Answer:
I'm not sure it is c I'm sure it is d
Object A and Object B have the same volume of 10 cm³. Object A has a mass of 20 grams. Object B has a mass of 50 grams. Which object will have the greater density and why?
Answer:
Object B has greater density
desity A=20/10=2 g cm^-3 . density B=50/10=5 g cm^-3
the object that has greater mass has the greater density because the volume of the those two objects are same
What kind of image is formed by an object that is placed beyond the center of curvature on the principal axis of a concave mirror?
A.
real, inverted, the same size as the object, and at the same distance as the object
B.
real, inverted, larger than the object, and farther from the mirror than the object
C.
virtual, upright, left-right reversal, the same size as the object, and at the same distance as the object
D.
real, inverted, smaller than the object, and closer to the mirror than the object
E.
virtual, upright, larger than the object, and farther from the mirror than the object
Answer:D.
Real, inverted, smaller than the object, and closer to the mirror than the object
Explanation: Real images will be inverted. As it is beyond the centre of curvature it is also beyond 2F which means that the image is inside the centre of curvature ( between F and 2F from the mirror ) As the image is closer to the mirror than the object it must be diminished in size
During a chemical reaction, some substances are completely consumed while others my not be. What is the substance that is completely consumed in a chemical reaction?
Question 3 options:
reactant
product
a limiting reactant
Answer:
It is Limiting Reactant
Explanation:
Which of the following best describes a nebula?
Explanation:
is a formation in space which is constituted mostly of helium, dust and other gases in various concentration
why stationary magnet inside a coil does not induce a electric current
A car accelerates at a rate of 13m/s^2[S]. If the car's initial velocity is 120km/h[N]. What will its final velocity be in m/s, after two seconds.
Answer:
the final velocity of the car is 59.33 m/s [N]
Explanation:
Given;
acceleration of the car, a = 13 m/s²
initial velocity of the car, u = 120 km/h = 33.33 m/s
duration of the car motion, t = 2 s
The final velocity of the car in the same direction is calculated as follows;
v = u + at
where;
v is the final velocity of the car
v = 33.33 + (13 x 2)
v = 59.33 m/s [N]
Therefore, the final velocity of the car is 59.33 m/s [N]
When will electric charges flow?
A. When the circuit is open.
B. When the circuit is incomplete.
C. When the circuit is closed.
D. When the switch is off.
Answer:
A
Explanation:
ABC
Question 18
A 110-kilogram bodybuilder and his 55-kilogram friend run up identical flights of stairs. The bodybuilder reaches the top
in 4.0 seconds while his friend takes 2.0 seconds. Compared to the power developed by the bodybuilder while running
up the stairs, the power developed by his friend is which of the following?
А
twice as much
B
the same
с
half as much
D
four times as much
Answer:
The answer is option C.Half as much
The correct answer is four times as much.
Let the friend's mass be m, then according to the question the bodybuilder's mass will be 2m.
Now they both cover the same distance but the bodybuilder takes 4s and his friend takes 2s. Hence, if the time taken by the friend is t then the bodybuilder takes 2t time.
That means if the velocity of the bodybuilder is v then the velocity of his friend will be 2v.
Now, Power is defined as the rate of work done.
P = W/t
and work done is the change in kinetic energy.
Now the power generated by the bodybuilder is:
[tex]P_{b}=\frac{\frac{1}{2}2mv^{2} }{2t} \\\\P_b=\frac{mv^2}{2t}[/tex] ............(1)
power generated by the friend is :
[tex]P_{f}=\frac{\frac{1}{2}m(2v)^{2} }{t} \\\\P_b=\frac{4mv^2}{2t}[/tex].............(2)
Comparing (1) and (2) we get:
The friend generates four times as much power as the bodybuilder.
Learn more:
https://brainly.com/question/4232216
(c) Another spring has a spring constant of 250 N/m.
Calculate the work done in stretching the spring by 0.30 m.
State the unit.
Use the equation
E = 12 x K x x2
Tyra made the following bar graph shown to represent the relative distances of four different astronomical bodies from Earth.
The title of the bar graph is Distance of Bodies in Space from Earth. Four bars are labeled A, B, C, and D. Bar C is the shortest. Bar D is about three times the size of bar C. Bar A is about six times the size of bar C. Bar B is about eight times the size of bar C.
If D represents Mercury, which of the following could be represented by B and C?
B could be the moon, and C could be Venus.
B could be Venus, and C could be the moon.
