fsu statistics students' moms if there were only twenty-two students instead of fifty-two who contributed their moms' heights, what alternative assumption would we have had to make about the population of mom-heights if we wanted to use a one-sample confidence interval procedure (regardless of whether it would be z or t)? we would have had to assume that the population of mom-heights was ...

The probability of a healthy adult having a body temperature greater than 97.60°F is approximately 91%.

To find the probability of a healthy adult having a body temperature greater than 97.60°F, we can use the Z-score formula to standardize the temperature value. The Z-score formula is:
Z = (X - μ) / σ

Where X is the value we are interested in (97.60°F), μ is the mean (98.60°F), and σ is the standard deviation (0.73°F).
Z = (97.60 - 98.60) / 0.73 = -1.37
Now, we can use the Z-score to find the probability. A Z-score of -1.37 corresponds to a percentile of approximately 0.0853, which means there is an 8.53% chance that an adult will have a body temperature lower than 97.60°F. Since we are interested in the probability of a temperature greater than 97.60°F, we need to subtract this value from 1:
1 - 0.0853 = 0.9147
As a whole number percentage, this would be 91%.

Learn more about Z-score formula here:

https://brainly.com/question/9751714

#SPJ11

The probability of getting in the trapezoid or in the triangle is 0.13.

From the given figure,

Sum of parallel sides of a trapezium is 13+8=21 m

Height of trapezium is 4 m.

Here, area of trapezium is 1/2 ×21×4

= 42 square meter

Base of a triangle = 4 m

Height of a triangle = 7 m

Area of a triangle = 1/2 ×4×7

= 14 square meter

Area of a rectangle = Length×Width

= 25×17

= 425 square meter

Probability of getting trapezium = 42/425

Probability of getting triangle = 14/425

Probability of getting in the trapezoid or in the triangle

= 42/425 + 14/425

= 56/425

= 0.13

Therefore, the probability of getting in the trapezoid or in the triangle is 0.13.

To learn more about the probability visit:

https://brainly.com/question/11234923.

#SPJ1

The equations of the graph from the figure are y = 4 and y = -2

From the question, we have the following parameters that can be used in our computation:

The graph

On the graph, we can see that

We have two horizontal lines that pass through the points y = 4 and y = -2

This means that the equations represented on the graph are y = 4 and y = -2

So, we can conclude that none of the options are true from the options

Read more about functions at

https://brainly.com/question/27915724

#SPJ1

The correct answer is: "The second job offer is better by $21,840."

Let's calculate the total value of the second offer after 4 years:

Yearly salary: $63,000

Total gross income after 4 years: $63,000 x 4 = $252,000

For the 401k contributions, the company matches 5% of the employee's salary, so the employee contributes 5% of $63,000 = $3,150 per year, and the company contributes an additional 5% of $63,000 = $3,150 per year.

After 4 years, the total contributions and company matches are:

Employee contributions: $3,150 x 4 = $12,600

Company matches: $3,150 x 4 = $12,600

Total 401k contributions: $12,600 + $12,600 = $25,200

Therefore, the total value of the second offer after 4 years is:

Total value: $252,000 + $25,200 = $277,200

Now, let's compare this to the total value of the first offer, which is given as $255,360.

Therefore, the second job offer is better by:

$277,200 - $255,360 = $21,840

So the correct answer is: "The second job offer is better by $21,840."

Read more about 401k here:

https://brainly.com/question/20475582

#SPJ1

A) True. The source term in a partial differential equation (PDE) represents a forcing function or external input to the system being modeled.

A) True. The source term in a partial differential equation (PDE) represents a forcing function or external input to the system being modeled. In the finite element method (FEM), the PDE is discretized into a set of algebraic equations, and the source term appears in each of these equations.

Specifically, for each algebraic equation resulting from the discretization of the PDE, the source term contributes to the coefficient of the dependent variable on the left-hand side of the equation, and it is taken to the right-hand side of the equation. The resulting coefficient and right-hand side term are then used to construct the corresponding row of the global coefficient matrix and the right-hand side vector, respectively.

Therefore, the source term affects all algebraic equations in the finite element method and is an essential component of the mathematical model. Changing the source term will affect the solution obtained from the ANSYS solver and can result in a different physical behavior of the system being modeled.

Visit to know more about Equations:-

brainly.com/question/2972832

#SPJ11

Here are three sets of variables:

The level of physical activity and heart rate constitute a causal association wherein one's heart rate is directly affected by the exercised performed.

