Find the surface area.


Type number only. No units. Do not round till the end. Round answer to the nearest tenth.

S.A. =

The hypotheses of the research is:

Null Hypothesis: H₀: p = 0.15

Alternative Hypothesis: Hₐ: p < 0.15

The conclusion is;

Angela  fails to reject the null hypothesis because the p-value is greater than the significance value.

Null and alternative hypotheses are basically methods used in statistical hypothesis testing. The null hypothesis of a test is one that always predicts no effect or no relationship existing between variables. Meanwhile, the alternative hypothesis states the research prediction of an effect or relationship.

We are told that the proportion of engineering students at the local college who did not own a calculator was 0.15.

Now, Angelina believes the proportion of current population of engineering students who do not own a calculator is lower.

Thus, the hypotheses is defined as:

Null Hypothesis: H₀: p = 0.15

Alternative Hypothesis: Hₐ: p < 0.15

Now, the p-value is greater than the significance value and as such we fail to reject the null hypothesis

Read more about null and alternative hypothesis at: https://brainly.com/question/25263462

#SPJ1

The surface area of the prisms found from the sum of the areas  of the the individual surfaces of the prism are;

23) 60 cm²

24) 124 ft²

25) 48 mi²

26) 132 yd²

27)50.2 mi²

28) 72 km²

29) 112 yd²

30) 154 mi²

31) 150 mi²

32) 288 km²

33) 156 in²

34) 96.2 in²

The surface area of a prism is the sum of the surface areas of the faces on the prism surface.

23) Surface area = 3.5 × 2 × (2 + 6)/2 + 2 × 4 × 2 + 2 × 6 + 2 × 2 = 60

The surface area = 60 cm²

24) Surface area = 3.5 × 2 × (2 + 6)/2 + 2 × 4 × 6 + 6 × 6 + 2 × 6 = 124

The surface area of the prism = 124 ft²

25) Surface area = 2 × (1/2) × 4 × 3 + 3 × 5 + 3 × 3 + 4 × 3 = 48

The surface area = 48 mi²

26) Surface area = 2 × (8 × 3 + 3 × 6 + 3 × 8) = 132

The surface area = 132 yd²

27) Surface area = 1.7 × 2 × (2 + 4)/2 + 4 × 4  + 3 × 2 × 4 = 50.2

The surface area = 50.2 mi²

28) Surface area = 2 × (6 × 3 + 3 × 2 + 2 × 6) = 72

The surface area = 72 km²

29) Surface area = 4 × 4 × 4 + 2 × 6 × 4 = 112

The surface area = 112 yd²

30) Surface area = 4 × 2 × 7 + 2 × 7 × 7 = 154

The surface area = 154 mi²

31) Surface area = 6 × 5 × 5 = 150

The surface area = 150 mi²

32) Surface area = 4 × 5 × 8 + 2 × 8 × 8 = 288

The surface area = 288 km²

33) Surface area = 2.8 × 2 × (6 + 4)/2 + 2 × 8 × 3  + 4 × 8 + 8 × 6 = 156

The surface area = 156 in²

34) Surface area = 2.6 × 2 × (2 + 5)/2 + 2 × 6 × 3  + 2 × 6 + 5 × 6 = 96.2

The surface area = 96.2 mi²

Learn more on the surface area of solids here: https://brainly.com/question/10167689

#SPJ1

Answer:

Step-by-step explanation:

a. 45mph

135miles ÷ 3hrs = 45mph

b. 44mph

22m x 2 = 44mph

c. 30mph

1/4 = 15 mins

7.5mins x 4 = 30mph

d. 50mph

100/3 miles = 2/3hr

xmiles (x = number of miles) = 1h

we use cross multiplying and use x to find the miles

2x  = 100 x 1

3        3

2x = 100

x = 50mph

e. 65mph

speed = 97.5 miles half an hour

The correct answer is c. marginal; average total; minimum. When plotting marginal and average cost curves, the marginal cost curve intersects the average total cost curve at its minimum point.

This is because the average total cost curve is U-shaped, with a downward-sloping portion at low levels of output and an upward-sloping portion at high levels of output. The marginal cost curve intersects the average total cost curve at the point where the upward-sloping portion of the average total cost curve starts, which is also the point where the average total cost curve is at its minimum. At this point, the marginal cost is equal to the average total cost.

Learn more about marginal cost at: brainly.com/question/7781429

#SPJ11

The total surface area of the cylinder 572 cm²is and it's volume is 924cm³

A cylinder is a three-dimensional shape consisting of two parallel circular bases, joined by a curved surface.

