for digital distribution of reports and proposals, you shoulda.request a notice when the report or proposal is received.b.send wordperfect files, rather than microsoft word or pdf.c.send the documents multiple times as email attachments, just to make sure they get there.d.ask the readers what format they would like to receive reports in.e.always send documents as word- processor files, unless the audience requests otherwise.

abMethod is a custom method that takes two arguments - a string and a substring to search for within that string, the expected output would be "si the so" as it matches the substring "ng" from "sing the song".

The method call abMethod("sing the song", "ng") appears to be incomplete, as the method name and its implementation are not specified. However, if the substring is not found in the given string, the abMethod implementation might throw a StringIndexOutOfBoundsException. This exception is thrown when an index is either negative or greater than or equal to the size of the string. In this case, it is possible that the abMethod implementation would not return anything and instead throw an exception.

Learn more about abMethod here:

https://brainly.com/question/31979236

#SPJ11

To fit a multiple linear regression (MLR) model with a slope for var2, var3, and an interaction between var2 and var3 using PROC GLM, follow these steps:

1. Ensure your dataset is in the correct format and has the necessary variables (var2 and var3).
2. Use the PROC GLM statement to specify the dataset you're working with, like this:
```
proc glm data=your_dataset;
```
3. Define the model by including the main effects of var2 and var3, as well as their interaction, using the asterisk (*) symbol:
```
model response_variable = var2 var3 var2*var3;
```
4. Close the PROC GLM statement with a "run;" command:
```
run;
```

By following these steps, you will fit an MLR model with slopes for var2, var3, and their interaction using PROC GLM in SAS.

learn more about multiple linear regression (MLR)  here:

https://brainly.com/question/29855836

#SPJ11

The code has a variable naming error, where "leftover" is named "leftovers". To fix the code, rename "leftovers" to "leftover" in the print statement, as well as fix the variable name where it is assigned.

The junior programmer's code attempts to calculate the number of boxes that are left over after crates have been filled. However, the code contains a variable naming error, where the variable "leftover" is referred to as "leftovers" in the print statement. The correct code should assign the value of the modulo operation of boxes and crates to the variable "leftover" and then print the value of "leftover". The correct print statement should refer to the variable "leftover" without the "s". By fixing the variable naming error, the code will be able to correctly calculate and display the number of boxes that are leftover after the crates have been filled.

Learn more about junior programmers here:

https://brainly.com/question/15177588

#SPJ11

Here is an implementation of the selection sort algorithm in C++ as a template function that can be used for sorting arrays of various types:

template <typename T>

void selectionSort(T arr[], int n) {

   int i, j, min_idx;

   for (i = 0; i < n-1; i++) {

       min_idx = i;

       for (j = i+1; j < n; j++) {

           if (arr[j] < arr[min_idx])

               min_idx = j;

       }

       T temp = arr[min_idx];

       arr[min_idx] = arr[i];

       arr[i] = temp;

   }

}

To test this function for different data types, you can create arrays of integers, characters, floats, and doubles, and call the function with the array and the size of the array as arguments. Here's an example of how to do this:

#include <iostream>

using namespace std;

template <typename T>

void selectionSort(T arr[], int n);

int main() {

   int int_arr[] = {3, 1, 4, 2, 5};

   char char_arr[] = {'e', 'c', 'b', 'a', 'd'};

   float float_arr[] = {3.4, 1.2, 4.5, 2.1, 5.6};

   double double_arr[] = {3.14159, 1.23456, 4.56789, 2.34567, 5.67891};

   selectionSort(int_arr, 5);

   selectionSort(char_arr, 5);

   selectionSort(float_arr, 5);

   selectionSort(double_arr, 5);

   cout << "Sorted int array: ";

   for (int i = 0; i < 5; i++)

       cout << int_arr[i] << " ";

   cout << endl;

   cout << "Sorted char array: ";

   for (int i = 0; i < 5; i++)

       cout << char_arr[i] << " ";

   cout << endl;

   cout << "Sorted float array: ";

   for (int i = 0; i < 5; i++)

       cout << float_arr[i] << " ";

   cout << endl;

   cout << "Sorted double array: ";

   for (int i = 0; i < 5; i++)

       cout << double_arr[i] << " ";

   cout << endl;

   return 0;

}

template <typename T>

void selectionSort(T arr[], int n) {

   int i, j, min_idx;

   for (i = 0; i < n-1; i++) {

       min_idx = i;

       for (j = i+1; j < n; j++) {

           if (arr[j] < arr[min_idx])

               min_idx = j;

       }

       T temp = arr[min_idx];

       arr[min_idx] = arr[i];

       arr[i] = temp;

   }

}

This program outputs:

Sorted int array: 1 2 3 4 5

Sorted char array: a b c d e

Sorted float array: 1.2 2.1 3.4 4.5 5.6

Sorted double array: 1.23456 2.34567 3.14159 4.56789 5.67891

As you can see, the selection sort function works correctly for all four data types.

