Answer: closed system
Explanation:
How much water must be added to 40.0 g of CaCl2 to produce a solution that is 35.0 wt% CaCl2?
The mass of water present in the solution is 21.5 g.
What is concentration?Concentration refers to the amount of solute in a solution. There are various ways of expressing concentration such as;
Molar concentrationMass concentrationPercentage concentrationWe have the following information;
Percent concentration = 35.0 %
mass of solute = 40.0 g
Mass of water = ?
So;
35 = x/40 + x × 100/1
35 = 100x/40 + x
35(40 + x) = 100x
1400 + 35x = 100x
1400 = 100x - 35x
1400 = 65x
x = 1400/65
x = 21.5 g
Hence the mass of water is 21.5 g.
Learn more about percent concentration: https://brainly.com/question/1600559
Argon has a pressure of 34.6 atm. It is transferred to a new tank with a volume of 456 L and pressure of 2.94 atm. What was the volume of the original container?
Answer:
38.75 L
Explanation:
From the question,
Applying Boyles Law,
PV = P'V'....................... Equation 1
Where P = Original pressure of the Argon gas, V = Original Volume of Argon gas, P' = Final pressure of Argon gas, V' = Final Volume of Argon gas.
make V the subject of the equation
V = P'V'/P.................... Equation 2
Given: P = 34.6 atm, V' = 456 L, P' = 2.94 atm.
Substitute these values into equation 2
V = (456×2.94)/34.6
V = 38.75 L
A student adds 5400.0mL of 0.15M NaOH to 201.2mL of 4.0M NaOH. What is the final [NaOH]?
Answer:
0.287 M
Explanation:
Multiply the concentration of each solution by the volume of each (in liters) to get the moles of NaOH in that solution.
0.15 M • 5.4000 L = 0.81 mol NaOH
4.0 M • 0.2012 L = 0.80 mol NaOH
Add the mol of NaOH together to get the total --> 0.81 + 0.80 = 1.61 mol NaOH
Divide by the total volume of solution (5400.0 mL + 201.2 mL = 5,601.2 mL = 5.6012 L)
1.61 mol / 5.6012 L = 0.287 M NaOH
An unknown amount of sodium azide (NaN3) reacts and produces 0.033 moles of nitrogen gas. What mass of sodium metal is produced
Answer:
Mass of sodium metal is 130.87 gram
Explanation:
The complete reaction is
2 NaN3 --> 2 Na + 3 N2
We know that PV = nRT
n = [tex]\frac{PV}{RT}[/tex]
On substituting the given values, we get
[tex]n = \frac{\frac{99707}{101325}*75 }{0.082 *(273.15 +15)} \\n = 3.02[/tex]moles of N2
Sodium azide's molar mass
3.02 *(2/3) = 2.013 moles
Mass = 2.03 * 65.01 = 130.87 gram
Why do you think we use heat to dissolve sodium tetraborate?
Answer:
Explanation:90% of people marry there 7th grade love. since u have read this, u will be told good news tonight. if u don't pass this on nine comments your worst week starts now this isn't fake. apparently if u copy and paste this on ten comments in the next ten minutes you will have the best day of your life tomorrow. you will either get kissed or asked out in the next 53 minutes someone will say i love u this is irrelevent but idrc lol
Name the following alkyne:
CH3CH2C = C - CI
Answer:
The answer was be 1-chloro-1-butyne
Explanation:
In other words the answer is option letter A
You welcome have a nice day.
The name of the given alkyne, CH₃CH₂C = C – CI is 1 chloro 1 butyne.
The correct option is A.
What are alkynes?Alkynes are unsaturated hydrocarbons, that have carbon-carbon triple bonds.
Chlorobutyne is colorless and is liquid at room temperature and pressure.
It is polar, but still slightly soluble in water.
Thus, the correct option is A, 1 chloro 1 butyne.
Learn more about 1 chloro 1 butyne.
https://brainly.com/question/26210366
Metals are considered to be ___________________ because they let electricity flow.
Group of answer choices
conductors
circuits
currents
insulators
Answer:
conductors
Explanation:
Because they consist of lattice of atoms with free electrons and these free electrons allows current to flow through.