The total surface area of a cylinder is expressed as ;

SA = 2πr( r+h)

r is the radius and h is the height.

radius = 7cm

height = 6cm

SA = 2 × 3.14 × 7( 7+6)

= 44 × 13

= 572 cm²

The volume of a cylinder is expressed as

V = πr²h

= 3.14 × 7² × 6

= 154 × 6

= 924 cm²

Therefore the surface area and volume of the cylinder are 572cm² and 924cm²

learn more about cylinders from

https://brainly.com/question/9554871

#SPJ1

Answer:

(-6,9)

Step-by-step explanation:

We can use the midpoint formula to find the coordinates of C. The midpoint formula states that the midpoint of a line segment with endpoints (x1, y1) and (x2, y2) is:

((x1 + x2)/2, (y1 + y2)/2)

In this case, we know that the midpoint of CD is M(-1, 7) and one endpoint of CD is D(4, 5). Let C = (x, y) be the coordinates of the other endpoint of CD. Then we can use the midpoint formula to set up two equations:

(x + 4)/2 = -1

(y + 5)/2 = 7

Solving for x and y, we get:

x + 4 = -2

y + 5 = 14

x = -6

y = 9

Therefore, the coordinates of C are (-6, 9).

There is a weak relationship between education and income. Education not only raises the level of income is TRUE.

Education is the process of facilitating learning, or gaining of knowledge, skills and personal development.

Education effect on also your future. It makes bright future. if you are study in continuation it develops inner skills of human beings.

The income effect describes that the income effect evaluates consumer spending habits based on a change in their income. This is reflected in microeconomics via an upward shift in the downward-sloping demand curve.

Learn more about Education and Income at:

https://brainly.com/question/12313060

#SPJ4

The given question is incomplete, complete question is:

statistics show that there is a weak relationship between education and income. please select the best answer from the choices provided

1. True

2. False

65% is the probability that a randomly selected student is a senior or a student who drives to school.

First, let's calculate the probability of a student being a senior. We can do this by dividing the number of seniors by the total number of students:

Probability of being a senior = Number of seniors / Total number of students

Probability of being a senior = 25 / 100

Probability of being a senior = 0.25

Next, let's calculate the probability of a student driving to school. Again, we divide the number of students who drive by the total number of students:

Probability of driving to school = Number of students who drive / Total number of students

Probability of driving to school = (2 + 13 + 25) / 100

Probability of driving to school = 40 / 100

Probability of driving to school = 0.4

To find the probability of a student being a senior or driving to school (the union of these two events), we add their probabilities:

P(Senior U Drive to school) = P(Senior) + P(Drive to school)

P(Senior U Drive to school) = 0.25 + 0.4

P(Senior U Drive to school) = 0.65

Therefore, the probability that a randomly selected student is a senior or a student who drives to school is 0.65, or 65%.

Learn more about probability here:

https://brainly.com/question/30034780

#SPJ1

The number of cups of cat food the feeder can hold is 12 cups.

The total volume of the feeder is calculated as follows;

total volume = volume of cylinder + volume of cone

The volume of the cylindrical part of the feeder is calculated as;

V = πr²h

where;

V = π(2.5 in)²(7.5 in)

V = 147.3 in³

The  volume of the cone part of the feeder is calculated as;

V = ¹/₃ πr²h

V = ¹/₃ π(2.5 in)²( 4 in )

V = 26.2 in³

Total volume =  147.3 in³ + 26.2 in³

Total volume = 173.5 in³

The number of cups of cat food the feeder can hold is calculated as follows;

n =  (173.5 in³) / 14.4 in³

n = 12 cups

Learn  more about volume of cones here: https://brainly.com/question/13677400

#SPJ1

(a) To prove or disprove the statement "if f(x) is o(g(x)), then 2f(x) is o(2g(x))", we can use the definition of little-o notation.

Recall that f(x) is o(g(x)) if and only if, for any positive constant ε, there exists a positive constant M such that |f(x)| ≤ ε|g(x)| for all x > M.

Using this definition, let's consider the statement in question.

Suppose f(x) is o(g(x)), which means that |f(x)| ≤ ε|g(x)| for some positive constant ε and all x > M.

