From the given reactions, another quantity that is equal to ΔH degree reaction is 1. enthalpy of combustion, 2. 4x bond energy of carbon-hydrogen bond, 3. enthalpy of formation and 4. -4x bond energy of CH bond.
Hence, the correct option is A.
Enthalpy of a reaction is defined as the total sum of the heat of the system in the reaction and the product of the pressure and volume of the system. In the first reaction, the enthalpy of combustion of methane in the presence of oxygen is calculated, which gives the change in heat during burning.
In the second reaction, bond breaking will give the heat change as 4x bond energy of the carbon and hydrogen bond is endothermic.
In the third reaction, the enthalpy of formation of methane will give the change in the enthalpy.
In the fourth reaction, the difference between the bond energies of the reactants and the products that are -4x bond energy of carbon and hydrogen will result in enthalpy change.
Hence, the bond of combustion and formation can be a component along with enthalpy.
Hence, the correct option is A.
To know more about enthalpy here
https://brainly.com/question/14017717
#SPJ4
147 grams of argon to liters
Answer:
Explanation:
3.6797837188344116 mol
what technique is used in this investigation? group of answer choices colorimetry calorimetry gas pressure measurements titration combustion analysis
The technique used in this investigation is titration.
Titration is a laboratory method used to determine the amount or concentration of a substance in a sample. A reagent, known as the titrant, is added to a solution to react with the substance being studied, known as the analyte. The titration endpoint is determined by observing an indicator's colour change or by performing a calculation.
Titration is a common method used in analytical chemistry for quantifying analytes' concentrations. Acid-base titrations, redox titrations, and complexometric titrations are some of the most common types of titrations used in chemistry labs. Titration is used to calculate the amount of acid, base, salt, or other substance in a sample.
Learn more about titration at:
https://brainly.com/question/13307013
#SPJ11
1
Which of the following is a balanced equation for the reaction?
Aluminum Bromide + Chlorine Gas- Aluminum Chloride and
Bromine Gas
A 3AlBr3 + 2Cl₂-3AlCl3 + 2Br₂
B
2AlBr3 + 3Cl₂ → 2AlCl3 + 3Br2
C
2Al3Br + Cl₂ - 2Al3Cl + Br₂
D AlBr3 + 3Cl₂ - AlCl3 + 3Br2
a solution is made using 130.0 ml of acetonitrile (density 0.7766 g/ml) and 250.0 ml of water (density 1.000 g/ml). what is the molality acetonitrile in water?
The molality of acetonitrile in water is 9.84 mol/kg.
Molality is an expression of the amount of solute dissolved in a solvent, which is measured in moles per kilogram. Molality is calculated by dividing the moles of the solute by the mass of the solvent, in kilograms.
In this case, the moles of the solute (acetonitrile) can be calculated by multiplying the volume (130.0 mL) with the density (0.7766 g/mL) and dividing it by its molar mass (41.05 g/mol).
moles of acetonitrile = (130.0 mL)(0.7766 g/mL) / (41.05 g/mol) = 2.459 mol
The mass of the solvent (water) can be calculated by multiplying its volume (250.0 mL) with its density (1.000 g/mL).
mass of water = (250.0 mL) (1.000 g/mL) = 250 g
Thus, the molality of acetonitrile in water is:
molality = (2.459 mol) / (250 g)(1 kg/1000 g) = 9.84 mol/kg.
Learn more about molality here: https://brainly.com/question/24065939.
#SPJ11
write the overall reaction of zinc metal reacting with copper ions in aqueous solution. calculate ecell for this reaction
The overall reaction of zinc metal reacting with copper ions in aqueous solution is Zn (s) + Cu2+ (aq) → Zn2+ (aq) + Cu (s). The standard cell potential (E°cell) for this reaction is +1.10 V.
The overall reaction of zinc metal reacting with copper ions in aqueous solution is as follows: Zn(s) + Cu2+(aq) → Zn2+(aq) + Cu (s). The redox reaction can be written as: Zn(s) → Zn2+(aq) + 2e- (oxidation reaction) Cu2 + (aq) + 2e- → Cu(s) (reduction reaction).
The standard reduction potential (E°) values for Zn2+/Zn and Cu2+/Cu are -0.76 V and +0.34 V, respectively.
The standard cell potential (E°cell) can be calculated using the formula:
E°cell = E°reduction (reduction half-reaction) - E°oxidation (oxidation half-reaction)
E°cell = E°Cu2+/Cu - E°Zn2+/Zn
E°cell = (+0.34 V) - (-0.76 V)
E°cell = +1.10 V
Therefore, the standard cell potential (E°cell) for the reaction is +1.10 V.
For more questions related to standard cell potential.
https://brainly.com/question/29653954
#SPJ11
to double the resolution between two peaks in a chromatographic separation, the length of the column would need to be...?
