Answers
Answer:
a) The system is in equilibrium
b) No other force is acting on the system
Explanation:
a) The forces in a system is balanced until and unless there is equal and opposite force acting on the system. In this image the upward force is equal to the downward force on the book and the table and hence it is in equilibrium
b) An object which is in static mode, produces downward force because of weight and in response to that a normal reaction is produced in upward direction. Apart from these two forces, no other force is acting on this book and table system.
Related Questions
What do you plan to do this weekend !
( Giving out Branliest ) <3
Answers
Answer:
Go to the pool , Bake, sleep, Watch ,Movies, go out with my freinds<3
Explanation:
Which is least likely to occur after an experiment is conducted to a test a hypothesis?
The data is analyzed to see if it supports or refutes the hypothesis.
• The same experiment is conducted again to see if the data are reliable.
The hypothesis becomes a theory if the results support it.
O A new experiment is designed to provide additional data about the hypothesis.
Answers
Answer:
4th one. (A new experiment is designed to provide additional data about the hypothesis.)
Answer:
The correct answer is C)The hypothesis becomes a theory if the results support it.
Explanation:
(a) Using the expression Ka=[H+][A−][HA] , explain how to determine which solution has the lower pH , 0.10MHF(aq) or 0.10MHC2H3O2(aq) . Do not perform any numerical calculations.
Answers
Answer:
Ka=[H+][A−]/[HA]
which solution has the lower pH, 0.10MHF(aq) or 0.10MHC2H3O2(aq) :
Higher value of Ka indicates greater ionization thus more protons in solution, higher H+ concentration in solution means lower pH value.
Since HF have higher Ka have, thus HF solution will have lower pH.
The measurement is when the solution has the lower pH so HF should have higher ka.
Measurement when the solution has the lower pH?In the given solution, it contains the lower pH, 0.10MHF(aq) or 0.10MHC2H3O2(aq).
Here higher value of Ka represents the high ionization so there should be more protons in the solutions. and, the higher h+ concentration have the lower pH value.
So in the case when HF has higher Ka, due to this, HF solution will have lower pH.
Learn more about solution here: https://brainly.com/question/14619461
If the solubility of sodium chloride is 36 grams per 100 grams of water, which of the following solutions would be considered unsaturated? If the solubility of sodium chloride is 36 grams per 100 grams of water, which of the following solutions would be considered unsaturated? 3.25 moles of NaCl dissolved in 500 ml of water 1.85 moles of NaCl dissolved in 300 ml of water 5.8 moles of NaCl dissolved in 1 L of water none of the above
Answers
Answer: If the solubility of sodium chloride is 36 grams per 100 grams of water then 5.8 moles of NaCl dissolved in 1 L of water solution would be considered unsaturated.
Explanation:
A solution which contains the maximum amount of solute is called a saturated solution. Whereas a solution in which more amount of solute is able to dissolve is called an unsaturated solution.
Now, the number of moles present in 36 g of NaCl (molar mass = 58.4 g/mol) is as follows.
[tex]No. of moles = \frac{mass}{molar mass}\\= \frac{36 g}{58.4 g/mol}\\= 0.616 mol[/tex]
This shows that solubility of sodium chloride is 36 grams per 100 grams of water means a maximum of 0.616 mol of NaCl will dissolve in 100 mL of water.
So, a solution in which number of moles of NaCl are less than 0.616 mol per 100 mL then the solution formed will be an unsaturated solution.
As 5.8 moles of NaCl dissolved in 1 L (or 1000 mL) of water. So, moles present in 100 mL are calculated as follows.[tex]Moles = \frac{5.8 mol}{1000 mL} \times 100 mL\\= 0.58 mol[/tex]
Moles present in 100 mL of water for 3.25 moles of NaCl dissolved in 500 ml in water are as follows.[tex]Moles = \frac{3.25 mol}{500 mL} \times 100 mL\\0.65 mol[/tex]
Moles present in 100 mL of water for 1.85 moles of NaCl dissolved in 300 ml of water are as follows.[tex]Moles = \frac{1.85 mol}{300 mL} \times 100 mL\\= 0.616 mol[/tex]
Thus, we can conclude that if the solubility of sodium chloride is 36 grams per 100 grams of water then 5.8 moles of NaCl dissolved in 1 L of water solution would be considered unsaturated.
40 POINTS!!! Ice at 0.0 degrees C is combined with 50.0g of water at 75.0 degrees C. Calculate the grams of ice present initially if the entire mixture comes to a final temperature of 25.0 degrees C after the ice melts. Specific heat of water is 4.18 J/goC. SHOW WORK!
Answers
Answer:
mi = 31.28 g
Explanation:
According to the law of conservation of energy:
[tex]Heat\ Gain\ by\ Ice = Heat\ Lost\ by\ Water\\m_iL = m_wC\Delta T\\[/tex]
where,
mi = mass of ice = ?
