Answer:
The loudness of sound is determined, in turn, by the intensity, or amount of energy, in sound waves. The unit of intensity is the decibel (dB) Intensity of sound results from two factors: the amplitude of the sound waves and how far they have traveled from the source of the sound.
Explanation:
____Al+____O2 → ____Al2O3
Which of the following sets of coefficients would correctly balance the equation and why?
A. 2, 2, 2; because you must use the same coefficient for each substance.
B. 2, 3, 2; because you must have the same number of atoms on each side of the equation.
C. 4, 3, 2; because you must have the same number of compounds on each side of the equation.
D. 4, 3, 2; because you may have the same number of atoms on each side of the equation
Answer:
D
Explanation:
You balance an equation so that all the elements have the same number of atoms on each side of the equation.
In order to calculate the number of neutrons you must subtract the what from the what?
Answer:
You take the atomic, or proton number of the element, and you subtract it from the element's mass number.
Answer:
protons
Explanation:
neutrons and protons make up the mass of the atom
How much energy is released when 75g of liquid water is reduced from 65c to 0c and completely freezes?
Answer:
Q = 20377.5 Joules
Explanation:
Given the following data;
Mass = 75g
Initial temperature = 65°C
Final temperature = 0°C
Specific heat capacity of water = 4.18 J/g°C.
To find the quantity of heat released;
Heat capacity is given by the formula;
[tex] Q = mcdt[/tex]
Where;
Q represents the heat capacity or quantity of heat.
m represents the mass of an object.
c represents the specific heat capacity of water.
dt represents the change in temperature.
Substituting into the equation, we have;
[tex] Q = 75 * 4.18 * 65 [/tex]
Q = 20377.5 Joules
is sodium oxide an acidic oxide or a basic oxide
Answer:It a Basic oxide
Plz trust Me
Explanation:
Answer:
Sodium oxide is a simple strongly basic oxide. It is basic because it contains the oxide ion, O2-, which is a very strong base with a high tendency to combine with hydrogen ions. Reaction with water: Sodium oxide reacts exothermically with cold water to produce sodium hydroxide solution.
Explanation:
Hurry please need fast
In the following chemical phrase how many moles of O are there? 6
C2H602* 2
6
12
3
Use the information provided in the table to
determine the K, for methylammonium ion, the
conjugate acid of methylamine.
X6.8 x 10-19
4.4 x 1010
2.8 x 109
2.3 x 10-11
Answer: D
Explanation:
2.3x10-11
Answer:
D. 2.3 x 10^-11
Explanation:
Look at the image below
Describe how you could show that a compound is an acid
If an object is on top of a hill or in a position raised above the ground, it must have __________.
Answer:
The force applied to the object is an external force, from outside the system. When it does positive work it increases the gravitational potential energy of the system. Because gravitational potential energy depends on relative position, we need a reference level at which to set the potential energy equal to 0.
If an object is on top of a hill or in a position raised above the ground, it must have gravitational potential energy.
What is Potential Energy ?
In physics, potential energy is the energy held by an object because of its position relative to other objects, stresses within itself, its electric charge, or other factors
If an object is lifted, work is done against the force of gravity.
When work is done energy is transferred to the object and it gains gravitational potential energy.
If the object falls from that height, the same amount of work would have to be done by the force of gravity to bring it back to the Earth’s surface.
Due to the Principle of Conservation of Energy we can say that:
Gravitational potential energy at the top = kinetic energy at the bottom
To know more about Potential Energy
https://brainly.com/question/24284560
#SPJ2
gu khayo bhana m hunxa hola
Answer:
[tex] \huge\pink{\boxed{\mathfrak{Hola}}}[/tex]
I didn't understand the rest of your question, it's not in English or Spanish.
[tex]\huge\fbox{HôLLa}[/tex]
What is the new concentration of a solution after 250mL of 2.5M sulfuric acid is diluted to a final volume of 700mL?
Please show your work
Answer:
The new concentration of the solution is 0.89 M.
Explanation:
In chemistry, dilution is the reduction in concentration of a chemical in a solution. This is accomplished by adding more solvent to the same amount of solute.
So, in a dilution, the amount of solute does not vary, but the volume of the solvent varies: as more solvent is added, the concentration of the solute decreases, as the volume (and weight) of the solution increases.
In a dilution the expression is used:
Ci*Vi = Cf*Vf
where:
Ci: initial concentration Vi: initial volume Cf: final concentration Vf: final volumeIn this case:
Ci= 2.5 M Vi= 250 mLCf=? Vf= 700 mLReplacing:
2.5 M* 250 mL= Cf* 700 mL
Solving:
[tex]Cf=\frac{2.5 M*250 mL}{700 mL}[/tex]
Cf= 0.89 M
The new concentration of the solution is 0.89 M.
Name the following alkyne:
A. propane
B. propene
C. propyne
D. methyne
The name of the alkyne which is given in the question with structure is propyne as in that 3 carbon atoms are present.
What are alkynes?Alkynes are those hydrocarbons in which triple bond is present between two adjacent carbon atoms.
In the given structure one triple bond is present between first two carbon atoms and then with this a single bonded carbon atom is also attached. As in the structure total three carbon atoms are present so prefix shoul be 'prop' and as this is an alkyne then name should be propyne.
Propane is wrong because it is used with single bonded hydrocarbons.Propene is also wrong as it is used with double bonded hydrocarbons.Methyne is also wrong as it is not a word that make any sesne.Hence name of compound is propyne.
To know more about alkynes, visit the below link:
https://brainly.com/question/14944720
Propyne is the chemical name for the given alkyne. Therefore, the correct option is option C.
A triple bond exists between the carbon atoms in alkynes, a group of hydrocarbon molecules. They are given names based on the IUPAC (International Union of Pure and Applied Chemistry) guidelines for systematic nomenclature. Alkyne nomenclature's primary objective is to provide each compound a precise and distinctive name that accurately captures its structure. Based on the quantity of carbon atoms, the placement of triple bonds, and the presence of functional groups, alkyne compounds are named systematically.
To know more about chemical name, here:
https://brainly.com/question/30633673
#SPJ6
.What is the significance of genetic variation within the population of moths during and after the Industrial Revolution in London?
Answer:
The evolution of the peppered moth is an evolutionary instance of directional colour change in the moth. The frequency of dark-coloured moths increased at that time, an example of industrial melanism.
Explanation:
I did this on Savvas Realize got it right.
Genetic variation is said to be the difference in the hereditary sequence. After the industrial revolution, the frequency of the dark-colored moth increased dramatically more than the light-colored moths.
What is industrial melanism?
Industrial melanism was an example of the evolutionary effect that occurred in the moths where the dark-colored species were favored over the light-colored species of peppered moths.
Before the industrial population, light-colored moths were large in number which later decreased with an increase in pollution. This occurred due to an increase in the pollutants and dust deposition that altered the environment.
As the pollution increased over time the dark-colored moths became dominant and increased their population over time. This is an example of industrial melanism as the color of the body was the determining factor in survival.
Therefore, dark-colored moths were prevalent after the industrial revolution.
Learn more about industrial melanism here:
https://brainly.com/question/15283847
#SPJ5
how to calculate the mass percent of hydrogen
Answer:
divide the mass of element in 1 mole of the compound by the compound's molar mass and multiply the answer by 100.
Explanation:
take the molar mass of hydrogen in the water molecule, divide by the total molar mass of water, and multiply by 100.
does it help?
If 5.60 mol of a substance releases 14.9 kJ when it decomposes, what is ΔH for the process in terms of kJ/mol of reactant?
Answer:
The correct approach is "-2.67 kJ/mole". A further solution is described below.
Explanation:
The given values are:
No. of moles,
= 5.60 mol
Substance releases,
ΔH = 14.9 kJ
Now,
The ΔH in terms of kJ/mol will be:
= [tex]\frac{\Delta H}{5.60}[/tex]
On putting the given values of ΔH, we get
= [tex]\frac{-14.9}{5.60}[/tex]
= [tex]-2.67 \ kJ/mole[/tex]
In making her morning tea, Dorothy drops a sugar cube into some hot water. She stirs the mixture but no longer sees the sugar cube at the bottom of her mug. Based on her observation of sugar dissolving in hot water, she can properly conclude that the sugar is
Answer:
Hydrophilic
Explanation:
A hydrophilic substance is any substance that interacts efficiently with water.
Since water is a polar solvent, a hydrophilic substance must also be polar in order to interact with water since like dissolves like in chemistry.
The fact that sugar disappears in hot water indicates that sugar is a polar hydrophilic substance because only a polar solute can dissolve in water
Based on her observation of sugar dissolving in hot water, she can properly
conclude that the sugar is hydrophilic.
A substance is said to be hydrophilic when it is able to react and dissolve in
water due to the attractive force between them. Hydrophobic substances
don't dissolve in water.
In this scenario, we were told the sugar dissolved completely in water which
means that the sugar is hydrophilic.
Read more on https://brainly.com/question/1600542
Water and phosphorus with a total mass of 200 grams are added to a flask like the one below and then the flask is sealed with a rubber stopper. The flask is then heated up so that a reaction occurs but no gas from the reaction escapes the flask. How much mass would you expect to be in the flask after the reaction occurs
Answer:
h20 o3vbjbxhnnhbnkknnchemesry
The two main postulates that was given by Antoine Lavoisier are, oxygen play an important role in combustion and the other is mass of the reactant and product is conserved. The total mass will be 200g in the flask after the reaction occurs.
What is law of conservation of mass?According to Law of conservation of mass, mass can neither be created nor be destroyed. Mass can only be transformed from one form to another. The law of conservation of mass was given by Antoine Lavoisier. Every reaction in nature follow the law given by Antoine Lavoisier that is mass is always conserved.
The total mass of reactant water, phosphorous is 200g, then the total mass of product will remain same after reaction according to law of conservation of mass.
Therefore, the total mass will be 200g in the flask after the reaction occurs.
To know more about law of conservation of mass, here:
https://brainly.com/question/28711001
#SPJ5
What must happen to uranium before it can be used as a fuel source?
A. No changes are necessary.
B. Stable U-235 must be enriched with 3% radioactive U-238.
C. Stable U-238 must be enriched with 3% radioactive U-235.
D. Unstable U-235 must be enriched with 5% U-238 to stabilize it.
Answer:
D
Explanation:
Before it can be used in a reactor for electricity generation, however, it must undergo a series of processes to produce a useable fuel. For most of the world's reactors, the next step in making the fuel is to convert the uranium oxide into a gas, uranium hexafluoride (UF6), which enables it to be enriched.
Unstable U-235 must be enriched with 5% U-238 to stabilize it. Hence, option D is correct.
What is radioactive?Radioactivity is the phenomenon of the spontaneous disintegration of unstable atomic nuclei into atomic nuclei to form more energetically stable atomic nuclei.
Before uranium can be used in a reactor for electricity generation, however, it must undergo a series of processes to produce a useable fuel.
For most of the world's reactors, the next step in making the fuel is to convert the uranium oxide into a gas, uranium hexafluoride (UF6), which enables it to be enriched.
Hence, option D is correct.
Learn more about radioactive here:
https://brainly.com/question/1770619
#SPJ2
Experiment: Select the DATA tab, and check that every species is selected. Click Advance year 10 times. Which fish populations increased, and which fish populations decreased?
arts Per Thousand ... Click advance year 10 times. ... Which organism was most hurt by increased storms, and why do you think this is so? ... On the Coral Reef tab I see less fish and on the Data tab I see Staghorn Coral has majorly decreased. ... B. How does this change the populations of the two species that eat algae, ...
Answer:
increase: yellow tail snapper
decrease: grouper, parrotfish, angelfish
Explanation:
B. Radiation
D. roasting
How do vibrations of particles behave when sounds travel through solids?
A occurs fast
C. occurs moderately
B. occurs very slowly
D. cannot be determined
Hii! i’m timed so can someone please answer quickly!
What is the frequency of this wave? 1,2,3, or 4
I cant find any answers to this question! i really appreciate it!
Count the in between joint bunches of curve lines .
First one at beginninglast one at end .And one is in middleFrequency is 3-1=2
Which is not an example of a
parasite/host relationship?
A flea on a dog
A tick on a horse
A toad on a lily pad
A barnacle on a whale
Answer:
A toad on lily pad
Explanation:
have a great day
The decomposition of water into hydrogen gas Hy and oxygen gas Oz can be modeled by the balanced chemical equation
A)
H2 + 02 - H20
B)
H20 - H2 + O2
C) 2H2 + 02 - 2H20
D)
2H20 - 2H2 + O2
Answer:
D. ) 2H2O - 2H2 + O2
Look at the diagram below. According to the diagram, what substance(s) are the
reactant(s)? What substance(s) are the product(s)? Explain your reasoning.
NH3(aq) + HCI (aa)
Ammonia Hydrochloric acid
NHCI (aa)
Ammonium chloride
You will be graded on the following rubric:
luje
Answer:
NH3(aq) and HCl(aq) are the reactants, while NH4Cl(aq) is the product.
Explanation:
The hydrogen atom from the HCl molecule joins the other three in NH3 creating a four hydrogen molecule, NH4Cl.
What is the charge of Mn in MnO4- ?
Answer: +7
Explanation: Sum of all the oxidation numbers in a polyatomic ion is equal to the charge on the ion. Thus, the total charge on the polyatomic anion is −1. Thus, the oxidation number of Mn in MnO−4 is +7.
helium gas (He) effuses ___ times faster than methane (CH4)
a. 1.80
b. 2.00
c. 2.20
d. 2.40
Answer:
b 2.00
Explanation:
I am pretty sure that is right
How many moles are in 15.3 grams of KNO3?
Answer:
0.151 mol
Explanation:
molar mass of KNO3 = (39.1 + 14 + 3×16) g/mol = 101.1 g/mol
number of moles = mass/molar mass
n = m/M = 15.3 g/(101.1 g/mol) = 0.151 mol
Calculate the amount of heat energy is needed to raise the temperature of 5.00 grams of lead from 25.0 to 35.0 degrees Celsius, if the specific heat capacity of lead is 0.129 J/g/C.
Answer: 6.45 Joules
Explanation: I just did it
HELP ASAP
Which of these atoms ihas the HIGHEST reactivity?
Answer:
aaaaaaaaaaaaaaaaaaaaaaaaassaaaa
Zn + 2HCl → ZnCl2 + H2
How many moles of hydrogen are produced from the reaction of
6.0 moles of zinc?
Answer:
6
Explanation:
6.0mol ( 1 mol H2/ 1 mol Zn ) = 6.0 mol of H2
H2 is hydrogen gas (hydrogen in the air).
How is a TV like our brain?
Answer:
Explanation:
Because your brain and the TV are programed to do certain things. As if you're going back into a memory, and you're simply rewatching a season of Beyblade: Metal Fusion on the TV.