B could be the moon, and C could be Jupiter.
B could be Jupiter, and C could be the moon.
Answer: D
Choice A calls B the moon which is incredibly tiny compared to Venus so this is wrong, choice B calls B Venus which is a relatively small planet and C the moon... that is a bit overkill so no. Choice C says B is the moon and C is Jupiter, Jupiter being the largest planet this is a easy no, leaving D to be the only logical and correct answer.
Explanation: MARK ME BRAINLIEST PLZZZZZZZZZZzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz
Answer: Answer D. because B. Jupiter is the farthest from Earth from those answer choices and C. is the moon because it is the closest out of those answer choices.
So, the answer is D: B could be Jupiter, and C could be the moon.
Explanation: Please give Brainlist.
Hope this helps!!!!
A(n) _______ studies physical components and characteristics of celestial objects.
The answer is ASTROPHYSICIST!
Answer:
Astronomers?
Explanation:
Answer:
Astrophysicist?
Explanation:
Where was the first FIFA World Cup held?
(HINT: The host country won the tournament
Answer:
The 1930 FIFA World Cup was the inaugural FIFA World Cup, the world championship for men's national association football teams. It took place in Uruguay from 13 to 30 July 1930.
Explanation:
hope it helps if so pls give it the brainliest answer
Answer:
[tex]\huge\boxed{Uruguay\hookleftarrow}[/tex]
⎇ The first FIFA World Cup Championship took place in Uruguay from from 13 July 1930 to 30 July 1930.
a sample contains 110 g of a radioactive isotope. how much radioactive isotope will remain in the sample after 1 half-life?
a. 100g
b. 25 g
c. 75 g
d. 50 g
Answer:
The half-life of a radioactive isotope is the time such that the initial amount of the isotope is reduced to its half.
Thus, if we start with A grams of a given radioactive isotope, after a 1 half-life, we will have A/2 grams of the radioactive isotope.
In this case, we know that the sample has 110g of a radioactive isotope.
Then, after 1 half-life, we should have half of 110g, which is:
110g/2 = 55g
Then we should have 55 g of a radioactive isotope.
The answer that is closer to this result is option d (50 g), so that is the correct one.
A proton is released from rest in a uniform E – Field 8 x 104V/m directed alomg + ve x – axis, undergoes a displacement of 0. 5m in direction of field. Find: a) Change of potential for this displacement (A =» B)? B) Change of P.E for this displacement (A =» B)? C) The speed of proton after the displacement?
Answer:
a. -40 kV b. -6.408 fJ c. 2.77 × 10⁶ m/s
Explanation:
a) Change of potential for this displacement (A =» B)?
The potential energy change ΔV = -EΔx where E = electric field strength = 8 × 10⁴ V/m and Δx = displacement of charge = 0.5 m
So, ΔV = -EΔx
ΔV = -8 × 10⁴ V/m × 0.5 m
ΔV = -4 × 10⁴ V
ΔV = -40 × 10³ V
ΔV = -40 kV
B) Change of P.E for this displacement (A =» B)?
The change in potential energy ΔU = qΔV where q = proton charge = +1.602 × 10⁻¹⁹ C and ΔV = change in potential = -4 × 10⁴ V
So, ΔU = qΔV
ΔU = +1.602 × 10⁻¹⁹ C × -4 × 10⁴ V
ΔU = -6.408 × 10⁻¹⁵ J
ΔU = -6.408 fJ
C) The speed of proton after the displacement?
From the conservation of energy,
The electric potential energy change of the charge equals its kinetic energy change
ΔK + ΔU = 0
ΔK = -ΔU
ΔK = -(-6.408 × 10⁻¹⁵ J)
K₂ - K₁ = 6.408 × 10⁻¹⁵ J
where K₁ = initial kinetic energy of proton = 0 J (since it starts from rest)
K₂ = final kinetic energy of proton = 1/2mv² where m = mass of proton = 1.673 × 10⁻²⁷ kg and v = speed of proton
K₂ - K₁ = 6.408 × 10⁻¹⁵ J
1/2mv² - 0 = 6.408 × 10⁻¹⁵ J
1/2mv² = 6.408 × 10⁻¹⁵ J
v² = 2(6.408 × 10⁻¹⁵ J)/m
v = √[12.816 × 10⁻¹⁵ J)/1.673 × 10⁻²⁷ kg]
v = √[7.66 × 10¹² J/kg]
v = 2.77 × 10⁶ m/s
Help please!!
