Answer:
Hello the options to your question is missing below are the options
2 x 10^8 ft-lb
15527950 ft-lb
2.8 x 10^7 ft-lb
13.55 x 10^7 ft-lb
Answer : 13.55 * 10^7 ft-Ib
Explanation:
Given data :
weight of Aircraft (p) = 20000 Ibs
height ( h ) = 5000 ft
Velocity = 200 KTS = 370 km/h ( 10277 m/s) where 1 KTS = 1185 km/h
calculate the total energy
Total energy = potential energy + kinetic energy
potential energy = mgh = p * h =20000 * 5000 = 100 * 10^6 ft-Ibs
kinetic energy = 1/2 mv^2 = 1/2 * 625 * (33709)^2 = 3551 *10^6 ft-Ibs
where ; m = p/g = 20000 / 32 = 625 Ibs
v = 10277 m/s ≈ 33709 ft/s
hence total energy = 100 * 10^6 + 3551 * 10^6 = 1355*10^7 ft-Ibs
Write a numerical expression for the emissive intensity (in W/m^2.sr) coming out of a tiny hole in an enclosure of surface temperature 1000K and emissivity 0.6:
Answer:
6.0 × [tex]10^{11}[/tex] W/[tex]m^{2}[/tex]
Explanation:
From Wien's displacement formula;
Q = e A[tex]T^{4}[/tex]
Where: Q is the quantity of heat transferred, e is the emissivity of the surface, A is the area, and T is the temperature.
The emissive intensity = [tex]\frac{Q}{A}[/tex] = e[tex]T^{4}[/tex]
Given from the question that: e = 0.6 and T = 1000K, thus;
emissive intensity = 0.6 × [tex](1000)^{4}[/tex]
= 0.6 × 1.0 × [tex]10^{12}[/tex]
= 6.0 × [tex]10^{11}[/tex] [tex]\frac{W}{m^{2} }[/tex]
Therefore, the emissive intensity coming out of the surface is 6.0 × [tex]10^{11}[/tex] W/[tex]m^{2}[/tex].
Kevin is a black high school senior. While walking home from a sporting event at school, he sees a police car and decides to take another street to avoid it. He worries that the police will stop and question him even though he has not done anything wrong. Which theory explains this thought process? Dramaturgy Social construction of reality Social exchange theory Ethnomethodology
Answer:
Ethnomethodology theory
Explanation:
Take note of the fact that we are told Kevin worries that the police will stop and question him even though he has not done anything wrong.
This statement shows us that Kevin already understood his society from past experiences, and thus he tries to avoid social interactions with particular member of his society (the police) who may be show discrimination towards him.
Unpolarized light is incident upon two ideal polarizing filters that do not have their transmission axes aligned. If of the light passes through this combination, what is the angle between the transmission axes of the two filters
Answer:
The angle between the transmission axes of the filters is 65°
Explanation:
The complete question is
Unpolarized light is incident upon two ideal polarizing filters that do not have their transmission axes aligned. If 18% of the light passes through this combination, what is the angle between the transmission axes of the two filters.
From Malus law,
[tex]I = I_{0} cos^{2} \beta[/tex] ....1
where [tex]I[/tex] is the intensity of the polarized light,
[tex]I_{o}[/tex] is the intensity of the incident light
β the angle between the transmission axes of the two filters
Since the intensity is reduced to 18% or 0.18 of its initial value, this means that
[tex]cos^{2} \beta[/tex] = 0.18
substituting into the equation above, we have
[tex]I = 0.18I_{0}[/tex] ....2
equating the two equations, we have
[tex]I_{0}cos^{2} \beta[/tex] = [tex]0.18I_{0}[/tex]
[tex]cos^{2}\beta[/tex] = [tex]\frac{0.81I_{0} }{I_{0} }[/tex] = 0.18
[tex]cos \beta[/tex] = [tex]\sqrt{0.18}[/tex] = 0.424
[tex]\beta[/tex] = [tex]cos^{-1} 0.424[/tex] = 64.9 ≅ 65°
Your friend just challenged you to a race. You know in order to beat him, you must run 15 meters within 20 seconds in a northern direction. What does your average velocity need to be to win the race? .5 meters per second, north .75 meters per second, north 1.3 meters per second, north 300 meters per second, north
At a certain instant the current flowing through a 5.0-H inductor is 3.0 A. If the energy in the inductor at this instant is increasing at a rate of 3.0 J/s, how fast is the current changing
Answer:
The current is changing at the rate of 0.20 A/s
Explanation:
Given;
inductance of the inductor, L = 5.0-H
current in the inductor, I = 3.0 A
Energy stored in the inductor at the given instant, E = 3.0 J/s
The energy stored in inductor is given as;
E = ¹/₂LI²
E = ¹/₂(5)(3)²
E = 22.5 J/s
This energy is increased by 3.0 J/s
E = 22.5 J/s + 3.0 J/s = 25.5 J/s
Determine the new current at this given energy;
25.5 = ¹/₂LI²
25.5 = ¹/₂(5)(I²)
25.5 = 2.5I²
I² = 25.5 / 2.5
I² = 10.2
I = √10.2
I = 3.194 A/s
The rate at which the current is changing is the difference between the final current and the initial current in the inductor.
