hello:)!! for the preparation of salts , I don’t really understand the part where acids react with insoluble bases. do I just memorise it? :) thanks!

Answer:

Option B. K = 1.3×10⁴, product favored

Explanation:

Data obtained from the question include:

O2(g) + 2SO2(g) <==> 2SO3(g)

Concentration of O2, [O2] = 0.024 M

Concentration of SO2, [SO2] = 0.015 M

Concentration of SO3, [SO3] = 0.26 M

Equilibrium constant, K =..?

The equilibrium constant, K is simply defined as the ratio of the concentration of products raised to their coefficient to the concentration of the reactants raised to their coefficient.

The equilibrium constant for the above reaction can be written as

K = [SO3]² / [O2] [SO2]²

Inputing the values of [SO3], [O2] and [SO2] the equilibrium constant, K is:

K = [SO3]² / [O2] [SO2]²

K = 0.26² / 0.024 × 0.015²

K = 1.3×10⁴

Therefore, the equilibrium constant K is 1.3×10⁴.

Since the value of the equilibrium constant, K is large and positive, therefore, the reaction favours the product.

Bohr describe the arrangement of particles within an atom by: O D. Protons and neutrons form the nucleus of the atom, with electrons orbiting it.

This hypothesis states that the atom's core is a small, compact, positively charged nucleus. Protons which have a positive charge and neutrons which are neutral are both found in the nucleus.

Specific energy levels or electron shells are where the negatively charged electrons orbit the nucleus. Due to the quantization of these energy levels, only a limited number of discrete energy states are accessible to electrons.

Therefore the correct option is D.

Learn more about Niels B.o.h.r

here:https://brainly.com/question/1402660

#SPJ1

Answer:

D. two-stroke cylinder engine.

Explanation:

Two-stroke cylinder engine: In chemistry, the term "two-stroke cylinder engine" is described as one of the types of "internal combustion engine" that tends to complete a single "power cycle" possessing two different strokes of the "piston" during a particular "crankshaft revolution".

It generally consists of two different strokes that are being often known as power or exhaust and suction stroke.

In the question above, the given statement signifies the "two-stroke cylinder engine".

Answer:

epithelial

Explanation:

nervous tissue are located only on specific areas mainly in the dermis like the parcinian to detect pressure so rashes won't be seen.muscle is located deep under the sub cutaneous layer so the symptoms can't appear.connective is also located deep in the skin eg in the eyes but epithelial tissue covers the deeper latest of the skin therefore this condition's signs can be well acknowledged I guess

Answer:

the melting point T = 125.36°C

Explanation:

Given that:

The resistance of a platinum thermometer at  0°C is  [tex]R_o[/tex] = 160.0 ohms

The resistance of a platinum thermometer when immersed in a crucible containing a melting substance [tex]R_t[/tex] = 243.8 ohms

The temperature coefficient at room temperature  20°C = ∝ = 0.00392

The objective is to determine the melting point of this substance

To do that ; at 20°C, the resistance of the platinum thermometer can be calculated as follows:

[tex]R_{20} = R_o(1 + \alpha \Delta T)[/tex]

[tex]R_{20} = 160(1 + (0.00392 \times (20-0)^0C))[/tex]

[tex]R_{20} = 160(1 + (0.00392 \times (20))[/tex]

[tex]R_{20} = 160(1 + (0.0784)[/tex]

[tex]R_{20} = 160(1.0784)[/tex]

[tex]R_{20} = 172.544 \ ohms[/tex]

The resistance of the platinum thermometer at t°C , [tex]R_t[/tex] = [tex]R_{20}(1 + \alpha \Delta T)[/tex]

[tex]243.8 = 172.544(1 + 0.00392 \times (T-20)^0C}[/tex]

[tex]\dfrac{243.8}{ 172.544 }= (1 + 0.00392 \times (T-20)^0C}[/tex]

[tex]1.413 = (1 + 0.00392 \times (T-20)^0C}[/tex]

[tex]1.413-1 = 0.00392 \times (T-20)^0C}[/tex]

[tex]0.413 = 0.00392 \times (T-20)^0C}[/tex]

[tex]\dfrac{0.413 }{0.00392} = (T-20)^0C}[/tex]

105.36°C = (T - 20) °C

T = 105.36°C + 20 °C

T = 125.36°C

Answer:

Na3 Po4

Explanation:

Na+1

Na+1

Na+1 = Na3

Po4 =

Na3Po4

Na[tex]_3[/tex]Po[tex]_4[/tex] is the formula for sodium phosphate. Sodium phosphates have a wide range of uses in food and water treatment.

Sodium phosphate is indeed a catch-all phrase for a number of sodium (Na+) as well as phosphate (PO43) salts. Phosphate also forms di-, tri-, tetra-, as well as polyphosphate families or condensed anions. The majority of these salts exist across both anhydrous (water-free) as well as hydrated forms. Hydrates are more prevalent than anhydrous forms.

Sodium phosphates have a wide range of uses in food and water treatment. Sodium phosphates, for example, are frequently employed particularly emulsifying agent (as in processed cheese), smoothing agents, especially leavening agents in baked products. Na[tex]_3[/tex]Po[tex]_4[/tex] is the formula for sodium phosphate.

Therefore, Na[tex]_3[/tex]Po[tex]_4[/tex] is the formula for sodium phosphate.

To know more about sodium phosphate, here:

https://brainly.com/question/10559079

#SPJ5

[tex]7.408 \;X 10 ^ {-3} m^{-2} s^{-1}[/tex]  is rate of a reaction when k = 0.2, [A] = 3 M, [B] = 3 M, m = 1, n = 2 .

The rate at which the concentration of reactant or product participating in a chemical reaction alters is called the rate of reaction.

Rate of reaction = [tex]\frac{change \;in \;concentration}{time}[/tex] =  (mol/litre)/time.

m= 1 and n = 2

[tex]rate = K [A] [B]^2[/tex]

[tex]0.2 = K X 3 X 3 ^2[/tex]

K =   [tex]\frac{0.2 }{27 }[/tex]

K =   [tex]7.408 \;X 10 ^ {-3} m^{-2} s^{-1}[/tex]

Hence, [tex]7.408 \;X 10 ^ {-3} m^{-2} s^{-1}[/tex]  is rate of a reaction when k = 0.2, [A] = 3 M, [B] = 3 M, m = 1, n = 2 .

Learn more about the rate of a reaction here:

https://brainly.com/question/8592296

#SPJ2

Answer: 7.4 10-3

Explanation:

7.4 10-3 this is right ong

Carbon 14 would be your answer, however if it's more than one answer it would also be Carbon 12, so yeah. Your best bet would be Carbon 14.

Answer:

Blue wave.

Explanation:

Answer:

Concept of chemi-fluorescence

Explanation:

A glow stick usually consists of two chemicals in a larger plastic tube: , a base catalyst (mostly sodium salicylate), and a suitable dye (sensitizer, or fluorophor). This creates an exergonic reaction when mixed together.

When a glow stick is bent, the flurophor which is a chemical that easily re-emits light upon excitation in smaller capsules is released into the other substance, there by causing it to emit radiation/light in the uv-visible region. The brightness and longevity of the glow stick is determined by varying the concentration of these chemicals.

I hope this explanation clarifies things.

Answer:

Protons and neutrons have almost the same mass and are both located in the nucleus of the atom

Answer:

Protons and neutrons have almost the same mass and are both located in the nucleus of the atom. Protons are charged particles. Neutrons are neutral particles. ... The positive charge of the protons in the nucleus is balanced by the negative charge of the electrons.

Answer:

Here's what I get from one source.

Explanation:

[tex]\begin{array}{lc}\textbf{Source} &\textbf{Contribution \%} \\\text{Space heating }& 45\\\text{Water heating} &18\\\text{Space cooling} & 9 \\\text{Computers/Electronics} & 6 \\\text{Lighting} & 6 \\\text{Cooking} & 4 \\\text{Refrigeration} & 4 \\\text{Wet cleaning} & 3 \\\text{Other} & 5 \\\end{array}[/tex]

The pie chart is in the Figure below.

Answer:

There is a lot of empty space between them.

Explanation:

The kinetic molecular theory postulates that a substance is made up of tiny particles called molecules. The molecules of a gas are in constant random motion and collide elastically with each other. They also collide with the walls of the container.

The magnitude of intermolecular forces of attraction between gas molecules is very small. Hence gas molecules are largely apart with a lot of empty space between gas molecules.

Answer:C, There is a lot of empty space between them.

Explanation:

Answer:

beryllium, magnesium, calcium, strontium, barium, radium

Explanation:

glad to help

Answer:

Gas - Steam

Solid - Rock

Liquid - Juice

Answer:

Solid: Ice

Liquid: Water

Gas: Steam or Water vapor

Explanation:

This is a common example to answer your question. Some other examples are:

-most metals(ex: iron, tin, copper, gold) These are solids

-milk, juice, hot chocalate, any soda drink These are liquids

-hydrogen, helium, carbon dioxide, oxygen These are gases

Hope this helps!

Answer:

The solubility of KCl is 1.93 mol/dm³

Explanation:

The information given are;

The mass of the potassium chloride, KCl = 144 g

The volume of the water solvent = 1000 cm³ = 1 dm³

The temperature of the solvent = 90 °C

The atomic mass of potassium, K = 39 u

The atomic mass of chlorine, Cl = 35.5 u

The number of moles of potassium in one mole of potassium chloride, KCl = 1 mole

The number of moles of chlorine in one mole of potassium chloride, KCl = 1 mole

The molar mass of the potassium chloride = 39 + 35.5 = 74.5 g/mol

The number of moles, n, of potassium chloride, KCl in 144 g of potassium chloride, KCl is given as follows

n = Mass/(Molar mass) = 144/74.5 = 1.93 moles

1.93 moles will dissolve in 1 dm³

Therefore, the solubility of KCl is 1.93 mol/dm³.

Answer:

A

Explanation:

civil deals with desighning, construction work of natural or physical environment and a fits guess

Answer:

Explanation:

Electrochemical cells primarily comprise of two half-cells. These half-cells assist in isolating the oxidation and reduction half-reactions. These two reactions are linked by a wire which allows the current to move from one edge to the other. The oxidation at the anode and the reduction take place at the cathode and the addition of a salt bridge helps in completing the circuit and permits the current to flow and leads to the generation of electricity.

Answer:

chlorine is element and carbon dioxide is compound

Answer:

The correct answer would be that Chlorine is an Element and Dioxide is an Compound.

Answer:

if your eyes are exposed to a hazardous chemical you should use the eye wash station. The first few seconds after exposure to a hazardous chemical are critical.

Answer:  [tex]CH_3CH_2CH_2CHO[/tex] has aldehyde functional group.

Explanation:

Functional groups are specific group of atoms within molecules that are responsible for the characteristic chemical reactions of those molecules.

A.  [tex]CH_3CH_2CH_2COCH_3[/tex] has ketone [tex]C=O[/tex] functional group .

B.  [tex]CH_3CH_2CH_2COOH[/tex] has carboxylic acid [tex]COOH[/tex] functional group .

C.  [tex]CH_3CH_2CH_2CHO[/tex] has  aldehyde [tex]H-C=O[/tex] functional group .

D. [tex]CH_3CH_2CH_2COOCH_3[/tex] has ester [tex]RO-C=O[/tex] functional group .

Thus [tex]CH_3CH_2CH_2CHO[/tex] has aldehyde (CHO) group.

Answer:

C I believe not quite sure tho

In heating and melting curves, the name of the heat associated with the solid-liquid phase is Heat of fusion.

What is the Heat of fusion ?

To know more about heat of fusion check this:

brainly.com/question/2554334

#SPJ2

Answer:

D. Pressure

Explanation:

The rate of a reaction is defined as the speed at which the reactants are converted into products. Factors influencing the rate of a reaction are concentration, catalyst, temperature, surface area,  and pressure, etc.

In case of the reaction rate of gases, pressure will only have its affect as pressure do not have any influence on solid and liquid.

While concentration, surface area and catalyst influence all reaction rates including solid, liquids and gases.

Hence, the correct option is (d) pressure.

The single mark placed on the sidewalk by Julie has been acting as the reference point for detecting the motion of the snail. Thus, option D is correct.

The snail has been the shelled animal that has been mostly residing in the resting condition with limited movement. To evaluate the movement of the snail, there has been the consideration of a point that was the starting point from the movement.

The line that has been set across the sidewalk has been acting as the reference, and the distance traveled has been calculated from that point. Thus, option D is correct.

For more information about the reference point, refer to the link:

https://brainly.com/question/1674904

Answer:

d

Explanation:

i got it right

Gas A is likely to have the lowest temperature.  Hence, option A is correct.

The smallest particle of a substance has all of the physical and chemical properties of that substance. Molecules are made up of one or more atoms.

In a gas, the kinetic energy is directly proportional to the temperature under constant pressure and volume.

As you can see in the problem, the average of A has low kinetic energy. But the average is increasing between B, C and D.

As gas A has the lowest average kinetic energy:

Gas A is likely to have the lowest temperature

Hence, option A is correct.

Learn more about molecules here:

https://brainly.com/question/28069497

#SPJ2

Answer:

i) increase

ii) decrease

iii) remain the same

iv) No, because it dissociates completely.

Explanation:

On a 10-fold dilution of a weak acid, the pH will increase because the concentration of hydrogen ions will decrease thereby increasing the pH to close to that of water.

On a 10-fold dilution of a weak base, the pH will decrease due to the removal of hydroxide ions from the solution. This results in the solution having a H closer to that of water.

If one adds a very small amount of strong base to a buffered solution, the pH will remain constant because a buffer solution acts to withstand any change to its pH on the addition of small quantities of either an acid or a base.

A buffer solution cannot be made with a strong acid because thy undergo complete dissociation. Therefore, any small addition of base or acid will result in very large changes in the pH of the solution. A buffer solution is made with a weak acid and its conjugate base or a weak base and its conjugate acid.

Answer:

0.020g de sulfato de plomo se requieren

La concentración de la solución diluida es de 3ppm

Explanation:

Las partes por millón (ppm) son definidas como:

miligramos soluto / 1L solución.

Si deseas preparar una solución a 100ppm de sulfato de plomo (II) necesitas 100mg de este sulfato en 1L. En 200mL = 0.200L vas a necesitar:

0.200L × (100mg / 1L) = 20mg de sulfato de plomo (II).

Como 1000mg = 1g,

20mg × (1g / 1000mg) = 0.020g de sulfato de plomo se requieren.

Ahora, se van a tomar 30mL de esta solución y se diluirán a 1000mL. Se diluye la solución:

1000mL / 30mL = 33.33 veces.

Como la solución inicial es de 100ppm, esta dilución genera una solución de concentración:

100ppm / 33.33 = 3ppm

The question is incomplete, the complete question is;

A student investigated some properties of lead and recorded the findings in the table below. Property Observation Color Dull gray Density 11.3 g/cm3 Volume of sample 3 cm3 Melting point 327°C Reaction with air Lead oxide forms on the surface Electrical conductivity Conducts some electricity Which statement is true with respect to the investigation?

A. The student investigated only the physical properties of lead.  

B. The student investigated only the chemical properties of lead.  

C. The student investigated more physical properties than chemical properties of lead.  

D. The student investigated more chemical properties than physical properties of lead.

Answer:

The student investigated more physical properties than chemical properties of lead.

Explanation:

If we look at the things mentioned in the question as regards the approach of the student towards the study of lead, we will discover that he/studied;

Colour, density, volume, melting point and electrical conductivity which are all physical properties. Physical properties of a substance does not involve chemical reactions of the substance under study.

The only chemical property studied by the student is its formation of an oxide- lead oxide with air as follows;

2Pb(s) + O₂(g) → 2PbO(s)

Thus we can safely conclude that; the student investigated more physical properties than chemical properties of lead.

Answer:

c

Explanation:

edge 2021 :)

Answer:

25 g

Explanation:

Mass percent implies the mass of solute dissolved in a solution

Mass percent = mass of solute/mass of solute + mass of solvent × 100/1

Since mass percent concentration= 20%

Mass of solvent = 100g

Let mass of solute = x

Hence;

20 = x/x +100 ×100/1

20/100= x/x + 100

0.2 = x/x + 100

0.2(x + 100) = x

0.2x + 20 = x

20 = x - 0.2x

20 = 0.8x

x= 20/0.8

x= 25 g

Answer:

The correct option is;

The reaction pathway for the trials is different

Explanation:

The effect of a catalyst in a chemical reaction is to increase the rate of a reaction by changing the pathway or mechanism of the reaction and/or to lower the transition state's energy thereby lowering the activation energy of the reaction

The pathway of the reaction is changed by the catalyst by the formation of intermediate compounds by the catalyst which require lower activation energy to form the products than the original non-catalyzed reactants. In the process the catalyst is regenerated, thereby, not taking part in the reaction.