Help ya girl out plz

The Option C is correct precipitation is concentrated in the season

Hope it help

Answer:

C) precipitation is concentrated in one season

Explanation:

edge 2020

Answer: Since oxygen is in group 6 on the periodic table, its valency is  

2 −

and hence so is its oxidation number.

But there are 2 oxygen atoms for each carbon atom so the total negative charge due the oxygen is  

4 −

But since a molecule must have a net charge of zero in the free form, it implies that the oxidation number of the carbon atom must then be  

+ 4

Answer:

balanced equation:

2Ca(NO3)2 (aq)-----> 2CaO (s) + 4NO2 (g) + O2 (g)

So heating 2 moles of Ca(NO3)2 gives 2 moles of CaO, 4 moles of NO2 and 1 mole of O2. This is a heat decomposition reaction. It gives a white precipitate (CaO), and brown pungent gas (NO2).

Answer:

The balanced equation of the reaction is below.

Explanation:

2Ca(NO3)2 -----> 2CaO + 4NO2 + O2.

Explanation:

pH is used to measure the concentration of H+ ions ([H+]) and therefore, whether a substance is acidic or basic (alkaline). Solutions with a pH of less than seven are acidic, while those with a pH greater than seven are basic (alkaline).

Answer:

greater than 7

Explanation:

A base is any solution with a pH greater than 7. A pH of 7 is considered neutral. For example, the pH of water. An acid is any solution with a pH less than 7.

Hope that helps.

Answer:

helium , krypton,xenon,radon, argon are noble gasses

Explanation:

Cyclopropane is a cycloalkane conposed of three carbon atoms to form a ring. It has a rols as an inhalation anaesthetic. It is a cycloalkane and a member of cyclopropanes.

Answer:

Alkane

Explanation:

Answer:

C₅H₁₂ + 8O₂ → 5CO₂ + 6H₂O

Explanation:

Let's start by counting how many molecules we have on each side.

Reactants

C - 5

H - 12

O - 2

Products

C - 1

O - 3

H - 2

We have to balance both sides. Since we have 5 carbon atoms on the reactants side and 1 carbon atom on the products side, we'll start with that. Write 5 as the coefficient for CO₂ to balance the carbons.

C₅H₁₂ + O₂ → 5CO₂ + H₂O

Now that the carbons are balanced, let's look at the hydrogens. There's 12 on the reactants side and 2 on the products side. To balance the hydrogens, we have to write 6 as the coefficient for H₂O.

C₅H₁₂ + O₂ → 5CO₂ + 6H₂O

Now the hydrogens are balanced. All that's left to do is balance the oxygens. Let's start by counting how many atoms we have on each side.

Reactants

C - 5

H - 12

O - 2

Products

C - 5

H - 12

O - 16

So, to balance the number of atoms on both sides, write 8 as the coefficient for O₂.

C₅H₁₂ + 8O₂ → 5CO₂ + 6H₂O

Lastly, let's check to make sure everything is balanced.

Reactants

C - 5

H - 12

O - 16

Products

C - 5

O - 16

H - 12

Both sides are balanced. Therefore, the balanced chemical equation is: C₅H₁₂ + 8O₂ → 5CO₂ + 6H₂O.

Hope that helps.

Answer:

[tex]\boxed{C_{5}H_{12} + 8O_{2} -->5CO_{2} + 6H_{2}O}[/tex]

Explanation:

Part 1: Count the number of atoms on each side per element

To start, count the number of atoms per element on both sides of the equation.

Left Side

C - 5 atoms

H - 12 atoms

O - 2 atoms

Right Side

C - 1 atom

H - 2 atoms

O - 3 atoms

Part 2: Balance carbon atoms

Now, with this information, you can begin finding out how to properly balance both sides of the equation.

You need 5 carbon atoms on the left, so place a coefficient of 5 in front of the [tex]CO_{2}[/tex] product. This will balance the carbons. Do not place a coefficient in front of the [tex]C_{5}H_{12}[/tex] reactant - none are necessary!

Then, you can update your counts for your atoms.

Left Side

C - 5 atoms

H - 12 atoms

O - 2 atoms

Right Side

C - 5 atoms

H - 2 atoms

O - 11 atoms

The updated equation will look like this:

[tex]\boxed{C_{5}H_{12}+O_{2} --> 5CO_{2} + H_{2}O}[/tex]

Part 3: Balance hydrogen atoms

Now, balance the hydrogen atoms. Place a coefficient of 6 in front of the [tex]H_{2}O[/tex] product. This will balance the hydrogen atoms.