= 3.194 A/s - 3.0 A/s
= 0.194 A/s
≅0.20 A/s
Therefore, the current is changing at the rate of 0.20 A/s.
The rate at which the current is changing is;
di/dt = 0.2 A/s
We are given;
Inductance; L = 5 H
Current; I = 3 A
Rate of Increase of energy; dE/dt = 3 J/s
Now, the formula for energy stored in inductor is given as;
E = ¹/₂LI²
Since we are looking for rate at which current is changing, then we differentiate both sides of the energy equation to get;
dE/dt = LI (di/dt)
Plugging in the relevant values gives;
3 = (5 × 3)(di/dt)
di/dt = 3/(5 × 3)
di/dt = 0.2 A/s
Read more at; https://brainly.com/question/13112120
You are in the frozen food section of the grocery store and you notice that your hand gets cold when you place it on the glass windows of the display cases. Your friend says this is because coolness is transferred from the display case to your hand. What do you think?
Answer:
I think my friend got it all wrong, as coolness can not be transferred but heat was actually transferred between my hand and the glass windows
Explanation:
In thermodynamics, coolness can not be transferred, only heat can be transferred
Here is how the mechanism of why i felt cold works, my body gave out heat, hence there was heat transfer from a region of high to a low heat region, equilibrium was reached and I started feeling the coolness in my hands.
if the current in the circuit decreases, what does that mean about the rate at which the charge(and voltage) change in a capacitor?
2. the exponent of the exponential function contains RC for the given circuit. who's is a constant. use units R and C to find units of RC. write ohms in terms of volts and amps and write farads in terms of volts and coulombs. Simplify
units of RC are__________
Answer:
`1. charge Q, on the capacitor increases, while the current will decrease
2. τ = t = secs
Explanation:
1. consider RC of a circuit to be am external source
voltage across the circuit is given as
v =v₀(1 - [tex]e^{\frac{t}{τ} }[/tex])
where v = voltage
v₀ = peak voltage
t = time taken
τ= time constant
as the charge across the capacitor increases, current decreases
the charge across the circuit is given as
Q= Q₀(1 - [tex]e^{\frac{t}{τ} }[/tex])
charge Q is inversely proportional to the current I
hence the charge across the circuit increases
2. τ = RC
unit of time constant, τ,
= Ω × F
=[tex]\frac{V}{I}[/tex] ˣ [tex]\frac{C}{V}[/tex]
=[tex]\frac{C}{A}[/tex]
=[tex]\frac{C}{C/t}[/tex]
τ = t = secs
You throw a stone vertically upward with a speed of 26.0 m/s. (a) How fast is it moving when it reaches a height of 15.0 m? (b) How much time is required to reach this height when it's falling down? a. 19.5 m/s , b. 4.51 s a. 17.9 m/s , b. 0.620 s a. 19.5 m/s , b. 0.800 s a. 17.9 m/s , b. 4.28 s a. 380 m/s , b. 8 s
Answer:
ok well
Explanation:
teghe
Answer:
v = 19.5 m/s
t = 4.51 s
Explanation:
a)
given:
height is 15m from the ground
initial velocity Vi = 26 m/s
acceleration a or g = 9.81 m/s²
formula: Vf² = Vi² + 2aΔy
26² = Vi² + 2 (9.81) 15
Vi = 19.5 m/s
now you can calculate the time by using the equations below:
Δy = 1/2 (Vi + Vf) t
Vf = Vi + a t
Δy = Vi t + 1/2 a t
time must be 4.51 s
g If this combination of resistors were to be replaced by a single resistor with an equivalent resistance, what should that resistance be
In this circuit the resistance R1 is 3Ω, R2 is 7Ω, and R3 is 7Ω. If this combination of resistors were to be replaced by a single resistor with an equivalent resistance, what should that resistance be?
