The reactivities of tert-butyl bromide and 2-bromopropane are related to the stabilities of the carbocations produced as intermediates in the reaction in several ways.
First, it is important to note that tert-butyl bromide has an electron-withdrawing group (carbonyl) attached to its aromatic ring. This makes it more reactive than 2-bromopropane because it is easier for tert-butyl bromide to achieve a favorable resonance structure.
Second, it is also important to note that tert-butyl bromide has a more stable carbocation intermediate than 2-bromopropane because it has a larger number of bonds between carbon atoms. This means that these bonds take longer to break apart during the transition state, which makes it harder for tert-butyl bromide's intermediate to form.
To learn more about carbocations visit: https://brainly.com/question/9223628
#SPJ4
for a given sample of ch3oh , the enthalpy change during the reaction is 82.7 kj . what mass of methane gas is produced?
For a given sample of ch3oh , the enthalpy change during the reaction is 82.7 kj. The mass of the methane gas will be 32 gram.
When methanol will provide some temperature, then it will break into methane and oxygen gas and release some amount of energy.
The balanced chemical equation can be written as:
[tex]2CH_{3}OH[/tex]→ [tex]2CH_{4} + O_{2}[/tex], ΔH= 82 kJ
It can be seen that 2 mole of methane will produce 82 kj energy.
Hence, the energy of 82.3kj the count of mole could be = (2×82.3)/82
= 2 moles
The mass will be equivalent to the = 2 × 16 = 32 g
Therefore, the mass of [tex]CH_{4}[/tex] produced will be 32g
To know more about enthalpy change
https://brainly.com/question/24259325
#SPJ4
If 2 isotopes of Osmium existed, Os-190 and Os-191, which one would have the highest percent abundance?
The isotope that has the highest percent abundance is Os-190.
What is the relative atomic mass of Osmium?We know that the amount of the element that can be found in the universe does differ because the element is composed of isotopes. The isotopes are the atoms of the element that have the same atomic number but does have different mass numbers.
Now we know that the two common isotopes of osmium are Os-190 and Os-191. The isotope that would have the highest percent abundance is the isotope whose mass is closer to the relative atomic mass of osmium which is 190.23.
Learn more about Osmium:https://brainly.com/question/10283863
#SPJ1
In which of these statements are protons, electrons, and neutrons correctly compared?
Quarks are present in protons and neutrons but not in electrons.
Quarks are present in protons, neutrons, and electrons.
Quarks are present in neutrons and electrons but not in protons.
Quarks are present in protons and electrons but not in neutrons.
In the nucleus, proton and neutron are present. Electron has -1 charge while proton has +1 charge. Neutron is neutral that is it has no charge. So overall the charge of nucleus is due to only proton, not by neutron. The correct option is option A.
What is atom?Atom is the smallest particle of any element, molecule or compound. Atom can not be further divided. Atoms contains nucleus in its center and electron that revolve around the atom in fixed orbit.
Quarks are present in protons and neutrons but not in electrons. Quarks are sub-atomic particles that have mass, but not an integer of charge.
Therefore, the correct option is option A.
To know more about atom, here:
https://brainly.com/question/13518322
#SPJ1
the solubility of n2 gas in blood is 6.1e-4 when the partial pressure of n2 gas is 1 atm and the temperature is 37 c if a scruba diver breathes compressed air with a total air pressure of 3 atm what is the solubility of n2 in her blood
The partial pressure of nitrogen gas is 1.43 x 10^-3 M to be exact, but we can also consider it as 1 atm.
Partial pressure can be defined as- if a container filled with more than one gas, each gas exerts pressure. The pressure of anyone gas within the container is called its partial pressure.
As we know, pressure is the force per unit area. Partial pressure can be the pressure half-filled the area.
Ideal gas behavior allows gas mixtures to be specified simply. In particular, the ideal gas law holds for each component of the mixture separately. Each component exerts its own pressure referred to as its partial pressure.