Once again, update the atom counts:

Left Side

C - 5 atoms

H - 12 atoms

O - 2 atoms

Right Side

C - 5 atoms

H - 12 atoms

O - 16 atoms

The updated equation will look like this:

[tex]\boxed{C_{5}H_{12} +O_{2}--> 5CO_{2} +6H_{2}O}[/tex]

Part 4: Balance oxygen atoms

To fully balance the equation, place a coefficient of 8 in front of the [tex]O_{2}[/tex] reactant. This will equalize the amount of oxygen atoms on both sides of the equation.

The updated equation will look like this:

[tex]\boxed{C_{5}H_{12} + 8O_{2} --> 5CO_{2} + 6H_{2}O}[/tex]

Part 5: Check the equation and atom counts

Now, update the atom counts one last time to make sure they are equal.

Left Side

C - 5 atoms

H - 12 atoms

O - 16 atoms

Right Side

C - 5 atoms

H - 12 atoms

O - 6 atoms

They are equal, so you may proceed.

Part 6: Check if reductions are necessary

If the equations coefficients can all be divided by a common divisor (i.e., 3), follow up with that step. However, any equation that has a reactant or product without a coefficient, skip this step entirely.

This equation falls into that category, so you may proceed past it.

Your final equation will look like this: [tex]\boxed{C_{5}H_{12} + 8O_{2} -->5CO_{2} + 6H_{2}O}[/tex]

Answer:

(b)

Explanation:

The 3s^2, 3p^6  orbitals form  -3 charge.

This is the element phosphorous and an example of a -3 ion is in aluminium phosphide, AlP3.

The electronic configuration which represents the element forming a simple ion having with a charge of -3 is; 1s², 2s², 2p⁶, 3s², 3p³. Option B is correct.

In this electronic configuration, the element has a total of 16 electrons. To form a simple ion with a charge of -3, the element needs to gain three electrons. This is achieved by adding three extra electrons to the existing configuration.

When the element gains three electrons, the electron configuration becomes:

1s², 2s², 2p⁶, 3s², 3p⁶

This configuration represents the stable octet configuration, where the element has a complete outer shell with eight electrons. Since the charge is -3, it means the element has gained three extra electrons to achieve a stable configuration.

Therefore, the correct electronic configuration representing the element that forms a simple ion with a charge of -3 is 1s², 2s², 2p⁶, 3s², 3p³

Hence, B. is the correct option.

To know more about electronic configuration here

https://brainly.com/question/29184975

#SPJ2

Answer:

oppositely charged ions in a chemical compound

Explanation:

Answer:

Between ions

Explanation:

Answer:

A large point of evidence in this would be the rate of increase in how fast the polar ice caps are melting and the ocean is rising as a result. As the climate is getting warmer so are the oceans and this is causing the ice caps which are in the ocean.

Explanation:

Answer:

See explanation

Explanation:

Charles law gives the relationship between volume and temperature of a gas. Charles law States that, the volume of a given mass of gas is directly proportional to its temperature at constant pressure.

Theoretically, it is assumed that when the absolute zero temperature has been achieved, the volume of any ideal gas will be found to be equal to zero. If the volume of the gas is zero, it now implies that all molecular motion will be stopped. This does not happen in real gases as all gases are found to condense to solids or liquids when this temperature is exceeded.

When volume is plotted against temperature, volume of the gas approaches zero at t = −273.15 °C, which is the x-intercept of the Charles law graph. Below this temperature, we can only get negative values of volume which does not exist hence, −273.15 °C is the lowest attainable temperature also known as the absolute zero.

Answer:

[tex]\boxed{\mathrm{Iodine}}[/tex]

Explanation:

Halogens are elements in group 17 or 7 in the periodic table.

Iodine is a halogen.

Therefore, iodine, an Halogen

Learn more at: https://brainly.com/question/15852546?referrer=searchResults

Answer:

three electrons were transferred in the process

Explanation:

The electrode potential of the cathode is

E°cathode= E°cell + E°anode

E°cathode = 2.35V + (-0.74V)

E°cathode= 1.61 V

Let us look at the reduction half equation; the oxidation half equation must be;

Oxidation half equation;

Cr(s) ----> Cr^3+(aq) + 3e

The reduction half equation must now be

Reduction half equation;

3Ce^4+(aq) + 3e ----> 3Ce^3+(aq)

This implies that three electrons were transferred in the process as shown by the balanced half cell reaction equations.