Answer:
9.1Ω
Explanation:
The circuit diagram has been attached to this response.
(i) From the diagram, resistors R1 and R2 are connected in parallel to each other. The reciprocal of their equivalent resistance, say Rₓ, is the sum of the reciprocals of the resistances of each of them. i.e
[tex]\frac{1}{R_X} = \frac{1}{R_1} + \frac{1}{R_2}[/tex]
=> [tex]R_{X} = \frac{R_1 * R_2}{R_1 + R_2}[/tex] ------------(i)
From the question;
R1 = 3Ω,
R2 = 7Ω
Substitute these values into equation (i) as follows;
[tex]R_{X} = \frac{3 * 7}{3 + 7}[/tex]
[tex]R_{X} = \frac{21}{10}[/tex]
[tex]R_{X} = 2.1[/tex]Ω
(ii) Now, since we have found the equivalent resistance (Rₓ) of R1 and R2, this resistance (Rₓ) is in series with the third resistor. i.e Rₓ and R3 are connected in series. This is shown in the second image attached to this response.
Because these resistors are connected in series, they can be replaced by a single resistor with an equivalent resistance R. Where R is the sum of the resistances of the two resistors: Rₓ and R3. i.e
R = Rₓ + R3
Rₓ = 2.1Ω
R3 = 7Ω
=> R = 2.1Ω + 7Ω = 9.1Ω
Therefore, the combination of the resistors R1, R2 and R3 can be replaced with a single resistor with an equivalent resistance of 9.1Ω
How do you stay hydrated during warm-up and scheduled activity?
Answer:
In order to stay hydrated during warm-up(s) drink 8oz of water 20-30 mintues before you start exercising or during your warm-up(s), make sure you drink 7 to 10 oz of water every 10 to 20 minutes during exercise, and drink 8oz of water no more than 30 minutes after you exercise.
In order to stay hydrated during scheduled activity(s) drink 17 to 20 oz of water 2 to 3 hours before you start to exercise, like said before drink 8 oz of water 20 to 30 minutes before you start exercising or during your warm-up(s), drink 7 to 10 oz of water every 10 to 20 minutes during exercise, also said before drink 8 ounces of water no more than 30 minutes after you exercise.
Answer: My scheduled activity was one hour of softball practice. I play catcher, so my thighs and knees take a lot of abuse from kneeling and standing. The lunges were excellent at preparing my thighs for softball. The high knees exercise and arm pumping didn’t feed into softball too well. I suppose that they might help me with base running.
Explanation: EDMENTUM
Asteroid A has 3.5 times the mass and 2.0 times the velocity of Asteroid B. If
Asteroid B has a kinetic energy of 2,300,000 J then what is the kinetic energy of
Asteroid A?
Answer:
K_A = 32.2 10⁶ J
Explanation:
In this exercise we must relate the quantities given to find the kinetic energy
Asteroid A data
m_A = 3.5 m_B
v_A = 2.0 v
they also give the value of the kinetic energy of asteroid A
K_B = 2.3 10⁶ J
the expression for scientific energy is
K = ½ m v²
let's replace
K_A = ½ m_a V_a2
K_A = ½ 3.5 m_B (2.0 v_B)^2
K_A = 3.5 2² (½ m_B v_B²)
K_A = 14 K_B
K_A = 32.2 10⁶ J
Now, let's see what happens when the cannon is high above the ground. Click on the cannon, and drag it upward as far as it goes (15 m above the ground). Set the initial velocity to 14 m/s, and fire several pumpkins while varying the angle. For what angle is the range the greatest?
choices:
A. 45∘
B. 20∘
C. 30∘
D. 40∘
E. 50∘
Answer:
B. 20°Explanation:
Range in projectile is defined as the distance covered in the horizontal direction. It is expressed as R = U²sin2Ф/g
U is the initial velocity of the body (in m/s)
Ф is the angle of projection
g is the acceleration due to gravity.