The length of the column required depends on the type of chromatographic system used.
Generally speaking, increasing the length of the column increases resolution. This is because a longer column provides a greater surface area for the analyte to travel along, which allows for more efficient separation.
For normal-phase liquid chromatography, the resolution between two peaks can be doubled by doubling the column length. For example, if the column length is 10 cm, the resolution can be doubled by doubling the length to 20 cm.
For reverse-phase liquid chromatography, the resolution can be increased by increasing the non-polar character of the stationary phase. This can be achieved by increasing the length of the column, adding a small number of silanol groups to the stationary phase, or increasing the pH.
Additionally, in reverse-phase chromatography, the resolution between two peaks can be increased by increasing the amount of organic modifier in the mobile phase.
In summary,
For normal-phase liquid chromatography, the resolution can be doubled by doubling the column length. For reverse-phase liquid chromatography, the resolution can be increased by increasing the non-polar character of the stationary phase, or by increasing the amount of organic modifier in the mobile phase.
Therefore, the length of the column required to double the resolution between two peaks in a chromatographic separation depends on the type of chromatographic system used.
To know more about chromatographic separation, refer here:
https://brainly.com/question/29442779#
#SPJ11
now you know how much bsa stock solution you need to put into our new vessel. but, we still do not have 10 ml of a 10 mg/ml bsa solution. what do you think you could add to the new vessel to make it the final volume of 10 ml?
2 ml of the 50 mg/ml BSA stock solution is required to be added to the new vessel in order to make the final volume of 10 ml.
If we are not having 10 ml of a 10 mg/ml BSA solution, we then we are required to make it by adding some additional solvent or buffer to dilute the stock solution.
Let us assume that we are having some BSA stock solution, let's say 50 mg/ml, and we need 10 ml of 10 mg/ml BSA solution, we can use the following formula to calculate the required amount of stock solution and solvent:
C1V1 = C2V2
(Here, C1 is the concentration of the stock solution (50 mg/ml), V1 is the volume of the stock solution we need to use (which is unknown), C2 is the desired concentration (10 mg/ml), and V2 is the final volume we want to achieve (i.e. 10 ml).
Rearranging the formula above , we will be getting,
V1 = (C2V2)/C1
Substituting the values we have in the equation, we will be getting,
V1 = (10 mg/ml x 10 ml)/50 mg/ml = 2 ml
Therefore it can be said that we are needed to take 2 ml of the 50 mg/ml BSA stock solution and add it to the new vessel. To make the final volume 10 ml, we need to add 8 ml of the appropriate solvent or buffer.
Learn more about concentration of solutions :
https://brainly.com/question/15458177
#SPJ4
A mixture of 90. 0 grams of CH4 and 10. 0 grams of argon has a pressure of 250 torr under conditions of constant temperature and volume. The partial pressure of CH4 in torr is?
The partial pressure of CH4 in the mixture is 239 torr.
To find the partial pressure of CH4 in the mixture, we need to use the mole fraction of CH4.
First, we need to find the moles of each component in the mixture. The molar mass of CH4 is 16.04 g/mol, so:
moles of CH4 = 90.0 g / 16.04 g/mol = 5.61 mol
The molar mass of Ar is 39.95 g/mol, so:
moles of Ar = 10.0 g / 39.95 g/mol = 0.250 mol
The total number of moles in the mixture is:
total moles = moles of CH4 + moles of Ar = 5.61 mol + 0.250 mol = 5.86 mol
Now we can find the mole fraction of CH4:
mole fraction of CH4 = moles of CH4 / total moles = 5.61 mol / 5.86 mol = 0.957
Finally, we can use the mole fraction to find the partial pressure of CH4 using Dalton's Law of Partial Pressures:
partial pressure of CH4 = mole fraction of CH4 x total pressure
partial pressure of CH4 = 0.957 x 250 torr = 239 torr
Therefore, the partial pressure of CH4 in the mixture is 239 torr.
To know more about pressure click here:
brainly.com/question/12971272
#SPJ4
A rate constant obeys the Arrhenius equation, the factor A 2.2 x 1013 s and the activation energy being 150. kJ mol. What is the value of the rate constant at 227°C, in 6.7x10-22 s-1 b. 2.1x1013 -1 1.5x101 s 4.7x10-3 s1 a. C.
The rate constant at 227°C is a. 6.7 x [tex]10^{-22}[/tex].
How to find the rate constant of a reaction?The Arrhenius equation states that the rate constant (k) is equal to A × e(-Ea/RT).
Given values: A = 2.2 x 10¹³ s⁻¹, Activation energy (Ea) = 150 kJ/mol, Temperature (T) = 227°C = 500 K.