To know more about  selection sort,

https://brainly.com/question/13161882

#SPJ11

Zipcodes are typically stored as character or string types, such as char or varchar, rather than numeric types because they serve as identifiers rather than mathematical values. The standard length for a US zipcode is 5 digits, but a slightly larger length, such as 6 or 7, may be used to allow for the possibility of longer zipcodes in the future or to accommodate postal codes from other countries. A field length of 9 or 10 may be appropriate if storing both US and international postal codes in the same field. Using a character type and appropriate field length ensures that zipcodes are stored accurately and can be easily retrieved when needed.

To know more about zipcode click here:

brainly.com/question/32075275

#SPJ11

To explain changes in video game console market share, one additional yearly variable that could be included is the release of new games. The popularity and success of new games can greatly impact consumer demand for certain consoles, leading to shifts in market share.

Additionally, changes in technology and advancements in graphics and processing power can also influence consumer preferences and ultimately impact market share. Other potential yearly variables to consider may include changes in pricing strategies, marketing efforts, and partnerships or collaborations with other companies in the industry.

New report shows piece of the pie and more between Nintendo, Sony and Microsoft. Ampere Examination information uncovers that the 2022 worldwide control center gaming market declined by 7.8%* (steady cash - 2.1%) to $56.2bn, down from $60.9bn in 2021.

Know more about console market share. here:

https://brainly.com/question/28752013

#SPJ11

The expected output of running "gitlet rm game.txt" and then checking "gitlet status" would be that "game.txt" will show up as a "deleted" file in the staging area. However, since the file is not actually deleted from the current working directory (cwd), it will still show up in the cwd as well.

When running "gitlet rm game.txt", the file "game.txt" will be removed from the staging area and marked for deletion in the next commit. Therefore, when checking "gitlet status", the file will appear in the "Changes to be committed" section as a "deleted" file. However, since the file is not actually deleted from the cwd, it will still appear in the "Untracked files" section of the status output. It's important to note that while the file may still exist in the cwd, it will not be included in future commits unless it is added back to the staging area with "gitlet add"

To know more about the .gitlet status, click here;

https://brainly.com/question/31982496

#SPJ11

In the worst case scenario, binary search requires log2(720) comparisons to find a result in an array of 720 elements. This is because binary search halves the search space in each iteration. Therefore, the maximum number of comparisons required is 9.

Binary search is a search algorithm that operates on a sorted array by repeatedly dividing the search interval in half until the target value is found or determined to be not present. The number of comparisons required for binary search is logarithmic with respect to the size of the array. Specifically, the maximum number of comparisons required to find an element in an array of n elements is log2(n), where log2 denotes the base 2 logarithm. For an array of 720 elements, the maximum number of comparisons required for binary search is log2(720) = 9.485. Therefore, in the worst-case scenario, it takes 10 comparisons to find a result. Binary search is an efficient algorithm for searching large arrays and has applications in various fields such as computer science, engineering, and data analysis.

Learn more about Binary search here:

https://brainly.com/question/31605257

#SPJ11

A good example of the wat you can make a GUI program using the tkinter module in Python to calculate the total charges for selected services is given below

Based on the code given, one need to keep the code in a Python document, execute it, and a graphical interface will emerge displaying checkboxes for every service.

Upon choosing a service and clicking on the "Calculate" button, the corresponding charges will appear on the bottom label. Note that this code relies on the presence of Tkinter, which is usually bundled with Python.

Learn more about PYTHON  from

https://brainly.com/question/26497128

#SPJ1



6. Joe's Automotive

Joe's Automotive performs the following routine maintenance services:

Oil change-$30.00

• Lube job-$20.00

Radiator flush-$40.00

• Transmission flush-$100.00

• Inspection-$35.00

• Muffler replacement-$200.00

• Tire rotation-$20.00

Write a GUI program with check buttons that allow the user to select any or all of these services. When the user clicks a button, the total charges should be displayed.

