given the sequence 2,8,14,20,26 what is the common difference

Answer: its-134

Step-by-step explanation:

first you find both of the numbers then subtract the answers to both

The length l meter of the cylinder will be 80 meters on rounding to the nearest whole number.

The volume of cylinder is given by the formula -

Volume = πr²h, where r refers to the radius of the base of cylinder and h is the height of the cylinder. Now, keep the values in formula to find the height or length of the cylinder.

156000 = π× 25² × l

l = 156000/(π × 25 × 25)

Rewriting the equation and performing multiplication

l = 79.45 meters

Rounding to the nearest whole number, the length will be 80 meters.

Hence, the length of the cylinder is 80 meters.

Learn more about cylinder -

https://brainly.com/question/23935577

#SPJ1

The complete question is attached in figure.

A confounding variable is a variable that is related to both the independent variable (hours of revision) and the dependent variable (performance in a college-level Spanish language exam).

In this study, potential confounding variables could include the students' prior knowledge of Spanish, their natural ability in language learning, their level of motivation, their access to study resources, and their level of stress or anxiety. These factors could impact both the amount of time a student spends revising and their performance on the exam, making it difficult to determine if the hours of revision directly caused any changes in exam performance. To control for these confounding variables, researchers may consider randomly assigning students to different revision time groups, measuring these other factors, or using statistical analysis techniques to adjust for these variables.
In your study on the effect of revision hours on college-level Spanish language exam performance among 100 college students, potential confounding variables could include:

1. Prior knowledge of Spanish: Students with previous experience in learning Spanish may perform better than those without, regardless of revision hours.
2. Study habits: The quality of study methods can influence the effectiveness of revision hours.
3. Language aptitude: Some students may naturally possess a higher aptitude for language learning, affecting their exam performance.
4. Instructor quality: The effectiveness of the Spanish language instructor can influence student performance.
5. Sleep and stress levels: Adequate sleep and low stress levels can improve a student's ability to retain information during revision.

To learn more about Instructor visit;

brainly.com/question/14450776

#SPJ11

The solution of the linear equation 3(x - 6) - 8x = 2 + 5*(2x + 1) is x = -5/3

Here we want to solve the equation:

3(x - 6) - 8x = 2 + 5*(2x + 1)

First, simplify both sides:

3x - 18 - 8x = 2 + 10x + 5

-5x - 18 = 10x + 7

Now group like terms:

-18 - 7 = 10x + 5x

-25 = 15x

-25/15 = x

-5/3 = x

That is the solution.,

Learn more about linear equations at.

https://brainly.com/question/1884491

#SPJ1

The pigeonhole principle shows that in any set of six classes, there must be at least two classes that meet on the same day because there are only five weekdays for each class to meet on.

This principle states that if there are more items than the number of spaces available to place them in, at least two items must occupy the same space. In this case, there are six classes and only five weekdays available for each class to meet on. Therefore, at least two classes must meet on the same day.

Correct answer: b. The pigeonhole principle shows that in any set of six classes, there must be at least two classes that meet on the same day because there are only five weekdays for each class to meet on.

Learn more about Pigeonhole Principle here:

https://brainly.com/question/30322724

#SPJ11

The equation in point slope form is y -6 = 3(x + 3)

(x₁, y₁) = (-3, 6)

(x₂, y₂) = (-2, 9)

Slope of the line,

m = (y₂ - y₁)/(x₂ - x₁)

m = (9 - 6)/(-2 - -3)

m = 3

Therefore, the equation in point slope form is given as,

(y - y₁) = m(x - x₁)

y - 6 = 3(x - -3)

y -6 = 3(x + 3)

To learn more about equation in point slope form, click:

https://brainly.com/question/28934380

#SPJ1

Answer: x = 19/9.

Step-by-step explanation:

An equation for which the solution is the speed of this automobile is 200 = 0.5v + v²/51.2.

In Mathematics and Science, stopping distance can be defined as a measure of the distance between the time when a brake is applied by a driver to stop a vehicle that is in motion and the time when the vehicle comes to a complete stop (halt).

Based on the information provided above, the speed of this car is represented by the following equation;

d = vs + v²/64m

Where:

By substituting the given parameters, we have:

200 = 0.5v + v²/64(0.8)

200 = 0.5v + v²/51.2

Read more on stopping distance here: brainly.com/question/2233080

#SPJ1

Once the issue is resolved, the seller can try to create or match the product with an ASIN again.

This error message is related to Amazon's Global Trade Item Number (GTIN) requirements. Amazon requires that sellers provide valid GTINs (such as UPC, EAN, or ISBN) for their products. The error message indicates that the SKU (Stock Keeping Unit) provided by the seller does not match any existing ASIN (Amazon Standard Identification Number) and contains invalid attribute values required for the creation of a new ASIN.

To fix this error, the seller should check that the SKU and attribute values are correct and that the product has a valid GTIN. The seller may need to obtain a valid GTIN for their product or correct any errors in the attribute values. Once the issue is resolved, the seller can try to create or match the product with an ASIN again.

To learn more about again visit:

https://brainly.com/question/27993468

#SPJ11

Step-by-step explanation:

solve for y

x-4y =24

-4y = 24-x

 y = x/4 - 6    slope = 1/4, the coefficient of the x term

a perpendicular line has the negative inverse,  change the sign and flip the fraction upside down to get -4/1 or -4

y=-4x + b.  plug in the point x=-2, y=7 to calculate b the y intercept

7=-4(-2) + b

b = 7-8 =-1

y=-4x -1 is the perpendicular line through (-2,7)

general equation in slope intercept form is y=mx +b.  m=-4,  b=-1

Carl Friedrich Gauss, the "Prince of Mathematicians," made groundbreaking contributions to number theory, geometry, physics, and statistics, leaving a lasting impact on the field of mathematics.

We have,

Carl Friedrich Gauss, known as the "Prince of Mathematicians," made significant contributions to number theory, geometry, physics, and statistics.

He formulated the fundamental theorem of arithmetic, developed concepts in differential geometry such as intrinsic curvature and Gaussian curvature, and formulated Gauss's law for electric fields.

Gauss's work laid the foundation for modern mathematics and his emphasis on rigor and precision influenced subsequent generations of mathematicians.

His legacy as one of the greatest mathematicians of all time is based on his profound theorems, laws, and concepts that continue to shape the field.

Thus,

Carl Friedrich Gauss, the "Prince of Mathematicians," made groundbreaking contributions to number theory, geometry, physics, and statistics, leaving a lasting impact on the field of mathematics.

Learn more about mathematicians here:

https://brainly.com/question/30613629

#SPJ12

The values of the trigonometry are as follows

8. cos x = 9/17

10. sin x = 0.8

12. cos x = 4/5

From trigonometry: cos² x + sin² x = 1

Let the angle be x

8.

cos² x + sin² x = 1

cos² x + (4√13)/17 = 1

cos² x = 1 - (4√13)/17

cos² x = 81 / 289

cos x = √(81 / 289)

cos x = 9/17

10.

sec x = 5/3 and sec x = 1 / cos x, therefore

cos x = 3/5

x = arc cos 3/5

x = 53.1301

sin x = 0.8

12.

sec x = 5/4 and sec x = 1 / cos x, therefore

cos x = 4/5

Learn more about trigonometry at

https://brainly.com/question/24349828

#SPJ1

The statement 6 is not more than z can be written in inequality as,

6 < z and 6 = z.

Given statement is that,

6 is not more than z.

We have to find the correct statement related to this.

6 is not greater than z.

So there are two options for inequalities.

6 can be less than z or 6 can be equal to z.

Hence the correct options are 6 < z and 6 = z.

Learn more about Inequalities here :

https://brainly.com/question/30231190

#SPJ1

The remaining volume of the cone will be 4247 cubic units.

Let's assume that the base of the square pyramid has side lengths, and let's also assume that the height of the pyramid is h. Then, the volume of the pyramid is:

V(Pyramid)= (1/3) x s² x h

Now, let's consider the inscribed cone. Since the cone is inscribed in the pyramid, the base of the cone must lie at the base of the pyramid, and the vertex of the cone must lie at the apex of the pyramid.

Let's assume that the radius of the base of the cone is r, and let's also assume that the height of the cone is also h. Then, the volume of the cone is:

V( cone)= (1/3) x π x r² x h

Since the cone is inscribed in the pyramid, the base of the cone has the same side length as the base of the pyramid. Therefore, the diameter of the base of the cone is equal to the side length of the square pyramid. Since the radius of the cone is half of the diameter, we can write:

r = (1/2) x s

Substituting this into the formula for the volume of the cone, we get:

V(cone) = (1/3) x π x (1/4) x s² x h

= (1/12) x π x s² x h

Now, we can find the volume of the remaining solid by subtracting the volume of the cone from the volume of the pyramid:

V(remaining) = V(pyramid) - V(cone)

= (1/3) x s² * h - (1/12) x π x s² x h

= (1/3) x s² x h x (1 - (1/4) x π)

So, the volume remaining is approximate:

V(remaining) ≈ 0.79 x s² x h

V(remaining) = 0.79 x (16)² x 21

V(remaining) = 4247 cubic unit

To know more about Pyramid and cone volume follow

https://brainly.com/question/12397434

#SPJ1

Answer:

Let c = number of calories.

[tex] \frac{120}{ \frac{3}{4} } = \frac{c}{2} [/tex]

[tex] \frac{3}{4} c = 240[/tex]

[tex]c = 320[/tex]

Ans 960

Step-by-step explanation:

120/3/4 = x/6 Cross multiply: 0.75x = 720 Divide each side of the equation by 0.75 x = 960.

The area of the parallelogram in the middle outlined in purple is 6 square units

From the question, we have the following parameters that can be used in our computation:

So, we have

The area of the parallelogram in the middle is calculated as

Area = base * height

So, we have

Area = (5 - 3) * (6 - 3)

Evaluate

Area = 6

Hence, the area is 6

Read more about area at

https://brainly.com/question/24487155

#SPJ1

A plane intersects a cylinder perpendicular to its bases this cross section can be described as a rectangle. Therefore, the correct answer is option 1).

The cross section of a plane intersecting a cylinder perpendicular to its bases is a rectangle. This is because when a plane intersects a cylinder perpendicularly (at right angles) the cross-section area has the shape of a rectangle. The base of the rectangle is determined by the diameter of the cylinder and the height is determined by the length of the cylinder.

A parabola, triangle, and circle are not possible when the plane intersects the cylinder perpendicularly since their shapes cannot accurately represent the intersection of two geometric shapes.

Therefore, the correct answer is option 1).

Learn more about the cross section here:

https://brainly.com/question/13029309.

#SPJ12

Using a Z-table, the probability of having a z-score less than 9.33 is virtually 1.000, or 100%.

The stand time for commercial jets is a random variable with a mean of 2 minutes and a standard deviation of 3 minutes. Assuming the distribution of times is approximately normal, we can calculate the probability of certain events.

(a) To find the probability that the wait time is less than 30 minutes, we can standardize the value and use a standard normal distribution table (also known as a Z-table).

First, calculate the z-score:
z = (X - μ) / σ
z = (30 - 2) / 3
z = 28 / 3
z ≈ 9.33

This means it is almost certain that the wait time will be less than 30 minutes.

Know more about probability here:

https://brainly.com/question/30034780

#SPJ11

Answer:

d-29.05

Step-by-step explanation:

tan^1(5/9) in the calculator which then gives you 29.05

The constant c that makes f(x,y) a joint pmf for X and Y is c = 1/18.

For f(x,y) to be a joint pmf, it must satisfy the following two conditions:

The sum of f(x,y) over all possible values of x and y must be equal to 1.

f(x,y) must be non-negative for all possible values of x and y.

Let's first find the value of c that satisfies condition 2:

Since Sx=(1,2) and Sy=(1,2,3), the possible values of (x,y) are:

(1,1), (1,2), (1,3), (2,1), (2,2), (2,3)

We need to ensure that f(x,y) is non-negative for all of these possible values. This means that:

c(x+2y) ≥ 0

Since x and y are both non-negative integers, the expression inside the parentheses can never be negative. Therefore, we just need to make sure that c is non-negative. If c is negative, then f(x,y) will be negative for some values of x and y, which violates condition 2.

Now let's find the value of c that satisfies condition 1:

We need to find the sum of f(x,y) over all possible values of x and y, and set it equal to 1:

ΣΣ f(x,y) = 1

Σx=1,2 Σy=1,2,3 c(x+2y) = 1

cΣx=1,2 Σy=1,2,3 (x+2y) = 1

c(1+2+3+2+4+6) = 1

c(18) = 1

c = 1/18

Therefore, the constant c that makes f(x,y) a joint pmf for X and Y is c = 1/18.

To learn more about non-negative integers visit: https://brainly.com/question/16155009

#SPJ11

To find the magnitude of r prime of quantity pi over 3 end quantity, we first need to take the derivative of r of t. r prime of t = a vector with two components, sec^2(t) and 2csc(2t) .Then, we can evaluate r prime of pi/3 using these components: r prime of pi/3 = a vector with two components, sec^2(pi/3) and 2csc(2(pi/3)).
Using the fact that sec^2(pi/3) = 4 and csc(2(pi/3)) = -2sqrt(3)/3, we can simplify the vector to: r prime of pi/3 = a vector with two components, 4 and -4sqrt(3)/3
Now, we can find the magnitude of this vector using the formula:

magnitude of a vector = square root of (sum of squares of its components)

magnitude of r prime of pi/3 = square root of (4^2 + (-4sqrt(3)/3)^2)

= square root of (16 + 16/3)

= square root of (64/3)

= 4/square root of 3

Multiplying this by the given constants (1/3 square root of thirty four, 1/2 square root of nineteen, 2 square root of thirteen over three, 4/3 square root of ten), we get the final answer:

magnitude of r prime of quantity pi over 3 end quantity = (4/square root of 3) * (1/3 square root of thirty four) * (1/2 square root of nineteen) * (2 square root of thirteen over three) * (4/3 square root of ten)

= 16/square root of (3 * 34 * 19 * 13 * 10/9)

= 16/square root of 2,583.49

= 16/50.83

= 0.3147 (rounded to four decimal point)

To find the magnitude of r'(π/3), we need to take the square root of the sum of the squared components:

Magnitude of r'(π/3) = √[sec^4(π/3) + (2*cot(2(π/3))*csc^2(2(π/3)))^2]

Once you evaluate the trigonometric functions at π/3 and simplify the expression, you will have the magnitude of r'(π/3).

To learn more about magnitude : brainly.com/question/25305474

#SPJ11

Boolean expressions are mathematical equations that are used to represent logic in digital circuits.

These expressions are made up of Boolean operators such as AND, OR, and NOT, and are used to determine how digital circuits should behave in response to various inputs.
It is important for Boolean expressions to be minimized in the design of digital circuits for several reasons. First, minimizing these expressions can reduce the complexity of the circuit, making it easier to design and maintain. This is because smaller expressions require fewer components and are less likely to result in errors.
Additionally, minimizing Boolean expressions can improve the efficiency and speed of the circuit. This is because smaller expressions require less processing power to execute, which can reduce the overall time it takes for the circuit to respond to inputs.
Overall, minimizing Boolean expressions is an important part of designing efficient and effective digital circuits. By reducing complexity and improving efficiency, circuits can perform more reliably and efficiently, which is essential for many applications.

To learn more about Boolean, refer:-

https://brainly.com/question/30882492

#SPJ11

To estimate this variance, we can use the formula Var(ß) = MSE(X'X)^(-1) where MSE is the mean squared error obtained from the OLS regression.

If E[e|X] = 0, then we know that the OLS estimator of ß is unbiased.

The variance of e|X is denoted as Var(e|X) and is equal to σ² where σ is the standard deviation of the error term.

The asymptotic variance of the OLS estimator of ß is denoted as Var(ß) and is given by the formula Var(ß) = σ²(X'X)^(-1) where X is the matrix of predictors and (X'X)^(-1) is the inverse of the matrix X'X.

 Alternatively, we can use the residual standard error (RSE) to estimate σ and then use the formula Var(ß) = RSE²(X'X)^(-1).

Know more about variance here:

https://brainly.com/question/14116780

#SPJ11

Checking for approximate normality in the population is essential for constructing a valid confidence interval, particularly when dealing with small sample sizes. This ensures the accuracy and reliability of the interval in estimating the true population parameter.

It's important to check whether the population is approximately normal before constructing a confidence interval because the accuracy and validity of the interval depend on the underlying distribution of the population. Here's a step-by-step explanation:

1. A confidence interval is a range of values within which the true population parameter (e.g., mean or proportion) is likely to fall, with a certain level of confidence (e.g., 95% or 99%).

2. The process of constructing a confidence interval relies on the Central Limit Theorem, which states that, for large sample sizes, the sampling distribution of the sample mean will be approximately normal, regardless of the population distribution.

3. However, for small sample sizes, the distribution of the population needs to be approximately normal in order to obtain an accurate confidence interval. This is because the normality assumption is crucial for the proper interpretation of the interval.

4. If the population is not approximately normal, the confidence interval may not provide a reliable estimate of the true population parameter, leading to incorrect conclusions and potentially invalid results.

Learn more about Central limit theorem here: brainly.com/question/18403552

#SPJ11

Using differentials, we can approximate the quantity sqrt(5.05^2 3.1^2) - sqrt(5^2 3^2) as approximately 0.1555.

To use differentials to approximate the quantity sqrt(5.05^2 3.1^2) - sqrt(5^2 3^2), we need to first find a function z that represents this quantity.

Let z = f(x,y) = sqrt(x^2 y^2) = xy. Then, we have:

z(5.05, 3.1) - z(5, 3) = f(5.05, 3.1) - f(5, 3)

We want to approximate this difference using differentials. To do this, we can use the formula:

Δz ≈ dz = ∂f/∂x dx + ∂f/∂y dy

where Δz is the change in z, dz is the differential of z, ∂f/∂x and ∂f/∂y are the partial derivatives of f with respect to x and y, and dx and dy are small changes in x and y.

Taking partial derivatives of f(x,y) = xy with respect to x and y, we have:

∂f/∂x = y and ∂f/∂y = x

Substituting these into the formula for dz, we get:

dz = y dx + x dy

We can now use this differential to approximate the original quantity as follows:

z(5.05, 3.1) - z(5, 3) ≈ dz = y dx + x dy

Substituting the given values, we have:

z(5.05, 3.1) - z(5, 3) ≈ (3.1)(0.05) + (5.05)(0.01)

Simplifying, we get:

z(5.05, 3.1) - z(5, 3) ≈ 0.1555

Therefore, using differentials, we can approximate the quantity sqrt(5.05^2 3.1^2) - sqrt(5^2 3^2) as approximately 0.1555.

To learn more about derivatives visit:

https://brainly.com/question/23847661

#SPJ11

If "exponential-function" is "5ˣ + 6", then (a) Domain: All real numbers

Range: All real numbers greater than 6.

The "Domain" of an exponential function is all real numbers, since any real number can be raised to a power. The range, depends on the value of the base and any vertical shift that is applied to the function.

In the given function F(x) = 5ˣ + 6, the base is 5 which is greater than 1. Therefore, as x approaches negative infinity, F(x) approaches 6, and as x approaches positive infinity, F(x) grows without bound.

It means that the range of the function is all real-numbers greater than 6.

Therefore, the correct option is (a).

Learn more about Domain and Range here

https://brainly.com/question/27242650

#SPJ1

The given question is incomplete, the complete question is

What are the domain and range of the exponential function below?

F(x) = 5ˣ + 6,

(a) Domain: All real numbers

Range: All real numbers greater than 6

(b) Domain: All real numbers greater than 0

Range: All real numbers greater than 0

(c) Domain: All real numbers greater than 0

Range: All real numbers greater than 6

(d) Domain: All real numbers

Range: All real numbers greater than 0

The area enclosed by the ripple is increasing at a rate of  39.2π ft²/s when the radius is 3 feet. To solve this problem, we need to use the formula for the area of a circle: A = πr^2.

We know that the radius is increasing at a constant rate of 2.8 ft/s, so we can write r = 3 + 2.8t, where t is the time elapsed since the stone was dropped.

We want to find how rapidly the area enclosed by the ripple is increasing, which is the same as finding the derivative of the area with respect to time:

dA/dt = d/dt(πr^2)

Using the chain rule, we can simplify this to:

dA/dt = 2πr(dr/dt)

Now we can substitute in the expression we have for r:

dA/dt = 2π(3 + 2.8t)(2.8)

When the radius is 3 feet, we have:

dA/dt = 2π(3 + 2.8t)(2.8)

dA/dt = 39.2π ft^2/s

So the area enclosed by the ripple is increasing at a rate of 39.2π square feet per second when the radius is 3 feet.

Learn more about radius here:

https://brainly.com/question/24051825

#SPJ11

An expression for the given model can be simplified as -x - 2.

Given a model.

The model consists of 2 times x and 3 times -x.

This can be written as 2x + (3 × -x) = 2x - 3x = -x

It also consists of some 1's and '-1's.

In the first column, there are 3 1's = 3

Next, there are 2 1's and 1 '-1' = 2 + -1 = 1

Next, there are 3 '-1's = -1 + -1 + -1 = -3

Next also = -1 + -1 + -1 = -3

So summing up all these,

Expression is -x + 3 + 1 - 3 - 3 = -x - 2

Hence the required expression is -x - 2.

Learn more about Expressions here :

https://brainly.com/question/13947055

#SPJ1