Help me please im stuck

Answer:

solar electric energy

Explanation:

k12

The correct location of the given object on represents continental drift or seafloor spreading.

The scientist Alfred Wegener is most closely connected with the concept of continental drift. Wegener wrote a paper outlining his notion that the continents were “drifting” across the Earth, occasionally crashing through oceans and into one another, in the early 20th century.

The seafloor spreading is the increase of seawater covering the land area. The spreading of seawater is decreasing the land area.

Thus, the correct location is:

To learn more about continental drift, refer to the below link:

https://brainly.com/question/15122129

#SPJ6

Answer:

Battery

Explanation:

The battery supplies the electricity needed for the circuit to work.

0.010 M solution of hydrochloric acid, HCl has a pH of 2.00 but a 0.010 M solution of acetic acid, HCH₃COO, is 3.37 is because HCl dissociates more.

This is the separation of ions of an ionic compound when it dissolves.

Since 0.010 M solution of hydrochloric acid, HCl has a pH of 2.00 its hydrogen ion concentration is gotten from

pH = -log[H⁺]

So,

[tex][H^{+} ] = 10^{-pH}[/tex]

So, [H⁺] = 10⁻²

Also, since 0.010 M solution of acetic acid, HCH₃COO, has a pH of 3.37, its hydrogen ion concentration is gotten from

pH = -log[H⁺]

So,

[tex][H^{+} ] = 10^{-pH}[/tex]

So, [H⁺] = 10⁻³°³⁷ = 0.000427 = 4.27 × 10⁻⁴

Since the hydrogen ion concentration of HCl is 10⁻² and the hydrogen ion concentration of HCH₃COO is 4.27 × 10⁻⁴, we see that HCl dissociates more than HCH₃COO.

So, 0.010 M solution of hydrochloric acid, HCl has a pH of 2.00 but a 0.010 M solution of acetic acid, HCH₃COO, is 3.37 is because HCl dissociates more.

Learn more about dissociation here:

https://brainly.com/question/25854432

Answer:

Organelles are structures within a cell that perform specific functions like controlling cell growth and producing energy. Plant and animal cells can contain similar types of organelles. However, certain organelles can only be found in plant cells and certain organelles can only be found in animal cells.

The curved arrow mechanism for the reaction as described is as represented in the attached image.

Nitriles, upon reaction with LiAlH4 can be converted to 1° amines.

Opon occurrence of this reaction, the hydride nucleophile attacks the electrophilic carbon in the nitrile to form an imine anion. Once stabilized by a Lewis acid-base complexation the imine salt can accept a second hydride to form a dianion.

On this note, the nitrile reduction of 4-methyl pentanenitrile and lialh4, followed by the addition of acid to give the major product is as represented in the attached image.

Read more on nitrile reduction by LiAlH4;

https://brainly.com/question/9002449

Answer:

Your answers would be:

-impression fossils

-trace fossils

-replacement fossils

Explanation:

Have a great rest of your day
#TheWizzer

Answer:

The are id-k- I dont know much on fossials. But did you know that thunder is lighting. I say this because thunder is just the noise lighting makes. We see the light firts because light travels faster than sound.

Explanation:

Hope This Helps

Have A Great Day

~Zero~

Typical household bleach has a value of pH of 13, so the concentration of H₃O⁺ in household bleach is 1 × 10⁻¹³ M.

pH of any solution is defined as the negative logarithm of the concentration of H⁺ ion presnt in the solution.

pH = -log[H⁺]

From this equation we can calculate the concentration of H⁺ ion by removing logarithm as:

[H⁺] = [tex]10^{-pH}[/tex]

Given value of pH = 13

[H⁺] = 10⁻¹³ M

Hence, required concentration is 1 × 10⁻¹³ M.

To know more about pH, visit the below link:

https://brainly.com/question/10313314

Answer:

1st blank is 1.00

2nd blank is -13

Explanation:

Answer:

The independent variable is the calculator

The dependent variable is the speed of solving the problem.