L = Latent heat of fusion of ice = 334 J/g
mw = mass of water = 50 g
C = specific heat of water = 4.18 J/g.°C
ΔT = change in temperature of water = 75°C - 25°C = 50°C
Therefore,
[tex]m_i(334\J/g) = (50\ g)(4.18\ J/g.^oC)(50^oC)[/tex]
mi = 31.28 g
Write balanced equations for all the reactions in the catabolism of glucose to two molecules of glyceraldehyde 3-phosphate (the preparatory phase of glycolysis), including the standard free-energy change for each reaction. Then write the overall or net equation for the preparatory phase of glycolysis, with the net standard free-energy change.
Answers
Solution :
The balanced chemical equation are
The Catabolism of the glucose takes place in five stages :
1. Glucose + [tex]$ATP$[/tex] → glucose - [tex]$6$[/tex] - phosphate [tex]$+ ADP$[/tex] , [tex]$\Delta G^0=-16.7 \ kJ/mol$[/tex]
2. Glucose - [tex]$6$[/tex] - phosphate → Fructose - [tex]$6$[/tex] - phosphate , [tex]$\Delta G^0=1.7 \ kJ/mol$[/tex]
3. Glucose - [tex]$6$[/tex] - phosphate + [tex]$ATP$[/tex] → [tex]$ADP$[/tex] + Fructose - [tex]$1,6- \text{biophosphate}$[/tex], [tex]$\Delta G^0=-14.2 \ kJ/mol$[/tex]
4. Fructose - [tex]$1,6- \text{biophosphate}$[/tex] → dihydroxyacetonephosphate + glyceraldehyde [tex]$-3 - $[/tex] phosphate, [tex]$\Delta G^0=23.8 \ kJ/mol$[/tex]
5. Dihydroxyacetonephosphate → glyceraldehyde [tex]$-3 - $[/tex] phosphate , [tex]$\Delta G^0=7.5 \ kJ/mol$[/tex]
Therefore, the overall net equations
Glucose + [tex]$2ATP \rightarrow$[/tex] glyceraldehyde [tex]$-3 - $[/tex] phosphate + [tex]$2ADP$[/tex] [tex]$\Delta G^0=2.1 \ kJ/mol$[/tex]
1 Write the chemical symbols for following elements: Nitrogen-
Phosphorus- bromine- Zinc-Potassium-Magnesium.
Answers
Answer:
Look below
Explanation:
Nitrogen: N
Phosphorus: P
Bromine: Br
Zinc: Zn
Potassium: K
Magnesium: Mg
Hope this helps(would be very grateful if you mark this answer branliest bc i need for lvl up)
What type of consumer eats only producers?
Answers
Answer: Primary consumers make up the second trophic level. They are also called herbivores. They eat primary producers—plants or algae—and nothing else. For example, a grasshopper living in the Everglades is a primary consumer
Answer:
primary consumer make up the second trophic level .they are also herbivores they eat primary consumer plants or alger and nothing else .for example a grasshopper living in the everglades is a primary consumer
Did entropy increase or decrease?
1) 2 SO3 (g) → 2 SO2 (g)+O2 (g)
2) MgCO3 (s) + 2 H3O^+ (aq) → Mg^2+ (aq) + 3 H2 O(I) + CO2 (g)
Answers
Answer:
1) increase
2) increase
Explanation:
Entropy is the degree of disorderliness or randomness of a system. It is the measure of the unavailable energy in a system.
Entropy increases with increase in the number of particles. If the number of particles in a system increases from left to right, the entropy of the system increases accordingly.
In reaction 1, the number of particles from left to right increased from two to three hence the entropy was increased.
In reaction 2, the number of particles from left to right increased from three to five hence the entropy was increased.
Need help with this question please.
Answers
Answer:
12.8
Explanation:
14 = pOH + pH
pH = 14 - pOH
pH = 14 - 1.2
pH = 12.8
Electrolysis is used in the electroplating of metals. The same amount of current is passed through separate aqueous solutions of CuSO4, Sn(SO4)2 and Cr2(SO4)3 in separate electrolytic cells for the same amount of time. State and explain which cell would deposit the greatest amount (in mol) of metal. Identify the electrode at which the metal is deposited.
Answers
Answer:
CuSO4 cell will have the greatest amount of deposit among all three. The deposit will occur at the cathode
Explanation:
The valence of the elements in this case is as follows -
Cu - 2e-
Sn - 4e-
Cr - 3e-
CuSO4 cell will have the greatest amount of deposit among all three
The atoms of copper metal will deposit at the cathode. At the cathode, the least number of moles of electrons needed .
Hence, more amount of copper can be extracted out by the electrolyte
6.3x10-5M. What is the pH?