An information security project team should be composed of individuals with different backgrounds and skill sets, depending on the specific needs of the project. Here are some roles and expertise that may be valuable to include in addition to the champion and team leader:

Information Security Analysts: These individuals can help identify and assess the risks and vulnerabilities associated with the project, as well as recommend and implement appropriate security controls.Network Engineers: They can help design and implement secure network infrastructure and protocols.Application Developers: They can help identify and remediate security flaws in the application code and ensure that the application adheres to security best practices.Security Operations Center (SOC) Analysts: They can monitor the system for security incidents and respond to them in a timely manner.Compliance Experts: They can ensure that the project is compliant with relevant regulations and standards such as HIPAA, PCI-DSS, or GDPR.Project Manager: They can ensure that the project is delivered on time, within budget, and meets the stakeholders' requirements.Business Analysts: They can help understand and document the project's requirements, as well as identify and prioritize business needs.

To know more about project click the link below:

brainly.com/question/28940967

#SPJ11

True. When passing a pointer to a function in C++, the pointer itself is passed by value, which means that the function gets a copy of the pointer and not the original pointer.

When a function receives a pointer as a parameter, the pointer is passed by value, meaning that a copy of the pointer is created and passed to the function. However, since the pointer contains the memory address of the variable it points to, it allows the function to access and modify the contents of that memory location, even though it only has a copy of the pointer. This is a powerful feature of pointers and allows for more efficient memory management and data manipulation in programs.

To learn more about function
https://brainly.com/question/11624077
#SPJ11

Here is an example of how you can extend the BST class with the three requested functions: nonRecursiveMin(), nonRecursiveMax(), and height().

#include <stack>

// Extend the BST class

class BSTExtended : public BST {

public:

   // Non-recursive min

   int nonRecursiveMin() {

       if (root == nullptr) {

           throw std::runtime_error("Tree is empty");

       }

       Node* current = root;

       while (current->left != nullptr) {

           current = current->left;

       }

       return current->data;

   }

   // Non-recursive max

   int nonRecursiveMax() {

       if (root == nullptr) {

           throw std::runtime_error("Tree is empty");

       }

       Node* current = root;

       while (current->right != nullptr) {

           current = current->right;

       }

       return current->data;

   }

   // Height of the tree

   int height() {

       return calculateHeight(root);

   }

private:

   // Helper function to calculate the height recursively

   int calculateHeight(Node* node) {

       if (node == nullptr) {

           return 0;

       }

       int leftHeight = calculateHeight(node->left);

       int rightHeight = calculateHeight(node->right);

       return std::max(leftHeight, rightHeight) + 1;

   }

};

Explanation:

The BSTExtended class is derived from the existing BST class.

The nonRecursiveMin() function uses an iterative approach to find the minimum value in the BST. It starts from the root and keeps traversing to the left until it reaches the leftmost node, which will contain the minimum value.

The nonRecursiveMax() function follows a similar approach but traverses to the right until it reaches the rightmost node, which will contain the maximum value.

The height() function calculates the height of the tree recursively. It uses a helper function calculateHeight() to traverse the tree and determine the maximum height between the left and right subtrees.

The height of an empty tree is considered 0, a tree with only the root node has a height of 1, and the height increases by 1 for each additional level or layer of nodes.

The BSTExtended class extends the BST class by adding three new functions: nonRecursiveMin(), nonRecursiveMax(), and height(). These functions provide non-recursive implementations to find the minimum and maximum values in the BST and calculate the height of the tree. The nonRecursiveMin() and nonRecursiveMax() functions iterate through the tree's left and right branches, respectively, until they reach the minimum or maximum value. The height() function uses recursion to calculate the height of the tree by finding the maximum height between the left and right subtrees. By extending the BST class with these additional functions, you can perform these operations efficiently and conveniently on binary search trees in C++.

To know more about functions ,visit:

https://brainly.com/question/179886

#SPJ11

The given method is a recursive function in Java that takes an integer as input and returns an integer as output. The output from the given method when called with mystery(123) is 1.

The method named "mystery" takes an integer "n" as input. If the integer "n" has only one digit (i.e., (n/10) == 0), then the method returns the same digit. If the integer "n" has more than one digit, the method calls itself recursively with "n/10" as input until the input becomes a single digit. Then, the method returns the single digit as the output. To be more specific, when the method is called with mystery(123), it checks if 123/10 is equal to zero. Since it is not equal to zero, the method calls itself recursively with 12 as input (mystery(12)). Again, the method checks if 12/10 is equal to zero. Since it is not equal to zero, the method calls itself recursively with 1 as input (mystery(1)). Now, the method checks if 1/10 is equal to zero, and it is equal to zero. Therefore, the method returns 1 as the output.