For this, we need to substitute the given values in the Arrhenius equation as
k = A × e(-Ea/RT)
k = 2.2 x 10¹³ s⁻¹ × e(-150000 J/mol / (8.31 J/mol-K × 500 K))
k = 2.2 x 10¹³ s⁻¹ × e(-30.12)
k = 6.69 x 10⁻¹² s⁻¹
Therefore, the value of the rate constant at 227°C is 6.69 x 10⁻¹² s⁻¹. Hence, option A is the correct answer.
To know more about Arrhenius equation:
https://brainly.com/question/30653541
#SPJ11
select a mineral, rock, or gemstone from the united state and explain why you selected it. discuss how the mineral, rock, or gemstone you selected is used in everyday life, and the processes by which they formed.
Answer: I have selected the gemstone turquoise from the United States. Turquoise is a semi-precious gemstone composed of copper aluminum phosphate. It is found in the deserts of Nevada, Arizona, Colorado, and New Mexico. Turquoise has a long history of use, with some pieces found in Ancient Egyptian tombs and Native American jewelry. Turquoise is still used today for making jewelry, figurines, and inlays for furniture. It is also often used to decorate clothes and other items.
Turquoise is created through the process of sedimentary precipitation, which involves the accumulation of minerals in slow-moving water. This process takes thousands of years, and is further shaped by the elements, such as air and water, which break down the mineral and change its color. It can also be artificially altered to improve its color.
In everyday life, turquoise is primarily used for jewelry, but it is also thought to possess healing properties. In some cultures, turquoise is believed to bring good luck and is used to ward off evil spirits. Turquoise has been a popular choice for making jewelry and decorative objects since ancient times. It is a beautiful, vibrant gemstone with a wide range of colors and patterns, which makes it a highly sought after material.
Learn more about minerals here:
https://brainly.com/question/18078524#
#SPJ11
describes a chemical weathering process where the products are typically . oxidation / coal beds hydrolysis / clay minerals precipitation / dissolved bicarbonate ions dissolution / iron oxides (hematite)
Answer: The chemical weathering process that dissolves iron oxides (hematite) is called dissolution.
What is chemical weathering?
Chemical weathering is the process by which rocks and minerals are broken down by chemical reactions. This kind of weathering transforms the original composition of rocks and minerals into new compounds that are more stable at the Earth's surface. Chemical weathering can change the overall appearance, strength, and porosity of rocks over time.
Types of chemical weathering processes Chemical weathering processes can take a variety of forms, such as: Hydrolysis ,Oxidation, Carbonation ,Dissolution.
Students must keep in mind that these processes may occur simultaneously in a specific area to produce new minerals with varied properties. And among the different chemical weathering processes, the one that dissolves iron oxides (hematite) is called dissolution.
What is dissolution?
The process in which a chemical compound is dissolved in a solvent is known as dissolution. It is a physical change rather than a chemical change since the chemical composition of the substance being dissolved is not altered. Dissolution is used in many processes, such as extracting and separating minerals, preparing solutions, purifying liquids, and so on.
Learn more about dissolution here:
https://brainly.com/question/9949108#
#SPJ11
which will form hydrogen bonds between its molecules? a) ch3ch2ch2f b) ch3ch2ch2ch3 c) (ch3)3n d) ch3ch2och3 e) ch3nhch2ch
Option A and D, CH3CH2CH2F and CH3CH2OCH3 will form hydrogen bonds between its molecules. Hydrogen bonding occurs between the polar molecules.
A) CH3CH2CH2F will form hydrogen bonds between its molecules due to the presence of a hydrogen atom and a strongly electronegative fluorine atom. The hydrogen atom will form a polar covalent bond with the fluorine atom, which creates a dipole moment and results in hydrogen bonding between molecules.
B) CH3CH2CH2CH3 will not form hydrogen bonds between its molecules due to the lack of an electronegative atom that can interact with the hydrogen atom to form a polar covalent bond.
C) (CH3)3N will not form hydrogen bonds between its molecules due to the lack of a hydrogen atom to interact with the nitrogen atom.
D) CH3CH2OCH3 will form hydrogen bonds between its molecules due to the presence of a hydrogen atom and a strongly electronegative oxygen atom. The hydrogen atom will form a polar covalent bond with the oxygen atom, which creates a dipole moment and results in hydrogen bonding between molecules.
E) CH3NHCH2CH will not form hydrogen bonds between its molecules due to the lack of an electronegative atom that can interact with the hydrogen atom to form a polar covalent bond.
For more such questions on Hydrogen bonding , Visit:
https://brainly.com/question/1426421
#SPJ11
Europe and North America are drifting apart from each other at a rate of 0.438 cm every year. How many years are required for the continents to drift 1.00 meter apart?
Answer:
See Below.