Now let's consider 2f(x). We can write this as 2f(x) = 2 * f(x), and since f(x) is o(g(x)), we know that |f(x)| ≤ ε|g(x)|. Therefore,

|2f(x)| = |2 * f(x)| ≤ 2 * |f(x)| ≤ 2ε|g(x)|

So we can see that |2f(x)| ≤ 2ε|g(x)|, which means that 2f(x) is also o(g(x)). Therefore, the statement is true.

(b) Now let's consider the statement "if f(x) is o(g(x)), then (f(x))2 is o(g(x))2". Again, we can use the definition of little-o notation.

Suppose f(x) is o(g(x)), which means that |f(x)| ≤ ε|g(x)| for some positive constant ε and all x > M.

Now let's consider (f(x))2. We can write this as (f(x))2 = f(x) * f(x), and since f(x) is o(g(x)), we know that |f(x)| ≤ ε|g(x)|. Therefore,

|(f(x))2| = |f(x) * f(x)| = |f(x)| * |f(x)| ≤ ε|g(x)| * ε|g(x)| = ε2|g(x)|2

So we can see that |(f(x))2| ≤ ε2|g(x)|2, which means that (f(x))2 is also o(g(x))2. Therefore, the statement is true.

In conclusion, we have proven both (a) and (b) to be true.

To know more about Provre visit :

https://brainly.com/question/27920991

#SPJ11

Answer:

Step-by-step explanation:

folding in thirds the value is 1/3 of 90, therefore 90 : 3 = 30°

Answer:

  ∠U = 65°

Step-by-step explanation:

You want the measure of external angle U formed by two tangents that intersect a circle creating major arc TV of 245°.

The measure of the external angle is half the difference of the two arcs of the circle that the secants (tangents) intercept.

The major arc is shown as 245°. The minor arc TV completes the circle, so is 360° -245°.

Half the difference is ...

  (245° -(360°-245°))/2 = 245° -180° = 65°

Angle U is 65°.

__

Additional comment

You will notice the angle formed by the tangents is 180° less than the measure of the major arc. (It is also equal to the supplement of the minor arc.)

A tangent is a special case of a secant, where the two points of intersection with the circle merge to a single point. The relations applicable to secants also apply to tangents.

(a) To find the rate of change of the area when r = 12 centimeters, we need to use the formula for the area of a circle, which is A = πr^2. We can then take the derivative of both sides with respect to time t, which gives us:
dA/dt = 2πr(dr/dt)

Substituting in the given values, we get:
dA/dt = 2π(12)(5) = 120π
Therefore, the rate of change of the area when r = 12 centimeters is 120π square centimeters per minute.
(b) To find the rate of change of the area when r = 32 centimeters, we can use the same formula and approach as in part (a), but with r = 32:
dA/dt = 2πr(dr/dt)
dA/dt = 2π(32)(5) = 320π
Therefore, the rate of change of the area when r = 32 centimeters is 320π square centimeters per minute.

Learn more about rate of change here:

https://brainly.com/question/29518179

#SPJ11

The greatest common factor of 66, 94, and 87 is 1.

To find the greatest common factor (GCF) of these three numbers, we need to find the common factors that they share. First, we can factor each number into its prime factors:

66 = 2 * 3 * 11

94 = 2 * 47

87 = 3 * 29

The only factor that all three numbers share is the number 1. Therefore, the GCF of 66, 94, and 87 is 1.

It's important to note that the GCF is the largest factor that two or more numbers have in common. In this case, the three numbers do not have any factors larger than 1 in common, so the GCF is 1.

To learn more about prime factors : brainly.com/question/29763746

#SPJ11

If the test statistic is -3.11, it means that the observed data is 3.11 standard deviations below the mean of the null distribution.

Since 2.36 is in the rejection region, it means that the critical value for the test is greater than 2.36 in absolute value. This implies that the null hypothesis would be rejected if the test statistic is either less than the negative critical value or greater than the positive critical value.

However, since the test statistic of -3.11 is smaller than the negative critical value, we would fail to reject the null hypothesis. This means that we would conclude that there is not enough evidence to support the alternative hypothesis and we accept the null hypothesis. Therefore, we would have made an incorrect decision if we rejected the null hypothesis based on the given information.

Visit here to learn more about null hypothesis:

brainly.com/question/28920252

#SPJ11

To solve the initial value problem, we first need to find the general solution of the given differential equation, which is a second-order linear differential equation with constant coefficients. The characteristic equation is r^2 - 8x^3 = 0, which has roots r = ±(2x)^(3/2). Therefore, the general solution of the differential equation is v(x) = c1(2x)^(3/2) + c2(-2x)^(3/2).