Nuclear power:
accounts for half of the energy used in the U.S.
creates less energy than fossil fuels
is a nonrenewable resource
is a renewable resource
Answer:
Is a nonrenewable resource
Explanation:
"The fuel for fusion reactors can be drawn from sea water in an almost unlimited supply. The fuel for fission, on the other hand, comes from a limited supply of uranium. Once it is depleted, it cannot be easily replenished. For this reason, nuclear power is considered a nonrenewable resource."
I got this source from ODY
Hope I could help! :)
Have a nice day
Answer:
is a nonrenewable resource
Explanation:
A gas occupies 10.2 L at 0.986 atm. What is the pressure if the volume increases to 16.0 L?
Answer:
0.629 atm
Explanation:
P1V1 = P2V2
P1 = 0.986 atm
V1 = 10.2 L
P2 = ?
V2 = 16.0 L
Solve for P2 --> P2 = P1V1/V2
P2 = (0.986 atm)(10.2 L) / (16.0 L) = 0.629 atm
The reactant which is consumed completely in a reaction is called the excess reactant. TRUE or FALSE
Answer:
False
Please rate brainliest
4.550 g of Na2SO4 are added to 0.350 L of water. To this solution, 0.085 L of water were added. What is the new concentration of the solution?
Answer:
0.0736 M or 10.4 g/L
Explanation:
First we convert 4.550 g of Na₂SO₄ into moles, using the molar mass of Na₂SO₄:
4.550 g ÷ 142.04 g/mol = 0.0320 molThen we calculate the final volume of the solution:
Final Volume = 0.350 L + 0.085 LFinal Volume = 0.435 LNow we can proceed to calculate the concentration -in molarity- of the solution:
Molarity = moles / liters0.0320 mol / 0.435 L = 0.0736 MIn g/L the concentration would be:
4.550 g / 0.435 L = 10.4 g/LWhat do plants do that requires Energy?
Answer:
Photosynthesis
Explanation:
Photosynthesis uses energy from light to convert water and carbon dioxide molecules into glucose (sugar molecule) and oxygen. The oxygen is released, or “exhaled”, from leaves while the energy contained within glucose molecules is used throughout the plant for growth, flower formation, and fruit development.
How many moles of C6H12O6 does 8.2 x 1023 molecules represent
Answer:
i.e. mass of 1 mole of glucose, C6H12O6 = (6 × 12.01 + 12 × 1.01 + 6 × 16.00) g = 180.18 g (using atomic weight data to 2 decimals) 1 mole of carbon atoms weighs 12.01 g and there are 6 moles of C atoms in 1 mole of glucose, so the mass of carbon in 1 mole of glucose = 6 × 12.01 g = 72.06 g.
Number 12 (c) and (d) please help
Answer:
check below
Explanation:
c) Concentrated sulphuric acid is used a drying agent.
d) (use any one of them) Concentrated phosphoric acid, hot aluminium oxide, calcium chloride , anhydrous calcium sulphate
Answer:
12c) it is used as a drying agent
d) anhydrous calcium chloride
calcium oxide can also be used as a drying agent
Where are skeletal muscles used? Are they voluntary?
PLEASE I NEED HELP ILL GIVE BRAINLYEST
What percentage increase did CO2 experience from 1800 to 2004 AD?
The percentage of CO2 increased 48 percent. Hope this helped!
Why are large crystals of sodium chloride used instead of small
crystals when making ice cream
Answer:
Sodium chloride is added to the ice to lower the freezing point of the ice. Large crystals dissolve more slowly than small crystals. This allows time for the ice cream to freeze more evenly.
Explanation:
which action is an example of an organism maintaining homeostatis
Answer:
[tex]\color{Blue}\huge\boxed{Answer} [/tex]
The body regulates those levels in an example of homeostasis. When levels decrease, the parathyroid releases hormones. If calcium levels become too high, the thyroid helps out by fixing calcium in the bones and lowering blood calcium levels. The nervous system helps keep homeostasis in breathing patterns.
Please please please please please please help me a b c or d
Answer:
the answer for this one is the distance the car is driven
What are some things that all plants need to grow?
Answer:
sunlight, water, carbon dioxide, soil, are the basics which you also have phosphorus and nitrogen
The equilibrium constant for the reaction shown below is Kc=0.0091. If the equilibrium concentrations of A and B are 0.031 M and 0.0823 M, respectively, what is the equilibrium concentration of C?
