Help with algebra 2 homework

Becca made a mistake while constructing triangle DEF by using the angles 50°, 65°, and 65°. The mistake she made was violating the triangle inequality theorem.

According to the theorem, the sum of any two sides of a triangle must be greater than the third side. In other words, if we add the lengths of two sides of a triangle, it must be greater than the length of the third side.

Since Becca only used angles to construct the triangle, she did not consider the side lengths of the triangle. Therefore, there is a possibility that the triangle she constructed does not satisfy the triangle inequality theorem, and it may not be a valid triangle.

In order to ensure the triangle is valid, Becca needs to consider the side lengths while constructing the triangle. She could use trigonometric ratios or a ruler and protractor to measure the side lengths and angles accurately.

To know more about triangle inequality theorem here

https://brainly.com/question/1163433

#SPJ4

Answer:

1

Step-by-step explanation:

First of all we use the "law of sines"

to get the measure/length we need the opposing angle of it of the side, now in this case the missing side is x

and its opposing angle is missing so using common sense, the sum of angles in the triangle is 180°

180°=70°+51°+ x

x = 180°-121°

=59°

Using law of sines:

(sides are represented by small letters/capital letters are the angles)

a/sinA= b/sinB= c/sinC

We have one given side which is "9"

so,

9/sin70= x/sin59

doing the criss-cross method,

9×sin59=sin70×x

9×sin59/sin70=x

x=8.2 (answer 1)

I hope this was helpful <3

(1) m∠1=45°(sum of 3 angles of a triangle is always 180°)

(2) m∠1=180°-129°=51°(sum of two interior angles on the same side is equal to the exterior angle)

(3) m∠1= 152°-115°=37°

(4) m∠1=88°m∠2=42° m∠3=113°

An angle is a geometric figure formed by two rays that share a common endpoint, called the vertex. The measure of an angle is typically expressed in degrees or radians, and it describes the amount of rotation needed to bring one of the rays into coincidence with the other.

A triangle is a closed two-dimensional shape with three straight sides and three angles.

(1) m∠1=45°(sum of 3 angles of a triangle is always 180°)

(2) m∠1=180°-129°=51°(sum of two interior angles on the same side is equal to the exterior angle)

(3) m∠1= 152°-115°=37°(sum of two interior angles on the same side is equal to the exterior angle)

(4) m∠1=88°(sum of 3 angles of a triangle is always 180°),m∠2=42°(vertically opposite angle theorem), m∠3=113°(sum of 3 angles of a triangle is always 180°)

Learn more about angles here:

https://brainly.com/question/28451077

#SPJ1

Answer:

The Correct answer is sinA/3.2=sin110°/4.6

The value of x for the intersecting chords is derived to be 1.9 and the segment FS is equal to 18

The property of intersecting chords states that in a circle, if two chords intersect, the product of the lengths of the segments of one chord is equal to the product of the lengths of the segments of the other chord.

UF × FS = VF × FT

8(10x - 1) = 9 × 16

80x - 8 = 144

80x = 144 + 8 {collect like terms}

80x = 152

x = 152/80 {divide through by 80}

x = 1.9

FS = 10(1.9) - 1 = 18

Therefore, the value of x for the intersecting chords is derived to be 1.9 and the segment FS is equal to 18

Read more about intersecting chords here:https://brainly.com/question/13950364

#SPJ1

The current in the circuit when the resistance is 12 ohms is 40 amps.

What is fraction?

A fraction is a mathematical term that represents a part of a whole or a ratio between two quantities.

We can use the inverse proportionality formula to solve this problem, which states that:

current (in amps) x resistance (in ohms) = constant

Let's call this constant "k". We can use the information given in the problem to find k:

24 amps x 20 ohms = k

k = 480

Now we can use this constant to find the current when the resistance is 12 ohms:

current x 12 ohms = 480

current = 480 / 12

current = 40 amps

Therefore, the current in the circuit when the resistance is 12 ohms is 40 amps.

To learn more about fraction from the given link:

https://brainly.com/question/10354322

#SPJ1

The company should use the adjusted R² approach to select variables for their recommendation system, as it will better account for the influence of multiple variables and help create a more accurate model for predicting subscriber's movie ratings.