What are the three criteria that determine if a wave is a sound wave?
Answer:
Wavelength, Amplitude, Time-Period, Frequency and Velocity or Speed.
Explanation:
Sound wave can be described by five characteristics: Wavelength, Amplitude, Time-Period, Frequency and Velocity or Speed. The minimum distance in which a sound wave repeats itself is called its wavelength. That is it is the length of one complete wave
Answer: Sound wave can be described by five characteristics: Wavelength, Amplitude, Time-Period, Frequency and Velocity or Speed.
Explanation:
The minimum distance in which a sound wave repeats itself is called its wavelength. That is it is the length of one complete wave.
The upper layer of soil consisting of rock particles, water, air, and organic matter is the
Answer: Bedrock
Explanation:
Bedrock is the solid layer of rock beneath the soil. Soil is a mixture of rock particles, minerals, decayed organic material, air, and water. The decayed organic material in soil is humus, a dark-colored substance that forms as plant and animal remains decay.
Task: At the end of the lesson you will be asked to develop a final writing assignment on the environmental problerns
caused by invasive e algae e, and the methods used to restore the natural habitats e in Crystal River and Kings Bay,
ments
Essay Response: (3 Paragraphs)
5
• Describe the environmental problem caused by invasive algae in these areas and the goals of the Save Crystal River
project.
• Explain the steps in the process used to correct the problem.
. Finally, conclude with why the information gathered during the Save Crystal River project is important to the
environment now and to future generations,
If someone can answer this fast I will mark as brainlist and give them 100 points plzz I need the answer fast and right!!
Answer:
PLS PLS PLS mark brainliest
Explanation:
The following are the environmental problems caused by the invasive algae which is known as Lyngbya.
A. It blocks the sunlight from reaching the water, thereby depriving the plants in the water from accessing it. So they won't be able to manufacture their foods and eventually die off.
B. The algae produce offensive odour like rotten egg , which drive people and other organisms away.
C. The algae prevent oxygen from entering the water, and prevent the resident organisms from making use of it, which leads to their death.
D. The algae also give off heat into the chilly spring waters.
In conclusion, the goals of the Crystal River project is to save the living organisms in the river from extinction and to make it a livable environment for them.
What is the product of an oxidation reaction?
Ozone
Oxygen
Oxide
Answer:
Oxide
Explanation:
Ozone and oxygen are oxidising agents
[tex]O _{3} \: \: ozone \\ \\ O _{2} \: \: oxygen[/tex]
Answer:
Oxygen
Explanation:
The name oxidation actually originates from the word oxygen so the question answers it's self.
In case you don't know what oxidation is:
Oxidation occurs when an atom, molecule, or ion loses one or more electrons in a chemical reaction. When oxidation occurs, the oxidation state of the chemical species increases. Oxidation doesn't necessarily involve oxygen! Originally, the term was used when oxygen caused electron loss in a reaction.
Have a great day <3
Part II. True or False 1. Bernoulli's principle is a statement of energy conservation in static fluids. 2. For most solids, the coefficient of volume expansion is proportional to the coefficient of linear expansion. 3. Latent heat of a material does not affect the amount of heat transfer across a slab by conduction. 4. If the net force acting upon a body is zero, the particle is always at rest. 5. A football kicked at an angle 0 with respect to the horizontal means that the acceleration is 9.8m/s2 at all times. 6. Equilibrant force is the combination of all the forces acting on an object. 7. Reflection occurs when there is the presence of medium where light can travel. 8. Diverging Lenses always have negative focal length. 9. The total mechanical energy in the system must always be equal to zero. 10. Electric field is the strongest when it is close to the charged particle creating the field.
Answer:
True 1, 2,3, 6, 8 and 10
False 4, 5, 7 and 9
Explanation:
In this exercise, several situations will be analyzed, to know if they are true/false
1) True. Bernoulli's equation is the conservation of energy
2) True. The volumetric expansion is approximately 4 times the linear expansion
3) True. Latent heat is the heat used in a phase transformation and does not change the temperature of the body and the conduction is proportional to the change in temperature.
4) False. The particle can be at rest or at constant velocity
5) False. Acceleration depends on the force of the kick
6) True. The sum of force must be zero
7) False. Reflection occurs at the interface between two different media
8) True. Diverging lenses the focal length is negative
9) False. Manganic energy is the sum of the energies, therefore it must be different from zero
10) True. The electric field is inversely propositional to the square of the distance
Help please, with #18, it’s a basketball question
Answer: D
Explanation:
Answer:
C. A lob pass.
Hope this helps!!