To find the values of the constants c1 and c2, we use the initial conditions v(8) = -48 and x0 = 2. Substituting x = 8 and v(x) = -48 into the general solution, we get -48 = c1(16)^(3/2) + c2(-16)^(3/2). Simplifying, we get c1 - c2 = -3.

To find c1 and c2, we differentiate the general solution with respect to x and substitute x = 2 and v'(2) = -8 into the resulting expression. We get v'(x) = 3x^(1/2)c1 - 3x^(1/2)c2, and substituting x = 2 and v'(2) = -8, we get -8 = 6c1 - 6c2. Simplifying, we get c1 + c2 = 4/3.

Solving the system of equations c1 - c2 = -3 and c1 + c2 = 4/3, we get c1 = 5/6 and c2 = -17/6. Therefore, the solution of the initial value problem is v(x) = (5/6)(2x)^(3/2) - (17/6)(-2x)^(3/2).

To learn more about system of equations : brainly.com/question/20067450

#SPJ11

Since the p-value (0.1021) is greater than the significance level (0.05), we fail to reject the null hypothesis.

The null hypothesis is a type of hypothesis that describes the population parameter and is used to examine the validity of experimental results.

To test whether the manufacturer's defective rate is less than 5%, we can use a one-tailed hypothesis test with a significance level of 0.05.

Let p be the true proportion of defective batteries in the population. The null hypothesis is that p >= 0.05, and the alternative hypothesis is that p < 0.05.

We can use the normal approximation to the binomial distribution, since n = 100 and p₀ = 0.05 > 10. The test statistic is:

z = (x - np₀) / √(np₀(1-p₀))

where x is the number of defective batteries in the sample, n is the sample size, and p₀ is the hypothesized proportion under the null hypothesis.

Plugging in the values, we get:

z = (4 - 100*0.05) / √(100*0.05*0.95) = -1.2649

The p-value for this test is the probability of getting a test statistic as extreme as -1.2649 or less, assuming the null hypothesis is true. From a standard normal distribution table, the probability of getting a z-score of -1.2649 or less is 0.1021.

Since the p-value (0.1021) is greater than the significance level (0.05), we fail to reject the null hypothesis. Therefore, there is not enough evidence to conclude that the manufacturer is not meeting their quality control standards.

Learn more about null hypothesis on:

https://brainly.com/question/30759198

#SPJ4

The value of MD (mean difference) for the given repeated-measures research study data can be calculated by subtracting the scores of the first condition from the scores of the second condition for each subject, then calculating the mean of those differences.

The mean difference (MD) for the given data can be calculated as follows:

MD = ((15-10) + (8-4) + (5-7) + (11-6))/4

MD = (5 + 4 - 2 + 5)/4

MD = 3

Therefore, the value of MD for the given data is 3.

In a repeated-measures research study, the same group of subjects is measured on the same variable multiple times. MD represents the average difference between the scores of the same group of subjects on the same variable across two different conditions or time points.

To calculate MD, we need to subtract the scores of the first condition from the scores of the second condition for each subject, and then calculate the mean of those differences. In this case, the mean difference is 3, indicating that there is an average increase of 3 units from the first to the second condition. MD is a useful statistic in repeated-measures studies, as it provides information about the magnitude and direction of the change in the variable being measured.

Learn more about Mean Difference:

brainly.com/question/12694093

#SPJ11

The block of metal with a 4 cubic cm volume and density of 19.58 g/cm³ has a mass of 78.32 g.

Density refers to a dimension that is it is the mass per unit volume. The density of an object is not affected by the volume or the mass of the object.

It is a unitless quantity. Density is affected by the nature of the substance as well as the temperature. It is expressed as below:

ρ = m/v

where ρ is the density

m is the mass

v is the volume

Given:

ρ = 19.58 g/cm³

v = 4 cm³

19.85 = m / 4

m = 19.58 * 4

= 78.32 g

Learn more about Density:

https://brainly.com/question/26364788

#SPJ1

Answer:

47/100

Step-by-step explanation:

2/10*10/10= 20/100

67/100-20/100= 47/100.

The graph of the solution set for the system of inequalities is on the image at the end.

Here we have a system of inequalities, it can be written as:

y - 5 ≥ -(x + 1)

y ≥ 3x - 2

To graph this, we can write both inequalities in linear form:

y  ≥ -(x + 1) + 5

y ≥ 3x - 2

We can see that in both cases we have the symbol "≥", so we need to graph both of these lines with solid lines, and then shade the region above of these lines, then the graph of the system is the one you can see at the end.