Given U = 14m/s, g = 9.8m/s and range R = 15 m
we will substitute this value into the formula to get the projection angle Ф as shown;
15 = 15²sin2Ф/9.8
15*9.8 = 15²sin2Ф
147 = 225sin2Ф
sin2Ф = 147/225
sin2Ф = 0.6533
2Ф = sin⁻¹0.6533
2Ф = 40.79°
Ф = 40.79°/2
Ф = 20.39° ≈ 20°
Hence, the range is greatest at angle 20°
When you replace helium in a balloon with less-dense hydrogen, does the buoyant force on the balloon change if the balloon remains the same size?
Answer:
No change
Explanation:
First, we hare to understand what we mean by buoyant force.
Archimedes Principle states that
"the buoyant force on a submerged object is equal to the weight of the fluid that is displaced by the object."
Hot air balloons rise into the air as a result of the density of the air inside the balloon is less dense i.e warmer air than the air outside the balloon i.e cooler air. This is basically how the balloons work. Now applying this to our question
Replacing Helium with less dense Hydrogen will make no difference to the buoyant force because the volume of the balloon did not change. The buoyant force depends on the weight of the displaced air, and not on the force causing the displacement.
In a wire with a 1.05 mm2 cross-sectional area, 7.93×1020 electrons flow past any point during 3.97 s. What is the current ???? in the wire?
Answer:
The current in the wire is 31.96 A.
Explanation:
The current in the wire can be calculated as follows:
[tex] I = \frac{q}{t} [/tex]
Where:
q: is the electric charge transferred through the surface
t: is the time
The charge, q, is:
[tex] q = n*e [/tex]
Where:
n: is the number of electrons = 7.93x10²⁰
e: is the electron's charge = 1.6x10⁻¹⁹ C
[tex] q = n*e = 7.93 \cdot 10^{20}*1.6 \cdot 10^{-19} C = 126.88 C [/tex]
Hence, the current in the wire is:
[tex] I = \frac{126.88 C}{3.97 s} = 31.96 A [/tex]
Therefore, the current in the wire is 31.96 A.
I hope it helps you!
Two unknown resistors are connected together. When they are connected in series their equivalent resistance is 15 Ω. When they are connected in parallel, their equivalent resistance is 3.3 Ω. What are the resistances of these resistors?
Explanation:
Let x and y are two unknown resistors. When they are connected in series their equivalent resistance is 15 Ω. When they are connected in parallel, their equivalent resistance is 3.3 Ω.
For series combination,
[tex]x+y=15[/tex] ......(1)
For parallel combination,
[tex]\dfrac{1}{x}+\dfrac{1}{y}=3.3[/tex] ....(2)
We need to find the resistances of these resistors. Solving equation (1) and (2) we get :
x = 0.29 and y = 14.7
Hence, the resistances of these resistors are 0.29 ohms and 14.7 ohms.
You are using a hydrogen discharge tube and high quality red and blue light filters as the light source for a Michelson interferometer. The hydrogen discharge tube provides light of several different wavelengths (colors) in the visible range. The red light in the hydrogen spectrum has a wavelength of 656.3 nm and the blue light has a wavelength of 434.0 nm. When using the discharge tube and the red filter as the light source, you view a bright red spot in the viewing area of the interferometer. You now move the movable mirror away from the beam splitter and observe 158 bright spots. You replace the red filter with the blue filter and observe a bright blue spot in the interferometer. You now move the movable mirror towards the beam splitter and observe 114 bright spots. Determine the final displacement (include sign) of the moveable mirror. (Assume the positive direction is away from the beam splitter.)
