Help for number 9 Please!

Answer:

Explanation:

your not so smart

Answer:

pH = 2.25

Explanation:

pH is a measurement in chemistry defined as the -log [H₃O⁺]. Molarity [], is defined as the ratio between moles of solute (HCl) and the liters of solution

To solve this question we must find the molarity of the H₃O⁺ knowing: [HCl] = [H₃O⁺]

[HCl]:

0.0084moles / 1.500L

= 0.0056M = [HCl] = [H₃O⁺]

pH = -log [H₃O⁺] = -log [0.0056M]

A solution prepared by dissolving 0.0084 moles of HCl in 1500 mL of solution has a molar concentration of HCl of 5.6 × 10⁻³ M, a molar concentration of H₃O⁺ of 5.6 × 10⁻³ M and a pH of 2.3.

A solution is prepared by dissolving 0.0084 moles of HCl in 1500 mL of solution. The molarity of HCl is:

[tex][HCl] = \frac{0.0084mol}{1.5L} = 5.6 \times 10^{-3} M[/tex]

HCl is a strong acid according to the following equation.

HCl(aq) + H₂O(l) ⇒ Cl⁻(aq) + H₃O⁺(aq)

Thus, the concentration of H₃O⁺ will be equal to the initial concentration of HCl, 5.6 × 10⁻³ M.

Finally, we will calculate the pH of the solution using its definition.

[tex]pH = -log [H_3O^{+} ] = -log (5.6 \times 10^{-3} ) = 2.3[/tex]

A solution prepared by dissolving 0.0084 moles of HCl in 1500 mL of solution has a molar concentration of HCl of 5.6 × 10⁻³ M, a molar concentration of H₃O⁺ of 5.6 × 10⁻³ M and a pH of 2.3.

Learn more: https://brainly.com/question/14950262

Answer:

Sediment forms when any type of rock is weathered, a process driven by energy from the sun. Magma forms when any type of rock is melted, a process driven by energy from Earth's inter

Explanation:

Answer: D

Explanation:

Answer:

planet asteroid

Explanation:

planet asteroid

As a result, when a substance absorbs enough energy then its atoms or molecules move around. And, when increase in this energy takes place then atoms tend to collide frequently with each other. Hence, it causes change in state of a substance. Therefore, changes in matter are important for the conservation of energy

mark brainliest if right

Answer:

-.30

Explanation:

H2SO4/sulfuric acid/dihydrogen sulfate is a strong acid, meaning that it easily releases an H+. You have to be careful with this problem, however, as H2SO4 is really only a strong acid for one of its hydrogens. In other words, after it becomes HSO4- upon releasing an H+, it is no longer a strong acid and therefore should not be factored into our calculation.

Now, moving onto the calculation, there are two key things we need to carry it out. First is the pH equation. pH = -log [H+]. And second is the concentration of H2SO4, which is equivalent to the concentration of that H+ released: 2.0 M.  Simply plug in your values.

pH = -log [2.0].

pH = -.30

Answer:

The food chain starts as prey to a preditor and then when the preditor dies the prey eat the preditor

Explanation:

Just that

Answer:

jdjdjsjdjkxjejf

Explanation:

djdjsjsdkdkdk

*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆**☆*――*☆*――*☆*――*☆

Answer: True

I hope this helped!

<!> Brainliest is appreciated! <!>

- Zack Slocum

*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆**☆*――*☆*――*☆*――*☆

Answer:

true

Explanation:

Answer:

Approximately [tex]1.95 \times 10^{2}\; \rm J[/tex].

Explanation:

Look up the specific heat of gaseous neon:

[tex]c = 1.03 \; \rm J \cdot g^{-1} \cdot K^{-1}[/tex].

Calculate the required temperature change:

[tex]\Delta T = (37.9 - 20.0)\; \rm K = 17.9\; \rm K[/tex].

Let [tex]m[/tex] denote the mass of a sample of specific heat [tex]C[/tex]. Energy required to raise the temperature of this sample by [tex]\Delta T[/tex]:

[tex]Q = c \cdot m \cdot \Delta T[/tex].

For the neon gas in this question:

Calculate the energy associated with this temperature change:

[tex]\begin{aligned}Q &= c \cdot m \cdot \Delta T \\ &= 1.03\; \rm J \cdot g^{-1}\cdot K^{-1} \times 10.6\; \rm g \times 17.9\; \rm K \\ &\approx 1.95 \times 10^{2}\; \rm J\end{aligned}[/tex].

Answer:

78.14% Pb²⁺ and 21.86% of Cd²⁺

Explanation:

The first titration involves the reaction of both Pb²⁺ and Cd²⁺

In the second titration, as the buffer is HCN/NaCN, the Cd²⁺ precipitates as Cd(CN)₂ and the only ion that reacts is Pb²⁺

In the first titration:

Moles EDTA = Moles Pb²⁺ and Cd²⁺:

28.89mL = 0.02889L * (0.06950moles / L) = 2.008x10⁻³ moles in the aliquot. In the sample:

2.008x10⁻³ moles * (250.0mL / 50.0mL) =

0.01004 moles = Pb²⁺ + Cd²⁺ (1)

In the second titration:

19.07mL = 0.01907L * (0.06950mol / L) = 1.325x10⁻³ moles Pb²⁺ in the aliquot. In the sample:

1.325x10⁻³ moles Pb²⁺ * (250.0mL / 50.0mL) =

6.626x10⁻³ moles Pb²⁺

That means the moles of Cd²⁺ are:

0.01004 moles = Cd²⁺ + 6.626x10⁻³ moles Cd²⁺

3.413x10⁻³ moles Cd²⁺

The mass of each ion is:

Cd²⁺ -Molar mass: 112.411g/mol-:

3.413x10⁻³ moles Cd²⁺ * (112.411g / mol) =

0.384g of Cd²⁺

Pb²⁺ -Molar mass: 207.2g/mol-:

6.626x10⁻³ moles Pb²⁺ * (207.2g / mol) =

1.373g of Pb²⁺

The percent mass of each ion is:

1.373g Pb²⁺ / 1.757g = 78.14% Pb²⁺

And:

0.384g of Cd²⁺ / 1.757g * 100 = 21.86% of Cd²⁺

Answer:

The population of grasshoppers would increase becuase there arent as many owls to hunt?feed on them.

Explanation:

Hope this helps

Answer: As the temperature of a molecular system increases, the kinetic energy of molecules also increase. Also as the temperature of a molecular system decreases, the kinetic energy of the molecules will also decrease.

Explanation:

James Clerk Maxwell developed the kinetic-molecular theory (KMT) of gases. In this theoey, five assumptions concerning an ideal gas was made. One of the them was that," the average kinetic energy of the gas molecules is proportional to the temperature of the gas". This simply means that a s the temperature of a molecular system increases, the kinetic energy of molecules also increase. Also as the temperature of a molecular system decreases, the kinetic energy of the molecules will also decrease.

Also another scientist known as Rudolf Clausius incorporated energy into the kinetic theory. He proposed that heat is a form of energy that affects the temperature of matter by changing the motion of molecules in matter.

Heat is defined as the flow of energy which is caused by difference in temperature.

In conclusion, when the temperature of a system is increased, the collision of the molecules with one another and the walls of their container increases as more molecules gain more heat energy at higher temperature. While as the temperature of the system decreases, the collision of the molecules will also decrease as molecules lose heat energy at lower temperature.

Answer:

Temperature increases the average kinetic energy of the atoms as well as molecules increases because when the temperature increases the collision between the atom and molecules increases and particles may collide with one another.

because it may associate with the thermal energy when thermal energy increases because of the motion of the gas particle and may initiate the kinetic energy of the gas.

when the temperature goes increasing the movement of the particle is at a very high rate, especially in gas and then solids, and especially this must be increased when the endothermic reaction is involved this must proceed such a reaction that the temperature results in to increase in the average kinetic energy.

https://brainly.com/question/26080657

#SPJ4      

Answer:

Explanation:

Around 439 million years ago, 86% of life on Earth was wiped out. Scientists believe two major events resulted in this extinction: glaciation and falling sea levels. Some theories suggest that the Earth was covered in such a vast quantity of plants that they removed too much carbon dioxide from the air which drastically reduced the temperature. Falling sea levels were possibly a result of the Appalachian mountain range forming. The majority of the animal life lived in the ocean. Trilobites, brachiopods, and graptolites died off in large numbers but interestingly, this did not lead to any major species changes during the next era.

Answer:

The solution is Basic

A chemist must prepare 0.200 L of 1.00 M aqueous silver nitrate working solution. He'll do this by pouring out 1.82 mol/L aqueous silver nitrate stock solution into a graduated cylinder and diluting it with distilled water. How many mL of the silver nitrate stock solution should the chemist pour out?

Answer: 0.110 L

Explanation:

According to the dilution law,

[tex]M_1V_1=M_2V_2[/tex]

where,  

[tex]M_1[/tex] = molarity of stock silver nitrate solution = 1.82 M

[tex]V_1[/tex] = volume of stock silver nitrate solution = ?  

[tex]M_1[/tex] = molarity of diluted silver nitrate solution = 1.00 M

[tex]V_1[/tex] = volume of diluted silver nitrate solution = 0.200 L

Putting in the values we get:

[tex]1.82M\times V_1=1.00M\times 0.200L[/tex]

[tex]V_1=0.110L[/tex]

Therefore, volume of silver nitrate stock solution required is 0.110 L

Answer:

True

Explanation:

More the concentration of H⁺ ions than OH⁻ions the pH value will be less than 7. Therefore, the given statement is false.

The pH of a solution can be described as the negative logarithm of hydrogen (H⁺) ion concentration. pH is mathematically inversely proportional to the concentration of hydrogen ions.

pH = - log ([H⁺])

In chemistry, pH is used to determine the acidity or basic strength of an aqueous solution. Acidic solutions are determined to have lower pH values than alkaline solutions.

The pH scale exhibits a range from 0 to 14 while pH 7.0 is neutral. A low pH value is acidic while a high pH means basic.

If the concentration of  H⁺ ions than that of OH⁻ ions then the pH value of the solution will decrease and a low pH value of 7 indicates that the solution is acidic.

Learn more about pH value, here:

brainly.com/question/1503669

#SPJ2

Answer:

my guy we need to read lesson cuz int know what any of that mean

Explanation:

Answer:

The Coriolis effect

Explanation:

The Coriolis effect is the effect that makes tornados, water spouts, and are often seen in storms. They make water curve and rotate as well as the wind And current.

Answer:

[tex]m_{solute}=0.05g[/tex]

Explanation:

Hello there!

In this case, according to the equation for the calculation of the parts per million:

[tex]ppm=\frac{m_{solute}}{m_{solution}} *1x10^6[/tex]

It is possible to solve for the mass of KI (solute) as shown below:

[tex]m_{solute}=\frac{ppm*m_{solution}}{1x10^6}[/tex]

Thus, we plug in to obtain:

[tex]m_{solute}=\frac{25*2,000g}{1x10^6} \\\\m_{solute}=0.05g[/tex]

Best regards!

Answer:

hiiiiiiiiiíiiiiiiiiiii

Answer:

For carbon the most important forms of hybridization are the sp2- and sp3- hybridization. Besides these structures there are more possiblities to mix dif- ferent molecular orbitals to a hybrid orbital. An important one is the sp- hybridization, where one s- and one p-orbital are mixed together.

Answer:

[tex]V_2=2.62L[/tex]

Explanation:

Hello there!

In this case, according to the given problem, it is possible for us to notice that the equation to be used is the Avogadro's one in terms of mass because this is applied to the same gas, hydrogen:

[tex]\frac{V_2}{m_2} =\frac{V_1}{m_1} \\\\[/tex]

Thus, by considering both the initial and final masses and the initial volume, we can compute the final volume as shown below:

[tex]V_2 =\frac{V_1m_2}{m_1} \\\\V_2=\frac{2L*50.0g}{38.2g} \\\\V_2=2.62L[/tex]

Best regards!

Answer:

Iron, according to:

[tex]2Al(s)+3Fe(NO_3)_2(aq)\rightarrow 3Fe(s)+2Al(NO_3)_3(aq)[/tex]

Explanation:

Hi there!

In this case, according to the law of conservation of mass, which states that matter cannot be neither created nor destroyed, it is possible for us to figure out the missing element in the reaction by taking into account this is a single displacement reaction in which Al goes with NO3 to produce the Al(NO3)3, and therefore the other element would be iron (Fe) as can be seen on the following chemical reaction:

[tex]2Al(s)+3Fe(NO_3)_2(aq)\rightarrow 3Fe(s)+2Al(NO_3)_3(aq)[/tex]

Best regards!

Answer:

Rutherford passed beams of alpha particles through a thin gold foil to observe the atom and noted how the alpha particles scattered from the foil.

Observations of Rutherford's alpha ray scattering experiment:

1.Most of the α-particles passed straight through the gold foil without any deviation.

2. Some of the α-particles were deflected by the foil by some angles.

3.Interestingly one out of every 12,000 alpha particles appeared to rebound

Conclusion of Rutherford's scattering experiment:

1.Most of the space inside the atom is empty because most of the α-particles passed through the gold foil without getting deflected.

2. Very few particles were deflected from their path, indicating that the positive charge of the atom occupies very little space.

3. A very small fraction of α-particles were deflected by very large angles, indicating that all the positive charge and mass of the gold atom were concentrated in a very small volume within the atom.

Answer:

Explanation:

The peak at 1700-17200 cm⁻¹ in the infrared spectrum shows the existence of a carbonyl group (C=O).  The appearance of an OH peak is shown by the broad peak at 2500-3000 cm⁻¹. The peak at 12.4 ppm in 1H NMR identifies the existence of carboxylic acid. The peaks at 6.78 ppm and 7.11 ppm suggest that the prevalence existence of a benzene ring in the molecule. Because these peaks are doublets, the benzene is being para-substituted.

The existence of the CH2 group is shown by the peak at 2.49 ppm, which integrates 2 hydrogens. Provided that the breaks are doublets, It would be bound to another CH2 molecule as well as carbon that is devoid of hydrogen (benzene carbon).

The existence of the CH2 group, which is linked to the above-listed CH2 group, is also demonstrated by the next peak at 2.8 ppm. It must be bonded with carbonyl carbon so it breaks as a doublet. As a result, it has a greater chemical transition. The CH3 category is shown by the peak at 3.72 ppm. Its chemical change is strong, indicating that CH3 is linked to an oxygen atom that is linked to benzene.

NMR details at 13C. Carbonyl carbon of acid has a high (peak) at 173.89 ppm. Benzene carbon peaks range from 113.55 to 157.87 ppm. The peak at 64 is made up of CH3, while the other two are made up of CH2.

The structure of the diagram is shown below with its degree of unsaturation.

Answer:

Density differences

Explanation:

The water transports cool masses of air and hot air, the transports is driven by the amount of changes of Temperature and Salinity (ThermoHaline)