The region where the two shades intercept (dark blue one) is the set of solutions.

Learn more about system of inequalities at:

https://brainly.com/question/9774970

#SPJ1

Answer: 24

Step-by-step explanation:

6 sides on the dice. 4 sections on the spinner.

6 times 4 = 24

24 possible outcomes.

The 7th term of the sequence is 729. To find the 7th term, we notice that the sequence is formed by multiplying each term by 3. Therefore, the 4th term is 327=81, the 5th term is 381=243, the 6th term is 3243=729, and the 7th term is 3729=2187.

In this problem, we are given the first three terms of a sequence and asked to find the 7th term. A sequence is a list of numbers in a specific order, where each number is called a term. To find the next term in a sequence, we need to identify the pattern or rule that generates the sequence.

In this case, we notice that each term is obtained by multiplying the previous term by 3. That is, if a_1=3, a_2=9, a_3=27, then a_4=3a_3=81, a_5=3a_4=243, a_6=3a_5=729, and a_7=3a_6=2187.

Therefore, the 7th term is 2187. It is important to round to the nearest thousandth only when we are dealing with decimal numbers. Since the terms of this sequence are integers, we do not need to round.

Learn more about sequence here: brainly.com/question/30262438

#SPJ11

The process described above satisfies the Markov property because the future state of the system only depends on the current state, and not on any previous states. The transition probability matrix is P =[tex]\left[\begin{array}{cccc}0&1&0&0\\1/2&0&1/2&0\\0&1/2&0&1/2\\0&0&1&0\end{array}\right][/tex]  

In other words, given the current state, the probability distribution of the next state depends only on the current state and not on any previous history.

Let Xn denote the state of the system after the nth step, where Xn = i means that the first urn contains i white balls and 3-i black balls. Since each step involves drawing one ball from each urn and switching them, the number of white balls in the first urn can only change by one after each step. Thus, the only possible transitions are:

If Xn = 0, then the next state Xn+1 can only be 1, with probability 1, since there is only one white ball in the first urn.

If Xn = 1, then the next state Xn+1 can be either 0 or 2, each with probability 1/2, since there are two white balls in the first urn and each ball is equally likely to be drawn.

If Xn = 2, then the next state Xn+1 can be either 1 or 3, each with probability 1/2, since there are two black balls in the first urn and each ball is equally likely to be drawn.

If Xn = 3, then the next state Xn+1 can only be 2, with probability 1, since there is only one black ball in the first urn.

Therefore, the transition probability matrix is:

P =[tex]\left[\begin{array}{cccc}0&1&0&0\\1/2&0&1/2&0\\0&1/2&0&1/2\\0&0&1&0\end{array}\right][/tex]  

where Pij is the probability of transitioning from state i to state j. For example, P12 = 1/2 means that the probability of transitioning from state 1 (one white ball in the first urn) to state 2 (two white balls in the first urn) is 1/2.

Correct Question :

Three white balls and three black balls are distributed in two urns in such a way that each contain three balls. We say that the system is in state i, i=0,1,2,3, if the first urn contains i white balls. At each step, we draw one ball from each urn and place the ball drawn from the first urn into the second, and conversely with the ball from the second urn. Let Xn denote the state of the system after the nth step. Explain why Xn = 0, 1, 2, ......... is a Markov chain and calculate its transition probability matrix.

To learn more about Markov property here:

https://brainly.com/question/17294731

#SPJ4

One pair of polar coordinates with r < 0 would be (-4, 7/4 + π), which corresponds to the same point but on the opposite side of the origin.

The given polar coordinate is (4, 7/4). To find two other pairs of polar coordinates, we can use the fact that the point lies on the terminal ray of multiple angles that differ by integer multiples of 2π.

Specifically, we can add or subtract 2π from the given angle to get two other angles that correspond to points with the same distance from the origin.

So, one pair of polar coordinates with r > 0 would be (4, 7/4 + 2π), which corresponds to the same point on the terminal ray but with a larger angle.

One pair of polar coordinates with r < 0 would be (-4, 7/4 + π), which corresponds to the same point but on the opposite side of the origin.

To plot the point (4, 7/4), we first move out 4 units from the origin in the direction of the angle 7/4 (measured counterclockwise from the positive x-axis).

This gives us a point on the terminal ray of the angle with distance 4 from the origin. We then label this point with the given polar coordinates.