Partial pressure is the measure of the thermodynamic activity of gas molecules. The gasses diffuse and react based on their partial pressures and not concentrations in a gaseous mixture.
Complete question: -
The solubility of N2 gas in blood is 6.10 x 10^-4M when the partial pressure of N2 gas is 1.00 atm and the temperature is 37-degree C. If a scuba diver breathes compressed air with a total air pressure of 3.00 atm, what is the solubility of N2 in her blood?
Learn more about partial pressure and related numerical from,
https://brainly.com/question/16107946
#SPJ4
Choose the nonmetallic elements from the list. Check all that apply.
Oyttrium
oxygen
boron
Opolonium
argon
gallium
carbon
find the volume of 0.250 m sulfuric acid necessary to react completely with 74.3 g sodium hydroxide.
The volume of 0.250 m sulfuric acid necessary to react completely with 74.3 g sodium hydroxide is 3.7 L.
The chemical reaction of sulfuric acid and sodium hydroxide is given as below:
H2SO4 + 2NaOH ------- Na2SO4 + 2H2O
From above, we noticed that, one mole of sulfuric acid react with two moles of sulfuric acid.
Therefore, firstly we convert grams of sulfuric acid into moles.
As we know that, molar mass of sodium hydroxide is 40 g.
What is mole?It is defined as the given mass to the molar mass of substance.
Mathematically,
Moles = Given mass / molar mass
Given mass of sulfuric acid = 74.3 g
By substituting all the values, we get
Moles = 74.3 / 40
= 1.85 mol
So, 1/2 moles of sulfuric acid one moles of sodium hydroxide.
Or, 1.85 moles of sodium hydroxide react with 1/2 × (1.85) moles of sulfuric acid.
1.85 moles of sodium hydroxide react with 0.925 moles of sulfuric acid.
Now,
Concentration of sulfuric acid = 0.250 M
Moles of sulfuric acid = 0.925 mol
C = m/ V
V = m/ C
= 0.925/ 0.250 = 3.7 L
Thus, we concluded that the volume of 0.250 m sulfuric acid necessary to react completely with 74.3 g sodium hydroxide is 3.7 L.
learn more about Moles:
https://brainly.com/question/15209553
#SPJ4
Zn(s)+HNO3(aq)⟶Zn(NO3)2(aq)+H2(g)
Express your answer as a chemical equation. Identify all of the phases in your answer. Keep the order of compounds as in the original equation.
Start by assigning oxidation numbers to the atoms that take part in the reaction.
notice that the oxidation state of zinc changes from zero on the reactants' side to +2 on the products' side, which means that it is being oxidized.
Now take a look at nitrogen's oxidation state. Notice that some nitrogen atoms keep their oxidation state constant, i.e. +5 on both sides of the equation, but that other nitrogen atoms change their oxidation state from +5 to -3, which implies that they are being reduced. Balance the nitrogen atoms first by multiplying the nitric acid by 2. Since you're in acidic solution, you can balance the hydrogen atoms by adding protons,
H
+
, to the side that lacks hydrogen, and oxygen atoms by adding water molecules to the side that lacks oxygen.
Since you only need to balance the hydrogen atoms present on the reactants' side.
Hope that can start you off! And hope that helps!
The balanced chemical equation of the given reaction is written as follows:
[tex]\rm Zn(s)+2HNO_3(aq) \rightarrow Zn(NO_{3})_2(aq)+H_2(g)[/tex]
What is a balanced chemical equation?A balanced chemical equation is a symbolic representation of a chemical reaction that shows the exact number of atoms of each element present in both the reactants and the products.
In a balanced equation, the total number of atoms of each element on the reactant side of the equation must be equal to the total number of atoms of that element on the product side of the equation.
This ensures that the law of conservation of mass is upheld, which states that matter cannot be created or destroyed in a chemical reaction, only rearranged.
The balanced chemical equation is written above.
