for which principle of relative age is the grand canyon a clear example?

Dynamic equilibrium can be defined as rate of dissolution = rate of deposition. So, option D is correct.

Once a reversible reaction takes place in chemistry, a dynamic equilibrium is present. There is no net change because substances transition equally between reactants and products. The rate at which reactants and products form ensures that neither of their concentrations change. It is an example of a system that is in a constant state specifically.

An equation's equilibrium can be altered and pulled out of dynamic equilibrium by altering the temperature, pressure, or concentration of a reaction. This is the reason why if you open a Coke can and leave it outside for a while, it will ultimately turn "flat" and no longer have any bubbles. This is due to the fact that the soda can is no longer a closed system and the carbon dioxide is now free to interact with the environment. This throws it out of dynamic equilibrium and lets out carbon dioxide gas until there are no bubbles left.

To know more about Dynamic equilibrium

brainly.com/question/26034510

#SPJ4

The complete question is:

Dynamic equilibrium can be defined as:

A) rate of bubbling > rate of dissolving

B) rate of dissolution > rate of deposition

C) rate of dissolution < rate of deposition

D) rate of dissolution = rate of deposition

The independent variable in this experiment is the temperature of the water. The dependent variable in this experiment is the time it takes for the antacid tablets to dissolve.

The independent variable in this experiment is the temperature of the water. This is the variable that is being manipulated and changed in order to observe its effect on the dependent variable. The dependent variable in this experiment is the time it takes for the antacid tablets to dissolve. This is the variable that is being measured and observed in relation to the independent variable. The change in the independent variable (temperature of the water) will result in a change in the dependent variable (time for the antacid tablets to dissolve).

learn more about antacid tablets here:

brainly.com/question/13803795

#SPJ4

In addition to altering the landform due to weathering, slope processes, and mass movement, fracking causes major lithosphere fissures.

A pressurised liquid is used in fracking, a well stimulation technique, to fracture bedrock strata.

Methane, an extremely powerful greenhouse gas, is released in massive quantities during fracking.

Since 1947, fracking has been carried out safely in the US. Fracking has been used to complete more than 1.7 million U.S. wells, yielding 600 trillion cubic feet of natural gas and more than seven billion barrels of oil.

However, the present fracking boom wasn't really ignited until two significant shifts occurred at the start of the twenty-first century.

Because the fracking fluid that is poured into rock to release gas frequently contains chemicals, improper fracking can damage water supplies.

Fracking has advantages since it boosts income, employment, economic activity, and house prices.

Thus, these are the risks fracking pose to our drinking water resources.

For more details regarding fracking, visit:

https://brainly.com/question/25062302

#SPJ1

Boric acid suppositories dissolve entirely in the  in just a few minutes. While utilising a  suppository, some people choose to

Boric acid suppositories dissolve entirely in the  in just a few minutes. While utilising a  suppository, some people choose to wear a . You can limit the growth of yeast by putting gelatin capsules containing boric acid into your . You might observe improvements in symptoms a few days after beginning medication. In most cases, the infection will go away in 1 to 2 weeks. Inconvenience in the  are among the negative effects of boric acid use. after entering the capsule, there is a slight burning sensation. sluggish  discharge.

Learn more about boric acid here:

https://brainly.com/question/14879930

#SPJ4

The conclusion the student that the colorless liquid that was added to anhydrous copper {ii} sulfate which turned blue is pure water because anhydrous copper {ii} sulfate does not react with pure water.

A sample of anhydrous copper(II) sulfate becomes blue when water is present.

In the absence of water, it is also known as anhydrous copper(II) sulfate and is colorless.

When water molecules are added to anhydrous copper {ii} sulfate, the individual water molecules are held within the ionic lattice surrounding the copper(II) ions, it is still a dry solid resulting in the formation of blue hydrated copper {ii} sulfate.

This reaction does not occur with pure water.

Learn more about anhydrous copper {ii} sulfate at: https://brainly.com/question/24555008

#SPJ1

Metamorphic rocks are made on the Earth's surface. This statement is true.

The majority of mountain ranges on Earth are composed primarily of metamorphic rock. However, metamorphic rocks form deep within the Earth when intense heat and pressure force existing rocks to change their crystalline structure, resulting in the formation of a new type of rock.

Although metamorphic rocks form deep within the Earth's crust, they are frequently exposed on the planet's surface.

Thus, Metamorphic rocks are made on the Earth's surface. This statement is true.

To learn more about the metamorphic rocks, follow the link;

https://brainly.com/question/19930528

#SPJ1

142 neutrons are in the nucleus of theorem-232, which is a radioactive isotope of thorium.

The number of neutrons located in the nucleus of thorium-232 can be calculated using its atomic mass and atomic number. The atomic mass of thorium-232 is 232 and the atomic number is 90. The atomic number represents the number of protons in the nucleus, and since protons and neutrons have the same mass, we can calculate the number of neutrons by subtracting the atomic number from the atomic mass.

232 - 90 = 142

So, there are 142 neutrons located in the nucleus of thorium-232.

You can learn more about thorium-232 at

https://brainly.com/question/11228570

#SPJ4

Option ( v) is correct. The most probable distribution of particles is the one with the largest number of possible microstates.

In an isolated system the entropy of the system is increased to its maximum value. A microstate is a specific way that can arrange the energy of the system. The more microstates the higher the entropy. The greater the number of microstates  the greater the entropy. According to Boltzmann it is difficult to explain the behavior of microstates. In order to get the actual probabilities of a given microstate it is needed to figure out the probability for an individual microstate.  A microstate is defined as a specific microscopic configuration of a thermodynamic system that the system may occupy with a certain probability in the course of its thermal fluctuations.

To learn more about Microstates please visit:

https://brainly.com/question/16693606

#SPJ4

The complete question is,

The most probable distribution of particles is the one with the group of answer choices:

(i) highest enthalpy.

(ii) lowest number of possible microstates.

(iii) most symmetry.

(iv)highest energy.

(v) largest number of possible microstates.

the most probable distribution of particles is the one with the group of  largest number of possible microstates.

A microstate, also known as a ministate, is a sovereign state that often has a very tiny land area as well as a very small population. The terms "state" and "very small," however, are not clearly defined under international law.

The system's entropy rises to its highest level in an isolated system. A microstate is a particular configuration that the system's energy can take. The entropy increases with the number of microstates. The entropy increases with the number of microstates. Boltzmann claims that it is challenging to comprehend the behaviour of microstates. It is necessary to calculate the probability for each individual microstate in order to obtain the real probabilities for a certain microstate. A thermodynamic system may, with a certain probability, occupy a certain microscopic configuration called a microstate during its thermal fluctuations.

For more such questions on microstate, Visit:

brainly.com/question/16693606

#SPJ4

Atomic mass of elements can change. The elements with same atomic number, but have different atomic mass or mass number is called an isotopes.

Atomic number of an element does not change. However variations in their atomic masses can happen. Atomic mass is the sum of protons and neutrons in the nucleus. Number of protons does not change, but number of neutrons can vary and such element occur in nature or can be laboratory made and are called isotopes.

There are 3 isotopes for hydrogen. Protium has an atomic number of 1 mass mass number 1 (meaning only one proton in the nucleus and no neutrons). Deuterium have an atomic number 1 and atomic mass 2 ( 1 proton and 2 neutrons). Tritium with atomic number 1 and atomic mass 3( 1 proton and 2 neutrons).

        ₁H¹                  ₁H²                  ₁H³

 Protium          Deuterium        Tritium

So atomic mass can vary in elements.

For more information regarding Isotopes, kindly refer

https://brainly.com/question/27475737

#SPJ4

The partial pressure of oxygen would be 0.63198 atm or 480.3047 mmHg.

According to Dalton's law of partial pressure, the pressure of a gas consisting of a mixture of gases is the sum of the partial pressure of individual gases in the mixture. This law is mathematically expressed as:

[tex]P_{total[/tex] = [tex]P_1 + P_2 + .....[/tex]

In this case, [tex]P_{total[/tex] = 2 atm, PCO2 = 30.185 mmHg, and PN2 = 1009.525 mmHg

1 mmHg = 0.00131579 atm

30.185 mmHg = 0.03972 atm

1009.525 mmHG = 1.3283 atm

Thus, PO2 = Ptotal - PCO2 - PN2

                   = 2 -  0.03972 - 1.3283

                   = 0.63198 atm

0.63198 atm = 480.3047 mmHg

In other words, the partial pressure of oxygen in the gas mixture would be 0.63198 atm or 480.3047 mmHg.

More on partial pressure can be found here: https://brainly.com/question/13199169

#SPJ1

The mass of the water that is formed by the oxygen is 216 g.

We know that we would have to look at the reaction equation and this would give us an idea on how to be able to use the stoichiometry of the reaction equation so as to solve the problem that we have at hand here.

Then we have;

Equation of the reaction; [tex]2H_{2} +O_{2} --- > 2H_{2}O[/tex]

Number of moles of the oxygen = 192 grams /32 g/mol

= 6 moles

If 1 mole of oxygen forms 2 moles of water

6 moles of oxygen would form = 6 * 2/1

= 12 moles of water

Mass of the water = 12 moles * 18 g/mol

= 216 g

Learn more about stoichiometry:https://brainly.com/question/30215297

#SPJ1

The molality of the solvent does not change as a function of temperature. Molality is a concentration unit that is unaffected by temperature, it is utilised in this project in place of molarity.

Molality, which is determined by the number of moles of solute per kilogram of solvent, is a unit used to describe the concentration of a solute in a solution. It has units of moles per kilogram (mol/kg) and is generally represented by the letter "m".

Since molality is a concentration unit that is unaffected by temperature, it is utilised in this project in place of molarity. The amount of moles of solute per kilogram of solvent is referred to as molality. The molality of the solvent does not change as a function of temperature because the solvent's volume does not. The amount of moles of solute per litre of solution, on the other hand, is referred to as molarity. The molarity fluctuates with temperature in the same way as the solvent's volume does.

In general, the difference between molarity and molality is greater when the concentration of a solution is high. For a solution with the same concentration, molality is almost always greater than molarity.

To know more about molality, visit:

brainly.com/question/26921570

#SPJ4

Answer:

Option A

Explanation:

Activation energy is defined as the minimum amount of extra energy required by a reacting molecule to get converted into product. It can also be described as the minimum amount of energy needed to activate or energize molecules or atoms so that they can undergo a chemical reaction or transformation.

Answer: A. The minimum amount of energy required for a reaction to happen

Explanation:

Activation energy is defined as the minimum amount of extra energy required by a reacting molecule to get converted into product. It can also be described as the minimum amount of energy needed to activate or energize molecules or atoms so that they can undergo a chemical reaction or transformation.

The procedure for preparing 100ml of a 1.5m kbr solution ,

1. Weigh exactly 17.85 g of KBr in a clean and dry 100 mL beaker.

2. Dissolve this salt in a minimum amount of distilled water (approximately 10-20 mL).

3. Transfer this diluted solution in a clean and dry 100 mL volumetric flask.

4. Dilute this solution up to the mark using distilled water.

5. This is 1.5 M KBr solution. Ready for use.

KBr refers to potassium bromide . In reality, potassium bromide (KBr) is a chemical substance. One of the common anticonvulsant medications used to treat canine and feline epilepsy is potassium bromide, sometimes known as KBr. This can be taken on its own or in conjunction with phenobarbital to control seizure activity. The odourless potassium bromide salt is a white crystalline powder, colourless crystals, or a white granular solid with a strong bitter flavour .

For such more questions on KBr - potassium bromide:

brainly.com/question/18248722

#SPJ4

Answer:

As a scientist employed by a manufacturer of cookware, I would recommend using alumina (Al2O3) as the material for a ceramic baking dish.

Answer:

Appearance: Water is a colourless, odourless and tasteless liquid in its natural state. The crystal structure of water is hexagonal.

Density: The density of water is about 1 gm/cc and it varies with temperature in an undefined pattern. In solid state, the density remains close to 0.9gm/cc.

Viscosity: Viscosity is explained by the resistance to deformation at a given rate. In other words, the thickness of the liquid - eg, syrup or water. Viscosity of water is 0.89 cP.

Explanation:

The new concentration of sucrose in the tea is 7.14%.

When a solution is diluted, the number of moles of solute (in this case, sucrose) remains constant, while the number of liters of solvent (in this case, water) increases. Therefore, the concentration of the solute decreases.

To calculate the new concentration, you would divide the number of moles of sucrose by the number of liters of the final solution (700 ml). In this case, the original solution was a 10% solution of sucrose, so it contained:

10/100 × 500 = 50 grams of sucrose.

After dilution with 200 ml of water, the new solution contains:

50/700 × 100% = 7.14%.

Therefore the new concentration is 7.14%

To learn more about sucrose visit: https://brainly.com/question/30313287

#SPJ4

The volume percentage of helium in the sample is 25.06%.

For the volume percentage of helium in the sample of methane gas, we will first need to determine the density of the helium and the density of the methane.

We know that the density of the sample is 0.70902 g/L at 0.08 °C and 1.000 atm and that the sample contains methane (CH4) and helium (He).

The density of methane at 0.08°C and 1.000 atm is 0.717 g/L and the density of Helium is 0.178 g/L at the same temperature and pressure.

To find the volume percentage of helium in the sample, we can use the formula:

% Volume of helium = [tex](\frac{density of helium}{density of sample})[/tex] × 100%

% Volume of helium =  [tex](\frac{0.178}{0.70902} )[/tex] × 100%

% Volume of helium = 25.06%

So, the volume percentage of helium in the sample is 25.06%.

To know more about Density,

https://brainly.com/question/1354972

#SPJ4

Molar mass of (NH4)2SO3 is  116.14 g/mol.(NH4)2SO3 is ammonium sulfite.mass of (NH4)2SO3 is 535.92g

Ammonia and sulphur dioxide in an aqueous solution can react to form ammonium sulfite:

2 NH3 + SO2 + H2O → (NH4)2SO3

mass=no.of moles*molecular weight

molar mass of (NH4)2SO3 =116.14 g/mol

mass=4.62*116

mass=535.92g

Gas scrubbers made of ammonium hydroxide, which are now antiquated, create ammonium sulfite to remove sulphur dioxide from power plant emissions. The Walther Process' foundation is the conversion. Ammonium sulphate can be produced by air oxidising the resultant ammonium sulfite.Sulfite of ammonium is a reducing agent. As it heats up and begins to decompose, it releases sulphur dioxide and nitrogen oxides.

learn more about ammonium sulfite Refer:brainly.com/question/14535501

#SPJ4

In comparison to hydrogen chloride, ammonia diffuses 1.46 times more quickly.

To learn more about ammonia diffuses refer to:

https://brainly.com/question/10401051

#SPJ1

The subscripts are a part of the formulations and once the formulas for the reactants and products have been established, they cannot be changed.

The subscripts are a component of the formulas, and they cannot be modified after the formulas for the reactants and products have been established. The number of each material participating in the reaction is indicated by the coefficients, which can be modified to make the equation more or less balanced.

Although both coefficient and subscript are numerical terms, they provide different information on a particular chemical reaction. Coefficient indicates the number of moles of a material, whereas subscript gives the number of atoms in a molecule, and this is the main distinction between coefficient and subscript.

A smaller-than-usual number, figure, symbol, or indicator that is placed either slightly above (superscript) or below (subscript) the standard line of type is referred to as a superscript or subscript (subscript).

To learn more about coefficients and subscript refer to:

https://brainly.com/question/14425756

#SPJ1

The experiment shows that 3.66 kJ of heat are needed. 0.249 J/g°C or 249 J/kg°C, can the chemist report for the specific heat capacity of the substance.

The specific heat capacity of a substance is the amount of heat required to raise the temperature of a given mass of the substance by a certain amount. It is usually denoted by the symbol "c" and is measured in units of J/g°C or J/kg°C.

To calculate the specific heat capacity of the substance in this case, we can use the following formula:

c = Q / (m x ΔT)

where Q is the heat absorbed (or released) by the substance, m is the mass of the substance, and ΔT is the change in temperature.

In this case, the mass of the substance is 1.71 kg, the change in temperature is (15/9 - 0.5)°C = 14.6°C, and the heat absorbed is 3.66 kJ.

c = 3.66 kJ / (1.71 kg x 14.6°C)

= 0.249 J/g°C or 249 J/kg°C

Therefore, the chemist can report that the specific heat capacity of the substance is 0.249 J/g°C or 249 J/kg°C, rounded to 3 significant digits.

To know more about specific heat please refer: https://brainly.com/question/11297584

#SPJ4

164.22 grams of sodium fluoride are dissolved in 3.75 L of a 1.55 M solution.

To find the number of grams of sodium fluoride (NaF) dissolved in 3.75 L of a 1.55 M solution, you can use the formula:

molarity (M) x volume (L) x molar mass (g/mol) = mass (g)

Sodium fluoride (NaF) has the following molar mass:

22.99 g/mol (Na) + 19.00 g/mol (F) = 41.99 g/mol

So the mass of sodium fluoride dissolved in 3.75 L of a 1.55 M solution is:

mass (g) = 1.55 M x 3.75 L x 41.99 g/mol = 164.22 g

Therefore, 164.22 grams of sodium fluoride are dissolved in 3.75 L of a 1.55 M solution.

Learn more about molar mass here:

https://brainly.com/question/22997914

#SPJ4

Answer:  Chemistry, like physics and biology, is a natural science. In fact, there is considerable overlap between chemistry and these other disciplines. Chemistry is a science that studies matter. This includes atoms, compounds, chemical reactions, and chemical bonds.

Explanation:  Chemistry is the scientific study of the properties and behavior of matter. It is a natural science that covers the elements that make up matter to the compounds made of atoms, molecules, and ions: their composition, structure, properties, behavior, and the changes they undergo during a reaction with other substances.

Chloral hydrate is used as a hypnotic agent. It is metabolized in liver to form trichloroethanol and trichloroacetic acid.. So it is false that chloral hydrate is metabolized as formaldehyde.

Chloral hydrate is readily absorbed after oral administration and metabolized by alcohol dehydrogenase enzyme in liver. It is metabolized as trichloroethanol and trichloroacetic acid.  Trichloroethanol is the metabolite which results in all the pharmacological activity. Which is further metabolized as Trichloroethanol glucoronide and dichloroacetic acid.

Formaldehyde is toxic substance and it is metabolized in liver which has no association with chloral hydrate.

So it is false that chloral hydrate is metabolized to formaldehyde.

For further details regarding Chloral hydrate, kindly refer

https://brainly.com/question/28299451

#SPJ4  

When determining a compound's empirical formula, if your calculated mole amounts are not equal to whole numbers, you must round up or down.

There are a few techniques you can employ to deal with decimal mole ratios between the atoms that make up your compound when you have to determine the empirical formula of the compound from its percent composition.

I won't walk you through the entire process because I'm going to presume you know how to get here. Let's say you have a compound including the elements A, B, and C, and you determine their mole ratios to be

A:2.33

B:1

C:1.67

Using mixed fractions in these circumstances is quite beneficial. A whole number and a regular (or appropriate) fraction are combined to form mixed fractions.

2.33= 2 1/3, or 7/3,

while 1.67 = 1 2/3. This makes the ratios equal to

A:7/3

B:1

C:5/3

Now multiply all of them by 3 to get rid of the denominator and you'll get the empirical formula

A₇B₃C₅

Your question is incomplete but most probably your full question was

When determining a compounds empirical formula if your calculated mole amounts are not equal to whole numbers what must you do?

Learn more about empirical formula at https://brainly.com/question/30137085

#SPJ4

The study of basic properties and behavior of matter is known as chemistry. It is a branch of natural science that studies everything from the atoms, molecules, and ions that make up a compound to the elements that make up matter:their composition,structure,characteristics, behavior, and what happpens when they interact.

Cooking is essentially a chemistry experiment. It's likely that you'll become a better cook if you comprehend the chemical processes involved in raising baked items, neutralizing acidity, or thickening sauces.  Information on petroleum, product recalls, pollution, the environment, and technological advancements.

Your understanding of the world around you is aided by chemistry. Environmental contamination is without a doubt a major issue on a global scale. But how does it impact Earthly life? Basic chemical knowledge is necessary to comprehend how environmental contamination affects both living things and the atmosphere.

Learn more about chemistry here:

https://brainly.com/question/1222323

a group electrons is called electon pair.

Answer:

B. electron pairs.

Explanation:

Complementary angles are two angles whose sum is 90 degrees.

To learn more about angles refer to:

https://brainly.com/question/16281260

#SPJ1

A gas occupies a volume of 14. 5 L at 230 K. Option (C), 17.4 K will the temperature be it the gas expands to 21.8 L.

The relationship between the temperature, volume, and pressure of a gas is described by the ideal gas law, PV = nRT, where P is the pressure, V is the volume. We are given the initial volume and temperature of the gas and we are asked to find the final temperature when the gas expands to a different volume. The ideal gas law is an equation of state of a gas, which describes the relationship between the pressure, volume, and temperature of a gas. We are given V1, T1, and V2. The number of moles and pressure are not given so we can consider them constants.

The equation is :

V1/T1 = V2/T2

T2 = T1(V1/V2)

T2 = 230 K (14.5L / 21.8L) = 17.4 K

So the temperature will be 17.4 K if the gas expands to 21.8L.

Therefore, the correct answer is 17.4 K (Option C).

To know more about gas please refer: https://brainly.com/question/13123721

#SPJ4