To plot the other two points, we repeat the process with the angles we found above, using a dashed line to differentiate them from the original point.

To know more about coordinates click here

brainly.com/question/29189189

#SPJ1

Answer:

  (a)  (-1, 2)

Step-by-step explanation:

You want the ordered pair that represents the coordinates of a point 1 unit left and 2 units up from the origin.

The (x, y) coordinates of a point on the Cartesian plane represent (units right, units up) relative to the origin. When the direction is left or down, the sign of the corresponding coordinate is made negative.

  (1 left, 2 up)   ⇒   (-1, 2), matching choice A

<95141404393>

To evaluate this line integral, we will use Green's theorem, which states that for a closed curve C, oriented counterclockwise, and a region R bounded by C, the line integral of the vector field F along C is equal to the double integral of the curl of F over R:

∮c F ⋅ dr = ∬R (curl F) ⋅ dA
In this case, our vector field F is:
F = (5y - e×sin(x)) i + (8x - sin(y³)) j
And the curl of F is:
curl F = ∂(8x - sin(y³))/∂x - ∂(5y - e*sin(x))/∂y = 5e×cos(x) + 3y²×cos(y³)
Now, we need to find the region R bounded by C, which is the circle of radius 5 centered at (3,-5). This is simply the disk with center (3,-5) and radius 5.
Using polar coordinates, we can write the double integral as:
∬R (curl F) ⋅ dA = ∫θ=0..2π ∫r=0..5 (5e×cos(θ) + 3r²×cos(r³×sin(θ)³)) r dr dθ
Evaluating this integral, we get:
∬R (curl F) ⋅ dA = π×(625e + 375)
Therefore, by Green's theorem:
∮c F ⋅ dr = π×(625e + 375)
Substituting F and evaluating the integral, we get:
∮c (5y - e×sin(x)) dx + (8x - sin(y³)) dy = π×(625e + 375)
This is the value of the line integral.

Learn more about vector here:

https://brainly.com/question/14480157

#SPJ11

The critical points of the function f(x, y) = x^2 - 2xy^2 - 4y^5 can be found by setting the partial derivatives with respect to x and y equal to zero and solving for x and y. Taking the partial derivative with respect to x, we get 2x - 2y^2 = 0. Taking the partial derivative with respect to y, we get -4xy - 20y^4 = 0. Solving these equations simultaneously, we get two critical points: (0, 0) and (2, -1/2).

To classify the critical points, we need to use the second partial derivative test. Taking the second partial derivative with respect to x, we get 2. Taking the second partial derivative with respect to y, we get -8xy - 100y^3. At (0, 0), the second partial derivative with respect to y is zero, so we cannot use the second partial derivative test. At (2, -1/2), the second partial derivative with respect to y is negative, so the critical point is a local maximum. Therefore, the critical points of f(x, y) = x^2 - 2xy^2 - 4y^5 are (0, 0) and (2, -1/2), with the critical point (2, -1/2) being a local maximum.

To learn more about second partial derivative : brainly.com/question/31386850

#SPJ11

Answer:x=-10

Step-by-step explanation:

i used a app i could be wrong :/

You would pay approximately $1630.19 in interest for the amount you are able to borrow.

To calculate the amount you are able to borrow, we can use the formula for the present value of an annuity:

P = PMT ((1 - (1 + r)⁻ⁿ) / r)

Where:

P is the principal amount (the amount you are able to borrow)

PMT is the monthly payment you can afford ($300)

r is the monthly interest rate (3.8% divided by 100, then divided by 12)

n is the number of months (5 years multiplied by 12)

Let's calculate the amount you are able to borrow:

r = 3.8% / 100 / 12 = 0.0031667 (rounded to 7 decimal places)

n = 5 years x 12 = 60 months

P = $300 x ((1 - (1 + 0.0031667)⁻⁶⁰) / 0.0031667)

P ≈ $16369.81

Therefore, you are able to borrow approximately $16369.81.

To calculate the interest you would pay for the amount you are able to borrow, we can subtract the principal amount from the total amount paid over the 5-year period. The total amount paid can be calculated as:

Total Amount Paid = Monthly Payment x Number of Months

Total Amount Paid = $300 x 60 = $18,000

Interest Paid = Total Amount Paid - Principal Amount

Interest Paid = $18,000 - $16369.81 ≈ $1630.19

Therefore, you would pay approximately $1630.19 in interest for the amount you are able to borrow.

To learn more about loan calculations;

https://brainly.com/question/28244942

#SPJ1