Find more on balanced reactions:
https://brainly.com/question/15052184
#SPJ2
what happens to the solubility of mgco3 in water if 0.1 m hno3 is added to the solution at 298 k? (ksp
The solubility of MgCO3 in water will increase if 0.1m HNO3 is added to the solution at 298k.
Magnesium carbonate (MgCO3) is basic in nature and insoluble in water but when 0.1m HNO3 (acidic) is added the MgCO3 will dissociate due to the opposite nature that is MgCO3 is basic and HNO3 is acidic. This will lead to an increase in solubility. The balanced equation of this reaction is:
MgCO 3 (s) + 2 HNO 3 (aq) → Mg(NO 3) 2 (aq) + CO 2 (g) + H 2O (l)
The equilibrium constant for the dissolution of a solid substance into an aqueous solution is the solubility product constant. Ksp is used to represent it.
A type of equilibrium constant, the solubility product's value changes with temperature. Due to increasing solubility, Ksp often rises as temperature rises.
A substance's ability to dissolve in a solvent to create a solution is known as a substance's solubility. Ionic compounds, which separate into cations and anions, have a wide range of solubilities in water. While other substances are exceedingly insoluble, some are highly soluble and may even absorb moisture from the air.
For more information on solubility product constant kindly visit to
https://brainly.com/question/1419865?
#SPJ4
how do you write a chemical equation for a chemical reaction
The ways to write a chemical equation for a chemical reaction are:
Determine the reactant and product types.Each of the reactants and products should have a chemical formula, so write it down.Find out how many of each kind of atom there are in the reactants and products.Equilibrate the variables (Balance the equation)What is the term chemical reaction?
In a chemical reaction, reactants undergo a chemical reaction and transform into products through a chemical process. For instance, By inhaling oxygen, which then combines with glucose to produce carbon dioxide, water, and energy, we are able to breathe. The response is provided below. C6H12O6 + O2 = 6CO2 + 6H2O + Energy.
Note that Reactants are the substances that are changing and are written on the left-hand side of the equation. Products are the newly produced substances.
Learn more about chemical reaction from
https://brainly.com/question/11231920
#SPJ1
suppose you burn a 3.0 g sample of potato chips. you use the heat given off from that process to heat 26.8 g of water from 16.4 oc to 21.4 oc. what is the caloric value (in kcal/g) of the potato chips?
The caloric value(in kcal/g) of the potato chips is 0.04467 kcal/g.
Heat absorbed by water:
[tex]Q=m.C.T\\Q=26.8 * (21.4-16.4)*1\\Q=0.134[/tex]
The caloric value of potato chips :
=Kcal/grams of potato chips
[tex]=0.134/3.0\\=0.04467 Kcal/g[/tex]
How to calculate heat absorbed?
Q = mc∆T
Q means heat (what you want to know), m means mass, c means the specific heat capacity and ∆T is the change in temperature. You can find the change in temperature by subtracting the starting temperature from the final temperature.What is caloric value?
A food calorie is actually a “kilocalorie.” In other words, it is the amount of energy needed to raise the temperature of one liter of water by one degree.
Thus, the caloric value of the potato chips is 0.004467Kcal/g
To know more about heat absorbed:
https://brainly.com/question/8828503
#SPJ4
Joe measured 60.1 mL for the volume of the object. The actual volume of the object was 54.6 mL. What is the percent error of Joe’s results?
The percent error of Joe’s results is equal to 10.07 %
What is the percent error?The percent error can be described as the difference between the actual value and the measured or approximate value. The percent experiment is used in scientific experiments to check the accuracy of the experimental results.
The mathematical formula of the percent error can be represented as:
Percentage error = (Measured value - Exact value)/Exact value] ×100
Given, the volume measured by Joe = 60.1 ml
The actual volume of the object = 54.6 ml
The percent error = (60.1 - 54.6)/54.6] ×100 = 10.07 %
Therefore, the percentage error of Joe's results is 10.07 %.
Learn more about percent error, here:
https://brainly.com/question/3105259
#SPJ1
what type of evidence have scientists collected and studied from deep ice cores that shows a correlation between changes in global climate with methane and carbon dioxide levels?
A correlation between changes in global climate with methane and carbon dioxide levels is Variations in ice layer color and thickness.
Ice cores provide direct information about how greenhouse gas concentrations have changed in the past, and also provide direct evidence that climate can change rapidly. By examining the gas trapped in the ice core, scientists learned the amount of carbon dioxide for the first time.
Global temperature has been associated with at least the last million years of Earth's history. A particularly powerful correlation technique is to use the composition of atmospheric gases trapped in ice bubbles. Since most gases remain in the atmosphere long enough to be well mixed on a global scale, ice cores around the world simultaneously exhibit the same atmospheric composition with trapped gas bubbles.
Learn more about Carbon dioxide levels here:-https://brainly.com/question/25385913
#SPJ4
if the reaction tube is washed with water but not dried thoroughly, what side product is formed (draw the reaction in pen and name the product)?
In a Grigmand reaction experiment, all the glass wake washed are complete without water druplet and dried leaving a single aIf it's not dried properly I molecules properly I water Hem aims im tube then this water as am acid the test molecule acts.
We realize Grignard reagents are robust bases one hundred twenty acts as an acid wherein. An or by derivative is a secondary by-product derived from a production system, manufacturing manner, or chemical reaction it is not the primary service or by-derivative being produced. facet products are impurities that appear throughout the response because of aspect reactions that may be opportunity response pathways or similar reactions.
An aspect reaction is a chemical response that occurs at an equal time as the actual foremost response, however to a lesser volume. It results in the formation of. A facet reaction is a reaction that produces a distinct spinoff aside from the preferred derivative. It happens concurrently with the principal reaction but to a lesser extent. for instance, when phenol is reacted with nitric acid the main reaction is the formation of o-nitrophenol.
Learn more about The reaction tube here:-https://brainly.com/question/26400103
#SPJ4
the average atomic mass between the two isotopes is 63.546 amu. calculate the relative atomic mass of 65 cu
The mass of the 65Cu isotope can be determined using the formula below. - To obtain the mass of the 65Cu isotope, replace all the known values in the formula above. - The mass of the 65Cu isotope is therefore 64.9233 amu. So, "Option C" is the right response.
Average atomic mass of copper=63.546 amu
On putting given values we get:
63.546= 100
62.9298 ×69.09+M
2 ×30.91
on solving we will get mass of 65
Cu isotope =64.9233
What is Atomic Mass ?The total mass of an atom is made up of all of its protons and neutrons.
"Isotopes" is the name used to describe atoms having differing atomic weights caused by various neutron counts. The protons in isotope elements are the same, but the neutron content varies.
The total mass of the protons and neutrons in an atom's nucleus is known as its atomic mass. With 6 protons and 7 neutrons in its nucleus, this carbon isotope has a 13-atom mass, or 7+6=6. It has an atomic mass of 13 mass units. (amu).
To know more about Atomic mass please click here ; https://brainly.com/question/338808
#SPJ4
which of the following carbonate compounds is soluble in water? select the correct answer below: ag2co3 caco3 (nh4)2co3 pbco3 feedback
Alkali carbonates are soluble in water so (NH₄)2CO₃ sodium carbonate and potassium carbonates are soluble in water.
What is compounds and examples?A composite is a material comprised of two or more constituent parts. Examples of molecules are carbon dioxide, freshwater, and table salt. a substance produced by the chemical joining of two or three dissimilar components. Examples of compounds are salt (NaCl), which is made up of chloride and sodium atoms, and water (H2O), which would be made up of hydrogen and oxygen atoms.
How are compounds formed?When a group of atoms unite to form a pure material, a compound is created. These can be reduced to their individual atoms. Atoms from the reactants interact during chemical reactions to create new compounds. Reactants are the species that are reacting, while products are the results of the reaction.
To know more about Compound visit:
https://brainly.com/question/14117795
#SPJ4
given that the principal quantum number is n, the number of orbitals in each principal energy level is given by the expression .
