Help please and explain elaborately thanks in advanced

Help Please And Explain Elaborately Thanks In Advanced

Answers

Answer 1

Answer:

So overall, motion and interference of matter are needed equally for friction, which is held together by the force of gravity. Without gravity, everything would have fly away in the universe, and the friction would not have exist. Hence, friction is dependent on gravity.

Elaborately means in a detailed and carefully arranged manner.

Explanation:

hope this helps!!!!


Related Questions

A delivery drone uniformly slowed down from 45 m/s to 23 m/s in a straight line over a 30-minute duration within a 16-kilometer radius of its warehouse. What was the magnitude of its average acceleration?
A. 1.2 x 10^−2 m/s^2
B. 5.3 x 10^−1 m/s^2
C. 7.3 x 10^−1m/s^2
D. 4.4 x 10^1 m/s^2

Answers

I think it is letter A

a spring balance used to weigh candy is built with a spring the spring stretches 3.00 cm when a 15 n weight is placed in the pan. when the weight is replaced with 3 kg of candy, what distance will the spring stretch?
a.7.0 b.4.5 c.3.8 d.5.9

Answers

Answer: 5.9cm

Explanation:

15N/3cm=5

Convert 3kg to N (29.42N)

Use the 5 from earlier to divide 29.42/5=5.884

Round to 5.9

5.9cm is the answer

(I don’t know if I solved this the correct way but I got it right. 5.9 is the correct answer)

Using the graphs on your notes, how are wavelength and frequency related to sound waves? Make sure to use proper terminology in your response.

Answers

The higher the frequency of sound waves the shorter their wavelength. This presumes that sound waves in air have almost a constant speed of around 330 m/s

Give me an example of heterogeneous mixture

Answers

Answer:

oil and water

Explanation:

write any three rules two keep in in mind while using SI units​

Answers

Answer:

Rules and conventions for writing SI units and their symbols

The units named after scientists are not written with a capital initial letter. ...

The symbols of the units named after scientist should be written by a capital letter. ...

Small letters are used as symbols for units not derived from a proper name

Explanation:

Hope this helps u

Crown me as brainliest:)

Answer:

when temperature is expressed in Kelvin,the degree sign is omitted.

only accepted symbols should be used.

some space is always to be left between the number and the symbol of the unit and also between the symbols for compound units such as force,momentum, etc.

non examples of kinetic energy

Answers

Answer:

Anything that isn't moving

3. An earthquake measures 3 on Richterscale:
(i)Would it be recorded by a seismograph ?
(ii)ls it likely to cause much damage ?​

Answers

Answer:

Yes, it would be recorded by a seismograph. The earthquake with magnitude of 3 on Richter Scale is not likely to cause much damage

The anther and filament are parts of a flower's:

stamen

petal

pistil

stigma

Answers

A the stamen :)). haha yea smert

How does changing the force affect the sound?

Answers

Answer:

From a sound standpoint, higher tracking force reduces all other things being equal which might reduce the top end a bit and increase bass.

The speed of an object undergoing constant acceleration increases from 8.0 m/s to 12.0 m/s in 10.0 seconds. How far does the object travel during the
10.0 seconds?
4 m
100 m
800 m
10 m

Answers

Answer:

is the question finnished

Explanation:

if your mass is 72kg your textbooks in Madison has 3.7 kg and you and your textbook are separated by a distance of 0.33 M what is the gravitational force between you and your textbook

Answers

Answer:

1.63 X 10^-7N

Explanation:

who has a iphone (age range 15-19 )

Answers

Hi friend! I have an iPhone. why do you ask????

Which action describes the first step in both scientific investigation and technological design?

researching how solar panels work
identifying a need for a solar panel
communicating to the team that solar panels are easy to install
designing a solution by sketching a prototype for a solar panel

Answers

Answer:

The best answer would be D

Explanation:

This would be best because if you sketch about an object or thing you are making it can help you better picture what you are making or someone else therefore the answer is D

Answer:

Answer is D fs

Explanation:

*designing a solution by sketching a prototype for a solar panel*

I need help because I don’t understand that question

Answers

I think you multiple both of them, give me a second and I’ll figure it out!