Answer:
final displacement = +24484.5 nm
Explanation:
The path difference when 158 bright spots were observed with red light (λ1 = 656.3 nm) is given as;
Δr = 2d2 - 2d1 = 150λ1
So, 2d2 - 2d1 = 150λ1
Dividing both sides by 2 to get;
d2 - d1 = 75λ1 - - - - eq1
Where;
d1 = distance between the fixed mirror and the beam splitter
d2 = position of moveable mirror from splitter when 158 bright spots are observed
Now, the path difference between the two waves when 114 bright spots were observed is;
Δr = 2d'2 - 2d1 = 114λ1
2d'2 - 2d1 = 114λ1
Divide both sides by 2 to get;
d'2 - d1 = 57λ1
Where;
d'2 is the new position of the movable mirror from the splitter
Now, the displacement of the moveable mirror is (d2 - d'2). To get this, we will subtract eq2 from eq1.
(d2 - d1) - (d'2 - d1) = 75λ1 - 57λ2
d2 - d1 - d'2 + d1 = 75λ1 - 57λ2
d2 - d'2 = 75λ1 - 57λ2
We are given;
(λ1 = 656.3 nm) and λ2 = 434.0 nm.
Thus;
d2 - d'2 = 75(656.3) - 57(434)
d2 - d'2 = +24484.5 nm
A 0.12-kg metal rod carrying a current of current 4.1 A glides on two horizontal rails separation 6.3 m apart. If the coefficient of kinetic friction between the rod and rails is 0.18 and the kinetic friction force is 0.212 N , what vertical magnetic field is required to keep the rod moving at a constant speed of 5.1 m/s
Answer:
The magnetic field is [tex]B = 8.20 *10^{-3} \ T[/tex]
Explanation:
From the question we are told that
The mass of the metal rod is [tex]m = 0.12 \ kg[/tex]
The current on the rod is [tex]I = 4.1 \ A[/tex]
The distance of separation(equivalent to length of the rod ) is [tex]L = 6.3 \ m[/tex]
The coefficient of kinetic friction is [tex]\mu_k = 0.18[/tex]
The kinetic frictional force is [tex]F_k = 0.212 \ N[/tex]
The constant speed is [tex]v = 5.1 \ m/s[/tex]
Generally the magnetic force on the rod is mathematically represented as
[tex]F = B * I * L[/tex]
For the rod to move with a constant velocity the magnetic force must be equal to the kinetic frictional force so
[tex]F_ k = B* I * L[/tex]
=> [tex]B = \frac{F_k}{L * I }[/tex]
=> [tex]B = \frac{0.212}{ 6.3 * 4.1 }[/tex]
=> [tex]B = 8.20 *10^{-3} \ T[/tex]
Rays that pass through a lens very close to the principle axis are more sharply focused than those that are very far from the axis. This spherical aberration helps us understand why:_______
Answer: it is easier to read in bright light than dim light.
Explanation:
The ray of light is the direction that is used by light in travelling through a medium. Rays that pass through a lens very close to the principle axis are more sharply focused than those that are very far from the axis.
Because of the fact that the rays are close to the principle axis, the spherical aberration helps us to understand the reason why it is easier for people to read in bright light than readin iin dim light.
1. Water flows through a hole in the bottom of a large, open tank with a speed of 8 m/s. Determine the depth of water in the tank. Viscous effects are negligible.
Answer:
3.26m
Explanation:
See attached file
A positively charged particle has a velocity in the negative z direction at point P. The magnetic force on the particle at this point is in the negative y direction. Which one of the following statements about the magnetic field at point P can be determined from this data?
A. Bx is positive.
B. Bz is positive.
C. By is negative.
D. By is positive.
E. Bx is negative.
Answer:
When reviewing the correct answer is A
Explanation:
The magnetic force is given by the expression
F = qv xB
where the bold letters indicate vectors, from this expression the module can be calculated
F = = q v b sin θ
the direction of the force is given by the rule of the right hand, for a positive charge the speed held by the thumb, the extended fingers point in the direction of the magnetic field and the palm points the direction of the force
in this case
the speed is in the negative part of the z axis
the force is in the negative direction of the axis and
consequently the magnetizing field is in the positive direction of the x axis
When reviewing the correct answer is A
In your words, describe how momentum is related to energy.