Answers
Answer:
https://sensorex.com/ph-calculator/
Explanation:
go to this link and then scroll down a little bit and then you'll find the answer
What is the greatest concentration of pollution
Answers
Answer:
B
Explanation:The poisonous substances, present in the environment can easily get into the trophic level as living organism depends on each other and environment for food and nutrition. These poisonous substances may not be broken down in the body or excreted easily, efficiently and quickly. Instead, they accumulate in the tissues, and as the living organism eats more, the concentration of these substances increases and they pass from one trophic level to the next. The tertiary consumer being at the top of trophic levels receives the maximum pollutant. This phenomenon is known as biological magnification.
So, the correct answer is option B.
Which of the following behaviors might indicate a patient is drug seeking?
A. A patient wants to avoid a specific medication because of
potential side effects.
B. A patient explains that she is from out of town and needs a
specific medicine because she left her prescription at home.
C. A patient fears her new prescription will conflict with another
medication she's currently taking.
D. A patient thinks she needs a smaller dose of her prescription
because it gives her headaches.
SUBMIT
Answers
Answer:
B is correct :)
Explanation:
Trust me I just took the test
temperature usually increase when water condenses which behavior of water is most directly responsible for this phenomenon?
Answers
Answer:
Temperature usually increases when water condenses. What behavior of water is most directly responsible for this phenomenon? The release of heat by the formation of hydrogen bonds. Hydrogen bonds stabilize and keep the of ice farther apart than the water molecules of liquid water.
A tree can be a _________________________ for insects in a schoolyard.
Answers
Answer:
habitat/shelter
Explanation:
Combine terms: 12a + 26b -4b – 16a.
Answers
Answer:
= -4a+22b
Explanation:
i hope this helps :)
Answer:
12a-16a =-4a
26b -4b =22b
the final answer is-4a +22b
Use the following chemical equation, how many moles of ammonia (NH 3 ) produced when 3.15 moles of nitrogen (N 2 ) reacts with hydrogen (H 2 ) ? N 2(g) + 3H 2(g) 2NH 3(g)
Answers
Answer:
[tex]n_{NH_3}^{produced}=6.3molNH_3[/tex]
Explanation:
Hello there!
In this case, according to the given chemical reaction, it is possible for us to use the 1:2 mole ratio of nitrogen to ammonia to calculate the moles of the latter that are produced when reacting 3.15 moles of the former with hydrogen as shown below:
[tex]n_{NH_3}^{produced}=3.15molN_2*\frac{2molNH_3}{1molN_2}[/tex]
Thus, by solving the equation we obtain:
[tex]n_{NH_3}^{produced}=6.3molNH_3[/tex]
Best regards!
20. Identi
21. Name the process and explain what is occurring at D.
Answers
Answer:
At D: Soil erosion us the process taking place.
Soil erosion is the washing away of the Earth's or soil's top layer by eroding agents.
Explain the difference between an exothermic and an endothermic reaction.
Answers
Answer:
Explanation:
Heat is a reactant.
If the equation requires heat to occur, the reaction is endothermic
The equation would have this model
A + B + heat =====> C + D
If the equation gives away heat, then it is exothermic
The equation would look like this. (I'll use a common reaction)
CH4 + 2O2 - heat ===> CO2 + 2H2O
The heat is minus when it has to be given away.
Which of the following is an ionization reaction?
a. H2SO4 (aq) + Ca(OH)2 (aq) → CaSO4 (s) + 2 H2O (l)
b. NH3 (aq) + H2O (l) ⇋ NH4+ (aq) + OH– (aq)
c. CH3COO– (aq) + H2O (l) ⇋ CH3COOH (aq) + OH– (aq)
d. None of these
e. H2O (l) + H2O (l) ⇋ H3O+ (aq) + OH– (aq
Answers
Answer:
d
Explanation:
help me plss plss.plsss.plsssplss plsss.plsss plsss plsss plsss
Answers
Answer:
1. Distance = 5 cm
Displacement = 1 cm
2. Distance = 7 cm
Displacement = 1 cm
3. Distance = 5 cm
Displacement = -1 cm
4. Distance = 6 cm
Displacement = -2 cm
5. Distance = 4 cm
Displacement = 0 cm
Explanation:
The distance an object travels is a measure of the total ground cobpvered bybthe object without regard to the direction of motion. It is a scalar quantity as it only takes into account magnitude but not the direction of a quantity.
Displacement however, is a measure of how far away or apart an object is from its starting position. It a vector quantity as it takes into account both the magnitude and direction in its measurement.
From the attachment provided, considering forward direction as positive and reverse as negative :
1. When a object moves from point 1 to point 4 and reverses to point 2.:
Distance = from 1 to 4 = 3 cm; from 4 back to 2 = 2 cm; 3 + 2 = 5 cm
Displacement = from 1 to 4 = +3 cm; from 4 back to 2 = -2 cm; 3 - 2 = 1 cm
2. When an object moves from point 1 to 5 and reverses to 2:
Distance = from 1 to 5 = 4cm; from 5 back to 2 = 3 cm; 4 + 3 = 7 cm
Displacement = from 1 to 5 = +4 cm; from 5 back to 2 = -4 cm; 4 - 3 = 1 cm
3. When an object moves from point 1 to 3 and then reverses to 0.
Distance = from 1 to 3 = 2 cm; from 3 back to 0 = 3 cm; 2 + 3 = 5 cm
Displacement = from 1 to 3 = +2 cm; from 3 back to 0 = -3 cm; 2 - 3 = -1 cm
4. When an object moves from point 3 to 5 and then reverses to 1:
Distance = from 3 to 5 = 2 cm; from 5 back to 1 = 4 cm; 2 + 4 = 6 cm
Displacement = from 3 to 5 = +2 cm; from 5 back to 1 = -4 cm; 2 - 4 = -2 cm
5. When an object moves from point 2 to 4 and then reverses to 3.
Distance = from 2 to 4 = 2 cm; from 4 back to 2 = 2 cm; 2 + 2 = 4 cm
Displacement = from 2 to 4 = +2 cm; from 4 back to 2 = -2 cm; 2 - 2 = 0 cm
calculate the percentage of CL in AL(CLO3)3
Answers
Answer:
38.4%
Explanation:
We'll begin by calculating the molar mass of Al(ClO₃)₃. This can be obtained as follow:
Molar mass of Al(ClO₃)₃
= 27 + 3[35.5 + (16×3)]
= 27 + 3[35.5 + 48]
= 27 + 3[83.5]
= 27 + 250.5
= 277.5 g/mol
Next, we shall determine the mass of Cl in Al(ClO₃)₃. This can be obtained as follow:
Mass of Cl in Al(ClO₃)₃ = 3 × Cl
= 3 × 35.5
= 106.5 g
Finally, we shall determine the percentage of Cl in Al(ClO₃)₃. This can be obtained as follow:
Mass of Cl in Al(ClO₃)₃ = 106.5 g
Mass of Al(ClO₃)₃ = 277.5 g
Percentage of Cl =?
Percentage of Cl = mass of Cl / mass of Al(ClO₃)₃ × 100
Percentage of Cl = 106.5 / 277.5 × 100
Percentage of Cl = 38.4%
what is the formula for tin(III) sulfate
Answers
Answer:
SnSO₄
Explanation:
Tin(II) sulfate is a chemical compound. It is a white solid that can absorb enough moisture from the air to become fully dissolved, forming an aqueous solution; this property is known as deliquescence.
Answer:
please give me brainlist and follow
Explanation:
SnSO₄
Which product is often derived from the natural environment?
Answers
Answer:
coal, cotton, chinese tradictional medicine
How many grams of H2SO4 will react 650.0 grams of NaOH?
Answers
Answer:
H2SO4 + 2NAOH➡NA2SO4+2H2O
H2SO4 = 1*2 +32+16*3= 98g
NAOH = (11+16+1)=28
Explanation:
To calculate the number of Mole = Mole *Molar Mass
To calculate for gram = Mole/ Molar Mass
20.5g NaoH/1 * 1 mole NaOH/28g NaoH = 0.73M NaoH
0.73M NaoH /1 * 1 M H2SO4 /2M NaoH = 0.37M H2SO4
0.37 M H2SO4 /1 * 98g H2SO4 /1M H2SO4 = 0.00367g H2SO4
:- 0.00367g of Sulphuric Acid will be needed to complete the reaction.
What is NaC2H3O2 coefficient
Answers
Answer:yes coefficient u mean??
Explanation:
CHEMISTRY HELP ASAP
Use this balanced equation for the two questions below:
2KClO3(s) → 2KCl(s) + 3O2(g)
9. How many moles of KClO3 are used to produce 9.9 moles of O2?
10. How many moles of O2 are produced from 11.2 moles of KClO3?
PLS SHOW WORK TOO THX
Answers
Answer:
1 mole of KClO_3 contains 3 moles of O.
10 moles of O_2 contains 20 moles of O.
You need 20/3 moles of KClO_3 to produce 10 moles of O_2
Explanation:
sana makatulong
Arenediazoniums can undergo electrophilic aromatic substitutions with a wide variety of activated aromatic compounds to yield new azo dyes.
a. True
b. False
Answers
I did this last year and it’s false
Which of the following patients should be admitted as an inpatient at a
hospital?
A. Katie's having her tonsils removed and will be able to go home
shortly after she wakes up from surgery.
B. Phil's having his blood sugar tested and having his annual
physical
c. Salvatore's having a hip transplant and will need to be closely
monitored for a week.
D. Chen's having chest X-rays taken to determine if he has a broken
rib.
SUBMIT