What is the weight of a 328N emperor penguin?

Answers

Answer:

Weight = 3217.68

Explanation:

N times Gravity = weight

Gravity= 9.81

The weight of the emperor penguin whose mass is 328 Kg on is 3214.4 Newtons.

What is Weight ?

Weight is the force exerted by the earth on an object at the surface of the earth. Mathematically -

W = m x g

where -

[m] is the mass of object

[g] is acceleration due to gravity

Given is the mass of an emperor penguin as 328 Kg.

We can write -

Mass [m] = 328 kg

Acceleration due to gravity [g] = 9.8 m/s²

Therefore, the weight of the emperor penguin will be

W[P] = m x g = 328 x 9.8 = 3214.4 Newtons

Hence, the weight of the emperor penguin whose mass is 328 Kg on is 3214.4 Newtons

To solve more questions on Mass and weight, visit the link below-

brainly.com/question/13429205

#SPJ2

What happens to particle spacing when temperature increase, What we call this process?

Answers

Answer:

The atoms start vibrating really fast, making the space between them larger. It's an increase in Kinetic Energy.

A marble accelerates from rest at a constant rate .it travels 36 m in 12.0 sec what’s is it’s final velocity and what was the acceleration

Answers

Answer:

a = 0.50 m/s²

v = 6.0 m/s

Explanation:

Step 1: Given data

Initial velocity (u): 0 m/s (rest)Displacement of the marble (s): 36 mTime elapsed (t): 12.0 sFinal velocity (v): ?Acceleration (a): ?

Step 2: Calculate the acceleration

We will use the following suvat equation.

s = u × t + 1/2 × a × t²

s = 0 × 12.0 s + 1/2 × a × (12.0 s)²

36 m = a × 72.0 s²

a = 0.50 m/s²

Step 3: Calculate the final velocity

We will use the following suvat equation.

v = u + a × t

v = 0 + 0.50 m/s² × 12.0 s

v = 6.0 m/s

[04.05] An atom has an atomic number of 12 and a mass number of 25. How many neutrons does the atom have?​

Answers

Answer: is  13

Explanation:

What state of matter has the highest energy? Lowest?

Answers

Answer:

The highest state of matter in energy is gas. The lowest is solid.

Explanation:

The reason why is because gas is the highest conductor of electricity (which is why we have lightning). However, solids don't conduct electricity very well.

Jack took up the job of a front desk staff at a reputed hotel. He will be interacting with various customers and employees from different parts of the world. What should his manager do to help Jack adapt to a diverse workplace? The manager is quite impressed with Jack. He wants to encourage Jack to actively listen and explore all solutions. He also wants to train Jack to avoid using I-statements and encourage him to participate in programs that teach him more about his own ethnic group. In addition, the manager wants to help Jack to understand the customs of other cultures.

Answers

Answer:

a. He wants to encourage Jack to actively listen and explore all solutions.

d. the manager wants to help Jack to understand the customs of other cultures.

Explanation:

As a front desk staff of the hotet, jack has to learn to activel listen, and explore all solutions available within his reach when deali with customers.

Because he is the first point of contact in the hotel as the front desk officer, this means he would get to interact with people of diverse cultures, customs e.t.c. Jack needs to learn and understand this cultures.

energy
Potential energy + Kinetic energy
OA) Heat
OB) Chemical
Electrical
OD) Mechanical

Answers

i think the answer may be D- mechanical
The answer is OD) Mechanical

What's the time it takes a car to attain the speed of 30 m/s when accelerating from rest at 2 m/s (squared)
A- 15 s
B- 2 s
C- 60 s
D- 30 s
E- none

Answers

The answer is A - 15s

Two children fight over a toy. One pulls with a force of 8N to the right. The other pulls with
a force of 6N to the left. What is the strength and direction of the net force on the toy?