Answer:
you need momentum in order to release energy. For example, if you need to push something heavy and you get a running head start, then it will be easier.
Explanation:
Recent technological developments like high-resolution satellite imagery and diagnostic positron emission tomography (PET scans) have refined and extended the camera’s capacity to provide information. Which passage assertion does this information support most strongly?
Answer:
D) Photography can be used to both control and benefit society.
Explanation:
High-resolution satellite imagery and diagnostic positron emission tomography (PET scans) have been used to both control and benefits the society in the sense that it has helped to take records of information of crime, traffic offenders such drunk drivers and over speeding drivers, e.t.c. it helps control by given their information and automatically penalizing them or ensuring the agency penalized them and also benefit the society by preventing people from committing crime thereby, protecting them from offenders.
A generator rotates at 95 Hz in a magnetic field of 0.025 T. It has 550 turns and produces an rms voltage of 170 V and an rms current of 60.0 A.
Required:
a. What is the peak current produced?
b. What is the area of each turn of the coil?
Answer:
Peak current= 84.86 A
Area of each turn = 0.029 m^2
Explanation:
The peak value of current can be obtained from Irms= 0.707Io. Where Io is the peak current.
Hence;
Irms= 60.0A
Io= Irms/0.707
Io = 60.0/0.707
Io= 84.86 A
Vrms= 0.707Vo
Vo= Vrms/0.707= 170/0.707 = 240.45 V
From;
V0 = NABω
Where;
Vo= peak voltage
N= number of turns
B= magnetic field
A= area of each coil
ω= angular velocity
But ω= 2πf = 2×π×95= 596.9 rads-1
Substituting values;
A= Vo/NBω
A= 240.45/550×0.025×596.9
A= 0.029 m^2
An ideal air-filled parallel-plate capacitor has round plates and carries a fixed amount of equal butopposite charge on its plates. All the geometric parameters of the capacitor (plate diameter andplate separation) are now DOUBLED. If the original energy stored in the capacitor was U0, howmuch energy does it now store?
Answer:
U_f = (U_o)/2)
Explanation:
The capacitance of a given capacitor is given by the formula;
C = ε_o•A/d
While energy stored in plates capacitor is given as; U_o = Q²/2C
Now,we are told that that all the dimensions of the capacitor plate is doubled. Thus, we now have;
C' = ε_o•4A/2d
Hence, C' = 2C
so capacitance is now doubled
Thus, the final energy stored between the plates of capacitor is given as;
U_f = Q²/2C'
From earlier, we saw that C' = 2C.
Thus;
U_f = Q²/2(2C)
U_f = Q²/4C
Rearranging, we have;
U_f = (1/2)(Q²/2C)
From earlier, U_o = Q²/2C
Hence,
U_f = (1/2)(U_o)
Or
U_f = (U_o/2)
In your own words, discuss how energy conservation applies to a pendulum. Where is the potential energy the most? Where is the potential energy the least? Where is kinetic energy the most? Where is kinetic energy the least?
Answer:
Explanation:
Energy conservation applies to the swinging of pendulum . When the bob is at one extreme , it is at some height from its lowest point . So it has some gravitational potential energy . At that time since it remains at rest its kinetic energy is zero or the least . As it goes down while swinging , its potential energy decreases and kinetic energy increases following conservation of mechanical energy . At the At the lowest point , its potential energy is least and kinetic energy is maximum .
In this way , there is conservation of mechanical energy .
For the cellar of a new house, a hole is dug in the ground, with vertical sides going down 2.10 m. A concrete foundation wall is built all the way across the 8.90 m width of the excavation. This foundation wall is 0.189 m away from the front of the cellar hole. During a rainstorm, drainage from the street fills up the space in front of the concrete wall, but not the cellar behind the wall. The water does not soak into the clay soil. Find the force that the water causes on the foundation wall. For comparison, the weight of the water is given by 2.10 m ✕ 8.90 m ✕ 0.189 m ✕ 1000 kg/m3 ✕ 9.80 m/s2 = 34.6 kN.
