% more (markup), the item's selling price was $65.00.

The markup is the percentage or amount by which an item is sold.

The markup is based on the cost price.  After adding the markup amount, the selling price is determined to generate some profits for the seller.

The purchase price of an item = $50.00

The markup = 30%

Markup factor = 1.3 (1 + 0.3)

The selling price of the item = $65.00 ($50.00 x 1.3)

Thus, for adding 30% more (markup) on the cost of the item, the selling price is determined as $65.00.

Learn more about markups at https://brainly.com/question/1445853.

#SPJ1

Answer:

[tex]50( {.9}^{8} ) = 21.52[/tex]

The 8th bounce will be about 21.52 feet high.

Answer:

The volume of the cone is approximately 1051.2 cubic millimeters (mm^3).

Step-by-step explanation:

The formula for the volume of a cone is given as V = (1/3) * π * r^2 * h, where r is the radius of the circular base of the cone, h is the height of the cone, and π is the mathematical constant pi.

Substituting the given values, we get:

V = (1/3) * π * (6mm)^2 * 28mm

V = (1/3) * π * 216mm^3 * 28mm

V = (1/3) * π * 6048mm^3

V = (π/3) * 6048mm^3

Hence, the volume of the cone is (π/3) * 6048mm^3, which is the exact answer. If you need an approximate decimal answer, you can use a calculator and substitute the value of π as 3.14159 to get V ≈ 20,107.06mm^3 (rounded to two decimal places).

Answer:V≈1.06×10-6m³

r= Radius 6mm

h= Height 28mm

Unit Conversion:

r=6×10-3m

h=0.028m

Solution

V=πr2h

3=π·6×10-32·0.028

3≈1.05558×10-6m³

The probability of getting exactly 1 blue marble is 9/22 or approximately 0.409.

The probability of getting exactly 1 blue marble can be calculated in two steps:

Step 1: The probability of drawing a blue marble on the first draw is:

P(Blue on first draw) = 3/12

After drawing a blue marble, there will be 2 blue, 4 red, and 5 green marbles left in the bag.

The probability of drawing a non-blue marble on the second draw is:

P(Non-blue on second draw) = 9/11

Alternatively, if a non-blue marble is drawn first, there will be 3 blue, 4 red, and 4 green marbles left in the bag. The probability of then drawing a blue marble on the second draw is:

P(Blue on a second draw after non-blue on the first draw) = 3/11

So the probability of getting one blue and one non-blue marble on the first and second draws in any order is:

P(One blue and one non-blue) = P(Blue on first draw) × P(Non-blue on second draw) + P(Non-blue on first draw) × P(Blue on second draw after non-blue on first draw)

P(One blue and one non-blue) = (3/12) × (9/11) + (9/12) × (3/11) = 27/132

Step 2: There are two possible orders in which we can get exactly 1 blue marble is:

blue on the first draw and non-blue on the second draw, or non-blue on the first draw and blue on the second draw.

The probability of getting exactly 1 blue marble is:

P(Exactly 1 blue) = P(One blue and one non-blue) + P(One non-blue and one blue)

P(Exactly 1 blue) = 27/132 + 27/132 = 54/132

Simplifying, we get:

P(Exactly 1 blue) = 9/22

Therefore, the probability of getting exactly 1 blue marble is 9/22 or approximately 0.409.

To learn more about probability visit:

brainly.com/question/30648498

Answer:

I believe the answer is $180

Step-by-step explanation:

130+10=140

55+25=80

150

105

160

130

170

155

180

180