Five waves measure 25 cm and pass a point in 1 s. What is:
the wavelength
the frequency
the period?

We can say that When K3PO4 is dissolved in water , the number of potassium ions present in the solution is three times the number of phosphate ions in the solution .

What are Ionic compounds ?

Ionic compounds can be defined as ionic bonds or chemical bonds formed by oppositely charged ions held together by electrostatic forces.

These are usually formed between metals and non-metals. Atoms always tend to acquire stable electronic configurations when atoms lose electrons to form cations, and anions are formed when atoms gain electrons. These two oppositely charged atoms together form an ionic bond, which is called an ionic bond.

Ionic compounds, also called ionic compounds, are held together by electrostatic forces. Ionic compounds are also formed when the electronegativity difference between two atoms is large. This causes one atom to attract more electrons than the other, resulting in electron loss and electron gain within the atom.

To known more about Ionic compounds  ,click the given link ;

https://brainly.com/question/22760798

#SPJ4

Oxygen is important in the oxidation of glucose because it involves breakdown of glucose in presence of oxygen to produce a large amount of energy.

Glucose oxidation breaks down glucose to create energy.  Oxidation of glucose in the presence of oxygen is called respiration. Oxidation means addition of oxygen to a molecule. Respiration is the chemical process by which organic compounds change into different reactions. Glucose reacts with molecular oxygen to produce carbon dioxide and water. The carbon atoms in glucose are oxidized. It produces less amount of energy in absence of glucose. Presence of oxygen in glucose breakdown produces carbon dioxide and water along with the release of large amounts of energy. So, oxygen is necessary for glucose breakdown.

To learn more about breakdown of glucose please visit:

https://brainly.com/question/14505398

#SPJ4

The atom get smaller when more particles are added as forces of attraction between protons and electrons increase.

The attraction between the nucleus and shell grows as we add additional protons and electrons, which causes the shell to shrink. The atom shrinks as a result. Your final and first-to-last paragraphs are attempting to mimic the behavior of electrons; the first cannot increase and should remain the same, while the second is contracting.

To know more about, atoms click here,

brainly.com/question/26952570

#SPJ4

Atom in

a- hydrogen gas - H atom

b - Salt = Sodium atom and chlorine atom

c - Methane - carbon , hydrogen atom

d - carbon dioxide = carbon , oxygen atoms

e - oxygen gas = oxygen atom

f - water = hydrogen and oxygen tom

g - hydrochloric acid =  hydrogen and chlorine atoms

h - sodium hydroxide = sodium , oxygen and hydrogen atom

I - carbonated water - carbon , oxygen , hydrogen atoms

What is an atom ?

An atom is a particle of matter that uniquely defines a chemical element. Atoms consist of a central nucleus surrounded by one or more negatively charged electrons. Atoms, the smallest units that can decompose matter without emitting charged particles. It is also the smallest unit of matter with the characteristic properties of chemical elements. As such, atoms are the basic building blocks of chemistry.

To know about atom from the link

https://brainly.com/question/6258301

#SPJ13

93.7 grams of copper(ii) oxide are produced when 1.00 kg of the copper ore is processed .

What is combustion ?

Combustion, a chemical reaction between substances, usually containing oxygen, that involves the production of heat and light, usually in the form of a flame. The speed or rate at which reactants combine is partly due to the nature of the chemical reaction itself, and partly due to the more energy produced than can escape to the surrounding medium, the temperature of the reactants is used to rise. further accelerate the reaction.

A well-known example of a combustion reaction is a lit match. When you light a match, the friction heats the head to a temperature at which the chemicals react, producing more heat than escaping into the air and burning in a flame.

To learn more about the combustion , click the given link ;

https://brainly.com/question/13251946

#SPJ4

Taking into account the definition of Avogadro's Number, 1.98759×10²⁴ atoms are in 3.3 moles of potassium sulfide.

Avogadro's number is currently defined as the number of atoms in 12 grams of carbon-12 and its known approximate value is 6.023×10²³. Indicates the amount of substance (usually atoms or molecules) that contains one mole of any substance.

You can apply the following rule of three: if by definition of Avogadro's Number 1 mole of potassium sulfide contains 6.023×10²³ atoms, 3.3 moles of the compound contains how many atoms?

amount of atoms of potassium sulfide= (3.3 moles × 6.023×10²³ atoms)÷ 1 mole

amount of atoms of potassium sulfide= 1.98759×10²⁴

Finally, in 3.3 moles of K₂S are present 1.98759×10²⁴ atoms.

Learn more about Avogadro's Number:

brainly.com/question/11907018

brainly.com/question/1445383

brainly.com/question/1528951

#SPJ1

Answer:

You determine the valence electrons by using the Periodic Table.

Let's assume you're using a table that has the groups numbered 1-18.