[tex]7.408 \;X 10 ^ {-3} m^{-2} s^{-1}[/tex]  is rate of a reaction when k = 0.2, [A] = 3 M, [B] = 3 M, m = 1, n = 2 .

The rate at which the concentration of reactant or product participating in a chemical reaction alters is called the rate of reaction.

Rate of reaction = [tex]\frac{change \;in \;concentration}{time}[/tex] =  (mol/litre)/time.

m= 1 and n = 2

[tex]rate = K [A] [B]^2[/tex]

[tex]0.2 = K X 3 X 3 ^2[/tex]

K =   [tex]\frac{0.2 }{27 }[/tex]

K =   [tex]7.408 \;X 10 ^ {-3} m^{-2} s^{-1}[/tex]

Hence, [tex]7.408 \;X 10 ^ {-3} m^{-2} s^{-1}[/tex]  is rate of a reaction when k = 0.2, [A] = 3 M, [B] = 3 M, m = 1, n = 2 .

Learn more about the rate of a reaction here:

https://brainly.com/question/8592296

#SPJ2

Answer: 7.4 10-3

Explanation:

7.4 10-3 this is right ong

Explanation:

astronomers have discover that in general the future of a Galaxy is, the more redshift light is this mean that the further away the Galaxy are the faster they are moving this is similar to explosion where the bits moving fastest travel for furthest on the explosion redshift data provides evidence that the universe including space itself is expanding .

Answer:

The chemical bond between 2 molecules is called an intermolecular force.

Answer:

Chemical Bond:

Attraction between two atoms results in the formation of a bond which is called a chemical bond.

Inter molecular Forces:

Attractive Force that in between 2 molecules is called Inter molecular Forces. (Inter : Between)

Answer:

Transition metals (Group C) have different numbers of valence electrons compared to the other groups mentioned. Therefore option C is correct.

Transition metals (Group 3-12) have varying numbers of valence electrons. This is because their valence electrons are located in more than one energy level or subshell.

The number of valence electrons for transition metals can range from 1 to 12, depending on the specific element within the group. The varying numbers of valence electrons in transition metals contribute to their diverse chemical properties and ability to form multiple oxidation states.

Therefore, transition metals (Group C) have different numbers of valence electrons compared to the other groups mentioned.

Know more about transition metals:

https://brainly.com/question/29828769

#SPJ2

Explanation:

Deliquescent substances are solids that absorb moisture from the atmosphere until they dissolve in the absorbed water and form solutions. Efflorescent: Efflorescent substances are solids that can undergo spontaneous loss of water from hydrated salts.

Answer:

The acid solution is a concentrated solution.

Explanation:

Acetic acid is a weak acid, because it ionizes partially in water as shown below:

CH3COOH + H2O —> H3O+ + CH3COO-

A solution containing a larger quantity of acetic acid is termed concentrated solution.

This is so because a concentrated solution is a solution that contains more of the solute than the solvent.

A solute is the substance which dissolves in the solvent.

A solvent is the substance which dissolves a solute.

In this case, acetic acid is the solute and water is the solvent.

Solution is simply the combination of solute and solvent

Solution => Solute + Solvent

More solute + Less solvent => Concentrated solution

Therefore, a solution containing a higher quantity of acetic acid ( i.e the solute) in water (i.e the solvent) is called a concentrated solution.

Answer:

The statement that describes an electron is "It has a negative charge and is located in orbitals around the nucleus." Electrons are the smallest of the three particles that make up atoms

Explanation:

Electrons are found in shells or orbitals that surround the nucleus of an atom

Electrons are the sub-atomic particles that carry a negative charge over them. In the atom, the electrons are found in the orbitals or the shells around the nucleus. Thus, option D is correct.

Electrons are the smallest sub-atomic particle that has been known to carry a negative charge and are found in the orbitals of the atom. The charge carried by an electron is 1.602 x 10⁻¹⁹ coulomb and is small than the proton and neutron.

They revolve around the nucleus in their orbits and exhibit the properties of waves and matter. The number of electrons and protons are the same in a neutral atom which makes the atomic number.

Therefore, the electrons have been known to carry a negative charge that revolves in orbit around the nucleus.

Learn more about electrons here:

https://brainly.com/question/11670765

#SPJ6

Your question is incomplete, but most probably your full question was, Which statement describes an electron?

The question is incomplete, the complete question is;

A student investigated some properties of lead and recorded the findings in the table below. Property Observation Color Dull gray Density 11.3 g/cm3 Volume of sample 3 cm3 Melting point 327°C Reaction with air Lead oxide forms on the surface Electrical conductivity Conducts some electricity Which statement is true with respect to the investigation?

A. The student investigated only the physical properties of lead.  

B. The student investigated only the chemical properties of lead.  

C. The student investigated more physical properties than chemical properties of lead.  

D. The student investigated more chemical properties than physical properties of lead.

Answer:

The student investigated more physical properties than chemical properties of lead.

Explanation:

If we look at the things mentioned in the question as regards the approach of the student towards the study of lead, we will discover that he/studied;

Colour, density, volume, melting point and electrical conductivity which are all physical properties. Physical properties of a substance does not involve chemical reactions of the substance under study.

The only chemical property studied by the student is its formation of an oxide- lead oxide with air as follows;

2Pb(s) + O₂(g) → 2PbO(s)

Thus we can safely conclude that; the student investigated more physical properties than chemical properties of lead.

Answer:

c

Explanation:

edge 2021 :)

Answer:

Yes, at 20 °C the tank was filled to full capacity

Explanation:

Given;

let initial pressure, P₁ = 2.37 atm

let initial volume, V₁ = 1860 L

let final pressure, P₂ = 220 bar = 217.123 atm

let final volume, V₂ = ?

Subject the air volume (1860 L )  at 2.37 atm to the tank rating (220 bar)

Ideal law is given by;

PV = nRT

At a fixed mole and gas temperature, the equation becomes;

P₁V₁ = P₂V₂

V₂ = (P₁V₁) / P₂

V₂ = (2.37 x 1860) / 217.123

V₂ = 20.3 L

After subjecting the air volume to tank rating, the volume of the air at 220 bar is 20.3 L which is greater than tank volume (18 L).

The extra 2.3 L can be assumed to be compressed gas volume due to the given (lower) temperature.

Thus, at 20 °C the tank was filled to full capacity.

Answer:

Here's what I get from one source.

Explanation:

[tex]\begin{array}{lc}\textbf{Source} &\textbf{Contribution \%} \\\text{Space heating }& 45\\\text{Water heating} &18\\\text{Space cooling} & 9 \\\text{Computers/Electronics} & 6 \\\text{Lighting} & 6 \\\text{Cooking} & 4 \\\text{Refrigeration} & 4 \\\text{Wet cleaning} & 3 \\\text{Other} & 5 \\\end{array}[/tex]

The pie chart is in the Figure below.

Answer:

A

Explanation:

civil deals with desighning, construction work of natural or physical environment and a fits guess

Answer:

Chemical Changes are also called Chemical Reactions. Chemical reactions involve combining different substances. The chemical reaction produces a new substance with new and different physical and chemical properties. Matter is never destroyed or created in chemical reactions.

Explanation:

Answer:

[tex]\large \boxed{\sf subatomic \ particles}[/tex]

Explanation:

The smaller particles in an atom are called subatomic particles. Subatomic particles include electrons, protons, and neutrons.

Answer:

A.

Explanation:

Higher temperature - more kinetic energy - more space between particles - higher volume.

Explanation:

What are the two oxidation states of sulphur in sodium thiosulphate ? In thiosulphate, two sulphurs have oxidation state of -2 and +6. (as per suggestions). Sulphur bonded to three oxygen is considered to have +6 (Sulphur A) and other sulphur has -2 (Sulphur B).

Answer:

The correct options are;

C. Divergent plate boundary

D. Normal faults

Explanation:

Tensile stress tends to pull objects part by acting axially upon the object to pull the object on a cross section perpendicular to the objects cross-section

The most common stress in convergent plate boundaries is compression stress

The most common stress in divergent plate boundaries is tensile stress

In the presence of tensile stress, normal faults results in the raising of mountains due to their enormous forces

Therefore, the features of Earth's crust involving tension are divergent plate boundary and normal faults.

Answer:c and d

Explanation: