__________ have the lowest ionization energies of the groups listed
PLZ HELP I'LL AWARD BRAINLIEST

Answer:

Approximately [tex]0.551\; \rm J\cdot kg^{-1} \cdot \left(^\circ\! C \right)^{-1}[/tex].

Explanation:

The specific heat of a material is the amount of energy required to increase unit mass (one gram) of this material by unit temperature (one degree Celsius.)

Calculate the increase in the temperature of this sample:

[tex]\Delta T = (116.9 - 24.3)\; \rm ^\circ\! C= 92.6\; \rm ^\circ\! C[/tex].

The energy that this sample absorbed should be proportional the increase in its temperature (assuming that no phase change is involved.)

It took [tex]2911\; \rm J[/tex] of energy to raise the temperature of this sample by [tex]\Delta T = 92.6\; \rm ^\circ\! C[/tex]. Therefore, raising the temperature of this sample by [tex]1\; \rm ^\circ\! C[/tex] (unit temperature) would take only [tex]\displaystyle \frac{1}{92.6}[/tex] as much energy. That corresponds to approximately [tex]31.436\; \rm J[/tex] of energy.

On the other hand, the energy required to raise the temperature of this material by [tex]1\; \rm ^\circ\! C[/tex] is proportional to the mass of the sample (also assuming no phase change.)

It took approximately [tex]31.436\; \rm J[/tex] of energy to raise the temperature of [tex]57.07\; \rm g[/tex] of this material by [tex]1\; \rm ^\circ C[/tex]. Therefore, it would take only [tex]\displaystyle \frac{1}{57.07}[/tex] as much energy to raise the temperature of [tex]1\; \rm g[/tex] (unit mass) of this material by [tex]1\; \rm ^\circ \! C\![/tex]. That corresponds to approximately [tex]0.551\; \rm J[/tex] of energy.

In other words, it takes approximately [tex]0.551\; \rm J[/tex] to raise [tex]1\; \rm g[/tex] (unit mass) of this material by [tex]1\; \rm ^\circ \! C[/tex]. Therefore, by definition, the specific heat of this material would be approximately [tex]0.551\; \rm J\cdot kg^{-1} \cdot \left(^\circ\! C \right)^{-1}[/tex].

Answer. After cytokinesis is completed at end of meiosis - I two haploid cells are formed.on:

Answer:

C. TWO HAPLOID CELLS ARE FORMED

Explanation:

I TOOK THE EDGUNITY TEST AND I GOT IT CORRECT

Answer:

A. It occupies 22.4 L

Explanation:

STP (Standard Conditions for Temperature and Pressure) = 22.4 L per mole at 1 atm

Avogadro's Law states that 1 mol at 1 atm occupies 22.4 L.

Answer:

K and ba

Explanation:

Answer: K and Ba

Explanation:

Answer:

380

Explanation:

Answer:

1) first order

2) second order

3) zero order

Explanation:

The curve of a first order reaction shows it to be exponential. In fact for a first order reaction, the concentration at a time t is an exponential function;

[A]t= [Ao] e^-kt

Where

[A]t = concentration at time =t

[Ao]= initial concentration

k= rate constant

t= time

For a second order reaction, the rate of reaction is directly proportional to the concentration of reactants.

For zero order reactions, rate of reaction is independent of concentration hence rate = k(rate constant)

The concentration data has been required for the determination of the rate of reaction. Based on the concentration of reactant and product, the rate has been determined.

1. For the first-order reaction, there has been an exponential increase in the rate of the reaction with the increase in the reactant concentration. The rate has been dependent on the concentration of the reactant.

Thus the correct option is A.

2. Irrespective of the first-order kinetic, in the second-order reaction, the rate of reaction has been directly proportional to the concentration of the reactant in the solution.

Thus option B is correct.

3. The zero-order reaction has been independent of the concentration of the reactant. The rate of reaction has been constant with an increase in the reactant concentration.

Thus option C is correct.

For more information about the rate of reaction, refer to the link:

https://brainly.com/question/8592296

Answer:

false you can not get a exact location of electrons from just modern science

Answer:

0.75 moles of CO2

Explanation:

molar mass of CO2⇒ 44.01 g/mol

molar mass Oxygen ⇒ 31.998 g/mol

divide the mass given by molar mass of oxygen  so

48÷31.998= 1.50009376 moles of O

then you use the ration of oxygen to carbon to find the moles of CO2 which is one mole of CO2 for 2 moles of oxygen

1.50009376 moles of O ×[tex]\frac{1}{2}[/tex] = 0.75004688

with sig figs

0.75 moles of CO2

Answer: Potassium Bromide (KBr) The Ionic bond formed between Potassium and Bromine is created through the transfer of electrons from Potassium (metal) to Bromine (nonmetal).

Explanation: this type of structure departs strongly from that expected for ionic bonding and ... whose roots go back to Max Planck's explanation in 1900 of the properties of ... types of interactions between elementary particles (the strong force, the weak force, ...

Answer:

7

Explanation:

Let x represent the number of moles of water in the hydrated salt i.e MgSO₄.xH₂O

The following data were obtained from the question:

Mass of MgSO₄.xH₂O = 1.547 g

Mass of anhydrous MgSO₄ = 0.7554 g

Mole of H₂O = x =?

Next, we shall determine the mass of water, H₂O in the hydrated salt, MgSO₄.xH₂O. This can be obtained as follow:

Mass of MgSO₄.xH₂O = 1.547 g

Mass of anhydrous MgSO₄ = 0.7554 g

Mass of H₂O =?

Mass of H₂O = (Mass of MgSO₄.xH₂O) – (Mass of anhydrous MgSO₄)

Mass of H₂O = 1.547 – 0.7554

Mass of H₂O = 0.7916 g

Finally, we shall determine the value of the x as illustrated below:

Mass of MgSO₄.xH₂O = 1.547 g

Molar mass of MgSO₄.xH₂O = 24 + 32 + (16×4) + x[(2×1) + 16]

= 24 + 32 + 64 + x(2 + 16)

= 120 + 18x

Mass of H₂O = 0.7916 g

Molar mass of xH₂O = 18x

Molar Mass of xH₂O/ Molar mass of MgSO₄.xH₂O = mass of xH₂O /Mass of MgSO₄.xH₂O

18x/ 120 + 18x = 0.7916/1.547

Cross multiply

0.7916 (120 + 18x) = 18x × 1.547

94.992 + 14.2488x = 27.846x

Collect like terms

94.992 = 27.846x – 14.2488x

94.992 = 13.5972x

Divide both side by 13.5972

x = 94.992 / 13.5972

x = 7

Thus, the formula for the hydrated salt, MgSO₄.xH₂O is MgSO₄.7H₂O

Number of moles of water, H₂O in the hydrated salt MgSO₄.7H₂O is 7.

The number of moles of attached water molecules is 7.

Mass of hydrated MgSO4 = 1.547 grams

Mass of anhydrous MgSO4 = 0.7554 grams

Number of moles of hydrated MgSO4 = 1.547 grams/120 + 18x

Number of moles of anhydrous MgSO4 = 0.7554 grams /120

Number of moles of anhydrous salt = Number of moles of hydrated salt

0.7554 grams /120 = 1.547 grams/120 + 18x

0.7554(120 + 18x) = 1.547 × 120

90.6 + 13.6x = 185.6

185.6 - 90.6 /13.6 = x

x = 7

The number of moles of attached water molecules is 7.

Learn more about water molecules:https://brainly.com/question/1195122

Answer:

The Group 2 metals become more reactive towards the water as you go down the Group.

Explanation:

These all react with cold water with increasing vigour to give the metal hydroxide and hydrogen. ... You get less precipitate as you go down the Group because more of the hydroxide dissolves in the water. Summary of the trend in reactivity.

Please mark me brainliest! hope this helped!

God bless!

Answer:

The theoretical yield of CaS is 6.01 g.

Explanation:

The balanced reaction is given as:

[tex]Ca+S\rightarrow CaS[/tex]

The molar mass of Ca and S is 40.08 and 32.065 g/mol respectively.

Number of moles = [tex]\frac{Mass}{Molar Mass}[/tex]

So, 7.19 g of Ca contains [tex](\frac{7.19}{40.08})[/tex] mol of Ca or 0.179 mol of Ca

Also, 2.67 g of S contains [tex](\frac{2.67}{32.065})[/tex] mol of S or 0.0833 mol of S

According to the balanced equation:

1 mol of Ca produces 1 mol of CaS

So, 0.179 mol of Ca produces 0.179 mol of CaS

According to the balanced equation:

1 mol of S produces 1 mol of CaS

So, 0.0833 mol of S produces 0.0833 mol of CaS

As the least number of mol of CaS (product) is produced from S , therefore, S is the limiting reactant.

So, thoretically, 0.0833 mol of CaS is produced.

The molar mass of CaS is 72.143 g/mol.

So, the mass of 0.0833 mol of CaS is [tex](0.0833\times 72.143)[/tex] g or 6.01 g

Hence, the theoretical yield of CaS is 6.01 g.

Answer:

costal erosion

Explanation:

can cause erosion

Answer:

The water piles up with nowhere to go but onto land when it gets to the coast. The rising water, called storm surge, can submerge low-lying areas and towns along the coast. Combined with the crashing waves of the storm, the storm surge can cause demolishing docks, houses, roads, and erode beaches.

Explanation:

Answer:

0.05 g/cm^3.

Explanation:

The volume of the block = 9*2*6 = 108 cm^3.

Density = mass/volume

= 5.4 / 108

= 0.05 g/cm^3.

Answer:

29.8

Explanation:

The formula for volume is mass/ density, so 59/1.98. 29.8 is the answer.

Answer:

Rubidium

Answer: Rubidium is the most reactive metal. Explanation: Metals are the elements that looses electrons and thus, their chemical reactivity will be the tendency to loose electrons.

Explanation:

Answer:

ΔU = −55.45 kJ

Explanation:

From first law of thermodynamics in chemistry, we have;

ΔU = Q + W

where;

ΔU is change in internal energy

Q is the net heat transfer

W is the net work done

We are given;

Q = 74.6 kJ

But Q will be negative since heat is released

Thus;

ΔU = -74.6 kJ + W

We are given;

Constant pressure; P = 35 atm = 35 × 101325 = 3546375 N/m²

Volume before reaction; Vi = 8.2 L = 0.0082 m³

Volume after reaction; V_f = 2.8 L = 0.0028 m³

Now,

W = -P(V_f - V_i)

W = - 3546375(0.0028 - 0.0082)

W = 19.15 KJ

Thus;

ΔU = Q + W

ΔU = -74.6 kJ + 19.15 KJ =

ΔU = −55.45 kJ

Answer:

K loses one electron to CI

Explanation:

The lewis electron dot notation shows only the chemical symbol of the element surrounded by dots to represent the valence electrons.

  We have atom of K with one valence electrons

   Cl with 7 valence electrons

For an electrostatic attraction to occur, both particles must be charged. To do this, one of the species must lose an electron, and the other gains it.

This will make both species attain a stable octet;

   Hence, K will lose 1 electron and Cl will gain the electrons.

Answer:

C: K loses one electron to CI

Explanation:

I took the test and got it correct!!

The heat of vaporization of benzene is required.

The heat of vaporization of benzene is 33009 J/kg.

[tex]T_0[/tex] = Normal boiling point = 80.1+273.15 K

[tex]T_B[/tex] = Boiling point at given pressure = 26.1+273.15 K

[tex]R[/tex] = Gas constant = 8.314 J/mol K

[tex]P[/tex] = Pressure at given [tex]T_B[/tex] = 100 torr

[tex]\Delta H[/tex] = Heat of vaporization

From the Clausius–Clapeyron equation

[tex]\dfrac{1}{T_B}=\dfrac{1}{T_0}-\dfrac{R\ln(\dfrac{P}{P_0})}{\Delta H}\\\Rightarrow \Delta H=\dfrac{R\ln\dfrac{P}{P_0}}{\dfrac{1}{T_0}-\dfrac{1}{T_B}}\\\Rightarrow \Delta H=\dfrac{8.314\times \ln\left(\frac{100}{760}\right)}{\frac{1}{80.1+273.15}-\frac{1}{26.1+273.15}}\\\Rightarrow \Delta H=33008.99\ \text{J/kg}[/tex]

The heat of vaporization of benzene is 33009 J/kg.

Learn more:

https://brainly.com/question/13878485

https://brainly.com/question/1077674

Answer:

A chemical formula tells us the number of atoms of each element that is in a compound. It contains the symbols of the atoms for the elements present in the compound as well as how many there are for each element in the form of subscripts.

Hope this helps! please mark me brainliest!

God bless :)

Answer: The answer is 5.15x10^22

Explanation:

The formula unit present in a teaspoon of salt [tex]NaCl[/tex] having a mass of about 5.0 g is [tex]5.15 \times10^{22}[/tex] formula units.

Molar mass, also known as molecular weight, is the mass of one mole of a substance. It is calculated by summing up the atomic masses of all the atoms in a molecule. The unit of molar mass is grams per mole (g/mol).

Now, to determine the number of formula units in a teaspoon of salt (NaCl), we need to use Avogadro's number and the molar mass of NaCl.

Avogadro's number [tex](N_a)[/tex] is approximately. [tex]6.022 \times10^{23}[/tex] formula units per mole.

The molar mass of [tex]NaCl[/tex] is the sum of the atomic masses of sodium (Na) and chlorine ([tex]Cl[/tex]), which are approximately 22.99 g/mol and 35.45 g/mol, respectively.

To calculate the number of formula units in 5.0 g of [tex]NaCl[/tex], we can follow these steps:

Now, calculate the number of moles of [tex]NaCl[/tex] using its molar mass:

Moles = Mass / Molar mass

Moles = [tex]5.0 g[/tex] / [tex](22.99 g/mol + 35.45 g/mol)[/tex]

Calculate the number of formula units using Avogadro's number:

Formula units = [tex]Moles \times Avogadro's number[/tex]

Let's perform the calculation:

Molar mass of [tex]NaCl[/tex]= [tex]22.99 g/mol + 35.45 g/mol = 58.44 g/mol[/tex]

Moles of [tex]NaCl[/tex] = [tex]5.0 g[/tex] / [tex]58.44 g/mol[/tex] ≈ [tex]0.0856 mol[/tex]

Formula units = [tex]0.0856 mol \times (6.022 \times 10^{23})[/tex] formula units/mol ≈ [tex]5.15 \times10^{22}[/tex]formula units.

Therefore, there are approximately [tex]5.15 \times10^{22}[/tex] formula units in a teaspoon of salt ([tex]NaCl[/tex]) having mass [tex]5.0 g[/tex].

Learn more molar mass about here:

https://brainly.com/question/31545539

#SPJ2

Answer:

Magnesiums atomic number is 12

please give me brainliest!

God bless!

Answer:

1 ➡️ Cells

2 ➡️ Arteries

3 ➡️ Veins

4 ➡️ Heart

Explanation:

The parts of the electric circuit that best correspond to the heart, arteries, veins, and cells have been properly labeled.

The circulatory system involves the transportation of nutrients, oxygen and water by blood to other the parts of the body.

From the electric circuit, we see that arteries transport blood away from the heart to the other cells in the body. The veins actually return the blood back to the heart from the cells. The heart pumps the blood

The electric circuity diagram has the label 1 bulb analogous to cell, label 2 analogous to arteries, label 3 analogous to veins, and label 4 cell analogous to heart.

The electric circuit has been given as the power source and the conducting wires that allows the flow of the current in the circuit.

In the human body, the heart has been transported the oxygenated blood through the arteries to the cell and carried the deoxygenated blood from the cells back to the heart via veins.

In the circuit, the battery has been the source of the power/blood. The current has been carried from the heart to the cell/bulb through the arteries labeled, 2, and transported back to the battery via veins labeled 3.

Learn more about the electric circuits, here:

https://brainly.com/question/21075693

Answer:

3.65 mol O₂

Explanation:

Step 1: RxN

2H₂O₂ → 2H₂O + O₂

Step 2: Define

Given - 7.30 mol H₂O₂

Solve - x mol O₂

Step 3: Stoichiometry

[tex]7.30 \hspace{3} mol \hspace{3} H_2O_2(\frac{1 \hspace{3} mol \hspace{3} O_2}{2 \hspace{3} mol \hspace{3} H_2O_2} )[/tex] = 3.65 mol O₂

Answer:

B

Explanation:

I did the question before and got it right.

Answer:

electron shell is the answer

Answer:

Chemical symbols refer to chemical elements only. They do not necessarily refer to atoms of that element, but also to ions.

Explanation:

Answer:

molar mass of unknown gas = 1.987 g/mol

Explanation:

First, the number of moles of the unknown gas is found

Using the ideal gas equation: PV = nRT

P = 1.00 atm, V = 5.00 L, T = 298.15 K, R = 0.082 L.atm.mol⁻¹K⁻¹

n = PV/RT

n = (1.00 atm * 5.00 L)/(298.15 K *0.082 L.atm.mol⁻¹K⁻¹)

n = 0.2109 moles

Molar mass = mass/ number of moles

molar mass = 0.419 g/ 0.2109 mols

molar mass of unknown gas = 1.987 g/mol

The molar mass of unknown gas by using ideal gas equation = 1.987 g/mol.

This equation gives the relation between pressure, volume, temperature as given below:

[tex]PV = nRT[/tex]

P = 1.00 atm, V = 5.00 L, T = 298.15 K, R = 0.082 L.atm.mol⁻¹K⁻¹

Substitute the above values in the above equation as follows:

n = (1.00 atm * 5.00 L)/(298.15 K *0.082 L.atm.mol⁻¹K⁻¹)

n = 0.2109 moles

[tex]Molar mass = mass/ number of moles[/tex]

Calculate molar mass by using the above equation,

molar mass = 0.419 g/ 0.2109 moles

The molar mass of unknown gas = 1.987 g/mol

Find more information about ideal gas equation here,

brainly.com/question/4147359

Answer:

u measure how much power it has

Explanation:

for example u can power a light bulb woth it if u can it was 100eg energy

Answer:

Explanation:

In my opinion the answer should be SO2

Answer:

a should be answer i think.