HEY GUYS NEED SOME HELP ON THIS ONE!!!
Triangle LNR is graphed on a coordinate grid shown below.

A translation 3 units right and 2 units down, followed by a dilation centered at the origin with a scale factor of 2, is performed on triangle LNR to create triangle L'N'R'. Which statement about side of triangle L'N'R' is true?

a. Because vertex L' is located at (–2, 6) and vertex N' is located at (4, –2), the length of side is 12 units.
b. Because vertex L' is located at (–2, 6) and vertex N' is located at (4, –2), the length of side is 10 units.
c. Because vertex L' is located at (–4, 4) and vertex N' is located at (2, –4), the length of side is 12 units.
d. Because vertex L' is located at (–4, 4) and vertex N' is located at (2, –4), the length of side is 10 units.

The graph of the polynomial function​ that passes through the points P(−2,2) and Q(1,0) is added as an attachment

From the question, we have the following parameters that can be used in our computation:

The graph passes through the points P(−2,2) and Q(1,0)

Assuming the graph is a linear function

So, we have

y = mx + c

Where

c = y when x = 0 and m = slope

This gives

-2m + c = 2

m + c = 0

Subtract the equations

So, we have

-3m = 2

m = -2/3

Solving for c, we have

-2/3 + c = 0

Evaluate

c = 2/3

So, the equation is f(x) = -2/3x + 2/3

See attachment for the graph

Read more about polynomial function at

https://brainly.com/question/7693326

#SPJ1

Complete question

Draw the graph of polynomial function f(x) containing the points P(−2,2) and Q(1,0)

Answer:

3.2

Step-by-step explanation:

Answer:

pythagorean theorem !!!!!!

Step-by-step explanation:

0.8²+1.6²=3.2²

0.64+2.56=10.24

THAT means the distance is

[tex] \sqrt{10.24} [/tex]

=3.2miles

The area of the square is 49 in². (third option)

The area of the circle is 75.39 in². (fourth option)

The area of the shaded portion is 26.39 in².(first option)

A square is a quadrilateral with four equal sides.

Area of a square = length²

7² = 49 in²

A circle is a bounded figure which points from its center to its circumference is equidistant.

Area of a circle = πr²

Where :

3.14 x 4.9² = 75.39 in²

Area of the shaded portion = area of circle - area of square

75.39 in² - 49 in² = 26.39 in²

To learn about squares, please check: https://brainly.com/question/9030544

#SPJ1

The values of x and y in the system of equations, x - y = 5 and 3x - 2y = 12, are: x = 2  y = -3

Given the system of equations:

x - y = 5 --> eqn. 1

3x - 2y = 12 --> eqn. 2

Rewrite equation 1:

x = 5 + y --> eqn. 3

Substitute x for 5 + y into equation 2:

3(5 + y) - 2y = 12

15 + 3y - 2y = 12

15 + y = 12

y = 12 - 15 [subtraction property]

y = -3

Substitute y = -3 into equation 3:

x = 5 + (-3)

x = 2

Learn more about system of equations on:

https://brainly.com/question/25976025

#SPJ1

To prove convergence for the root test with complex numbers, we use the same approach as with real numbers.
Let's consider a series ∑an with complex terms. We can apply the root test by taking the nth root of the absolute value of each term, which gives us:
lim (n→∞) ∛|an|
If this limit is less than 1, then the series converges absolutely. If it is greater than 1, then the series diverges.
To prove convergence for the root test, we need to show that this limit is less than 1. We can do this by expressing the complex number an in polar form, such that an = rn*e^(iθn), where rn is the magnitude of an and θn is its argument.
Then, taking the nth root of the absolute value of an, we get:
|an|^1/n = (rn)^(1/n)
We can express rn as |an|*cos(θn) + i*|an|*sin(θn), and take the nth root of each term separately:
|an|^1/n = [(|an|*cos(θn))^2 + (|an|*sin(θn))^2]^(1/2n)
= |an|^(1/n) * [(cos(θn))^2 + (sin(θn))^2]^(1/2n)

= |an|^(1/n)
Since the limit of |an|^(1/n) is the nth root of the magnitude of the series, we can rewrite the root test as:
lim (n→∞) ∛|an| = lim (n→∞) |an|^(1/n)
If we can show that this limit is less than 1, then we have proven convergence for the root test with complex numbers.