Answers

Answer: To the right

Explanation:

8n is more strength then 6n periodt pooh ✨

When two children fight over a toy. One pulls with a force of 8N to the right. The other pulls with a force of 6N to the left then the net force on the toy would be 2 N to the right.

What is Newton's second law?

Newton's Second Law states that The resultant force acting on an object is proportional to the rate of change of momentum.

The mathematical expression for Newton's second law is as follows

F = ma

As given in the problem, two children fight over a toy. One pulls with a force of 8N to the right. The other pulls with a force of 6N to the left.

Net force = 8 - 6

                = 2 Newtons

Thus, the net force of the toy comes out to be 2 Newtons.

Learn more about Newton's second law here, refer to the link;

brainly.com/question/13447525

#SPJ2

What was the instantaneous speed of Bear A at 5 seconds in meters/min? (No unit conversions necessary, no units required for answer).

Answers

Answer:

Answer: The answer is 40.

Explanation: There is a typo, they mean 5 minutes. Five minutes is the line between zero and 10, and the dot matches up at 5 and 200. 200 divided by 5= 40.

(i got this answer from: https://brainly.com/question/18253554)


A ninja applies a force of 1250-N to a piece of 4-inch solid oak with his fist. What is the size of
the force applied to the fist by the piece of oak?

Answers

Answer:

The force is 1250-N

Explanation:

Generally according to Newtons third law , which states that for every action there is an equal and opposite reaction

 Now considering the question, the action here is the force applied by the ninja while the reaction is the force applied by the oak and from Newton law both of these action are equal but opposite to each other.

Hence the force applied by the the piece of oak on the fist is 1250 N

A force of 6.0 N is applied horizontally to a 3.0 kg crate initially at rest on a horizontal frictionless surface. After the crate is pushed for 1.5 seconds, it has a gelocity of 3.0 m/s. Does this support Newton’s second law of motion, that force equals mass times acceleration?

Answers

Your answer to your question is 6.9 m/s

A 8 g of iron shot is added to a graduated cylinder containing 46 mL of water. The water level rises to the 49 mL mark, from this information, calculate the density of iron

Answers

Answer:

The answer is 2.67 g/mL

Explanation:

The density of a substance can be found by using the formula

[tex]density = \frac{mass}{volume} \\[/tex]

From the question

mass of iron = 8 g

volume = final volume of water - initial volume of water

volume = 49 - 46 = 3 mL

We have

[tex]density = \frac{8}{3} \\ = 2.666666...[/tex]

We have the final answer as

2.67 g/mL

Hope this helps you

Pregunta 2
George took his puppy to a dog park and unleashed her once they entered the gate. The puppy accelerated Northward, from rest, to 15 meters per second in 10
seconds. What was China's displacement in this time interval?

Answers

it was the time interval and the chinas displacement

The heat loss from a boiler is to be held at a maximum of 900Btu/h ft2 of wall area. What thickness of asbestos (k= 0.10 Btu/h ft ℉) is required if the inner and outer surfaces of the insulation are to be 1600 and 500℉, respectively? Now if a 3-in.-thick layer of kaolin brick (k= 0.07 Btu/h ft ℉) is added to the outside of the asbestos, what heat flux will be result if the outside surface of the kaolin is 250℉? What will be the temperature at the interface between the asbestos and kaolin for this condition?

Answers

Answer:

a. 0.122 ft b. -70 Btu/h ft² c. 633.33 °F

Explanation:

a. Since the rate of heat loss dQ/dt = kAΔT/d where k = thermal conductivity, A = area, ΔT = temperature gradient and d = thickness of insulation.

Now [dQ/dt]/A = kΔT/d

Given that [dQ/dt]/A = rate of heat loss per unit area = -900Btu/h ft², k = 0.10 Btu/h ft ℉(for asbestos), ΔT = T₂ - T₁ = 500 °F - 1600 °F = -1100 °F. We need to find the thickness of asbestos, d. So,

d = kΔT/[dQ/dt]/A

d = 0.10 Btu/h ft ℉ × -1100 °F/-900Btu/h ft²

d = 0.122 ft

b. If the 3 in thick Kaolin is added to the outside of the asbestos, and the outside temperature of the asbestos is 250℉, the heat loss due to the Kaolin is thus

[dQ/dt]/A = k'ΔT'/d'

k' = 0.07 Btu/h ft ℉(for Kaolin), ΔT' = T₂ - T₁ = 250 °F - 500 °F = -250 °F and d' = 3 in = 3/12 ft = 0.25 ft

[dQ/dt]/A = 0.07 Btu/h ft ℉ × -250 °F/0.25 ft

[dQ/dt]/A  = -70 Btu/h ft²

c. To find the temperature at the interface, the total heat flux equals the individual heat loss from the asbestos and kaolin. So

[dQ/dt]/A = k(T₂ - T₁)/d + k'(T₃ - T₂)/d' where  [dQ/dt]/A = -900Btu/h ft², k = 0.10 Btu/h ft ℉(for asbestos), k' = 0.07 Btu/h ft ℉(for Kaolin), T₁ = 1600 °F, T₂ = unknown and T₃ = 250℉.

Substituting these values into the equation, we have

-900Btu/h ft² = 0.10 Btu/h ft ℉(T₂ - 1600 °F)/0.122 ft + 0.07 Btu/h ft ℉(250℉ - T₂)/0.25 ft

-900Btu/h ft² = 0.82 Btu/h ft ℉(T₂ - 1600 °F) + 0.28Btu/h ft ℉(250℉ - T₂)

-900 °F = 0.82(T₂ - 1600 °F) + 0.28(250℉ - T₂)

-900 °F = 0.82T₂  - 1312°F + 70 °F - 0.28T₂

collecting like terms, we have

-900 °F + 1312°F - 70 °F = 0.82T₂   - 0.28T₂

342 °F = 0.54T₂

Dividing both sides by 0.54, we have

T₂ = 342 °F/0.54

T₂ = 633.33 °F

The thickness of asbestos required is 0.122 ft.

The heat flux will be -70 Btu/h ft²

And the temperature of the interface is 633.33 °F.  

(i) the rate of heat loss :

dQ/dt = kAΔT/d

where k = thermal conductivity, A = area, ΔT = temperature gradient, and

d = thickness of insulation.

[dQ/dt]/A = kΔT/d

Given that [dQ/dt]/A = rate of heat loss per unit area = -900Btu/h ft²,

k = 0.10 Btu/h ft ℉,

ΔT = 500 °F - 1600 °F = -1100 °F

We have to find the thickness of asbestos that is d.

d = kΔT/[dQ/dt]/A

d = 0.10 Btu/h ft ℉ × -1100 °F/-900Btu/h ft²

d = 0.122 ft is the thickness required.

(ii) a 3-in thick Kaolin is added to the outside of the asbestos

outside temperature of the asbestos is 250℉,

the heat loss due to the Kaolin is:

[dQ/dt]/A = k'ΔT'/d'

k' = 0.07 Btu/h ft ℉(for Kaolin), ΔT' = T₂ - T₁ = 250 °F - 500 °F = -250 °F and d' = 3 in = 3/12 ft = 0.25 ft

[dQ/dt]/A = 0.07 Btu/h ft ℉ × -250 °F/0.25 ft

[dQ/dt]/A  = -70 Btu/h ft²

(iii) temperature at the interface

the total heat flux :

[dQ/dt]/A = k(T₂ - T₁)/d + k'(T₃ - T₂)/d'

where  [dQ/dt]/A = -900 Btu/h ft²,

k = 0.10 Btu/h ft ℉  (for asbestos),

k' = 0.07 Btu/h ft ℉  (for Kaolin),

T₁ = 1600 °F and T₃ = 250℉.

-900 = 0.10(T₂ - 1600 °F)/0.122 + 0.07(250℉ - T₂)/0.25

-900 = 0.82(T₂ - 1600 °F) + 0.28(250℉ - T₂)

-900 °F = 0.82(T₂ - 1600 °F) + 0.28(250℉ - T₂)

-900 °F = 0.82T₂  - 1312°F + 70 °F - 0.28T₂

-900 °F + 1312°F - 70 °F = 0.82T₂   - 0.28T₂

342 °F = 0.54T₂

Dividing both sides by 0.54, we have

T₂ = 342 °F/0.54

T₂ = 633.33 °F

Learn more:

https://brainly.com/question/3102316

Which of the following is an example of a properly written testable hypothesis? *

A people should taste this new health food and see whether it makes them stronger

B When dog owners don't feed their puppies Brand A food, the puppies do not grow properly

C If Frederico had added the leaves to the compost pile last year, he wouldn't have to organic fertilizer

D if it is dark, then an owl will find a mouse by the sound the mouse makes​

Answers

Answer:

D. if it is dark, then an owl will find a mouse by the sound the mouse makes

Other Questions
What is one advantage of silently reading a play as opposed to listening to an audio recording? Match the gods and goddesses to what the Romans believed they controlled.Jupiter JunoMarsMinerva War Nature Trade Home Which of the following are proteins? A.steak B.Salmon C.eggs D.strawberriesE.nutsF.salmon Triangles ABC and DBC have the following characteristics:BC is a side of both trianglesACB and DCB are right anglesAC DC Which congruence theorem can be used to prove ABC DBC?AASSSSHLSAS What number is 30% of 20? Fiften is 30 percent of what number? which expressions are equivalent to -56z+28?choose 2 correct answers:a: 1/2 x (28z + 14)b: (-1.4z + 0.7) x 40c: (14 -7z) x (-4)d: (8z - 4) (-7)e: -2(-28z -14) S =4LW + 2WH; S = 96, L= 7, W= 3.H=Help please What caused the unity of Charlemagnes Empire to crumble once he had died? Help ASAP If mA=5x-12 mB=2x+18 A and C are supplementary and B and C are supplementary, find x. BRAINLIEST What type of bond is Cu and F Ionic or Covalent? Ricky and James sold beef for a school fundraiser. Ricky sold 52 pounds and James sold 21 pounds. If their total combined sales were $1,168, how much does each pound of beef cost?A. 16.00B. 17.50C. 13.50D. 17.00 A students wants to help her mother in their family store in displaying canned goods. Her mother instructed that the canned should be piled in triangular pile by starting 40 canned goods in the bottom row, 36 in the second row, 32 in the third row, and so on. If the pattern is consistent, how many canned goods will be there in the 7th row? Which of the following is a health problem that occurs as a result of malnutrition in older adults?A.fatigueB.weak immune systemC.depressionD.all of the above What was the Virginia Company's intent/purpose to settling the New World? A. The Virginia Company intended to create new England in the New World. B. The Virginia Company intended to establish churches in the New World. C. The Virginia Company intended to become an ally of Spain in the New World. D. The Virginia Company intended to find gold and create a profitable colony. "During a chemical reaction, you must have the same amount of substanceon both sides of the quation" This statement is the definition for the * The order in which you multiply inverse matrices is not relevant.TrueFalse What is the product of (4)(4)(4)yy using exponents ASAP. I will give brainlies to right answer!!! Three grams of the same substance in different phases are stored in three different containers. Each container is barely large enough to hold the substance.Which statement can be known about the behavior of the atoms in each container?The atoms in the solid would be moving vigorously around the container.The atoms in the liquid would be vibrating in position.The atoms in the solid would be vibrating in position.The atoms in the gas would be moving slowly around the container. How many more states are in the U.S. than when the Declaration of Independence was signed?