Likewise, the correlation between studying time and grades earned showcases another causal relationship that asserts how higher study hours lead to better academic scores.

Learn more about variables on

https://brainly.com/question/25223322

#SPJ1

Answer: To determine how many more of the shortest paper chains Rico has than the longest paper chains, you need to know how many paper chains he has of each length. Once you know that, you can subtract the number of longest paper chains from the number of shortest paper chains to find the difference.

For example, if Rico has:

- 10 paper chains that are 3 inches long

- 8 paper chains that are 5 inches long

- 6 paper chains that are 7 inches long

Then the shortest paper chains are the ones that are 3 inches long, and the longest paper chains are the ones that are 7 inches long. To find the difference, you can subtract the number of longest paper chains (6) from the number of shortest paper chains (10):

10 - 6 = 4

Therefore, Rico has 4 more of the shortest paper chains than the longest paper chains.

Step-by-step explanation:

The number of square inches which make up half of the cookie cake is approximately 100.48 inches².

Given that,

The diameter of a circular cookie cake is 16 inches.

Cookie cake is circular.

We have to find the area of the half of the cookie cake.

Diameter = 16 inches

Radius = 16/2 = 8 inches

Area of a circular figure = πr²

Total area of the cookie cake = π(8)² = 64π

Area of half the cake = 64π /2 = 32π = 100.48 square inches

Hence the area of half of the cookie cake is 100.48 inches².

Learn more about Area here :

https://brainly.com/question/30307509

#SPJ1

In the scenario where exactly half the time the element x is not in the list and if x is in the list it is equally likely to be in any position.

The average-case performance of the linear search algorithm would be O(n/2), where n is the size of the list.
This is because in the worst case scenario, the algorithm would have to search through the entire list to find the element x, which would take n operations. However, since half the time x is not in the list, the algorithm would only need to search through half the list, on average. Therefore, the average-case performance would be O(n/2).

To analyze the average-case performance of the linear search algorithm, given that exactly half the time the element x is not in the list and if x is in the list it is equally likely to be in any position, please follow these steps:
1. Consider the two scenarios: element x is in the list and element x is not in the list.
2. For the case when x is in the list, as it is equally likely to be in any position, the average number of comparisons required would be (n+1)/2, where n is the total number of elements in the list.
3. For the case when x is not in the list, the linear search algorithm will go through all the elements in the list and make n comparisons before determining that x is not present.
4. To calculate the average-case performance, take into account the probabilities of each scenario. As the element x is not in the list exactly half the time, the probabilities are 0.5 for each scenario.
5. The average-case performance would be the weighted average of the comparisons in both scenarios: 0.5*((n+1)/2) + 0.5*n.
So, the average-case performance of the linear search algorithm in this situation is given by the expression: 0.5*((n+1)/2) + 0.5*n.

Visit here to learn more about algorithm:

brainly.com/question/22984934

#SPJ11

Conditional probability is calculated by multiplying the probability of the preceding event by the updated probability of the succeeding, or conditional, event.

True. The notation P(a | b) represents the conditional probability of event a given that event b has occurred. It is read as "the probability of a given b."

learn about conditional probability,

https://brainly.com/question/10567654

#SPJ11

Answer:  B (4, 8)

Step-by-step explanation:

6x + 3y=48

5x+y= 28

these functions are lines.  "Solving a system of questions" means to find the point where they intersect, where the x's are the same and the y's are the same.

You want to multiply an entire equation to eliminate a variable.

6x + 3y=48

5x+y= 28

6x + 3y=48     multiply the 2nd equation by -3 so you can eliminate the y's

-3(5x+y= 28)   multiply all terms by -3

6x + 3y=48    

-15x-3y= -84       add like terms of the equations  and the y goes away

-9x       = -36        divide both sides by -9 to solve for x

x=4   now substitute back into one of the original equations

5(4)+y=28

20+y28

y=8

x=4,  y=8

(4, 8) is your point where they intersect.

The independent variable in a relationship between two variables is the variable that is used to predict or explain the variation in the other variable.

It is the variable that is manipulated or controlled by the researcher. For example, if we are investigating the relationship between temperature and ice cream sales, temperature would be the independent variable, as we would expect changes in temperature to predict changes in ice cream sales.