One way to do this is to use the fact that |an|^(1/n) ≤ r, where r is the radius of convergence of the series. This inequality follows from Cauchy's root test, which applies to both real and complex numbers.
Therefore, if the radius of convergence of the series is less than 1, then the limit of |an|^(1/n) is also less than 1, and the series converges absolutely.
In summary, to prove convergence for the root test with complex numbers, we express each term in polar form and take the nth root of its magnitude. We then show that the limit of these roots is less than 1 by using Cauchy's root test and the radius of convergence of the series.

To learn more about Convergence of Complex Numbers : https://brainly.com/question/27847549

#SPJ11

In this case, since the curve is not a cylindrical helix, there is no well-defined axis.

A cylindrical helix is a curve in 3D space that follows the path of a cylinder as it is unwrapped along a line. The curve is parameterized by a vector function α(t) = (x(t), y(t), z(t)), where x(t) = r cos(t), y(t) = r sin(t), and z(t) = ht, with r and h being the radius and height of the cylinder, respectively.

In this case, the parameterization of the curve is given by α(t) = (at, bt^2, t^3). To determine if it is a cylindrical helix, we need to check if it follows the path of a cylinder as it is unwrapped along a line.

First, let's look at the z-coordinate, which corresponds to the height of the curve. We see that it is a cubic function of t, which means that the curve is not a horizontal line and it does not lie in a plane. This suggests that the curve may be a helix.

Next, let's look at the x and y-coordinates. The x-coordinate is a linear function of t, which means that it varies uniformly along the curve. The y-coordinate, on the other hand, is a quadratic function of t, which means that it changes faster than the x-coordinate.

This indicates that the curve may be a spiral, which is a type of helix that has an additional circular motion in the x-y plane as it moves along the z-axis. To confirm that the curve is a spiral, we need to check that the radius of the circle traced out by the curve in the x-y plane is constant.

To find the radius, we can take the derivative of the x and y-coordinates with respect to t:

dx/dt = a

dy/dt = 2bt

The radius of the circle is given by:

r = sqrt(x^2 + y^2) = sqrt(a^2 + 4b^2t^2)

We can take the derivative of r with respect to t to see if it is constant:

dr/dt = 4bt/sqrt(a^2 + 4b^2t^2)

We see that dr/dt is not constant, which means that the radius of the circle traced out by the curve is changing as it moves along the z-axis. Therefore, the curve is not a spiral.

In summary, the necessary and sufficient conditions for the curve to be a cylindrical helix are:

The z-coordinate of the curve is a linear function of t, i.e., z(t) = ht.

The radius of the circle traced out by the curve in the x-y plane is constant.

In this case, the curve does not satisfy condition 2, which means that it is not a cylindrical helix.

The axis of the curve is the line along which the cylinder is unwrapped. In this case, since the curve is not a cylindrical helix, there is no well-defined axis.

To learn more about cylindrical visit:

https://brainly.com/question/11560606

#SPJ11

The maximum total power of the electronic components that can safely be mounted on this circuit board is 4.2 W.

The maximum total power of the electronic components that can safely be mounted on the circuit board is determined by the amount of heat that can be removed from the channel by the air flow without exceeding the maximum allowable temperature of 50°C on the channel surface.

To calculate the maximum total power of the electronic components, we need to determine the heat transfer rate from the channel to the air flow

where Q is the heat transfer rate, h is the convective heat transfer coefficient, A is the surface area of the channel, and ΔT is the temperature difference between the channel surface and the air.

The convective heat transfer coefficient can be calculated using the Nusselt number correlation for flow inside a rectangular channel:

Nu =  8.24

h =  8.240.02551 /0.2 = 1.048 W/m

where L is the channel's hydraulic diameter, equal to [tex]2*(0.2*14)/(0.2+14)[/tex]  = 0.278 cm = 0.00278 m.

The surface area of the channel is A = 20.220 + 20.214 + 14[tex]*20[/tex] = 120.8 cm[tex]^2[/tex] = 0.01208 [tex]m^2.[/tex]

The temperature difference between the channel surface and the air is ΔT = 50°C - 15°C = 35°C.

Therefore, the maximum heat transfer rate from the channel to the air flow is:

Q = hAΔT = 1.0480.0120835 = 0.0042 kW

This means that the maximum total power of the electronic components that can be safely mounted on the circuit board is:

P = Q = 0.0042 kW = 4.2 W

Therefore, the maximum total power of the electronic components that can safely be mounted on this circuit board is 4.2 W.

To know more about cross-section here

https://brainly.com/question/3603397

#SPJ4

The maximum number of strings that can be cut before the volleyball net falls apart into two pieces, considering a mesh with m squares on the horizontal dimension and n squares on the vertical dimension, is min(m+1, n+1).

To determine the maximum number of strings that can be cut before the volleyball net falls apart into two pieces, considering the mesh has m squares on the horizontal dimension and n squares on the vertical dimension, we can solve this as a network problem. Here's a step-by-step explanation:

1. Visualize the volleyball net as a graph with nodes representing the intersections of the strings and edges representing the strings themselves.

2. Observe that there are (m+1) nodes horizontally and (n+1) nodes vertically. This is because each square has a node at each corner, so there is an additional node on each side.

3. To separate the net into two pieces, you need to cut all the strings along a specific row or column of the mesh.

4. The maximum number of strings you can cut will be the minimum number of strings needed to cut through the entire mesh either horizontally or vertically.

5. If you choose to cut the strings horizontally, there will be (m+1) strings to cut for each row. Similarly, if you choose to cut the strings vertically, there will be (n+1) strings to cut for each column.

6. Compare the number of strings to cut in both directions, and choose the direction with the minimum number of strings to cut.

7. The maximum number of strings that can be cut before the net falls apart into two pieces is the minimum between (m+1) and (n+1).

So, the maximum number of strings that can be cut before the volleyball net falls apart into two pieces, considering a mesh with m squares on the horizontal dimension and n squares on the vertical dimension, is min(m+1, n+1).

To know more about "Graph" refer here:

https://brainly.com/question/30934484#

#SPJ11

The 90% confidence interval for the true mean weight of the textbooks is approximately (70.062 ounces, 73.938 ounces).

Given that you measured 21 textbooks and found a mean weight of 72 ounces with a population standard deviation of 5.4 ounces, we can follow these steps:

1. Identify the sample size (n), sample mean (X), population standard deviation (σ), and confidence level (90%).

  n = 21
  X = 72 ounces
  σ = 5.4 ounces
  Confidence level = 90%

2. Determine the critical value (z) for a 90% confidence interval. For a 90% confidence interval, the critical value (z) is 1.645.

3. Calculate the standard error (SE) using the formula [tex]SE = \frac {σ }{\sqrt{n} }[/tex].

 [tex]SE = \frac{5.4}{\sqrt{21} } = 1.177[/tex]

4. Calculate the margin of error (ME) using the formula ME = z * SE.

  ME = 1.645 * 1.177 = 1.938

5. Construct the confidence interval using the formula: X ± ME.

  Lower limit = 72 - 1.938 = 70.062
  Upper limit = 72 + 1.938 = 73.938

Based on your measurements, the 90% confidence interval for the true mean weight of the textbooks is approximately (70.062 ounces, 73.938 ounces).

To know more about " confidence interval" refer here:

https://brainly.com/question/29680703#

#SPJ11

a)  The perimeter of the figure [tex]p = 12x + 19[/tex]

b) The perimeter of the figure when [tex]x = 4[/tex] is 67 units.

c)  The perimeter of the figure when[tex]x = 2[/tex] is 43 units

d)  The perimeter of the figure is [tex]3x^2 + 5x + 8[/tex] units.

a) The perimeter P of the figure is the sum of the lengths of its sides:

[tex]P = a + b + c + d[/tex]

Substituting the given expressions for a, b, c, and d in terms of x, we get:

[tex]P = (x + 7) + (2x + 2) + (8x) + (x + 10)[/tex]

[tex]= 12x + 19[/tex]

b) Substituting x = 4, we get:

[tex]P = 12x + 19[/tex]

[tex]= 12(4) + 19[/tex]

[tex]= 67[/tex]

Therefore, the perimeter of the figure when [tex]x = 4[/tex] is 67 units.

c) Substituting [tex]x = 2,[/tex] we get:

[tex]P = 12x + 19[/tex]

[tex]= 12(2) + 19[/tex]

[tex]= 43[/tex]

Therefore, the perimeter of the figure when[tex]x = 2[/tex] is 43 units.

d) Substituting the given expressions for a, b, c, and d in terms of x, we get:

[tex]P = x^2 + (4x + 8) + 2x^2 + x[/tex]

[tex]= 3x^2 + 5x + 8[/tex]

Therefore, the perimeter of the figure when[tex]a = x^2, b = 4x + 8, c = 2x^2,[/tex] and [tex]d = x[/tex] is [tex]3x^2 + 5x + 8[/tex] units.

To know more about Perimeter visit:

https://brainly.com/question/30252651

#SPJ4

The scale factor of the dilation of the circles is 5

From the question, we have the following parameters that can be used in our computation:

The circles

From the circles, we have the following parameters

Diameter of big circle Q = 20

Diameter of the small circle R = 4

Using the above as a guide, we have the following:

Scale factor of the dilation = Radius of big circle/Radius o the small circle

So, we have

Scale factor of the dilation = 20/4

Evaluate

Scale factor of the dilation = 5

Hence, the scale factor of the dilation is 5

Read more about scale factor at

brainly.com/question/29229124

#SPJ1

The correct answer about the savings account that Zoe opened, represented by the equation b(x)=675(1.045)ˣ is B. Daniella says the balance in the account increases at a rate of 4.5% each year.

An equation is a mathematical statement that two or more algebraic expressions (the combination of variables with constants and mathematical operands) are equal or equivalent.

This equation is known as the future value equation, formula, or function.

Initial investment = $675

Compound interest rate = 4.5% (0.045 x 100)

Future value factor = 1.045 (100% + 4.5%)

Based on the future value function above, we can conclude that the compound interest rate is 4.5%, which is equivalent to 0.045 as given in the equation.

Learn more about the future value equation at https://brainly.com/question/24703884.

#SPJ1

Applying the formula for the length of an arc, the measure of angle LMN is approximately: 164°.

The length of an arc (s) = ∅/360 × 2πr, where r is the radius of the circle.

Given the following from the image attached below, we have:

Reference angle (∅) = m<LMN

length of an arc (s) =  14.3 cm

Radius (r) = 5 cm

Plug in the values:

∅/360 × 2π × 5 = 14.3

∅/360 × 10π = 14.3

∅/360 = 14.3/10π

∅ = 14.3/10π × 360

∅  ≈ 164°

The measure of angle LMN ≈ 164°

Learn more about arc length on:

brainly.com/question/2005046

#SPJ1

The 99% upper bound for the binomial proportion P is 0.790. To find the necessary confidence bound for the binomial proportion P, we can use the formula: Upper bound = x/n + Zα/2√(x/n(1-x/n))

In this case, we are looking for a 99% upper bound, so Zα/2 = 2.576. Plugging in the given values, we get:
Upper bound = 24/55 + 2.576√(24/55(1-24/55))
          = 0.526 + 2.576(0.100)
          = 0.790
Therefore, the 99% upper bound for the binomial proportion P is 0.790.
Interpreting the interval, we can say that we are 99% confident that the true proportion of whatever we are measuring (which is represented by P) is no higher than 0.790. In other words, we can be fairly certain that the actual proportion falls within the interval from 0 to 0.790.

Learn more about binomials here: brainly.com/question/13870395

#SPJ11

We do not have enough evidence to conclude that the true mean melting point differs from 95 at a significance level of 0.01.

To determine if the true mean melting point differs from 95, we can use a one-sample t-test with a significance level of 0.01.

The null hypothesis is that the true mean melting point is equal to 95, and the alternative hypothesis is that the true mean melting point is different from 95.

We can calculate the t-statistic using the formula:

t = (sample mean - hypothesized mean) / (sample standard deviation / sqrt(sample size))

where sample size is 16, sample mean is 94.32, hypothesized mean is 95, and sample standard deviation is the same as the population standard deviation of 1.20.

Plugging in these values, we get:

[tex]t = (94.32 - 95) / (1.20 / \sqrt{(16)} ) = -2.6667[/tex]

Using a t-distribution table with 15 degrees of freedom (n-1=16-1), and a two-tailed test at a significance level of 0.01, the critical t-value is ±2.947.

Since our calculated t-value of -2.6667 falls within the acceptance region (-2.947 < -2.6667 < 2.947), we fail to reject the null hypothesis.

For similar question on  standard deviation.

https://brainly.com/question/31358088

#SPJ11

The diameter of the circle is determined as 20.12 units.

The radius of the circle is calculated by applying the following formula as shown below;

The let the distance between 9 and center of the circle O = x

The radius of the circle, r = 9 + x --- (1)

Draw a line from circumference from point 10 to center O, this line is the radius = r

Apply Pythagoras theorem;

r² = 10² + x² ------ (2)

From the first equation, recall, r = 9 + x

(9 + x)² = 10² + x²

81 + 18x + x² = 100 + x²

81 + 18x = 100

18x = 100 - 81

18x = 19

x = 19/18

x = 1.06

The radius of the circle = 9 + x

r = 9 + 1.06

r = 10.06

The diameter of the circle = 2r

= 2 x 10.06

= 20.12 units

Learn more about diameter of a circle here: https://brainly.com/question/28162977

#SPJ1

Answer:

78° + 95° + (2x + 115)° + 72° = 360°

(2x + 360)° = 360°, so x = 0.

Answer:

Step-by-step by steo

Total number of students = n(P∪M)=100

                   Number of students who passed in physics= n(P)=55

                   Number of students who passed in maths= n(M)=67

                   Number of students who passed both physics and maths=n(P∩M)

                   ⇒n(P∪M)=n(P)+n(M)−n(P∩M)

                   ⇒100=55+67−n(P∩M)

                   ⇒n(P∩M)=122−100

                   ⇒n(P∩M)=22

Step - 2 : Find number of students who passed only in physics

                   Number of students passed in physics = 55

                   Number of students passed in physics and maths both = 22

                   ∴Number of students passed only in physics = 55−22=33

The equation of the following line include the following: E. y = -2x .

In Mathematics and Geometry, the point-slope form of a straight line can be calculated by using the following mathematical equation (formula):

y - y₁ = m(x - x₁)

Where:

First of all, we would determine the slope of this line;

Slope (m) = (y₂ - y₁)/(x₂ - x₁)

Slope (m) = (8 - 0)/(-4 - 0)

Slope (m) = 8/-4

Slope (m) = -2.

At data point (-4, 8) and a slope of -2, a linear equation for this line can be calculated by using the point-slope form as follows:

y - y₁ = m(x - x₁)

y - 8 = -2(x + 4)  

y - 8 = -2x - 8

y = -2x

Read more on point-slope here: brainly.com/question/24907633

#SPJ1

The missing length of the triangle is given as follows:

x = 35 units.

The Pythagorean Theorem states that in a right-angled triangle, the square of the length of the hypotenuse (the longest side) is equal to the sum of the squares of the lengths of the other two sides.

The theorem is expressed as follows:

c² = a² + b².

In which:

For the triangle in this problem, we have that:

Hence the missing length is obtained as follows:

x² + 12² = 37²

x = sqrt(37² - 12²)

x = 35 units.

The image is blurry, hence the mistake in Jeff's part cannot be explained.

More can be learned about the Pythagorean Theorem at brainly.com/question/30203256

#SPJ1

The total percent composition for all the elements in the compound CgH10N402 is 61.73%.

To calculate the molecular mass of CgH10N402, we need to add up the atomic masses of all the atoms in the compound. The atomic masses can be found on the periodic table.

The molecular formula indicates that the compound contains:

1 carbon atom (C) with atomic mass of 12.01 g/mol

10 hydrogen atoms (H) with atomic mass of 1.01 g/mol

1 nitrogen atom (N) with atomic mass of 14.01 g/mol

4 oxygen atoms (O) with atomic mass of 16.00 g/mol

Molecular mass (M) = (1 x 12.01) + (10 x 1.01) + (1 x 14.01) + (4 x 16.00) = 162.14 g/mol

Therefore, the molecular mass for the compound CgH10N402 is 162.14 g/mol.

To determine the percent composition of each element in the compound, we need to divide the mass contribution of each element by the total molecular mass and multiply by 100%.

Percent composition of C:

Mass contribution of C = 1 x 12.01 g/mol = 12.01 g/mol

% C = (12.01 g/mol / 162.14 g/mol) x 100% = 7.41%

Percent composition of H:

Mass contribution of H = 10 x 1.01 g/mol = 10.10 g/mol

% H = (10.10 g/mol / 162.14 g/mol) x 100% = 6.23%

Percent composition of N:

Mass contribution of N = 1 x 14.01 g/mol = 14.01 g/mol

% N = (14.01 g/mol / 162.14 g/mol) x 100% = 8.63%

Percent composition of O:

Mass contribution of O = 4 x 16.00 g/mol = 64.00 g/mol

% O = (64.00 g/mol / 162.14 g/mol) x 100% = 39.46%

Therefore, the percent composition for the element C, H, N, O in the compound CgH10N402 are:

%C = 7.41%

%H = 6.23%

%N = 8.63%

%O = 39.46%

The total percent composition for all the elements in the compound must add up to 100%.

Total percent composition = %C + %H + %N + %O = 7.41% + 6.23% + 8.63% + 39.46% = 61.73%

Therefore, the total percent composition for all the elements in the compound CgH10N402 is 61.73%.

To learn more about composition visit:

https://brainly.com/question/27959251

#SPJ11

To create a plot with three different sine functions, we can use MATLAB code that includes the "plot" function, as well as specific parameters to set the ranges, colors, and styles of each line. First, we need to set up the x-axis range using the "range" function, which takes in the minimum, maximum, and step size values. In this case, we want the range to be from -6 to 6 with steps of 0.2, so we can write:

x = (-6:0.2:6);

Next, we can define each y value using the sine function and the corresponding multiple of x. For example, y1 corresponds to sin(x), so we can write:

y1 = sin(x);

Similarly, we can define y2 and y3 as:

y2 = sin(2*x);
y3 = sin(3*x);

Now, we can use the "plot" function to create a graph with all three sine functions plotted together. We want each function to be plotted with a different color, style, and legend label, so we can specify these parameters in the "plot" function call. Specifically, we want:

- y1 to be plotted in red and dashed
- y2 to be plotted in blue and solid
- y3 to be plotted in black and dotted
- a legend to be added with the labels 'sin(x)', 'sin(2x)', and 'sin(3x)'
- a title to be added with the label 'Multiple Plots'
- an x-axis label to be added with the label 'x'
- a y-axis label to be added with the label 'Sine functions'

Here is the complete code:

x = (-6:0.2:6);
y1 = sin(x);
y2 = sin(2*x);
y3 = sin(3*x);

plot(x, y1, 'r--', 'LineWidth', 1.5, 'DisplayName', 'sin(x)');
hold on;
plot(x, y2, 'b-', 'LineWidth', 1.5, 'DisplayName', 'sin(2x)');
plot(x, y3, 'k:', 'LineWidth', 1.5, 'DisplayName', 'sin(3x)');

title('Multiple Plots');
xlabel('x');
ylabel('Sine functions');
legend('show', 'Location', 'northwest');

grid on;
axis equal;

The "hold on" command ensures that all three plots are shown on the same graph. The "LineWidth" parameter sets the width of each line, and the "DisplayName" parameter sets the label for each line in the legend. Finally, the "grid on" and "axis equal" commands add a grid to the graph and ensure that the x and y axes are scaled equally.

Overall, this code will create a graph with three smooth sine functions plotted together, each with a different color, style, and legend label.

More on ranges: https://brainly.com/question/2264373

#SPJ11

angle 1 and angle 8 are alternate exterior angles.

option D.

Alternate exterior angles are pairs of angles that are located on opposite sides of a transversal line intersecting two parallel lines, and their values are equal.

These angles are positioned in such a way that they are outside of the two parallel lines, but on opposite sides of the transversal.

For the given diagram, the alternate exterior angles are determined as;

angle 1 and angle 8 are alternate exterior angles.

Learn more about exterior angles here: https://brainly.com/question/2546141

#SPJ1

The inequality is x > 9.5 and the numbers greater than 9.5

Given data ,

Let the inequality equation be represented as A

Now , the value of A is

55 < 6x - 2

Adding 2 on both sides , we get

6x > 57

Divide by 6 on both sides , we get

x > 9.5

So , x satisfies all numbers greater than 9.5

Hence , the inequality is x > 9.5

To learn more about inequality equations click :

https://brainly.com/question/11897796

#SPJ1

The non-permissible values are any values of n that would make the original equation undefined. In this case, there are no such non-permissible values.

a.

The given equation is:

[tex]1 + x^4 = x[/tex]

Rearranging terms, we get:

[tex]x^4 - x + 1 = 0[/tex]

To solve this equation, we can use the quartic formula:

x = [ -b ± sqrt( b^2 - 4ac ) ] / 2a

Here, a = 1, b = -1, and c = 1, so we have:

x = [ -(-1) ± sqrt( (-1)^2 - 4(1)(1) ) ] / 2(1)

x = [ 1 ± sqrt( -3 ) ] / 2

Since the discriminant is negative, the solutions are complex:

x = [ 1 ± i*sqrt(3) ] / 2

Therefore, the non-permissible values are any values of x that would make the original equation undefined. In this case, there are no such non-permissible values.

b.

The given equation is:

3^(n-1) / (3^n + 6) + 2^n = 0

To solve for n, we can start by simplifying the first term:

3^(n-1) / (3^n + 6) = 3^(-1) / (1 + 2*3^(-n))

Substituting this into the original equation, we get:

3^(-1) / (1 + 2*3^(-n)) + 2^n = 0

Multiplying both sides by (1 + 23^(-n)), we get:

3^(-1) + 2^n(1 + 2*3^(-n)) = 0

Simplifying, we get:

2^n + 2*3^(n-1) = 0

Dividing both sides by 23^(n-1), we get:

(1/2)(1/3)^n + 1 = 0

Multiplying both sides by -2 and taking the logarithm of both sides, we get:

n = log(2/3) / log(3) - log(2)

Therefore, the solution is:

n = log(2/3) / log(3) - log(2)

The non-permissible values are any values of n that would make the original equation undefined. In this case, there are no such non-permissible values.

To learn more about discriminant visit:

https://brainly.com/question/27484161

#SPJ11

Answer:

The answer to your problem is, [tex]7\frac{1}{9}[/tex]

Step-by-step explanation:

Calculation process:

= [tex]\frac{16}{3}[/tex] ÷ [tex]\frac{3}{4}[/tex]

= [tex]\frac{16}{3}[/tex] × [tex]\frac{4}{3}[/tex]

= [tex]\frac{16*4}{3*3}[/tex]

= [tex]\frac{64}{9}[/tex] = [tex]7\frac{1}{9}[/tex]

Thus the answer to your problem is, [tex]7\frac{1}{9}[/tex]

The situation that can use the binomial probability distribution is a sampling of 100 parts to determine whether or not they meet specifications.

The binomial probability distribution is used to model the probability of a certain number of successes in a fixed number of independent trials, where each trial has only two possible outcomes: success or failure. In the given situation, each part in the sample either meets the specifications (success) or does not (failure), which makes it a binomial experiment.

To use the binomial probability distribution, we need to know the probability of success (p) and the number of trials (n). In the given situation, we can determine the probability of a part meet specifications based on the given specifications, and the number of trials is fixed at 100, as we are sampling 100 parts.

Using the binomial probability distribution, we can calculate the probability of a certain number of parts meeting specifications out of the 100 sampled parts. This can be useful in determining whether the sample meets the expected specifications or if there are any issues with the manufacturing process.

In summary, the binomial probability distribution can be used in the given situation of sampling 100 parts to determine whether or not they meet specifications, as it involves a fixed number of independent trials with only two possible outcomes.

To learn more about Binomial distribution, visit:

https://brainly.com/question/29137961

#SPJ11

the total area under the curve is 2400.

To find the number of vehicles that pass the intersection between time t = 0 and time t = 8, we need to calculate the definite integral of the function R(t) from t = 0 to t = 8:

∫(0 to 8) R(t) dt

Looking at the graph of R(t), we can see that it consists of two parts: a rectangle with base 2 and height 600, and a triangle with base 6 and height 400. The area of the rectangle is 2 x 600 = 1200, and the area of the triangle is (1/2) x 6 x 400 = 1200. Therefore, the total area under the curve is 2400.

So, the number of vehicles that pass the intersection between time t = 0 and time t = 8 is:

∫(0 to 8) R(t) dt = 2400

Since R(t) is measured in vehicles per hour, this means that 2400 vehicles pass the intersection between time t = 0 and time t = 8. Therefore, the answer is 2400, which is not one of the given answer choices.

Visit to know more about Curve:-

brainly.com/question/29364263

#SPJ11

The participant's RER at that point in time was approximately 0.0009 (rounded to 4 decimal places).

To calculate the participant's Respiratory Exchange Ratio (RER) at that point in time, you will use the formula:

RER = VCO2 / VO2

Given the participant's VO2 was 1004 L/min and VCO2 was 0.932 L/min, plug these values into the formula:

RER = 0.932 / 1004

Now, divide 0.932 by 1004:

RER ≈ 0.0009

So, the participant's RER at that point in time was approximately 0.0009 (rounded to 4 decimal places).

Learn more about RER: https://brainly.com/question/12897185

#SPJ11

Answer:

mean- 4.9

median- 4

interquartile range- 7

Step-by-step explanation:

Hope this helps! :)