To learn more about recursive function, visit:

https://brainly.com/question/30027987

#SPJ11

Note that the  computer systems that laura should implement on her farm is: "soil sensor" (OPion C)

The soil moisture sensor (SMS) is a sensor that is linked to an irrigation system controller that checks soil moisture content in the active root zone before each planned watering event, bypassing the cycle if soil moisture exceeds a user-defined set point.

Soil moisture sensors help in water management. Good irrigation management results in better crops, lower input costs, and increased profitability.

Soil moisture sensors assist irrigators in understanding what is occurring in a crop's root zone.

Learn more about soil sensor at:

https://brainly.com/question/14345230

#SPJ1

To get the software version on the target system, the command "nmap -sV 192.168.1.1" should be used, as it is specifically designed for version detection and provides accurate results.

To get the software version on the target system, the command that can be used is "nmap -sV 192.168.1.1". This command is used to detect the software version of the target system by performing version detection on open ports. The "-sV" option instructs nmap to perform version detection, and "192.168.1.1" is the IP address of the target system.
The "-sS" option is used for TCP SYN stealth scanning, "-O" is used for OS detection, and "nmap 192.168.1.1" is a basic scan that only shows open ports. These commands do not provide information about the software version on the target system.

To know more about software visit:

brainly.com/question/985406

#SPJ11

The muscles of the global stabilization system are primarily responsible for maintaining postural control and stabilizing the spine during movement.

The muscles of the global stabilization system collaborate to support the spine, pelvis, and core, ensuring a solid and sturdy foundation for movement. The global stabilizing muscles are the deep abdominal muscles (transverse abdominis), pelvic floor muscles, multifidus, and diaphragm. These muscles stabilize the spine during dynamic motions, including lifting, bending, and twisting. They collaborate with the local stabilizing and bigger global muscles to provide efficient and regulated movement while reducing the danger of injury or instability.

Learn more transverse abdominal muscles here: https://brainly.com/question/12885640.

#SPJ11      

Answer:

core layer

Explanation:

iOS has four abstraction layers: the Core OS layer, the Core Services layer, the Media layer, and the Cocoa Touch layer.

hopefully this helps u out :)

The "bstwithbft" class is a modification of "bst" with an added "breadth-first traversal" method that allows for a level-by-level traversal of the tree's nodes.

A binary search tree (BST) is a type of data structure that consists of nodes with left and right child pointers. The nodes are ordered in a way that the left subtree of a node contains values that are less than the node's value, and the right subtree contains values greater than the node's value. The "bstwithbft" class is a modified version of BST that includes an additional method called "breadth-first traversal." This method allows for a level-by-level traversal of the tree's nodes, where each level is visited before moving on to the next one. The breadth-first traversal method starts at the root node and visits each level of the tree from left to right. It uses a queue to keep track of the nodes that need to be visited, starting with the root node. The method then dequeues the node, visits it, and enqueues its left and right child nodes. This process continues until all nodes in the tree have been visited. Using the breadth-first traversal method can be useful for a variety of applications, such as finding the shortest path between two nodes, determining the level of a node in the tree, or printing out the tree in a way that reflects its structure.

Learn more about breadth-first traversal here:

https://brainly.com/question/31435680

#SPJ11

To determine the appropriate replacement for XXX in the given algorithm, we need to consider the purpose of the ListSearchRecursive function.

This function aims to recursively search through a linked list to find a node that matches the given key. Thus, the missing statement should be one that compares the current node's data with the key to see if they match.

Therefore, the appropriate replacement for XXX is: "if (node.data == key)". This statement will check if the current node's data matches the key. If it does, the node is returned, indicating that the key was found in the list. If not, the function will continue to recursively search through the remaining nodes until the key is found or the end of the list is reached.

learn more about ListSearch. here:

https://brainly.com/question/30883552

#SPJ11

The name of the short-range wireless technology used for interconnecting devices like a cell phone and speakers is Bluetooth.

Bluetooth technology allows for wireless communication between devices over short distances. It operates on radio frequency and is commonly used for connecting various devices such as smartphones, tablets, speakers, headphones, and other peripherals. Bluetooth provides a convenient and reliable wireless connection for audio streaming, file transfer, and device control, making it widely adopted in consumer electronics and IoT applications.

Bluetooth allows for seamless audio streaming, file sharing, and device synchronization without the need for physical cables. The technology operates on radio frequency and provides a convenient and reliable means of wireless connectivity between compatible devices.

To know more about Bluetooth, visit:

brainly.com/question/28258590

#SPJ11

A/V editing workstations benefit from more than one monitor as it enhances productivity and workflow efficiency. Multiple monitors allow video editors to have a larger visual workspace, enabling them to simultaneously view and manipulate different elements of their projects, access tools and timelines, compare footage, and have better overall control over the editing process.

Video editing involves working with multiple elements such as source footage, timelines, effects, and audio tracks. Having a second monitor provides significant advantages in terms of workflow efficiency and productivity. With multiple monitors, video editors can dedicate one screen to the main video preview or playback while using the other screen for tasks like timeline management, clip organization, tool panels, and other software interfaces. This setup allows for easy access to different parts of the project without constantly switching between windows or tabs, reducing distractions and streamlining the editing process.

Having a second monitor also enables video editors to compare footage side by side, ensuring consistency in color grading, composition, and visual effects. They can view the edited video on one monitor while referencing the original footage or external references on the other, facilitating accurate editing decisions and adjustments. In addition, video editors can utilize the extra screen real estate to keep their workspace clutter-free. They can spread out toolbars, menus, and additional windows, making it easier to access editing tools, effects, and settings without overcrowding the main editing window.

Overall, multiple monitors offer video editors a larger visual workspace, improved multitasking capabilities, and better organization of editing tools and project elements. This results in enhanced productivity, smoother workflow management, and greater control over the editing process.

Learn more about windows here: https://brainly.com/question/31678408

#SPJ11

To select only the three variables "rating", "cocoa.percent", and "company" from the "flavors" data frame using the select() function in R, you can add the following code:

trimmed_flavors_df <- flavors_df %>%

                     select(rating, cocoa.percent, company)

This will create a new data frame named "trimmed_flavors_df" with only the selected variables. The original data frame "flavors_df" will remain unchanged.

Learn more about variables here:

brainly.com/question/32073573

#SPJ11

If you want to access open-exchange mobile web display inventory, you need to create a **mobile web line item**.

In the context of digital advertising, a line item represents a specific advertising campaign or order that is set up within an ad server. It defines the targeting, delivery settings, and other parameters for the ads to be displayed.

To specifically target open-exchange mobile web display inventory, you would create a line item that is specifically configured for mobile web placements. This ensures that the ads associated with that line item are delivered to mobile web environments within open-exchange platforms, allowing you to reach audiences on mobile devices through the open-exchange network.

Learn more about array here:

https://brainly.com/question/13261246

#SPJ11

False. Pointers can be used to access and modify the contents of variables whose memory addresses they contain.

Learn more about Pointers here:

brainly.com/question/32073644

#SPJ11

To generate a random sample of 10,000 values for attendance and concession spending using the transform function in SPSS, you can follow these steps:

Open your dataset in SPSS.

Click on "Transform" from the menu bar.

Select "Compute Variable".

In the "Target Variable" field, enter a name for the new variable you want to create (e.g., "random_attendance").

In the "Numeric Expression" field, enter "RV.UNIFORM(0,100)" to generate random values between 0 and 100 for attendance.

Click on "OK".

Repeat steps 3-6 to create a new variable for concession spending (e.g., "random_concession").

Once both variables have been created, click on "Data" from the menu bar.

Select "Select Cases".

Choose "Random sample of cases" and set the sample size to 10,000.

Click on "OK" to apply the random sampling.

Your new dataset with random values for attendance and concession spending is now ready for analysis!

Learn more about transform function in SPSS from

https://brainly.com/question/27960585

#SPJ11

The given Java code calculates the sum of all elements in the `numbersarray` using a `for` loop and prints the result. The output is "The sum of all elements in numbersarray is: 291".

To calculate the sum of all elements in the `numbersarray`, you can use the following Java code:

```java

int[] numbersarray = { 10, 30, 50, 80, 121 };

int sum = 0;

for (int i = 0; i < numbersarray.length; i++) {

   sum += numbersarray[i];

}

System.out.println("The sum of all elements in numbersarray is: " + sum);

```

1. First, we declare an integer array `numbersarray` and initialize it with the given values.

2. Then, we declare an integer variable `sum` and set its initial value to 0. This variable will store the sum of all elements.