Explanation:
Europe and North America are drifting apart at a rate of about 3 cm per year due to continental drift. To find out how many years are required for them to drift 1 meter apart, we can use a simple formula:
Years = Distance / Rate
Plugging in the values, we get:
Years = 100 cm / 3 cm per year
Years = 33.33
Therefore, it would take about 33.33 years for Europe and North America to drift 1 meter apart at the current rate.
I hope this helps!
To find the number of years needed for Europe and North America to drift apart by 1.00 meter, given a drift rate of 0.438 cm per year, we convert the meter into centimeters, and then divide by the rate. The calculation gives approximately 228 years.
Explanation:To determine the number of years required for the continents to drift apart by 1.00 meter, we use the concept of rate, distance and time often used in mathematics.
Given the rate of drifting is 0.438 cm per year, we first convert the 1.00 meter into centimeters as calculations should be in the same units. 1 meter equals 100 cm.
We then divide the total distance by the rate of drift to find the time. So, 100 cm/0.438 cm per year gives approximately 228 years.
Therefore, it would take approximately 228 years for Europe and North America to drift 1.00 meter apart at the current rate.
Learn more about rate calculation here:https://brainly.com/question/16549128
#SPJ2
what would the equilibrium concentration of hf be if 1.50 mol of hf is removed from the equilibrium mixture in part a?
The equilibrium concentration of HF would be 0.625 mol/L.
When 1.50 mol of HF is removed from the equilibrium mixture, the reaction will proceed to the left in order to regain equilibrium. The equation for this reaction is:
HF(g) ↔ H+(aq) + F−(aq)
Since the equilibrium constant, Kc, is constant, the ratio of the product and reactant concentrations remains unchanged.
Therefore, the equilibrium concentrations of HF can be determined by dividing the original equilibrium concentration by the number of moles of HF that have been removed.
The final equilibrium concentration of HF would be 0.625 mol/L (1.50 mol / 2.40 mol).
To know more about equilibrium constant click on below link:
https://brainly.com/question/29802105#
#SPJ11
suppose the 1h nmr spectrum shown below is obtained from a reaction product of a student who wanted to make acetyl ferrocene from ferrocene, what can you say about the product?
Answer: The 1H NMR spectrum shown below is most likely that of the product obtained from a reaction of ferrocene and acetic anhydride.
The spectrum displays a single peak at 6.6 ppm, which is characteristic of a vinyl proton in a substituted cyclopentadienyl ring. The peak at 5.2 ppm is that of a methylene protons in the acyl substituent. The peak at 1.2 ppm is that of a proton attached to a tertiary carbon. This strongly suggests that the student has successfully synthesized acetyl ferrocene.
Acetyl ferrocene is a stable compound, containing a cyclopentadienyl ring with an acyl substituent attached at one of the ring carbons. It is synthesized by reacting ferrocene with acetic anhydride, a reaction that requires heating. The reaction leads to the substitution of a proton in the cyclopentadienyl ring by an acyl group, resulting in acetyl ferrocene.
The 1H NMR spectrum of this product contains a single peak at 6.6 ppm, indicating the presence of a vinyl proton in the cyclopentadienyl ring, a peak at 5.2 ppm, indicating the presence of a methylene protons in the acyl substituent, and a peak at 1.2 ppm, indicating the presence of a proton attached to a tertiary carbon.
Therefore, it can be concluded that the student has successfully synthesized acetyl ferrocene from ferrocene using acetic anhydride.
Learn more about methylene protons here:
https://brainly.com/question/29585359#
#SPJ11
how many ounces of a 35 % solution of sulfuric acid (and distilled water)must be mixed with 20 oz of a 20 % solution to get a 30 % solution of sulfuric acid?
To get a 30% solution of sulfuric acid, 4 oz of a 35% solution of sulfuric acid (and distilled water) must be mixed with 20 oz of a 20% solution of sulfuric acid.
A solution is a homogeneous mixture of two or more substances. For instance, two or more gases, or a gas and a solid, or a liquid and a solid, or two or more liquids could be mixed to create a solution.
First, determine the volume of sulfuric acid in each solution, then combine them to obtain the total amount of sulfuric acid. Solve the equation based on the sulfuric acid content in the final solution.
The volume of sulfuric acid in 35% solution is:
35% = 35/100
= 0.35
V1 = volume of 35% solution of sulfuric acid and distilled water
V1 = 0.35 x V1
Suppose V2 is the volume of 20% solution of sulfuric acid, then
20% = 20/100
= 0.2
V2 = volume of 20% solution of sulfuric acid
V2 = 0.2 x 20 oz
= 4 oz
Let's combine the two solutions.
Total volume is (V1 + V2) ounces,
and the amount of sulfuric acid is 0.35V1 + 0.2V2 ounces.