On a scatter diagram, the independent variable is typically represented on the horizontal axis (x-axis) and the dependent variable is typically represented on the vertical axis (y-axis). This is because the independent variable is typically plotted along the horizontal axis, with its values placed at regular intervals, and the dependent variable is then plotted along the vertical axis, with its values plotted based on their relationship to the corresponding independent variable values.

To know more about variable,

https://brainly.com/question/2466865

#SPJ11

Sine and cosine have defined amplitudes, while tangent, cosecant, secant, and cotangent do not have defined amplitudes.

The trigonometric functions that have a defined amplitude are sine and cosine. These functions have an amplitude of 1, as their maximum and minimum values lie between -1 and 1. The other functions (tangent, cosecant, secant, and cotangent) do not have a defined amplitude, as their values can approach infinity.

The trigonometric functions in mathematics are real functions that connect the angle of a right-angled triangle to the ratios of its two side lengths. They are also known as circular functions, angle functions, or goniometric functions. They are extensively employed in all fields of geometry-related study, including geodesy, solid mechanics, celestial mechanics, and many others. Since they are some of the most basic periodic functions, Fourier analysis is frequently employed to examine periodic events.

Visit here to learn more about trigonometric functions : https://brainly.com/question/6904750
#SPJ11

Answer:

3 feet

Step-by-step explanation:

Circumference of circle = d · π

Circumference = 3π

Let'solve

3π = d · π

d = 3 feet

So, the diameter is 3 feet.

Answer:

180

Step-by-step explanation:

rotate it 90 degrees 2 times

The probability of randomly selecting a red marble from the jar is 1/4 or 0.25 (25%).

The probability of randomly selecting a red marble from the jar can be calculated by dividing the number of red marbles by the total number of marbles in the jar. In this case, there are 10 red marbles and 30 blue marbles, so the total number of marbles is 40. Therefore, the probability of selecting a red marble is 10/40 or simplified to 1/4. This means that there is a 25% chance of selecting a red marble from the jar at random. The answer to your second question is 10/30, 10/40, 1/10, and 1/40 are all potential answer choices, but the correct answer is 1/4.

A jar contains 10 red marbles and 30 blue marbles, making a total of 40 marbles in the jar. To find the probability of randomly selecting a red marble from the jar, you need to divide the number of red marbles by the total number of marbles.

The probability of selecting a red marble is:

(10 red marbles) / (40 total marbles) = 10/40

Simplify the fraction by dividing both the numerator and the denominator by their greatest common divisor, which is 10:

10/40 = 1/4

So, the probability of randomly selecting a red marble from the jar is 1/4 or 0.25 (25%).

Learn more about probability at: brainly.com/question/30034780

#SPJ11

If exposure to an earlier assessment affects behavior when a participant is assessed a second time, the researcher might suspect that testing effects are the cause.

When a participant's behavior is affected by exposure to an earlier assessment during a second assessment, this is called testing effects. Testing effects are a type of response bias that can occur in research studies where participants are tested multiple times. This phenomenon can lead to changes in the way participants respond to a test, such as increased familiarity with the test items or increased confidence in their ability to perform well.

Testing effects can be particularly problematic in longitudinal studies where participants are assessed repeatedly over time. If testing effects are not accounted for, they can lead to inaccurate conclusions about the true effect of the intervention or treatment being studied.

To minimize testing effects, researchers may use various strategies such as counterbalancing the order of tests, using different versions of the test, or using longer intervals between assessments. These strategies aim to reduce the potential for participants to remember specific test items or become overly familiar with the testing procedure.

To learn more about Testing effects visit: https://brainly.com/question/6791607

#SPJ11

Using the empirical rule, we can estimate that 68% of the boys having height between 65 and 69 inches.

Since the heights of the student body are normally distributed, we can use the empirical rule to estimate the percentage of boys who are between 65 and 69 inches tall.

The empirical rule states that for a normal distribution:

Approximately 68% of the data falls within one standard deviation of the mean.

Approximately 95% of the data falls within two standard deviations of the mean.

Approximately 99.7% of the data falls within three standard deviations of the mean.

Since the mean height is 67 inches and the standard deviation is 2 inches, we can use this information to estimate the percentage of boys who are between 65 and 69 inches tall:

65 inches is 1 standard deviation below the mean (since 67 - 2 = 65).

69 inches is 1 standard deviation above the mean (since 67 + 2 = 69).

Therefore, using the empirical rule, we can estimate that 68% of the boys are between 65 and 69 inches tall.

To learn more on Statistics click:

https://brainly.com/question/30218856

#SPJ1

Sure! Let X be a continuous random variable with PDF (probability density function) 2x, where x is greater than or equal to 0.

This means that the probability of X taking on any particular value is given by the area under the PDF curve for that value. Since the area under a PDF curve represents the probability of X taking on a value within a particular interval, we can say that the probability of X taking on any interval [a,b] is given by the integral of 2x from a to b.

Additionally, since the PDF is a probability density, the total area under the curve must be equal to 1, which means that the integral of 2x from 0 to infinity must equal 1.

Know more about probability here:

https://brainly.com/question/30034780

#SPJ11

The matching of the accounting terms will be:

It should be noted that in accountancy, depreciation is a term that refers to two aspects of the same concept: first, the actual decrease of fair value of an asset, such as the decrease in value of factory equipment each year.

Learn more about depreciation on

https://brainly.com/question/1203926

#SPJ1

The radius of the cylinder is approximately 5.077 inches.

The volume of a cylinder is given by the formula:

V = πr²h

where V is the volume, r is the radius, and h is the height.

Substituting the given values, we get:

81 = πr²(1)

Simplifying this equation, we get:

81 = πr²

Dividing both sides by π and taking the square root, we get:

r = √(81/π)

r ≈ 5.077

Therefore, the radius of the cylinder is approximately 5.077 inches.

To learn more about the cylinder;

https://brainly.com/question/16134180

#SPJ1

The cost of one ounce of peanuts and one ounce of cashews cost are $0.25 for peanuts and $0.45 for cashews

We can represent the cost of the peanut and cashew as

p=cost per ouce of peanuts

c=cost per ounce of cashews

We can represent the mixture according to the question can be expressed as

15p+5c=6

5p+15c=8

Then we can divide the equations with 5

3p + c = 1.2

p + 3c = 1.6

We can multiply first equation by -3 and add to 2nd to eliminate c's

-9p-3c=-3.6

 p + 3c = 1.6

-8p = -2

p= 0.25

Then from   3p + c = 1.2

c = 1.2 - 3(0.25)

=0.45

Therefore, $0.25 for peanuts and $0.45 for cashews

Learn more about cost at:

https://brainly.com/question/4428949

#SPJ1

the relatedness of a son to a maternal aunt in a haplodiploid system is 0.25, or 1/4.

In a haplodiploid system, males develop from unfertilized haploid eggs and are haploid, while females develop from fertilized diploid eggs and are diploid. This means that sons inherit all their genes from their mothers, while daughters inherit half their genes from their fathers and half from their mothers.

To calculate the relatedness of a son to a maternal aunt, we need to consider the genetic relatedness between the son and his mother, and the genetic relatedness between the mother and her sister (the maternal aunt).

The son shares half of his genes with his mother, and his mother shares half of her genes with her sister. Therefore, the son shares one quarter (0.5 x 0.5) of his genes with his maternal aunt.

So, the relatedness of a son to a maternal aunt in a haplodiploid system is 0.25, or 1/4. Therefore, the correct answer is 0.25.

learn about haplodiploid system,

https://brainly.com/question/24108636

#SPJ11

Answer: 20

Step-by-step explanation:

With 2 secants, it's the inside of the secant times the whole secant for one line = same on other side but for other secant

EF(EF+GF)=ED(ED+CD)       EF=18; GF=3+CD; ED=19; CD=CD

18(18+3+CD)=19(19+CD)    substitute and simplify and distribute

18(21+CD)=361+19CD

378+18CD=361+19CD

CD=17

GF=3+CD      substitute

=3+17

=20

Answer:$68.40

Step-by-step explanation:

The point (0, 4) is not a solution of the given system of equations.

The given system of equations,

-x + 4y = 16 [Equation 1]

3x - 4y = -19 [Equation 2]

We have to find the solution of the system of equations.

From [Equation 1],

4y = x + 16 [Equation 3]

From [Equation 2],

3x + 19 = 4y [Equation 4]

From [Equation 3] and [Equation 4],

x + 16 = 3x + 19

2x = -3

x = -3/2

So x = 0 is not possible.

Hence (0, 4) is not a solution.

Learn more about Solutions of Equations here :

https://brainly.com/question/545403

#SPJ1

The teacher could use a hypothesis test for a population mean in the following situation:

The teacher wants to determine if computer-based instruction has a statistically significant effect on the average test scores of students in the class. The teacher can collect a sample of test scores from students who received computer-based instruction and a sample of test scores from students who did not receive computer-based instruction. Then, the teacher can use a hypothesis test for the population mean to compare the mean test scores of the two groups and determine if the difference is statistically significant.

To know more about hypothesis test,

https://brainly.com/question/30588452

#SPJ11

Complete question:

teacher is experimenting with computer-based instruction In which situation could the teacher use a hypothesis test for a ifference in two population means?

O The teacher uses a combination of treditional methods and computer based instruction She asks students # they lked computer based instruction better She wants to determine if the maorty prete the computer-based instruction

O She gives each student a pretest Then she teaches a lesson using a computer program Afterwards, she gives each student a postest The teacher wants to see f the difference in scores willshow an improvement 。

She ran om y d des the class into t goups One gup ecerves computer based instruction The other group recen es tradit na n rete wit t copters Ahe rst eten een student ha to solve a single problem. The teachers wants to compare the proportion of each group who can solve the problem 。She gives each student a pretest he then randomly dvides the class mto two groups.

Ο e group receves compte based i struct . The other go p eceves tradtind rst cto with t computers After instruction each student takes a post test. The teacher compares the improvement in scores (post test minus pretest) in the two groups

Answer:

1/3

Step-by-step explanation:

because if is tripled the size of original

a)he margin error for a 95% confidence interval to estimate the population proportion is 0.0506., b) the 95% confidence interval for the population proportion is approximately (0.337, 0.423).

a) To find the margin error for a 95% confidence interval to estimate the population proportion, we need to use the following formula:

Margin error = z * sqrt(p * (1 - p) / n)

where z is the z-score for the desired confidence level (in this case, 95% confidence level), p is the sample proportion (given as 0.38), and n is the sample size (not given).

To find the sample size, we can use the formula:

n = (z^2 * p * (1 - p)) / (margin error)^2

where z and p are the same as above, and margin error is given as the value we want to find.

Using a z-score of 1.96 for a 95% confidence level, we can plug in the values and solve for the margin error:

Margin error = 1.96 * sqrt(0.38 * (1 - 0.38) / n)

Now we need to find n by solving the second formula:

n = (1.96^2 * 0.38 * (1 - 0.38)) / (margin error)^2

Plugging in the values for margin error and solving for n, we get:

n = 547.896

Rounding up to the nearest integer, we get a sample size of n = 548.

Plugging in this value for n, we can solve for the margin error:

Margin error = 1.96 * sqrt(0.38 * (1 - 0.38) / 548) = 0.0506

Therefore, the margin error for a 95% confidence interval to estimate the population proportion is 0.0506.

b) To find the confidence interval for a 95% confidence level, we can use the formula:

Confidence interval = sample proportion +/- margin error

where sample proportion is the given value of p (0.38), and margin error is the value we just calculated (0.0506).

Plugging in the values, we get:

Confidence interval = 0.38 +/- 0.0506

Simplifying, we get:

Confidence interval = (0.3294, 0.4306)

Therefore, the confidence interval for a 95% confidence level is (0.3294, 0.4306). This means that we can be 95% confident that the true population proportion falls within this range.
Hello! I'd be happy to help with your question.

a) To find the margin of error for a 95% confidence interval when estimating the population proportion, you'll need the following formula:

Margin of error = z * √(p * (1 - p) / n)

Where:
z = 1.96 (for a 95% confidence interval)
p = 0.38 (given proportion)
n = 500 (sample size)

Now, let's plug in the values and calculate the margin of error:

Margin of error = 1.96 * √(0.38 * (1 - 0.38) / 500)
Margin of error = 1.96 * √(0.38 * 0.62 / 500)
Margin of error = 1.96 * √(0.0004768)
Margin of error ≈ 0.043

So, the margin of error for the 95% confidence interval is approximately 0.043 or 4.3%.

b) To find the 95% confidence interval for the population proportion, use the following formula:

Confidence interval = p ± margin of error

Using the proportion (p) and margin of error calculated in part a:

Confidence interval = 0.38 ± 0.043

Lower limit = 0.38 - 0.043 = 0.337
Upper limit = 0.38 + 0.043 = 0.423

So, the 95% confidence interval for the population proportion is approximately (0.337, 0.423).

Learn more about confidence interval at: brainly.com/question/24131141

#SPJ11