The electron configurations of ions are those of the neutral atoms plus or minus a number of electrons equal to the charge on the ion.

The pressure inside the vessel at temperature of 35 degree Celsius is 0.51atm.

According to the ideal gas equation,

PV = nRT

Where,

P is the pressure of the vessel,

V is the volume of the vessel which is 2.9 L in this case,

n is the number of moles of gas,

R is the gas constant,

T is the temperature of the gas.

n = 2.6/44

R = 0.082 m³-atm/kmol-K

Temperature = (35+273) K.

Temperature = 308° K

Putting the values,

P = 2.6/44 x 0.082 x 308/2.9

P = 0.51 atm.

The pressure of the vessel is 0.51 atm.

To know more about ideal gas equation, visit,

https://brainly.com/question/20348074

#SPJ4

There are two atoms of hydrogen on the reactant side of the equation.

What we try to show on paper are the changes that substances can undergo. A reaction is said to occur when two or more substances are combined together. The combination of the substances would now lead to the rearrangement of bonds and then the formation of a new product.

We know that it is one of the rules of writing a balanced chemical reaction equation that the number of the atoms of each element on the reactant side must be the same as the number of atoms of the same element on the products side.

When we look at the reaction as shown, we can see that the reaction is balanced hence we can be able to find the number of atoms of hydrogen on the reactants side by doing an atom count.

earn more about reaction:https://brainly.com/question/28984750

#SPJ1

The titrant for this exercise. suppose Ca(OH)₂ were used as the titrant, instead of NaOH. This will make the titrant twice as concentrated in hydroxide ion. the analyte will still be HC₂H₃O₂. the stoichiometry ratio of  HC₂H₃O₂ to Ca(OH)₂ is 1 : 2.

The balanced reaction of the given condition as follow :

 Ca(OH)₂   +      2HC₂H₃O₂      ------>     Ca(C₂H₃O₂)₂     +    2H₂O

from the equation it is clear that stoichiometry of Ca(OH)₂ is 1 and the stoichiometry of HC₂H₃O₂    is 2. therefore the stoichiometry ratio of  HC₂H₃O₂ to Ca(OH)₂ is 1 : 2.

Thus, The titrant for this exercise. suppose Ca(OH)₂ were used as the titrant, instead of NaOH. This will make the titrant twice as concentrated in hydroxide ion. the analyte will still be HC₂H₃O₂. the stoichiometry ratio of  HC₂H₃O₂ to Ca(OH)₂ is 1 : 2.

To learn more about stoichiometry here

https://brainly.com/question/13145466

#SPJ4

Answer:

It is a Binary Compound

Explanation:

Answer:

[binary compound]

Explanation:

A(n) A binary compound is one that contains two, and only two, elements.

Answer:

each chlorine atom will lose one electron

The chemicals that accumulate in soil and water as a result of car emissions, improperly disposed waste, industry, and agriculture are known as persistent organic pollutant.

Organic molecules that are resistant to environmental deterioration through chemical, biological, and photolytic processes are persistent organic pollutants, sometimes referred to as "forever chemicals."

They are dangerous compounds that have a negative impact on the environment and human health all over the world.

POPs are compounds that are persistent in the environment, bioaccumulate in the food chain, and have the potential to have negative impacts on both human health and the ecosystem.

Thus, persistent organic pollutants are hazardous compounds that have a negative impact on the environment and human health all over the world.

To learn more about  persistent organic pollutant, follow the link;

https://brainly.com/question/10269742

#SPJ1

The percentage yield of the given reaction was supposed to be

the formula for the calculation of the percentage yield was =actual yield/theoretical yield X 100

What is percentage yield ?

The percent yield equation is as follows:

(actual yield/theoretical yield) x 100% Equals percent yield

Where: actual yield is the quantity of product received from a chemical reaction theoretical yield is the amount of output obtained from the stoichiometric or balanced equation, utilizing the limiting reactant to calculate product (moles or grams).

The quantity of products generated from a chemical reaction is referred to as the real yield. The theoretical yield is the quantity of product calculated from the stoichiometric or balanced equation utilising the limiting reactant to determine product.

=(0.988/1.61) X 100

=61.36%

the percentage yield of the reaction was found to be 61.36%

To learn more about percentage yield follow the given link: https://brainly.com/question/27997520

#SPJ1

brittle metal would experience this type of failure

Glass, ceramic, graphite, and some alloys with very low plasticity are examples of brittle materials. In these materials, cracks can start without plastic deformation and quickly progress to brittle breakage. It is a steel-gray, lightweight metal called beryllium. It is also highly brittle, which means that it fractures easily when under stress but does not typically distort before it does so (similar to glass or ceramic). Beryllium is a naturally occurring element found in over 100 different minerals and has a wide range of modern-day applications. Cast iron has a rough feel and is more brittle because it includes 2% to 3.5% carbon. Despite being made of alloyed metals, carbon steel lacks other alloying components, hence despite being an alloy, it is not classified as an alloy.

learn more about alloy here;

https://brainly.com/question/1759694

#SPJ4

The earth’s magnetic poles are in the general direction of the planet’s geographic poles. the phrase "general direction" mean  different and complete opposite way.

A bar magnet that is suspended freely will always point north-south. This is a result of the bar magnet's south pole being drawn to the Earth's magnetic north pole (geographic south).

Geographic and magnetic poles on Earth are generated by various sources, thus they are not perfectly aligned. The outer core's swirling currents of liquid iron are what generate the Earth's magnetic field.

Thus, Option D is correct.

To learn more about magnetic and geographic pole follow the link below;

https://brainly.com/question/14609670

#SPJ1

Ammonia as proof that nitrate was converted to ammonia in the cultivation of nitrate broth Because amino acids are produced during protein synthesis, amino acid metabolism will always exist.

Nitrifying microorganisms in the soil change ammonia into nitrates. Nitrates are taken up by plants from the soil and used to assemble proteins. Animals may consume the plant, and its biomass may be used to produce animal protein.

The process of nitrate (NO3) being used as an electron acceptor for respiration microbes results in dissimilatory nitrate reduction to ammonium (DNRA), also known as nitrate/nitrite ammonification.

Read more about nitrate reduction at

https://brainly.com/question/29316155

#SPJ4

Carbonated water is used makes sprite a substitute for egg in baking

Carbonated water can add moisture to recipes, but it also works as a great leavening agent

What is carbonated water ?

Carbonated water (soda water, bottled water, sparkling water, club soda, gassed water, also known as bottled water in many places, especially in the United States as seltzer or seltzer water) contains dissolved carbon dioxide. It is also water containing gas. It is artificially injected under pressure or occurs by natural geological processes. Carbonation creates tiny bubbles, giving the water a carbonation quality. Common forms include sparkling natural mineral water, club soda, and commercial sparkling water.

Carbonated water can add moisture to recipes, but it also works as a great leavening agent. Carbonation traps air bubbles and makes the finished product light and fluffy. You can substitute 60 grams of sparkling water per egg. This alternative is great for cakes, cupcakes and quick breads

To know about carbonated water from the link

https://brainly.com/question/7657029

#SPJ13

The concentration of H₃O⁺ present in a solution of HCL is 7.76247 × 10⁻⁴.

Since we know,

pH<7, therefore there are only H₃O+ particles in the solution.

[H₃O⁺ ] = [tex]10^{-pH}[/tex] = [tex]10^{3.110}[/tex] = 7.76247× 10⁻⁴

Pure water will have fewer hydroxide and hydronium ions. They can combine to form water. There will be a dynamic equilibrium between the concentration of molecules of water and ions. The definition of pH states that negative logarithms of hydronium ion concentration. The self-ionization will take place and increase the H⁺ concentration and side by side reduce the OH⁻ concentration.

To learn more about concentration and pH and solutions,

https://brainly.com/question/4154626

#SPJ4

Using the Henderson equation , pH = pKₐ + log(salt/acid)

pH-value for given mixture is 4.74

When a strong base like potasium hydroxide (KOH ) reacts with weak acid like acetic acid (CH₃COOH) form a salt ( CH₃COOK ) and water . This type of reaction is called Neutralization reaction.

CH₃COOH (aq) + KOH (aq) ------> CH₃COO⁻K⁺ (aq) + H₂O(aq)

Given that

= 5 × 10⁻³mol

Now , using the Henderson-Hasselbalch equation to find the p-H value

p-H = pKa + log ( salt or conjugate base / weak acid ) ------(1)

where Kₐ is dissociation constant

Since, Kₐ value for acetic acid is 3.8×10⁻⁵

=> pKₐ = 4.74

put the values in (1)

p-H = 4.74 + log ( 5/5) = 4.74 + 0 = 4.74

So, p-H value for solution is 4.74 ..

p-H value of substance or solution refered the nature of solution is acidic or basic .

To learn more about p-H value , refer :

https://brainly.com/question/26424076

#SPJ4

The current that flows in the circuit is obtained as 1.23 A.

We know that the RLC circuit is one that contains a resistor in addition to a capacitor or an inductor. In either case, the resistance that is offered to the flow of current by the capacitor or the inductor as the case may be is called the reactance.

Given that;

Impedance (Z) = √R^2 + XC^2

R = resistance

XC = capacitive reactance

Z = √(40)^2 + (70)^2

Z = 81 ohms

Now;

V = IZ

V = voltage

I = current

I = V/Z

I =  100 volts/81 ohms

I = 1.23 A

Learn more about impedance:https://brainly.com/question/2263607

#SPJ1

The total entropy change is 1.036 JK/K

Entropy means the unavailable energy associated with the system. The entropy generation for the reversible cycle is zero and for irreversible cycle, it is positive. We can also understand entropy to be randomness of a system, Randomness is maximum in gaseous state and least in solid state.

The given data; the amount of heat transferred by the thermal reservoir is Q = 100KJ. Temperature of the high thermal reservoir is [tex]T_{h}[/tex] = 1150k.

The temperature of the low thermal reservoir is [tex]T_l[/tex] = 600K.

[tex]d_{s}[/tex] = -Q + Q

        [tex]T_{h}[/tex]   [tex]T_{l}[/tex]

Substituting the formula we get

[tex]d_{s}[/tex] = - 100KJ   +  1OOKJ

        1150K         600K

= 1.036 KJ/K

To know more about entropy

https://brainly.com/question/13146879

#SPJ4

Answer:

0.76moles of sucrose

Explanation:

1 mol = 6.022 x 10^23 molecules

4.6 x 10^23 molecules = X x 6.022 x 10^23

X = 0.7639

X = 0.76moles

The concentration of the KBr solution is 0.168 M.

What is molarity?

The quantity of a substance in a given volume of solution is known as its molarity (M). The number of moles of a solute each liter of a solution is known as molarity. The molar concentration of a solution is another term for molarity.

Explanation:

M1V1 = M2V2,

where M1 is the initial concentration,

V1 is the initial volume,

M2 is the concentration,

V2 is the total final volume.

Have to find the initial and final volume of the solution,

V1=100/1000=0.1

V2=500/1000=0.5

By rearranging the above equation, we get

M2=M1V1/V2

=0.840 x 0.1/0.5=0.168 M.

Therefore, the concentration of the KBr solution is 0.168 M.

To learn more about molarity from the given link.

https://brainly.com/question/26873446

#SPJ4

The addition products formed after the reaction are 4-bromo-2-hexene and 2-bromo-3-hexene.

The simplest type of electrophilic reaction to visualize is the addition of as haloacid such as Hbr to an isolated alkene.

The reaction starts between terminal carbon of the double bonds and H⁺. After attaching H⁺ to the carbon, one double bond disappears leaving nearby CH respectively charged. This intermediate is a resonance hybrid of two possible structures. Reaction of bromide at one of the carbons give the 1.2-addition product and at the other carbon gives 1,4-addition product.

learn more about electrophilic reaction: https://brainly.com/question/14803468

#SPJ4

The molecular art depicts the following reversible reaction at equilibrium: CO( g) + Cl₂ ( g) image COCl₂( g).  the equilibrium constant, k, for he given  reaction is above one  , that means K > 1.

The chemical reaction is given as :

CO( g)   +    Cl₂ ( g)   ⇄    COCl₂( g)

the equilibrium constant is given as :

K = [ COCl₂ ] / [ CO ] [  Cl₂ ]

here, K > 1

Thus, The molecular art depicts the following reversible reaction at equilibrium: CO( g) + Cl₂ ( g) image COCl₂( g).  the equilibrium constant, k, for this reaction is greater than 1, K > 1.

To learn more about equilibrium constant here

https://brainly.com/question/10038290

#SPJ4

The semi-crystalline polymer of the same composition, a completely amorphous polymer is expected to the crystallites scatter light.

Crystallization of polymers is a manner associated with the partial alignment of their molecular chains. these chains fold together and shape ordered areas called lamellae, which compose larger spheroidal systems named spherulites.

Semi-crystalline plastics can be taken into consideration for a selection of applications. choosing a plastic material for use in excessive temperature surroundings calls for a cautious assessment of fabric residence information. View our interactive Thermoplastics Triangle to evaluate substances.

Polyethylene is a partially crystalline solid whose residences are exceedingly dependent on the relative content of the crystalline section and amorphous section, i.e., crystallinity. Polyethylene is a polymer polymerized from monomeric ethylene.

Learn more about semi-crystalline polymer here:-https://brainly.com/question/28383719

#SPJ4

The oxidation numbers of the elements show us the number of electrons lost or gained which is traceable from the electron configuration which in turn depends on the group that the atom belongs to.

The oxidation number is the number of charges that an atom appears to have. We know that the elements that we find in the groups  IA through VIA only have a narrow range of oxidation numbers. This is because the oxidation numbers does depend on the number of electrons that the atom can be able to loose or gain at a time.

We know that each of the groups are known by the maximum number of electrons that can be found on the outermost shell of the atom. This is part of the electron configuration of the atom. Thus, if we know the group that an atom belongs to, we can at least tell the outer electron configuration of the atom because we know that all the atoms in that group have the same outer electron configuration.

Learn more about electron configuration:https://brainly.com/question/14283892

#SPJ1