The volume of sulfuric acid in the final mixture is:
30% = 30/100
= 0.3
V1 + V2 = total volume
0.35V1 + 0.2V2 = total sulfuric acid volume
(0.3 x (V1 + V2)) = 0.35V1 + 0.2V2
V1 + V2 = 40
V1 = 4 oz
Substitute the value of V1 in the equation
V1 + V2 = 40(4 oz) + V2
= 40 V2
= 36 oz
To solve this problem, we can use the concept of the concentration of a solution, which is given by the amount of solute (in this case sulfuric acid) divided by the total amount of solution (sulfuric acid and water) multiplied by 100.
Or
Let x be the number of ounces of the 35% solution of sulfuric acid needed to make a 30% solution. We know that we have 20 ounces of a 20% solution. We can set up an equation based on the concentration of the sulfuric acid in the two solutions:
(0.35x + 0.20(20)) / (x + 20) = 0.30
Simplifying this equation, we get:
0.35x + 4 = 0.30x + 6
0.05x = 2
x = 40
Therefore, we need 40 ounces of the 35% solution of sulfuric acid to mix with the 20 ounces of the 20% solution to obtain a 30% solution.
4 oz of a 35% solution of sulfuric acid (and distilled water) must be mixed with 20 oz of a 20% solution of sulfuric acid to get a 30 % solution of sulfuric acid.Learn more about sulfuric acid: https://brainly.com/question/10220770
#SPJ11
is it possible to determine the amount of energy released in a in a combustion reaction, the energy released as the products form is
The negative value of the heat of reaction indicates that the combustion of methane is an exothermic reaction, and 890.3 kJ of heat are released per mole of methane burned.
Is it possible to determine the amount of energy released in combustion reaction?Yes, it is possible to determine the amount of energy released in a combustion reaction. Energy released as the products form is called the heat of reaction or enthalpy change (ΔHrxn) and can be calculated using balanced chemical equation and the standard enthalpies of formation (ΔHf) of reactants and products.
The standard enthalpy of formation of an element in its standard state is defined as zero.
ΔHrxn = ΣnΔHf(products) - ΣmΔHf(reactants)
ΔHf(products) is the standard enthalpy of formation of each product, n is the stoichiometric coefficient of each product, ΔHf(reactants) is standard enthalpy of formation of each reactant, and m is the stoichiometric coefficient of each reactant.
CH4(g) + 2O2(g) → CO2(g) + 2H2O(g)
The standard enthalpies of formation of methane, oxygen, carbon dioxide, and water are -74.8 kJ/mol, 0 kJ/mol, -393.5 kJ/mol, and -285.8 kJ/mol, respectively.
ΔHrxn = [ΔHf(CO2) + 2ΔHf(H2O)] - [ΔHf(CH4) + 2ΔHf(O2)]
= [(-393.5 kJ/mol) + 2(-285.8 kJ/mol)] - [(-74.8 kJ/mol) + 2(0 kJ/mol)]
= -890.3 kJ/mol
To know more about combustion reaction, refer
https://brainly.com/question/13251946
#SPJ1
How would you interpret that all four C-H bonds of methane are identical?
The four C-H bonds of methane are identical because all of these are formed by the overlapping of the same type of orbital's i.e; hybrid orbital's of carbon and s-orbital of hydrogen.
0.1mol of a substance has a mass of 4g. Calculate the mass of 1 mol
Answer:
The mass of 1 mole of substance is 40 g
Molar Mass is defined as the mass in grams of one mole of a substance. The units of molar mass are grams per mole (g/mol).
This can be found by dividing the mass present by the number of moles. Mathematically, the units: grams ÷ moles = g/mol.
Hence, Molar mass (M) = mass (m) ÷ moles (n).
Therefore, M = m/n = 4/0.1 = 40 g/mol
PLSSS HELP STUCK ON THIS LAB REPORT AND 39PTS I REALLY DON'T DO QUESTIONS BECAUSE IT TAKES AWAY MY PTS BUT THIS NEEDS HELP (Also due before 4:00 pm)
To familiarize students with experimental tools, the scientific method, and data analysis techniques so that they can understand the inductive process that led to the concepts.
What is the experimental summary in Section I?Give a complete sentence description of each stage of the process. It also offers possible explanations (your hypothesis(es)) for what you anticipated the experiment to show. There should be one to three paragraphs in this part.
What significance does experimental study have?Before moving the study into clinical trials, experimental research enables you to test your hypothesis in a controlled setting. Additionally, it offers the best way to test your hypothesis due to the following benefits.
To know more about scientific method visit:-
https://brainly.com/question/26694164
#SPJ1
after pressing a heat treatment operation performed on the compact to bond metallic particles is know as:
Answer: The heat treatment operation performed on the compact to bond metallic particles is known as sintering.
What is sintering?
Sintering is a heat treatment process in which particles of a material are compressed into a strong mass, typically by heat but sometimes by pressure or other means. This process is mostly used for manufacturing ceramics, metals, and plastics.
The goal of sintering is to make a material more durable and compact, and it can be done in several ways.In general, sintering is used to manufacture components that are strong, resistant to wear and tear, and have high heat resistance.
Because sintering involves the use of heat, it can be used to remove defects from materials and create components with high dimensional accuracy.
In addition, sintering can be used to produce a wide range of shapes and sizes, making it a versatile manufacturing technique.
Learn more about sintering here:
https://brainly.com/question/30906950#
#SPJ11
observing the formation of a silver mirror on the surface of a test tube when using tollen's reagent indicates the presence of:
Observing the formation of a silver mirror on the surface of a test tube when using Tollens' reagent indicates the presence of a reducing sugar.
Tollens' reagent is an aqueous solution of silver nitrate, sodium hydroxide, and ammonia used to test for the presence of aldehydes. The test is known as the Tollens' test, and it is based on the fact that aldehydes can be oxidized to carboxylic acids by silver ions.
In the presence of Tollens' reagent, the silver ions are reduced to metallic silver, which forms a silver mirror on the surface of the test tube when they are exposed to a reducing sugar.
Observing the formation of a silver mirror on the surface of a test tube when using Tollens' reagent indicates the presence of reducing sugar.
Reducing sugars are monosaccharides and disaccharides that can donate electrons to other molecules, resulting in their reduction.
Tollens' reagent is an oxidizing agent, and reducing sugars are oxidized by it to carboxylic acids.
As a result, the silver ions in Tollens' reagent are reduced to metallic silver, which forms a silver mirror on the surface of the test tube.
To know more about Tollens' reagent, refer here:
https://brainly.com/question/14356309#
#SPJ11
5. the chemical analysis of a binary hydrate shows that it is composed of 27.76% mn, 35.82% cl and 36.41% h2o. a. what is the formula of the hydrate? b. what is the name of the hydrate?
a. To determine the formula of the binary hydrate, we first need to find the number of moles of each element in the compound. We can assume that the hydrate contains one mole of water, so the percent composition of the anhydrous compound would be:
Mn: (27.76% / 54.94 g/mol) = 0.5057 mol
Cl: (35.82% / 35.45 g/mol) = 1.0096 mol
H2O: (36.41% / 18.02 g/mol) = 2.0228 mol
To find the ratio of the anhydrous compound to water, we need to divide each of these values by the smallest one, which is 0.5057 mol:
Mn: 0.5057 / 0.5057 = 1 mol
Cl: 1.0096 / 0.5057 = 1.996 mol
H2O: 2.0228 / 0.5057 = 4 mol
Therefore, the formula of the hydrate is MnCl2·4H2O.
b. The name of the hydrate can be determined by adding the prefix "tetra" to the name of the anhydrous compound (since there are four moles of water) and adding the word "hydrate" to the end. So the name of this hydrate is tetrahydrate manganese (II) chloride.
To know more about binary hydrate, refer here:
https://brainly.com/question/13564241#
#SPJ11
if you start with 0.045 m of i2 at this temperature, how much will remain after 5.12 s assuming that the iodine atoms do not recombine to form i2 ? g
At 0.045 m of I2 and a given temperature, after 5.12 s of reaction, a certain amount of I2 will remain, the amount of I2 remaining, it is important to consider the rate of reaction of the: iodine atoms.
Assuming that the iodine atoms do not recombine to form I2, we can use the formula:
[tex]m(t) = m(0) x e^(-kt),[/tex]
where m(t) is the mass of I2 remaining after time t, m(0) is the initial mass of I2, k is the rate constant, and t is the time.
Therefore, the mass of I2 remaining after 5.12 s is [tex]0.045 m x e^(-k x 5.12 s).[/tex]
To solve for the rate constant k, we can use the equation
[tex]k = -ln(m(t)/m(0)) / t,[/tex]
where m(t) is the final mass of I2 and m(0) is the initial mass of I2.
Therefore, the rate constant for the reaction is [tex]-ln(m(5.12s)/m(0)) / 5.12s[/tex]. With this rate constant, the amount of I2 remaining after 5.12 s can be calculated by plugging it into the first equation, [tex]m(t) = m(0) x e^(-kt).[/tex]
To know more about iodine atoms refer here:
https://brainly.com/question/14077853#
#SPJ11
what is necessary for extraction? group of answer choices two phases in which the solute is equally soluble higher solute solubility in the second phase lower solute solubility in the second phase two phases in which the solute is equally insoluble
For extraction, there should be an option c) lower solute solubility in the second phase.
Extraction is a process in which a solute is separated from a solution or mixture by two immiscible liquid phases. It involves two phases in which the solute has different solubilities.