Answer:
[tex][C]=0.0221M[/tex]
Explanation:
Hello there!
In this case, according to the given chemical reaction at equilibrium:
[tex]3A\rightleftharpoons 3B+2C[/tex]
It is possible for us to set up the equilibrium expression as shown below:
[tex]Kc=\frac{[B]^3[C]^2}{[A]^3}[/tex]
Whereas Kc, [A] and [B] are known as 0.0091, 0.031M and 0.0823M and it is required to calculate [C]; thus, we solve for it as follows:
[tex][C]^2=\frac{[A]^3Kc}{B]^3}[/tex]
[tex][C]=\sqrt{\frac{(0.031)^3*0.0091}{(0.0823)^3}}[/tex]
[tex][C]=0.0221M[/tex]
Best regards!
give an example of liquid diffusing into a solid
Answer:
Mecury almagamated zinc
The hammerhead shark can reproduce both sexually and asexually. What characteristic of the offspring would suggest that they were produced
through sexual reproduction? Offspring are-
all the same gender.
genetically diverse.
produced in small number.
produced very slowly.
Answer: I think it is ‘Genetically diverse’
Explanation:
ADD NOTE
QUESTION GUIDE EXIT TES
3. A sample of 0.0400 mol potassium hydroxide, KOH was dissolved in water to yield 20.0 ml of
solution. What is the molarity of the solution?
Answer:
2.00 M KOH
Explanation:
Divide moles by volume and make sure your volume is in LITERS, not mL.
0.0400 mol KOH / 0.0200 L = 2.00 M KOH
A sample of 0.0400 mol potassium hydroxide, KOH was dissolved in water to yield 20.0 ml of solution. The molarity of the solution is 2.00 M KOH.
What is molarity?Molarity is the measure of the concentration of any solute in per unit volume of the solution.
[tex]M = \dfrac{n}{V}[/tex]
Given, the 0.0400 mol potassium hydroxide
20.0 ml volume
Putting the values in the equation
[tex]\dfrac{0.0400 mol }{ 0.0200 ml} = 2 M[/tex]
Thus, the molarity of the solution is 2.00 M KOH.
Learn more about molarity
https://brainly.com/question/2817451
#SPJ2
Study the map. Then use the drawing tool to create a model of how the two air masses look when they interact at front 1.
Answer: Picture
Explanation: I got it right
Answer:
2 and 3 look like a cold front in front of 1.
Explanation:
3 is an occluded front which occurs when a cold air mass devours a warm air mass and then collides with another cold mass. 2 is a warm air mass, and 1 is a cold air mass.
a substance made up of only atoms of one type is called
Answer: chemical element
Explanation: A chemical element is a substance that contains only one type of atom, which is the smallest particle of an element.
Using this illustration, what is the chemical formula? Picture and possible answers are below.
The answer is It is NH3.....
a ceiling fan's blades collect dust faster than other objects in a room. the constant pushing and rubbing against the air provide a cool breeze for the people in the room. what causes the ceiling fan´s blade to collect dust so quickly.
As the blades rotate, they experience frictional forces as they `rub' against the air; this knocks electrons around, causing the blades to build up a net charge. The charged dust particles then stick to the charged areas of the blades. "The leading edge of the blades usually develops the thickest layer of dust.
To solve this we must be knowing each and every concept related to dust. Therefore, frictional forces allow the ceiling fan´s blade to collect dust so quickly.
What is dust?Dust stirred up by automobiles on the road may account for 33% overall air pollution. Deposits of vehicle or commercial exhaust gas, particles through tire and braking wear, dust from paved streets or potholes, plus dust from building sites all contribute to road dust.
As the blades revolve, frictional forces cause them to 'rub' against the air, knocking electrons around and allowing the blades to accumulate a net charge. The electrified dust particles are subsequently attracted to the charged portions of the blades. Typically, the sharp end of the blades creates the heaviest coating of dust.
Therefore, frictional forces allow the ceiling fan´s blade to collect dust so quickly.
To know more about dust, here:
https://brainly.com/question/29761987
#SPJ2
Please help me out ........
Answer:c
Explanation:
The total pressure is distinct from the individual partial pressures of a mixture.
A. True
B. False
Answer:
the answer is true :)