For every 120 joules of energy input a car wastes 85 joules , find the useful energy output of the car ?
Answer:
35 Joules
Explanation:
Applying
Input Energy(Q) = Useful energy output(U)+Wasted Energy(W)
Q = U+W.............................. Equation 1
Make U the subject of the equation
U = Q-W................... Equation 2
From the question,
Given: Q = 120 Joules, W = 85 Joules
Substitute these values into equation 2
U = 120-85
U = 35 Joules
Can anyone answer this its a science question NO LINKS!!!
Answer:
The correct answer is C I took the mastery test
Explanation:
Answer:
d last one
Explanation:
A monochromatic beam of light has a frequency of 6.5 x 10" hertz. What color is the light?
O orange
O yellow
O violet
O blue
Answer:
violet
Explanation:
See the picture and Anwser This
Answer:
20 m/s
Explanation:
Look at the time on the x-axis. Go up from 2 seconds until you reach a point. From that point go to the left and read from the y-axis.
How does the motion of the atoms in the spoon change when the spoon is placed in the hot coffee?
А
The atoms vibrate faster due to the conduction of heat through atoms in the spoon.
B
The atoms vibrate slower due to the conduction of heat through atoms in the spoon
С
The atoms move closer toward each other due to the radiation of heat through atoms in the spoon.
D
The atoms move away from each other due to the convection of heat through atoms in the spoon.
Answer:
A.The atoms vibrate faster due to the conduction of heat through atoms in the spoon.
Which of these scenarios describes circular motion?
es )
A)
The moon orbiting the Earth
B)
A cannonball flying from a cannon
C)
A car moving along a straight track
D)
The pendulum of a grandfather clock
A)
The moon orbiting the Earth
A projectile is launched from the ground with an initial velocity of 12ms at an angle of 30° above the horizontal. The projectile lands on a hill 7.5m away. The height at which the projectile lands is most nearly
A- 1.78m
B- 3.10m
C- 5.34m
D- 6.68m
E- 12.0m
Answer:
A. 1.78 m
Explanation:
Given;
initial velocity of the, u = 12 m/s
angle of projection, θ = 30°
the range of the projectile, R = 7.5 m
To obtain the height through which the projectile lands, we must calculate the maximum height reached by the projectile.
[tex]H = \frac{u^2\ sin^2\theta}{2g} \\\\H = \frac{(12)^2\times (sin(30))^2}{2 \times 9.8} \\\\H = \frac{144 \times (0.5)^2}{19.6} \\\\H = 1.84 \ m[/tex]
Therefore, the height is most nearly 1.78 m
A student uses 80 joules of energy to lift a backpack in a time of 0.75 seconds. How much power
does the student have?
Answer:
P = 106.7 W
Explanation:
Given that,
Work done in lifting a backpack, W = 80 J
It is lifted in 0.75 seconds
We need to find the power of the student. The power of an object is defined as work done per unit time. So,
[tex]P=\dfrac{W}{t}[/tex]
Put all the values,
[tex]P=\dfrac{80}{0.75}\\\\P=106.7\ W[/tex]
So, the power of the student is 106.7 W.
morse code and string phone cup
1.What was different about the two methods?
2.If your string phone stretched out one block long, which method do you think would be clearer?
3. If you had a Morse Code expert on both ends to act like a computer taking in information, would that make a difference?
Answer:
Following are the responses to the given question:
Explanation:
Following are the difference in the speed and accuracy:
The biggest difference was its tone between both the cup method as well as the Morse code. One should talk using cup system and sequence system and let its covering be understood in Morse code, just a series of beeps weren’t tangible... Secondly, a method of cup involves a range string. Rukun Negara is often distributed by cable, but this is a greater range. It reaches concurrently in those other areas.
In the case of using the string method for the block, its distance and stiffness of the string are limited and the barriers are eliminated. It will certainly be convenient and clearer if one utilizes Sign language.
If two experts are acting like such a machine on both sides, their information between both the 2 persons is smoother and quicker as they will not have to wait for data from a third person which may create another pause at the time.
Morse code is faster, eventually. For some very small periods when sensitive information is not transmitted, strings or cup methods must be reserved.
¿Crees que a más horas de sueño mayor descanso?
Answer:
La mayoría de los adultos necesitan entre 7 y 8 horas de sueño de buena calidad en un horario uniforme todas las noches.
Explanation: