Answer:
1.8 L
Explanation:
According to Avogadro;
1 mole of CH4 contains 6.02 * 10^23 molecules of CH4
x moles of CH4 contains 2.50 x 10^22 molecules of CH4
x = 1 * 2.50 x 10^22 molecules/ 6.02 * 10^23 molecules
x = 0.04 moles of CH4
2 moles of H2 yields 1 mole of CH4 gas
x moles of H2 gas yields 0.04 moles of CH4
x = 2 moles * 0.04 moles / 1mole = 0.08 moles of H2
x = 0.08 moles of H2
Since 1 mole of H2 occupies 22.4 L
0.08 moles of H2 occupies 0.08 moles * 22.4 L/ 1 mole
= 1.8 L
What is the correct unit for M1 and M2?
Answer:
M1 and M2 are the masses of two. objects exerting the force on each other, and R is the distance. between their centers.
Explanation:
M1 and M2 are the masses of two. objects exerting the force on each other, and R is the distance. between their centers.
3. How much heat (in joules) is needed to raise the temperature of 355 g of ethanol I
(c = 2.4 J/gºC) by 63°C?
q=mcAT
Answer:
53676 J
Explanation:
m = 355 g
c = 2.4 J/gºC
ΔT = 63°C
q = mcΔT
= (355)(2.4)(63)
= 53676 J
The amount of heat is 53676J to raise the temperature of 355 g of ethanol.
What is temperature?Temperature is a measurement of the amount of energy of the atoms in a system or a physical quantity that expresses hot and cold.
What is heat?Heat is energy that is transmitted through one body to some other due to a temperature differential. When two bodies of different temperatures come together, energy can be transferred (heat flows) from the hotter to the colder.
It can be determined by the formula:
q =mCΔT.
where, q is heat, m is mass , C is and T is temperature.
Calculation of heat is shown below:
It is given that, mass of ethanol = 355 g, c = [tex]2.4 J/g^{0}[/tex] C, ΔT. = [tex]63^{0} C[/tex]
Now, put the values of given data in heat formula:
q =mCΔT
= 355×2.4×63
=53676J.
Therefore, the amount of heat will be 53676J to raise the temperature of 355 g of ethanol
To know more about heat and temperature click here.
https://brainly.com/question/1429452.
#SPJ2
is sodium potassium nitrate exo or endo?
endothermic
Explanation:
I believe it's an endothermic but I'm not all too sure
Answer:
Pottasium nitrate is highly exothermic!However the dissolution of sodium nitrate in water is endothermic. Heat is absorbed during process.
How many moles of hypomanganous acid. H3 MnO4, are contained in 22.912 g?
Answer:
0.188mol
Explanation:
Using the formula;
mole = mass/molar mass
Molar mass of hypomanganous acid. (H3MnO4) = 1(3) + 55 + 16(4)
= 3 + 55 + 64
= 122g/mol
According to this question, there are 22.912g of H3MnO4
mole = 22.912g ÷ 122g/mol
mole = 0.188mol
Research online to find out what the acidity of the rainfall is where you live. If you live in an area which is affected by acid rain, where do you think it is coming from and why?
Write 3-5 paragraphs describing the effects.
If you do not live an area effected by acid rain, choose another city that is effected by acid rain.
Answer & Explanation: Acid rain occurs when sulfur dioxide and nitrogen oxide are released into the air to create a chemical reaction. When the two mix in the air (oxygen), they will get into the water and mix with other pollutants in the air, making acid rain.
Answer:
What is acid rain? Acid rain occurs when sulfur dioxide and nitrogen oxide are released into the air to create a chemical reaction. When the two mix in the air (oxygen), they will get into the water and mix with other pollutants in the air, making acid rain.
What causes acid rain the most? It can be caused by useing nonrenewable resources. Which inclues coal, oil, ect.
What effects can acid rain have? It causes respiratory issues in animals and humans. When acid rain falls down and flows into the rivers and ponds it affects the aquatic ecosystem. It alters the chemical composition of the water, to a form which is actually harmful to the aquatic ecosystem to survive and causes water pollution which can harm our fresh water supply.
How much heat do you need to raise the temperature of 300 g of ethanol from 0°C to 20°C?
Answer:
14.6
Explanation:
I just took the test
The amount of heat to raise the temperature is 14.7J.
How do you calculate the heat needed to raise the temperature?The specific heat capacity of a substance is the quantity of heat needed to raise the temperature of a unit quantity of the substance by one degree. Calling the amount of heat added Q, which will cause a change in temperature ∆T to a weight of substance W, at a specific heat of material Cp, then Q = w x Cp x ∆T
By applying the formula, we get
Q = w x Cp x ∆T
Q = 300 * 2.46 * 20/1000
Q = 14.760J
What is heat?
Heat is energy that is transferred from one body to another as the result of a difference in temperature.
Learn more about the heat here: brainly.com/question/13439286
#SPJ2
Proponer una propuesta de acción contra la degradación del suelo basándose en tres tipos de argumentos de fuentes confiables
Answer:
Cobertura vegetal, mantillo y piedra triturada.
Explicación:
Para evitar la degradación del suelo, debemos plantar una cubierta vegetal perenne que proteja el suelo de la erosión del viento y el agua sujetándolo firmemente con sus raíces. El mantillo también se usa para prevenir la erosión del suelo. En aquellas zonas donde la cobertura vegetal no es posible, tenemos que utilizar piedras trituradas para cubrir el suelo con el fin de evitar el contacto directo con el viento. Entonces, estas acciones pueden prevenir la degradación del suelo y mantener el suelo en su estado original.
how many moles of HCI will react with 18.13g of SrO
Answer:
Explanation:
The balanced chemical equation between
SrO + 2HCl → H2O + SrCl2
What is the function of these organelles?
Answer:
Endoplasmic reticulum, Golgi apparatus, Nucleus, Storage Organelles, and Energy - Producing Organelles.
Explanation:
Hope its right! Mark me as Brainliest if it it right ;)!
Remember, the graph in question 1 is a cooling curve. A substance is
changing from a gas to a liquid to a solid. Which model illustrates the
final phase change in this cooling curve?
A) Image A
B) Image B
C) Image C
D) Image D
How many grams of sodium chloride could be produced from 41.3 L of chlorine gas?
Answer:
The grams of sodium chloride that will be made is 292.5 g. calculation. 2Na + Cl₂ → 2NaCl. step 1: calculate the moles of Na. moles = mass/molar mass. From periodic table the molar mass of Na = 23 g/mol. moles = 115 g/23 g / mol = 5 moles. Step 2 : use the mole ratio to determine the moles of NaCl. Na:NaCl is 2:2 = 1:1 therefore the moles of NaCl is also = 5 moles.
Explanation:
We know sodium is a very active metal and chlorine is also a very reactive non-metal. Usually, metals like to eliminate electrons and non-metals such as halogens like to accept electrons. Sodium readily eliminate its last shell electrons become Na+ cation and chlorine accepts that electron to form Cl-anion.
Which tool was most likely used in a procedure if the lab report shows that 300 mL of water was used?
O a volumetric flask
O a thermometer
a pipette
O a graduated cylinder
Which of the following statements are true about elements and compounds?
A. Elements are made up of compounds.
B. Compounds are made up of elements
C. Elements can be shown with chemical symbols, but compounds cannot.
D. Elements and compounds are the same thing.
Answer:
the answer is b
hope this helps :)
please crown me brainliest!!!!
In a closed chamber, 58 grams of propane gas and 220 grams of oxygen gas are sparked to initiate the combustion reaction shown below. C₃H₈(g) + 5 O₂(g) → 3 CO₂(g) + 4 H₂O(l) What is the limiting reagent in this reaction?
propane
oxygen
water
carbon dioxide
Answer:
C) Propane
Explanation:
It's literally all I know
What is the balanced equation for the reaction of a solution of sodium sulfate is mixed with strontium chloride?
Answer:
NaSO⁴(ads) ,ganadicate
Use the drop-down menus to rank the boiling points of the following hydrocarbons. Use a "1" to indicate
the compound with the lowest boiling point.
Answer:
1. 4
2. 2
3. 3
4. 1
Explanation: just did it on edge 2021
Answer:
one.) 4
two.) 2
three.) 3
four.) 1
Which processes involve nuclear changes?
A. fission and fusion
B. erosion and weathering
C. combustion and oxidation
D. evaporation and condensation
Answer:
Nuclear processes, including fusion, fission, and radioactive decays of unstable nuclei, involve changes in nuclear binding energies.
Explanation:
mark me brainliest please
A jar is filled to the top with water, and a piece of cardboard is slid over the opening so that there is only water in the . If the jar is now turned over, will the cardboard fall off? What will happen if there is any air in the jar?
Answer:
it will all fall unless these is air
Explanation:
Answer:
If you do it carefully enough, a small amount of water will pour out of the glass — that's supposed to happen. But try not to let any air bubbles get into the glass. Finally, slowly remove the hand holding the cardboard in place.
Oxygen has 6 valence electrons. how many hydrogen atoms (who have 1 valence electrons) can bond with it? remember the octet rule.
Answer:
two hydrogen can bonded with oxygen to form H2O
All of the following are empirical formulas except:
C2H3O2
C6H6
CHO2
CH2O
Balance the following chemical equation. Choose the correct coefficients in the balanced equation in order. *
4, 3, 2
2, 4, 2
1, 1, 1
3, 2, 3
Answer: 4,3,2
Explanation:
Explain the process of fermentation.
Answer:
Fermentation, chemical process by which molecules such as glucose are broken down anaerobically. More broadly, fermentation is the foaming that occurs during the manufacture of wine and beer, a process at least 10,000 years old. The frothing results from the evolution of carbon dioxide gas, though this was not recognized until the 17th century.
Explanation:
looked it up-
Answer:
like babies or milk and cheese?
Explanation:
Help help help I will give brainliest
Answer:
its b alkyne
Explanation:
brinliest po plsss
Answer:
Alkyne so its b
what are radioactive tracers used for
Answer:
Radioactive tracers are widely used to diagnose industrial reactors, for instance by measuring the flow rate of liquids, gases and solids.
Explanation:
Radioactive tracers are widely used to diagnose industrial reactors, for instance by measuring the flow rate of liquids, gases and solids. A radioactive tracer is a chemical compound in which one or more atoms have been replaced by a radioisotope.
heres the link for more information
https://www.iaea.org/topics/radiotracers#:~:text=Radioactive%20tracers%20are%20widely%20used,been%20replaced%20by%20a%20radioisotope
.
What two forces act in the nucleus to create a 'nuclear tug-of-war'?
a.
Covalent bond, ionic bond
c.
Van der waals force, dipole
b.
Electrostatic repulsion, strong nuclear force
d.
All of the above
Answer:
Electrostatic repulsion, strong nuclear force
Explanation:
The nucleus consists of protons and neutrons. protons are positively charged while neutrons possess no charge.
Since protons are positively charged, they repel each other strongly (like charges repel). This strong repulsion of like charges makes the nucleus somewhat unstable leading to spontaneous fission of heavy nuclei.
However, an opposing force called nuclear attractive force tends to hold the nucleons together. This attraction occurs when two nucleons are bonded by a particle called a π meson.
Hence, the two forces that act in the nucleus to create a 'nuclear tug-of-war' are electrostatic repulsion and a strong nuclear force.
In the lab you take 50.0 mL of a 40.0 M NaOH solution and then add water to it until it reaches the 500.0 mL mark of the flask. What is the concentration of the new solution?
Answer:
4.00M NaOH
Explanation:
A 50-ml amount of 40.0M NaOH contains
(40.0 mol NaOH/1 L)×(0.0500L) = 2.00 mol NaOH
Adding enough water to make a 500.0 mL NaOH solution, the new concentration of this solution is
2.00 mol NaOH/0.5000 L = 4.00M NaOH
Hydrogen and oxygen combining to form water is an example of a physical change.
what type of reaction takes place when bromine reacts with iron iodide
Answer:
If you pass bromine vapour over hot iron, a similar but slightly less vigorous reaction happens, this time producing iron(III) bromide. Anhydrous iron(III) bromide is usually produced as a reddish-brown solid. Again the iron has been oxidised to an oxidation state of +3.
Explanation:
⚠️⚠️What is kinetic energy ? ⚠️⚠️
Energy of work
Energy of movement
Energy of gravity
Energy of power
⚠️⚠️PLEASE HELP IM BEING TIMED⚠️⚠️⚠️
Answer:
Energy of Movement.
Explanation:
Have a great day!
What molar concentration (molarity) results when 1.28 L of 14.38 M HCl is diluted to 9.45 L of water?
Answer:
1.95 M
Explanation:
Molarity is a measure of the molar concentration of a substance (solution). In relation to the volume, it is calculated using the formula as follows;
C1V1 = C2V2
Where;
C1 = initial concentration (M)
C2 = final concentration (M)
V1 = initial volume (L)
V2 = final volume (L)
According to the provided information in this question;
C1 = 14.38 M
C2 = ?
V1 = 1.28 L
V2 = 9.45 L
Using C1V1 = C2V2
14.38 × 1.28 = C2 × 9.45
18.4064 = 9.45 C2
C2 = 18.4064 ÷ 9.45
C2= 1.95 M