In the first phase, the solute has higher solubility, meaning it dissolves more readily.
In the second phase, the solute has lower solubility, meaning it is less likely to dissolve.
In order for extraction to be successful, the solute must be differently soluble in the phases. This ensures that the solute is separated efficiently and effectively.
The process of extraction involves the formation of two liquid phases and the transfer of the solute from one phase to the other. The solute is transferred from the first phase to the second phase, where it is separated from the solution.
To summarize, extraction is a process of separating a solute from a solution or mixture by two immiscible liquid phases. It involves two phases in which the solute has different solubilities.
Therefore, for extraction, it is necessary for the solute to have a lower solubility in the second phase. and hence the correct answer is option c.
To know more about extraction, refer here:
https://brainly.com/question/12910778#
#SPJ11
What conversion factor is used to convert from moles of substance A to moles of substance B?
A.) molar mass; go to #7
B.) Avogadro's number; go to #1
C.) mole ratio; go to #6
D.) the mass of 1 mole; go to #4
Please help!! Been struggling
Mole ratio is the conversion factor used to convert from moles of substance A to moles of substance B (option C).
What is mole ratio?Mole ratio is a ratio of the number of moles of one substance to the number of moles of another substance in a balanced chemical equation.
It allows us to convert between moles of different substances involved in a chemical reaction. Molar mass (A), Avogadro's number (B), and the mass of 1 mole (D) can be used to convert between moles and other units, such as mass and number of particles.
Learn about Mole ratio here https://brainly.com/question/30632038
#SPJ1
g which solution (high salt concentration or low salt concentration) should observe the greatest total amount of water uptake when steady state is achieved?
The solution high salt concentration should observe the greatest total amount of water uptake when steady state is achieved
Osmosis is refers to the movement of water from areas of high concentration to areas of low concentration across a semi-permeable membrane. When the concentration of solutes in two solutions on opposite sides of the membrane is unequal, water will move from the side with the lower solute concentration to the side with the higher solute concentration in an attempt to equalize the concentration of solutes on both sides. This movement of water will continue until the concentration of solutes is equal on both sides. When steady state is achieved, the rate of water movement from one solution to another becomes equal.
As a result, a solution with a higher salt concentration will have a greater total amount of water uptake when steady state is achieved. Because more water is needed on the side with higher solute concentration to make the concentration equal, the solution with a higher solute concentration will absorb more water until equilibrium is established.
Learn more about osmosis at:
https://brainly.com/question/31028904
#SPJ11
Atmospheric pressure on the peak of Mt. Everest can be as low as 150 mm Hg, which is why climbers
need to bring oxygen tanks for the last part of the climb. If the climbers carry 10.0 liter tanks with an
internal gas pressure of 3.04 x 10¹ mm Hg, what will be the volume of the gas when it is released from the
tanks?
Answer: The volume of gas released from the tank at the peak of Mt. Everest is 37.83 liters.
Explanation: To solve this problem, we can use the general gas law equation:
PV = nRT
where P is pressure, V is volume, n is the number of moles of gas, R is the gas constant, and T is temperature (in Kelvin).
We can rearrange this equation to solve for volume:
V = nRT/P
We are given the internal gas pressure of the tank (P) and the volume of the tank (10.0 L). We need to find the volume of gas released from the tank (V). We also know that the temperature and number of moles of gas are constant (assuming no leaks or temperature changes during the climb).
To find the volume of gas released at the peak of Mt. Everest (150 mm Hg), we can use the following steps:
Convert the internal gas pressure of the tank to atm:
3.04 x 10¹ mm Hg x (1 atm / 760 mm Hg) = 0.004 atm
Convert the peak pressure to atm:
150 mm Hg x (1 atm / 760 mm Hg) = 0.197 atm
Plug in the known values to the equation:
V = nRT/P
V = nRT / (0.197 atm)
Solve for V:
V = (nRT) / (0.197 atm)
We can assume that the number of moles of gas, n, and the temperature, T, are constant. R is also a constant (0.08206 L atm / mol K).
So we can simplify the equation to:
V = constant / P
V = k / 0.197
where k is a constant. We can solve for k by using the initial conditions:
10.0 L = k / 0.004
k = 0.04 L atm
Now we can use this value of k to find the volume of gas released at the peak of Mt. Everest:
V = k / 0.197
V = 0.04 L atm / 0.197
V = 0.203 L
But this is the volume of gas at standard conditions (0°C and 1 atm). We need to correct for the temperature and pressure at the peak. To do this, we can use the following equation:
(P1 V1) / (n1 T1) = (P2 V2) / (n2 T2)
where the subscripts 1 and 2 refer to the initial and final states of the gas.
We can assume that n and V are constant, so this equation simplifies to:
P1 / T1 = P2 / T2
We can solve for T2:
T2 = (P2 T1) / P1
T1 is the initial temperature of the gas (room temperature, about 20°C or 293 K). P1 is the initial pressure of the gas (0.004 atm). P2 is the final pressure of the gas (0.197 atm).
T2 = (0.197 atm x 293 K) / 0.004 atm
T2 = 14,502 K
This temperature is obviously not physically realistic, but it shows that the volume of gas is greatly affected by the low pressure and temperature at the peak of Mt. Everest. To correct for this, we can assume that the gas behaves ideally and use the ideal gas law equation:
PV = nRT
We can solve for V:
V = (P2 V1 T1) / (P1 T2)
V = (0.197 atm x 10.0 L x 293 K) / (0.004 atm x 14,502 K)
V = 37.83 L
So the volume of gas released from the tank at the peak of Mt. Everest is about 38 liters.
Hope this helps, and have a great day!
A tree bears 73 individual pieces of fruit each year. Suppose you own an orchard tht contains 120 of these trees.
a. How much fruit will the orchard produce each year?
b. The upkeep and care of the orchard costs you $850 a year. At what prices will you have to sell each piece of fruit just to break even?
The orchard will produce 8760 individual pieces of fruit each year.
What is break even ?
Break even refers to the point at which the total cost of producing a product or providing a service is equal to the total revenue generated from selling that product or service. At the break-even point, there is no profit or loss, and the business is said to be "breaking even."
In other words, the break-even point is the level of sales at which the business is earning enough revenue to cover all its costs, including fixed costs (e.g., rent, salaries) and variable costs (e.g., cost of goods sold, marketing expenses). Beyond this point, any additional sales or revenue will generate a profit for the business.
a. To calculate how much fruit the orchard will produce each year, we need to multiply the number of trees by the number of fruits each tree bears:
Total number of fruit = 120 trees × 73 fruit/tree
Total number of fruit = 8760
Therefore, the orchard will produce 8760 individual pieces of fruit each year.
b. To calculate the price at which you need to sell each piece of fruit to break even, we need to divide the total cost of upkeep and care by the total number of fruit produced, and then add this to the cost of producing each piece of fruit. This will give us the minimum price at which we need to sell each piece of fruit to cover our costs:
Cost per fruit = (Upkeep cost + Cost of producing each fruit) / Total number of fruit
Since the upkeep and care of the orchard costs $850 per year, and the orchard produces 8760 individual pieces of fruit each year, the cost of upkeep and care per fruit is:
Cost of upkeep and care per fruit = $850 / 8760
Cost of upkeep and care per fruit = $0.097
Therefore, the minimum price at which we need to sell each piece of fruit to cover our costs is:
Minimum price per fruit = Cost per fruit + Cost of upkeep and care per fruit
Minimum price per fruit = Cost of producing each fruit + $0.097
Without information about the cost of producing each piece of fruit, we cannot calculate the minimum price required to break even.
To know more about Trees visit :-
https://brainly.com/question/2189834
#SPJ1
.
which compound in each pair below would you expect to have a greater fluorescence quantum yield? explain
The compound O,O'-dihydoxyazobenzene, have a greater fluorescence quantum yield because of the rigidity provided by the -N=N- group. Option D is correct.
Fluorescence quantum yield is a measure of the efficiency of a molecule to emit fluorescence, which is dependent on various factors, including the rigidity or flexibility of the molecule and the presence of any functional groups that can affect the electronic structure. In the given options, O,O'-dihydoxyazobenzene has a rigid structure due to the presence of the azo group (-N=N-) that is expected to restrict the molecule's vibrational freedom, thereby reducing non-radiative energy loss and enhancing fluorescence.
On the other hand, bis(o-hydroxyphenyl) hydrazine has a flexible structure due to the -NH-NH- group, which can lead to higher non-radiative energy loss, reducing the fluorescence quantum yield. Therefore, O,O'-dihydoxyazobenzene is expected to have a greater fluorescence quantum yield than bis(o-hydroxyphenyl) hydrazine.
Hence, D. O,O'-dihydoxyazobenzene, because of the rigidity provided by the -N=N- group is the correct option.
To know more about Fluorescence here
https://brainly.com/question/14742655
#SPJ4
--The given question is incomplete, the complete question is
"Which compound in each pair below would you expect to have a greater fluorescence quantum yield? A) bis(o-hydroxyphenyl) hydrazine, because of the chemical activity of the two extra H atoms. B) bis(o-hydroxyphenyl) hydrazine, because of the flexibility provided by the -NH -NH - group C) O,O'-dihydoxyazobenzene, because of the chemical activity of the -N=N- group. D) O,O'-dihydoxyazobenzene, because of the rigidity provided by the -N=N- group."--