To build a successful movie recommendation system for the online media streaming company, it's important to consider the appropriate statistical approach for selecting variables.

In this case, the company should use the adjusted R² approach instead of the p-value approach.

The adjusted R² approach is more suitable for this scenario because it measures the proportion of variance in the dependent variable (subscriber's ratings) that is predictable from the independent variables (movie and subscriber data).

Adjusted R² takes into account the number of variables and adjusts for overfitting, which is important when dealing with a large dataset, like the one the streaming company has.

It helps in identifying the most influential factors and creating a model that better predicts movie ratings.
On the other hand, the p-value approach focuses on the statistical significance of individual variables, which might lead to including variables that are significant but not necessarily the best predictors for movie ratings.

This could result in a less accurate recommendation system.

For similar question on proportion.

https://brainly.com/question/11941144

#SPJ11

The construction and the resulting triangles are interesting because they allow us to explore the properties of perpendicular lines and the angles they form.

Now, let's look at the two triangles that are formed as a result of this construction - ΔABD and ΔBCD. Since line BD is perpendicular to line AC, we know that angle ABD and angle CBD are both right angles. This is because any line that is perpendicular to another line forms a right angle with that line.

Now, let's look at the other sides of the triangles. In ΔABD, we have side AB, which is different from side BC in ΔBCD. Similarly, in ΔBCD, we have side CD, which is different from side AD in ΔABD.

So, although the two triangles share a common side (BD), they have different lengths for their other sides. This means that the two triangles are not congruent, since congruent triangles must have the same length for all their sides.

However, we can still find some similarities between the two triangles. For example, since angle ABD and angle CBD are both right angles, we know that they are congruent. Additionally, we can use the fact that angle ADB is congruent to angle CDB, since they are alternate interior angles formed by a transversal (line BD) intersecting two parallel lines (line AC and the line perpendicular to it passing through point B).

To know more about triangle here

https://brainly.com/question/8587906

#SPJ4

Complete Question:

Draw a line through point B that is perpendicular to line AC Label the intersection of the line and line AC as point D. Take a screenshot of your work, save it, and insert the image in the space below.

Part B

Based on your construction, what do you know about ΔABD and ΔBCD?

Answer:

Step-by-step explanation:

its a rectanlge

Answer: To find the average rate of change of the function f(x) over the interval [9, 65], we can use the formula:

average rate of change = (f(b) - f(a)) / (b - a)

where a = 9, b = 65, f(a) = f(9) = 3√8 + 2, and f(b) = f(65) = 3√64 + 2.

Plugging in these values, we get:

average rate of change = (f(65) - f(9)) / (65 - 9)

average rate of change = (3√64 + 2 - 3√8 - 2) / 56

average rate of change = (3(4) + 2 - 3(2) - 2) / 56

average rate of change = (12 - 4) / 56

average rate of change = 8 / 56

average rate of change = 1 / 7

Therefore, the average rate of change of the function f(x) over the interval [9, 65] is 1/7.

Step-by-step explanation:

Answer:

Step-by-step explanation:

Answer: To find the average rate of change of the function f(x) over the interval [9, 65], we can use the formula:

average rate of change = (f(b) - f(a)) / (b - a)

where a = 9, b = 65, f(a) = f(9) = 3√8 + 2, and f(b) = f(65) = 3√64 + 2.

Plugging in these values, we get:

average rate of change = (f(65) - f(9)) / (65 - 9)

average rate of change = (3√64 + 2 - 3√8 - 2) / 56

average rate of change = (3(4) + 2 - 3(2) - 2) / 56

average rate of change = (12 - 4) / 56

average rate of change = 8 / 56

average rate of change = 1 / 7

Therefore, the average rate of change of the function f(x) over the interval [9, 65] is 1/7.

Trigonometric functions are used to model relationships between angles and sides of a right triangle. They are particularly useful in solving problems that involve angles, distances, heights, and lengths that are difficult to measure directly.

For example, consider a problem that involves finding the height of a building. By measuring the length of the shadow cast by the building at a particular time of day, the angle of the sun's rays can be calculated using trigonometry. Once the angle is known, the height of the building can be determined using the tangent function.

In contrast, a non-trigonometric function may not be able to model the relationship between the given quantities in such problems, and may not provide an accurate solution. Therefore, when a problem involves angles or distances that are not directly measurable, trigonometric functions are typically the best tool for setting up and solving the problem.

To know more about trigonometric functions

https://brainly.com/question/6904750

#SPJ4

When a researcher uses the Pearson product-moment correlation, two highly correlated variables will appear on a scatter diagram as a tightly clustered group of points that form a linear pattern.

The scatter diagram is a visual representation of the correlation between two variables, where one variable is plotted on the x-axis, and the other variable is plotted on the y-axis. If the two variables have a high positive correlation, then the points on the scatter diagram will form a cluster that slopes upwards to the right.

On the other hand, if the two variables have a high negative correlation, then the points will form a cluster that slopes downwards to the right. The tighter the cluster of points, the higher the correlation between the variables.

Learn more about scatter diagram

https://brainly.com/question/30243607

#SPJ4

The correct statement about scale factor is the radius of the larger can will be 8 inches. (option c).

Let's first consider the dimensions of the small can of tomato paste. We are given that it has a radius of 2 inches and a height of 4 inches. Therefore, its volume can be calculated using the formula for the volume of a cylinder, which is V = πr²h, where V is the volume, r is the radius, and h is the height. Substituting the given values, we get:

V_small = π(2²)(4) = 16π cubic inches

Using these dimensions, we can calculate the volume of the larger can using the same formula:

V_large = π(6²)(12) = 432π cubic inches

Now, let's compare the volumes of the small and large cans. We have:

V_large = 432π cubic inches > 16π cubic inches = V_small

Therefore, we can conclude that the volume of the larger can is greater than the volume of the smaller can. But is it three times greater? Let's compare:

V_large = 432π cubic inches 3

V_small = 3(16π) cubic inches = 48π cubic inches

We see that 432π cubic inches is not equal to 48π cubic inches, so option b) is not correct.

Finally, let's consider the radius of the larger can. We found earlier that it is 6 inches, which is greater than the radius of the smaller can, but it is not 8 inches. Therefore, option c) is correct.

To know more about scale factor here

https://brainly.com/question/30215119

#SPJ4

Complete Question:

A small can of tomato paste has a radius of 2 inches and a height of 4 inches. Suppose the larger, commercial-size can has dimensions that are related by a scale factor of 3. Which of these true?

a) The radius of the larger can will be 5 inches.

b) The volume of the larger can will be 3 times the volume of the smaller can

c) The radius of the larger can will be 8 inches.

d) The volume of the larger can is 3 times the volume of smaller can

the translated point is located in the third quadrant of the coordinate system, since both coordinates are negative.

What is Cartesian coordinate?

A coordinate system, also known as a Cartesian coordinate system, is a system used to describe the position of points in space. It is named after the French mathematician and philosopher René Descartes, who introduced the concept in the 17th century. In a coordinate system, each point is assigned a unique pair of numbers, called coordinates, that describe its position relative to two perpendicular lines, called axes. The horizontal axis is usually labeled x and the vertical axis is usually labeled y.

To apply the translation rule T(-3, 1) to the point (2, -7), we need to add the translation vector (-3, 1) to the coordinates of the point:

(2, -7) + (-3, 1) = (-1, -6)

The resulting point after the translation is (-1, -6).

Therefore, the translated point is located in the third quadrant of the coordinate system, since both coordinates are negative.

Learn more about Cartesian coordinates, by the following link

https://brainly.com/question/17206319

#SPJ9

Translate the solid circle 2 units to the left and 2 units down and dilate the solid circle by a scale factor of 2. and the circles are similar

(a) To move the solid circle exactly onto the dashed circle, we need to perform the following transformations:

Therefore, the blank spaces should be filled as follows:

Translate the solid circle 2 units to the left and 2 units down.

Dilate the solid circle by a scale factor of 2.

(b) Yes, the original solid circle and the dashed circle are not similar, because they have different radii.

This is because all circles are similar

Read more about transformation at

https://brainly.com/question/27224272

#SPJ1

Answer:

a 1053

b 250

multiply 650 by 1.62 for part a.

for part b divide by 1.62 since pound is less than dollar

hope this helps :)

The area of the shaded area is 3.27 ft²

We can find the area of the shaded area by subtracting the area of the triangle from the area of the sector. That is;

Area of shaded area = Area of sector - area of triangle

Area of shaded area = (60/360 * π * 6²) - (1/2 * 6 * 6 * sin 60)

Area of shaded area = (60/360 * 22/7 * 36) - (1/2 * 36 * 0.866)

Area of shaded area = 3.27 ft²

Learn more about shaded area on:

https://brainly.com/question/14989383

#SPJ1

For the relevant range of production of units total amount of product and period cost as per units are,

Total amount of product costs for 29,250 units is $687,375.

Total amount of period costs incurred for 29,250 units is $58,511.50

Total amount of product costs for 33,500 units is equal to $787,250.

Total amount of period costs for 25,000 units  is equal to $50,011.50.

Average Cost per Unit Direct materials  = $ 8. 50

Direct labor = $ 5. 50

Variable manufacturing overhead = $ 3. 00

Fixed manufacturing overhead = $ 6. 50

Fixed selling expense  = $ 5. 00

Fixed administrative expense = $ 4. 00

Sales commissions = $ 2. 50

Variable administrative expense = $ 2. 00

Total unit produced = 29,250 units,

Total product costs

= (Direct materials + Direct labor + Variable manufacturing overhead + Fixed manufacturing overhead) x Number of units produced

= ($8.50 + $5.50 + $3.00 + $6.50) x 29,250

= $23.50 x 29,250

= $687,375

The total amount of product costs incurred to make 29,250 units is $687,375.

Total period costs

= Fixed selling expense + Fixed administrative expense + Sales commissions + (Variable administrative expense x Number of units sold)

= $5.00 + $4.00 + $2.50 + ($2.00 x 29,250)

= $5.00 + $4.00 + $2.50 + $58,500

= $58,511.50

The total amount of period costs incurred to sell 29,250 units is $58,511.50

For the number of units produced changed to 33,500.

Total product costs

= (Direct materials + Direct labor + Variable manufacturing overhead + Fixed manufacturing overhead) x Number of units produced

= ($8.50 + $5.50 + $3.00 + $6.50) x 33,500

= $23.50 x 33,500

= $787,250

The total amount of product costs incurred to make 33,500 units is $787,250.

The number of units sold changed to 25,000.

Total period costs

= Fixed selling expense + Fixed administrative expense + Sales commissions + (Variable administrative expense x Number of units sold)

= $5.00 + $4.00 + $2.50 + ($2.00 x 25,000)

= $5.00 + $4.00 + $2.50 + $50,000

= $50,011.50

The total amount of period costs incurred to sell 25,000 units is $50,011.50.

Therefore, the total amount of the product and period cost for different situations are,

Total amount of product costs is equal to $687,375.

Total amount of period costs incurred is equal to $58,511.50

Total amount of product costs is equal to $787,250.

Total amount of period costs is equal to $50,011.50.

learn more about cost here

brainly.com/question/17927959

#SPJ4

Para entender mejor esta función, podemos expandirla y simplificarla:

f(x) = (x+2)(-x+6)

f(x) = [tex]-x^2 + 4x + 12[/tex]

Esta es una función cuadrática, lo que significa que tiene la forma de una parábola. El término cuadrático ([tex]-x^2[/tex]) hace que la parábola tenga una concavidad hacia abajo, lo que significa que el valor máximo de la función se encuentra en el vértice de la parábola.

Podemos encontrar el valor del precio de venta que maximiza la ganancia utilizando la fórmula x = -b/(2a), donde "a" es el coeficiente del término cuadrático y "b" es el coeficiente del término lineal.