3. Next, we use a `for` loop to iterate over each element in the `numbersarray`.

4. Inside the loop, we add each element to the `sum` variable using the compound assignment operator `+=`.

5. After the loop, we print out the calculated sum using `System.out.println()`.

When you run this code, it will output: "The sum of all elements in numbersarray is: 291", which is the sum of the given elements.

learn more about Java code here:

https://brainly.com/question/30479363

#SPJ11

It is false that the square brackets in an array are actually an operator that simplifies a pointer math and dereference operation.

The square brackets in an array are not an operator that simplifies pointer math and dereference operations. In most programming languages, including C and C++, the square brackets are used as a subscript operator to access elements of an array by specifying the index. It is not related to pointer arithmetic or dereferencing.

Pointer arithmetic involves manipulating memory addresses using pointers, such as incrementing or decrementing a pointer by a certain number of bytes based on the data type it points to. Dereferencing a pointer means accessing the value stored at the memory address pointed to by the pointer.

The square brackets, when used with an array, provide a convenient syntax to access individual elements of the array using the index. It does not directly involve pointer arithmetic or dereferencing.

To know more about array, visit:

brainly.com/question/13261246

#SPJ11

The resolver procedure typically contacts a local DNS server via UDP rather than using TCP for efficiency reasons. UDP is a faster and less resource-intensive protocol compared to TCP, making it a better choice for DNS queries that need to be resolved quickly.

Additionally, UDP is a connectionless protocol that doesn't require the overhead of establishing and maintaining a connection, making it better suited for short, simple requests such as DNS queries. While TCP is generally considered to be more reliable than UDP due to its error correction and flow control mechanisms, these features are not necessary for most DNS queries, which are typically simple and straightforward.

As a result, the use of UDP is a common and widely accepted practice for DNS resolution.A reverse DNS lookup or reverse DNS resolution is the method of querying the Domain Name System in computer networks to find the domain name associated with an IP address. This is different from the typical "forward" DNS lookup, which looks up an IP address from a domain name.

Know more about DNS server, here:

https://brainly.com/question/31263738

#SPJ11

Int sum =0; int max=100; for (int j = 1; j<= max; j++) sum+= 100 (N). The correct option is d. (N).

We have two variables initialized, "sum" and "max".  We then have a for loop that starts at 1 and continues until it reaches the value of "max". Inside the for loop, we have the statement "sum += 100", which adds 100 to the value of "sum" each time the loop runs. Since the for loop runs N times (where N is the value of "max"), the time complexity of this code is O(N).

The given code snippet computes the sum of the numbers from 1 to max (100). The for loop iterates through each number from 1 to max, and in each iteration, it adds 100 to the sum variable. Since the loop iterates through the numbers from 1 to max, the time complexity is directly proportional to the value of max. Hence, the time complexity of this code is O(N), where N is the max value.

To know more about sum visit:-

https://brainly.com/question/13013054

#SPJ11

Here is a C++ program that reads words from a file, finds pairs of rhyming words, and outputs them to the screen. It also displays the total number of words read from the file.

#include <iostream>

#include <fstream>

#include <string>

bool areWordsRhyming(const std::string& word1, const std::string& word2) {

   if (word1.length() < 3 || word2.length() < 3)

       return false;

   return (word1.substr(word1.length() - 3) == word2.substr(word2.length() - 3));

}

int main() {

   std::string filename;

   std::cout << "Enter the filename: ";

   std::cin >> filename;

   std::ifstream file(filename);

   if (!file.is_open()) {

       std::cout << "Failed to open the file." << std::endl;

       return 1;

   }

   std::string word;

   std::string prevWord;

   int count = 0;

   while (file >> word) {

       if (!prevWord.empty() && areWordsRhyming(prevWord, word))

           std::cout << prevWord << " - " << word << std::endl;

       prevWord = word;

       count++;

   }

   std::cout << "Total number of words read: " << count << std::endl;

   file.close();

   return 0;

}

The program prompts the user to enter the filename of the input file containing words. It then uses an ifstream object to open and read the file. The program reads each word from the file using the >> operator and checks if it rhymes with the previously read word.

The areWordsRhyming() function compares the last three characters of two words to determine if they rhyme. If the words rhyme, they are printed to the screen as a pair.

The program keeps track of the total number of words read from the file using a counter variable.

This C++ program allows the user to input a filename containing words. It reads the file, identifies pairs of rhyming words based on the last three characters, and displays them on the screen. Additionally, it outputs the total number of words read from the file. By following the specified assumptions, such as word length and the maximum number of words, the program efficiently processes the input and provides the desired output.


To know more about program ,visit:

https://brainly.com/question/29579978

#SPJ11