The constant variable is the same set of problems that were assigned to two groups of students.  

The dependent variable is the one that is being tested by experimentation. The dependent variable depends on the independent variable.  

The independent variable can b changed by the experimenter whereas the constant variable remains unchanged throughout the experiment.  

Answer:

Controlled Variable: The same math problems

Dependent Variable: The amount of time taken to answer

Independent Variable: One group using calculators and the other group not using calculators.

Explanation:

The dependent variable is the variable being tested and the independent variable is what is being changed. The controlled is what is staying the same.

Answer :By the time thermal equilibrium is attained in the system, ice is completely converted to water.

What is tehrmal equilibrium?

Thermal equilibrium is a situation in which two substances are exactly at the same temperature. That is. Heat is no longer flowing beween the bodies.

Recall that an insulated thermos flask implies that heat does not eneter or leave the system. Heat will flow from the water to the ice untill the both attains the same temperature and the ice is completely converted to water.

Have a good day

Answer:

I believe is the correct answer

Explanation:

100bromoaniline+nano2+hcl

they can survive without oxygen, this is bio btw :)

Given that the volume of the pure water is 480 mL and the mole of HCl added to the water is 2×10¯² mole. Therefore, the Initial and final pH of the water are:

1. The initial pH of the pure water is 7

2. The final pH of the water is 1.38

This is simply a measure of the acidity / alkalinity of a solution.

The pH measures the hydrogen ion concentration while the pOH measures the hydroxide ion concentration

The pH scale is a scale that gives an understanding of the variation of the acidity / alkalinity of a solution.

The scale ranges from 0 to 14 indicating:

Molarity = mole / Volume

Molarity = 2×10¯² / 0.48

Molarity = 4.17×10¯² M

HCl(aq) —> H⁺(aq) + Cl¯(aq)

From the balanced equation above,

1 mole of HCl contains 1 mole of H⁺

Therefore,

4.17×10¯² M HCl will also contain 4.17×10¯² M H⁺

pH = –Log H⁺

pH = –Log 4.17×10¯²

pH = 1.38

Learn more about pH:

https://brainly.com/question/3709867

Answer:

advantages:

. The error due to weighing the solute can be minimised by using concentrated stock solution that requires large quantities of solute. 2. We can prepare working standards of different concentrations by diluting the stock solution which is more efficient since consistency is maintained

3. Some of the concentrated solutions are more stable and are less likely to support microbial growth than working standards used in the experiments.

For the ionization constant for acetic acid is 1.8 x 10-5; that for hydrocyanic acid is 4 x 10-10, The solution is basic due to the generation of OH– ions.

ionization constant is simply defined as a constant that relies on the equilibrium that exists b/w ions and molecules of solution.

Generally, the equation for the Chemical reaction  is mathematically given as

CH3C.O .O + H2_O ----> CH3COOH + O.H

Therefore

the anion C...N–  receives H+ ion from water as it goes through hydrolysis.

Hence

xN– + H2..O ----><---- HxN + O..H–

In conclusion, The solution is basic due to the generation of OH– ions.

Read more about Chemical reaction

https://brainly.com/question/16416932

Answer:

8

Explanation:

2MgSO4

We see there are 4 atoms, but these are multiplied by 2, therefore 8 atoms of oxygen.

Answer:

it is 4.

Explanation:

four atoms of oxygen (O)

four atoms of silicon (Si)

two atoms of magnesium (Mg)

two atoms of oxygen (O)

Answer:

6 moles of Cl2

Explanation:

First, the equation has to be balanced, which makes it 4 FeCl3 + 3 O2 --> 2 Fe2O3 + 6 Cl2

Using this information, we can see that one mole of O2 will not be present in the reaction. Since four moles of FeCl3 are needed to react in the equation, which would produce six moles of Cl2, and only four moles of FeCl3 are present, six moles of Cl2 would be produced.