En este caso, a = -1 y b = 4, por lo que:

x = -4/(2-1)

x = -4/-2

x = 2

Por lo tanto, el precio de venta que maximiza la ganancia es de 2 por unidad. Si se venden las unidades a este precio, la ganancia total sería de:

f(2) = [tex]-2^2 + 4(2) + 12[/tex]

f(2) = -4 + 8 + 12

f(2) = 16 dólares

Es importante tener en cuenta que la función f(x) también puede ser utilizada para calcular la ganancia total para cualquier precio de venta "x". Por ejemplo, si se venden las unidades a 3 por unidad, la ganancia sería:

f(3) = [tex]-3^2 + 4(3) + 12[/tex]

f(3) = -9 + 12 + 12

f(3) = 15 dólares

for such more question on mejor esta

https://brainly.com/question/1030576

#SPJ11

Therefore , the solution of the given problem of unitary method comes out to be during the 4-second period, the tram's elevation changed by 3 metres every second.

To complete the assignment, use the iii . -and-true basic technique, the real variables, and any pertinent details gathered from basic and specialised questions. In response, customers might be given another opportunity to sample expression the products. If these changes don't take place, we will miss out on important gains in our knowledge of programmes.

Here,

By dividing the overall elevation change (12 metres) by the total time required (4 seconds),

it is possible to determine the change in the tram's elevation every second. We would then have the average rate of elevation change per second.

=> Elevation change equals 12 metres

=> Total duration: 4 seconds

=>  12 meters / 4 seconds

=> 3 meters/second

As a result, during the 4-second period, the tram's elevation changed by 3 metres every second.

To know more about unitary method  visit:

https://brainly.com/question/28276953

#SPJ1  

The probability that the total shown on the two dice after they are rolled is greater than or equal to 8 is 1/9.

Answer: 3 pieces

Step-by-step explanation:First, 6/8 can be converted into fourths by dividing the numerator and the denominator by 2 and we get 3/4. if we want 1/4 slices we divide 3/4 by 1/4 and get 3.

Answer: The answer to your question is D! Brainliest?

Step-by-step explanation:

To find the height needed to reach a volume of 240 ft^3, we can use the formula:

Volume = length x width x height

Substituting the given values, we get:

240 = 8 x 6 x height

Simplifying:

240 = 48 x height

height = 240/48

height = 5

Therefore, the height needed to reach a volume of 240 ft^3 is 5 feet.

Answer: (D) 5 feet.

Since cosine is negative and a is in quadrant III, we know that sine is positive. We can use the Pythagorean identity to solve for sine:

sin^2(a) + cos^2(a) = 1

sin^2(a) + (-5/9)^2 = 1

sin^2(a) = 1 - (-5/9)^2

sin^2(a) = 1 - 25/81

sin^2(a) = 56/81

Taking the square root of both sides:

sin(a) = ±sqrt(56/81)

Since a is in quadrant III, sin(a) is positive. Therefore:

sin(a) = sqrt(56/81) = (2/3)sqrt(14)

The total amount of money received by each child after splitting $9 among 15 children is equal to $0.60.

Total number of children is equal to 15

Total amount of money distributed among 15 children = $9

To find out how much each child receives,

We can divide the total amount of money by the number of children.

In this case, there are 15 children and $9 to split.

So, the amount of money each child receives is equal to,

(Total amount of money )/ ( total number of children )

= $9 ÷ 15

= $0.60

Therefore, amount of money received by each child in the group of 15 children is equal to $0.60.

Learn more about children here

brainly.com/question/159555

#SPJ4

The answers are:

a) 2 cakes cost £5

b) 1 cake costs £2.5.

What is an algebraic expression?

An algebraic expression is a mathematical phrase that contains variables, constants, and mathematical operations. It may also include exponents and/or roots. Algebraic expressions are used to represent quantities and relationships between quantities in mathematical situations, often in the context of problem-solving.

To find the cost of 1 cupcake, we need to subtract the cost of the tea from the total cost of 3 cupcakes:

3 cupcakes + 1 tea = £9

3 cupcakes = £9 - 1 tea = £9 - £1.5 (assuming the cost of 1 tea is the same in both cases) = £7.5

1 cupcake = £7.5 ÷ 3 = £2.5

So 2 cupcakes would cost:

2 cupcakes = 2 × £2.5 = £5

Therefore, the answers are:

a) 2 cakes cost £5

b) 1 cake costs £2.5.

To learn more about algebraic expression from given link:

https://brainly.com/question/19245500

#SPJ1

Answer:

Step-by-step explanation:

If the solutions are x = -3 and x = -1, then (x - 3) (x - 1) will give us our answer. Using the FOIL method,

(x - 3) (x - 1)

x^2 - x - 3x + 3

x^3 - 4x + 3 = 0

Your answer is 3

The two column proof is written as follows

Statement                                                           Reason

MA = XR                                           given (opposite sides of rectangle)

MK = AR                                           given (opposite sides of rectangle)

arc MA = arc RK                               Equal chords have equal arcs

arc MK = arc AK                               Equal chords have equal arcs

An arc is a portion of the circumference of a circle, and a chord is a line segment that connects two points on the circumference.

If two chords in a circle are equal in length, then they will cut off equal arcs on the circumference. This is because the arcs that the chords cut off are subtended by the same central angle.

Learn more on circle theorem at:

https://brainly.com/question/6240879

#SPJ1

The probability of picking one bolt and one nut is 1/2 or 50%.

To find the probability that one is a bolt and one is a nut, we need to use the formula for calculating the probability of two independent events happening together: P(A and B) = P(A) × P(B)

Let's first calculate the probability of picking a bolt from the box:

P(bolt) = number of bolts / total number of parts = 3/6 = 1/2

Now, let's calculate the probability of picking a nut from the box:

P(nut) = number of nuts / total number of parts = 3/6 = 1/2

Since the events are independent, the probability of picking a bolt and a nut in any order is:

P(bolt and nut) = P(bolt) × P(nut) + P(nut) × P(bolt)

P(bolt and nut) = (1/2) × (1/2) + (1/2) × (1/2)

P(bolt and nut) = 1/2

Therefore, the probability of picking one bolt and one nut is 1/2 or 50%.

Learn more about  probability

https://brainly.com/question/30034780

#SPJ4

the probability that one chosen part is a bolt and the other chosen part is a nut is 1, or 100%. This makes sense because if we choose two parts at random, we must get one bolt and one nut since there are three of each in the box.

To find the probability that one chosen part is a bolt and the other chosen part is a nut, we need to use the formula for probability:

Probability = (number of desired outcomes) / (total number of outcomes)

There are two ways we could choose one bolt and one nut: we could choose a bolt first and a nut second, or we could choose a nut first and a bolt second. Each of these choices corresponds to one desired outcome.

To find the number of ways to choose a bolt first and a nut second, we multiply the number of bolts (3) by the number of nuts (3), since there are 3 possible bolts and 3 possible nuts to choose from. This gives us 3 x 3 = 9 total outcomes.

Similarly, there are 3 x 3 = 9 total outcomes if we choose a nut first and a bolt second.

Therefore, the total number of desired outcomes is 9 + 9 = 18.

The total number of possible outcomes is the number of ways we could choose two parts from the box, which is the number of ways to choose 2 items from a set of 6 items. This is given by the formula:

Total outcomes = (6 choose 2) = (6! / (2! * 4!)) = 15

Putting it all together, we have:

Probability = (number of desired outcomes) / (total number of outcomes)
Probability = 18 / 15
Probability = 1.2

However, this answer doesn't make sense because probabilities should always be between 0 and 1. So we made a mistake somewhere. The mistake is that we double-counted some outcomes. For example, if we choose a bolt first and a nut second, this is the same as choosing a nut first and a bolt second, so we shouldn't count it twice.

To correct for this, we need to subtract the number of outcomes we double-counted. There are 3 outcomes that we double-counted: choosing two bolts, choosing two nuts, and choosing the same part twice (e.g. choosing the same bolt twice). So we need to subtract 3 from the total number of desired outcomes:

Number of desired outcomes = 18 - 3 = 15

Now we can calculate the correct probability:

Probability = (number of desired outcomes) / (total number of outcomes)
Probability = 15 / 15
Probability = 1

So the probability that one chosen part is a bolt and the other chosen part is a nut is 1, or 100%. This makes sense because if we choose two parts at random, we must get one bolt and one nut since there are three of each in the box.

learn more about probability

https://brainly.com/question/30034780

#SPJ11