The formula 2n², where n is the primary energy level, can be used to calculate the maximum amount of electrons in each energy level (first quantum number).
Where are the orbitals?The nucleus is the center of the orbits. One orbital will be larger than the others if an atom has several orbitals, or they will overlap. Additionally, an atom is perhaps most likely to occur in the electron shells. Orbitals, or groups of electrons arranged in a cloudlike pattern, surround the nucleus.
What shape do orbitals take?The highest level of probability for an electron to exist is in an atom's nucleus. The route that electrons travel while navigating the restrictions of the circle is referred to as a subshell. There are four different subshell classifications. The letters s, p, d, & f are used to identify the such.
To know more about Orbitals visit:
https://brainly.com/question/18914648
#SPJ4
Complete the following nuclear reaction equ
1.
155
63
Eu → e +
0
-1
Nuclear equation: ninety-two 238 U → ninety 234 T h + 2 4 H e + power.
In nuclear physics and nuclear chemistry, a nuclear response is a method in which two nuclei, or a nucleus and an external subatomic particle, collide to supply one or greater new nuclides. accordingly, a nuclear response need to purpose a transformation of at the least one nuclide to some other.
Nuclear Fusion reactions electricity the sun and other stars. In a fusion response, two light nuclei merge to form a single heavier nucleus. The method releases strength due to the fact the whole mass of the resulting single nucleus is less than the mass of the two unique nuclei. The leftover mass turns into energy.
Nuclei with too many neutrons, too few neutrons, or which might be absolutely too massive are risky. They eventually rework to a stable form thru radioactive decay. wherever there are atoms with risky nuclei, there are nuclear reactions taking place clearly.
Learn more about the nuclear reaction here;-https://brainly.com/question/25387647
#SPJ1
The incomplete table below shows selected characteristics of gas laws.
Name
Variables
Constants
Equation
?
?
PV = k
Charles's law
?
V= kT
?
Temperature, pressure
?
P= kT
Combined gas law
Pressure, temperature, volume
?
?
Which constants would most likely be filled in the first row of the table?
O temperature and moles of gas
• volume and temperature
pressure and volume
O pressure and moles of gas
The complete table shows characteristics of gas law :
Variables constant Equation
Boyles law pressure , volume Temperature PV = k
Charles law volume ,temperature pressure V = kT
Gaylussac law pressure, temperature volume P = kT
combined pressure, temperature no. of moles PV = kT
gas law volume
1) The Boyles law states that : The pressure of the gas is inversely proportional to volume of gas.
P ∝ 1/V
PV = k
k is constant
2) The Charles law `states that at constant pressure the volume is directly proportional to temperature of gas.
V ∝ T
V = kT
3) The gay - lussac law states that at constant volume pressure is directly proportional to temperature.
P ∝ T
P = kT
4) The combined gas law is the combination of temperature , pressure and volume .
PV = kT
Thus, The complete table shows characteristics of gas law :
Variables constant Equation
Boyles law pressure , volume Temperature PV = k
Charles law volume ,temperature pressure V = kT
Gaylussac law pressure, temperature volume P = kT
combined pressure, temperature no. of moles PV = kT
gas law volume
To learn more about gas law here
https://brainly.com/question/12669509
#SPJ1
Answer:
The answer is A: temperature and moles of gas
Edge 2023
Which model was developed after alpha particles were bombarded onto sheets of gold?.
After alpha particles were bombarded onto sheets of gold, the Rutherford model was developed. This model proposed that the atom was composed of a small, dense, positively charged core called the nucleus, with electrons orbiting around this nucleus.
The Rutherford model is a model of the atom that was proposed by Ernest Rutherford in 1911. It was based on his experiments with alpha particles. In the model, the atom is composed of a small, dense nucleus with positive charge surrounded by electrons that orbit the nucleus. The Rutherford model is unable to explain the stability of atoms and the nature of the electromagnetic force, but it did provide a starting point for the development of more sophisticated models of the atom.