Answer:
The force on the foundation wall is [tex]F_f = 191394 \ N[/tex]
Explanation:
From the question we are told that
The depth of the hole's vertical side is [tex]d = 2.10 \ m[/tex]
The width of the hole is [tex]b = 8.90 \ m[/tex]
The distance of the concrete wall from the front of the cellar is [tex]c = 0.189 \ m[/tex]
Generally the area which the water from the drainage covers is mathematically represented as
[tex]A = d * b[/tex]
substituting values
[tex]A = 2.10 * 8.90[/tex]
[tex]A = 18.69 \ m^2[/tex]
Now the gauge pressure exerted on the foundation wall is mathematically evaluated as
[tex]P_g = \rho * d_{avg} * g[/tex]
Here is the average height foundation wall where the pressure of the water is felt and it is evaluated as
[tex]d_{avg} = \frac{h_1 + h_2 }{2}[/tex]
where [tex]h_1[/tex] at the height at bottom of the hole which is equal to [tex]h_1 = 0[/tex]
and [tex]h_2[/tex] is the height at the top of the hole [tex]h_2 = d = 2.10[/tex]
[tex]d_{avg} = \frac{0 + 2.10 }{2}[/tex]
[tex]d_{avg} = 1.05[/tex]
Where [tex]\rho[/tex] is the density of water with constant value [tex]\rho = 1000 \ kg/m^3[/tex]
substituting values
[tex]P_g = 1000 * 1.05 * 9.8[/tex]
[tex]P_g = 10290 \ Pa[/tex]
Then the force exerted by the water on the foundation wall mathematically represented as
[tex]F_f = P_g * A[/tex]
substituting values
[tex]F_f = 10290 * 18.69[/tex]
[tex]F_f = 191394 \ N[/tex]
A small solid conductor with radius a is supported by insulating, nonmagnetic disks on the axis of a thin-walled tube with inner radius b. The inner andouter conductors carry equal currents i in oppositedirections.
Required:
a. Use Ampere's Law to find the magnetic field at any pointin the volume between the conductors.
b. Write the expression for the flux dΦB through anarrow strip of length l parallel to the axis , of width dr, at a distancer from the axis of the cableand lying in a plane containing the axis.
c. Integrate your expression from part B over the volumebetween the two conductors to find the total flux produced by acurrent i in the central conductor.
d. Use equation U=(1/2)LI2 to calculate the energy stored in the magnetic field for alength l of the cable.
Answer:
Pls see attached file
Explanation:
A positively charged particle has a velocity in the negative z direction at a certain point P. The magnetic force on the particle at this point is in the negative y direction. Which one of the following statements about the magnetic field at point P can be determined from this data?
a. Bx is positive
b. Bz is positive
c. By is negative
d. By is positive
e. Bx is negative
Answer:
a. Bx is positive
Explanation:
See attached file
Why would physics be used to study light emitted by a star?
O A. Stars form interesting shapes in the sky.
B. Light is very pretty.
O C. The positions of stars control our lives.
O D. Light is a form of energy.
Answer:
O D.
Explanation:
Physics has an aspect that deals with the study of energy
Answer:
D. Light is a form of energy
Explanation:
a football is kicked toward a goal keeper with an initial speed of 20m/s at an angle of 45 degrees with the horizontal .at the moment the ball is kicked the goal keeper is 50m from the player .at what speed and in what direction must the goalkeeper run in order to catch the ball at the same height at which it was kicked
Answer:
3.18 m/s
Explanation:
Given that
Initial speed of the ball, u = 20 m/s
Angle of inclination, θ = 45°
Distance from the ball, h = 50 m
Using equations of projectile to solve this, we have
We start by finding the time of flight, T
T = 2Usinθ/g
T = (2 * 20 * sin45)/9.8
T = (40 * 0.7071) / 9.8
T = 28.284/9.8
T = 2.89 s
Next we find the Range, R
R = u²sin2θ/g
R = (20² * sin 90) / 9.8
R = (400 * 1) / 9.8
R = 400/9.8 = 40.82 m
Distance the gk must cover
40.82 - 50 m
-9.18 m or 9.18 m in the opposite direction.
Speed of the GK = d/t
9.18 / 2.89 = 3.18 m/s