Answer: 0.5 M

Explanation:

molarity is defined as [tex]\frac{mol}{L}[/tex]

in the question, we are already given the amount of moles of Ba+ and L of water. we can just plug it into the equation, [tex]\frac{1}{2}[/tex].

thus, the molarity will be 0.5 M

hope this helped! ♡

The hydronium and hydroxide concentrations of a solution that is 5.0 x 10-3 M H2SO4 is 2.7.

PH is the degree of alkalinity and acidicity in a solution.

From the question,

pH= -log[H+] - (i)

10^-3=H2So4

H+= 2×10-3

here ,

h2so4 ——— 2[H+] + so4^2-

thus [H+]= 2*10^(-3) because hydrogen ion has two moles

pH= -log[H+]

pH= -log(2×10^-3)

pH= 3-log2

pH= 3-log2pH= 2.7

The pH is 2.7

Therefore, The hydronium and hydroxide concentrations of a solution that is 5.0 x 10-3 M H2SO4 is 2.7

Learn more about pH from the link below.

https://brainly.com/question/13557815

Answer:

mf i was trying to

find out the same thing

Explanation:

Answer:

Zone A

Explanation:

Because, when facing the sun, the "A" zones would be furthest from the sun, they get the least amount of sunlight (also shows why they are the coldest parts).

Answer:

The bond strength of an acid generally depends on the size of the 'A' atom: the smaller the 'A' atom, the stronger the H-A bond. When going down a row in the Periodic Table (see figure below), the atoms get larger so the strength of the bonds get weaker, which means the acids get stronger.

Explanation:

The acid that is strongest of the following is HNO₃ and the acid that produces the lowest concentration of hydronium ions per mole of acid is HF.

Strong acids are completely dissociated into a solution.

Examples of strong acids are Hydrochloric acid, sulfuric acid, nitric acid, etc.

Weak acids are those that do not completely dissociate in a solution.

Examples are formic acid, acetic acid, nitrous acid, etc.

Thus, the acid that is strongest of the following is HNO₃ and the acid that produces the lowest concentration of hydronium ions per mole of acid is HF.

Learn more about acids

https://brainly.com/question/14072179

#SPJ4

neutral particles since they do not posses any charge

Answer:

I believe is the correct answer

Explanation:

NaCl made,2(NaCl)or2NaCl,Na2Cl,NaCl2 all represent compounds

Answer:

Adding Catalyst can Speed up a Chemical reaction

Answer: catalyst

Explanation:

a catalyst is a substance that helps speed up chemical reactions.

hope this helped! ♡

Answer:

before the substance was a gas it was a liquid.

Explanation:

Answer:

sulfur

Explanation:

sulfur has 4p electrons.

phosphorus has 3p electrons.

The question is asking which one has 4

The element in the third period (row) of the periodic table with a total of 4 3p electrons is sulfur (S).

Sulfur is a chemical element that is present in the third of the periodic table.

Its atomic number is 16.

The electronic configuration of sulfur is [tex]\rm [Ne]\; 3S_2\; 3P_4[/tex]

So, sulfur contains 4 electrons in its last orbital.

Thus, the element in the third period (row) of the periodic table with a total of 4 3p electrons is sulfur (S).

Learn more about sulfur

https://brainly.com/question/13469437

#SPJ4

Burette is the lab equipment used to estimate the volume of liquid during titration. The volume is measured by the bottom meniscus to the nearest 0.01 mL.

Burette is an instrument used in quantitative analysis like the volume of the sample in the titration methods and is made of a glass tube.

In the volumetric analysis, the final volume of the liquid is measured by locating the lower meniscus and is taken approximately near 0.01 ml as the burettes have markings of 0.1 mL.

Therefore, option a. locate the bottom meniscus and mark nearest to 0.01 mL.

Learn more about meniscus here:

https://brainly.com/question/4070509

Answer: D. 7.71 x 10^24

Explanation:

12.8 moles CO2 (6.02 * 10^23 molecules / 1 mol) = 7.7 * 10^24 molecules :)

Answer:

Reaction

Explanation:

A reaction that is spontaneous at low temperature