heeeeeeeeeeeeeeeeeeeeeeeeeeeeeelp

Answer:

D. 5

Explanation:

The coefficient will almost always be the whole number in front of the  variable.

example

5(x)= 7

The coefficient would be 5.

Answer:

They must be selected for a narrow pH range.

Explanation:

Indicators are compounds that change to a specific colour in a solution within a specific pH range.

The chemical indicators does not give the exact value of pH. They only provide the range of pH. They must be selected for a narrow pH range. The correct option is C.

The acid base indicators or neutralization indicators are substances which are employed for the visual detection of the end point on the basis of their ability to change colour during the pH change that occurs in vicinity of the end point.

The chemical indicators are usually weak organic acids or bases which change colour in characteristic pH ranges. The particular range or interval of pH in which an acid-base indicator changes its colour is known as the colour-change interval.

Methyl orange is a weak base which changes its colour in the pH range 3.1-4.4 being red below pH 3.1 and yellow above pH 4.4.

Thus the correct option is C.

To know more about chemical indicators, visit;

https://brainly.com/question/13748767

#SPJ6

Answer:

In order to be able to solve this problem, you will need to know the value of water's specific heat, which is listed as

c=4.18Jg∘C

Now, let's assume that you don't know the equation that allows you to plug in your values and find how much heat would be needed to heat that much water by that many degrees Celsius.

Take a look at the specific heat of water. As you know, a substance's specific heat tells you how much heat is needed in order to increase the temperature of 1 g of that substance by 1∘C.

In water's case, you need to provide 4.18 J of heat per gram of water to increase its temperature by 1∘C.

What if you wanted to increase the temperature of 1 g of water by 2∘C ?

This will account for increasing the temperature of the first gram of the sample by n∘C, of the the second gramby n∘C, of the third gram by n∘C, and so on until you reach m grams of water.

And there you have it. The equation that describes all this will thus be

q=m⋅c⋅ΔT , where

q - heat absorbed

m - the mass of the sample

c - the specific heat of the substance

ΔT - the change in temperature, defined as final temperature minus initial temperature

In your case, you will have

q=100.0g⋅4.18Jg∘C⋅(50.0−25.0)∘C

q=10,450 J

Answer:

There are six liquid elements present in the periodic table. They are bromine,mercury ,caesium,gallium,rubidium and francium.

The metalloids; boron (B), silicon (Si), germanium (Ge), arsenic (As), antimony (Sb), tellurium (Te), polonium (Po) and astatine (At) are the elements found along the step like line between metals and non-metals of the periodic table.

The gaseous element group; hydrogen (H), nitogen (N), oxygen (O), fluorine (F), chlorine (Cl) and noble gases helium (He), neon (Ne), argon (Ar), krypton (Kr), xenon (Xe), radon (Rn) are gases at standard temperature and pressure (STP).

Explanation:

Answer:

A. A. it will shrink.

A. slow down .

Explanation:

Hello there!

In this case, according to the gas laws, it is possible to answer to this questions:

1. Here, it is required to study a volume-temperature relationship by means of the Charles' law which states that the volume decreases as temperature does; for that reason, when dunking  the balloon into the cold water, one can notice A. it will shrink.

2. Here, according to the kinetic molecular theory, which states that higher temperatures provide higher amounts of energy to the molecules to move faster as they gain thermal energy; it is possible to infer that when a sample of gas is cooled, the particles of A. slow down  as they lose thermal energy.

Best regards!

Answer:

Dividing the mass of the water lost by the original mass of hydrate used is equal to the fraction of water in the compound. Multiplying this fraction by 100 gives the percent water in the hydrate.

Explanation:

The amount of water throughout the compound has been determined by dividing the mass of water wasted mostly by original quantity of hydrate used. The above fraction can be multiplied by 100 to get the hydrate's water content in percentages.

The proportion of matter that makes up an object is quantified by its mass. The kilogram, or kg, would be the fundamental SI unit of mass.

Any substance that contains water through the form of H2O molecules is referred to as a hydrate. This water content by weight can vary, but it is typically fixed. The most well-known hydrates seem to be crystalline solids which decompose once the attached water is removed.

Therefore , The amount of water throughout the compound has been determined by dividing the mass of water wasted mostly by original quantity of hydrate used. The above fraction can be multiplied by 100 to get the hydrate's water content in percentages.

To know more about mass and hydrate.

https://brainly.com/question/11202174

#SPJ3

Answer:

for instance when you exercise your muscles increase heat production nudging your body temperature upward.

similarly when you drink a glass of fruit juice your blood glucose goes up

homeostasis depends on that ability of your body to detect and oppose these changes

Answer:

B. burning a piece of wood

Explanation:

The Chemical Would Be The Air Coming From The Wood While Burning It

Tell Me If Im Correct  

Answer:

6 mols H2 are needed

Explanation:

N2 = 28.01g/mol

H2 = 2.02g/mol

[tex]\frac{2 mol N_{2} }{1}[/tex] * [tex]\frac{3 mol H_{2} }{ 1 mol N_{2} }[/tex] = 6 mol H2

Answer:

2,5,4,1,3

Explanation:

Answer:

Ionic Bond

Explanation:

Answer:

Temperature is a measure of the average kinetic energy of the particles in an object. When temperature increases, the motion of these particles also increases. (That should give you the answer if you read closely first sentence)

Explanation:

The answer to the question is (3) K2SO4

Answer:

hwjwjwkwjwnwnnwnw wiwjwjejejejeje

Answer:

C

Hope that helps!

Explanation:

Answer:

C. characteristics that has been passed down or recently learned to help survive its environment

Answer: We live at the bottom of a gaseous envelope the atmosphere--that is bound gravity to the planet Earth. The circulation of our atmosphere is a complex process because of the Earth's rotation and the tilt of its axis. The Earth's axis is inclined 23.5° from the ecliptic, the plane of the Earth's orbit around the Sun. Due to this inclination, vertical rays of the Sun strike 23.5° N. latitude, the Tropic of Cancer, at summer solstice in late June. At winter solstice, the vertical rays strike 23.5° S. Latitude, the Tropic of Capricorn. In the Northern Hemisphere, the summer solstice day has the most daylight hours, and the winter solstice has the fewest daylight hours each year. The tilt of the axis allows differential heating of the Earth's surface, which causes seasonal changes in the global circulation. On a planetary scale, the circulation of air between the hot Equator and the cold North and South Poles creates pressure belts that influence weather. Air warmed by the Sun rises at the Equator, cools as it moves toward the poles, descends as cold air over the poles, and warms again as it moves over the surface of the Earth toward the Equator. This simple pattern of atmospheric convection.

Answer:

A: 0.67

The situation described in the question is analogous to a semipermeable membrane. Water is able to pass through aquaporin channels present in the liposome, but large uncharged particles (glucose) and ions (K+ and Cl -) are impermeable and will remain trapped within the liposome. If assumed to be ideal, the osmotic pressure, π, exerted by the solution due to molarity differences across the membrane is defined as π = iMRT, where i is the van't Hoff factor, M is the molarity of the solution, R is the universal gas constant, and T is the absolute temperature of the solution. A change in osmotic pressure at constant temperature is due to changes in iM, a term that is equivalent to the concentration of dissolved particles produced by solute in solution. When compared to the original volume of 1 M glucose, the new combined solution has twice the volume and three times the number of dissolved particles (1 M KCl, a strongly electrolytic solution, produces 1 M concentrations of both K+ and Cl- in solution), or an increase in the concentration of dissolved particles by a factor of 1.5. This is equivalent to a combined molarity of dissolved particles of 1.5 M. The ratio of osmotic pressure is then [1 M dissolved glucose] / [1.5 M dissolved glucose + KCl] = 0.67

Explanation:

The correct formula of the precipitate that is formed is  Na₂SO₄ + Ni(OH)₂.

The solid substance, that is present at the bottom of the liquid, is insoluble in liquid.

The precipitate formed in reacting the nickel sulfate and sodium hydroxide is sodium sulfate and nickel hydroxide.

The formation of precipitate caused by the compound is called precipitant.

Thus, the correct formula for precipitate is Na₂SO₄ + Ni(OH)₂.

Learn more about a precipitate

https://brainly.com/question/18109776

air

because air is compound discoverd in 1992

Answer:

Ignore all friction

Answer:

182 g NaOH

Explanation:

NaOH= (0.400)(454g)

Answer:

360g

Explanation:

Hope it helps you!

Answer:

9 moles

Explanation:

The balanced chemical equation for this decomposition reaction is as follows:

2KCIO3 → 2KCI+ 302

Based on this equation, 2 moles of potassium chlorate (KCIO3) decomposes to form 3 moles of oxygen gas (O2).

Hence, 6 moles of pottasium chlorate will decompose to produce;

6 × 3 ÷ 2

= 18 ÷ 2

= 9 moles of O2.

Answer:

i don't know

Explanation:

[tex]\huge\tt \blue{❥Answer}[/tex]

Photosynthesis converts carbon dioxide gas to organic carbon, while respiration cycles the organic carbon back into carbon dioxide gas.

______________________________

~ ʜᴀᴘᴘʏ ʟᴇᴀʀɴɪɴɢ ~

Answer:

The concentration is 0.2 M HCI / 15mL 62g

Explanation:

----->

Explanation:

Crystallography. an arrangement in space of isolated points (lattice points ) in a regular pattern, showing the positions of atoms, molecules, or ions in the structure of a crystal.

If an atom experiences sufficient thermal activation, it can move to a neighboring lattice position.4 If the vibration frequency of the atom is v and the atom has Z nearest neighbors, the total number of jump attempts is vZ. However, only a small fraction of the attempts will be successful, with a probability depending on the ratio between the necessary activation energy for a single jump QD and the thermal activation kBT. The effective jump frequency ΓD is then

(5.6)

With each successful jump, the atom travels one atomic distance λ and the total traveling distance in unit time is thus ΓDλ. Substituting the jump frequency ΓD into the expression for the root mean square displacement of a random walker [equation (5.5)] and using the spatial coordinate r leads to

kdjsbjsof in bwjfiejwnjfifihdhwhbsd