Learn more about Electromagnetic force at : https://brainly.com/question/13191643
#SPJ4
Is using matches to light a candle physical or chemical change ?
Answer:
It's a chemical change.
Explanation:
The process of burning (as opposed to evaporating) is a chemical reaction, a chemical change. The wax molecules are undergoing a chemical change; they are changing into different molecules by reacting with a substance in the air.
an insulated rigid tank contains 5 kg of air at 15 oc and 100 kpa. an electric resistance heater inside the tank is now turned on and kept on until the air temperature rises to 40 oc. determine the entropy change of the air during this process.
Answer is Δs=0.3kJ/K
Since, the tank is insulated rigid tank, The process is constant volume process,
Air as perfect gas
Obtain the properties from the table. Consider th state 1. P=100kPa, T, = 15°C
s=6.830kJ/kg-K
v=0.827 m³/kg
Constant volume process,
Consider the state 2. T = 40°C, v, v = 0.827 m²/kg
5,6.890 kJ/kg-K
Calculate the change in entropy,
Δs=m(s, -s) =5(6.890-6.830)
Δs=0.3kJ/K
You can learn more about this at:
brainly.com/question/12048893#SPJ4
what would a rotational spectrum look like (how many peaks would be present and how far apart would they be)? you must show how you arrived at the spacing between peaks
The rotational spectroscopy looks like many peaks joined together in the shape of parabola. The number of peaks depends on the shape of the molecule. The peaks are 2B distance apart from each other.
What is rotational spectroscopy?
Rotational spectroscopy is an absorption spectroscopy where the energies of transitions between the energy levels of a molecule in the gas is measured. It is also called as microwave spectroscopy. Rotational spectroscopy only works on the molecules which have permanent dipole moment.
In rotational spectroscopy each line represents a transition between energy levels.
E = BJ (J+1)
where J = energy level, B = rotational constant.
When the transition is from J = 0 to J = 1,
E = E(f) - E(i) = B x 1 (1+1) - B x 0 (0+1) = 2B - 0B = 2B.
Therefore, the spacing between the peaks in Rotational spectroscopy is 2B. The number of peaks depends on the shape of the particular molecule.
To learn more about Rotational spectroscopy click on the link below https://brainly.com/question/28215058
#SPJ4
(Digestion, Intestine, Bile)is secreted by the liver to help in the breaking down of food particles.
Answer:
Bile
Explanation:
Bile is secreted by the liver to help in the breaking down of food particles.
in the affinity chromatography lab which type of interaction will be utilized to purify lactate dehydrogenase?
Two lactate dehydrogenase isoenzymes interacting
what is affinity chromatography?
Affinity chromatography is a technique for extracting a biomolecule from a mixture that relies on a very particular macromolecular binding relationship between the biomolecule and another component. Depending on the biomolecule of interest, the specific type of binding contact may be between an antigen and an antibody, an enzyme and a substrate, a receptor and a ligand, or a protein and a nucleic acid. Binding interactions are routinely used to isolate different biomolecules. When compared to other chromatographic techniques, affinity chromatography is advantageous due to its high selectivity and resolution of separation.
In order to study the effects of pH and temperature on lactate dehydrogenase binding, immobilized NAD+ matrices were used to study the interactions of two isoenzymes of lactate dehydrogenase from pig heart muscle (H4) and rabbit skeletal muscle (M4). Investigated was how substrate, product, and sulphite affected the binding of heart muscle lactate dehydrogenase to immobilised NAD+. It was determined how the two lactate dehydrogenase isoenzymes interacted with immobilised pyridine and adenine nucleotides and their derivatives. Correlations between these factors' effects on lactate dehydrogenase's interaction with immobilised nucleotides and the known kinetic and molecular characteristics of the enzymes in free solution were found.
to learn more about affinity chromatography go through the following limk: https://brainly.com/question/15004427
#SPJ4
It is necessary in certain types of experiments to begin by heating a crucible to constant mass. Identify the steps in this process.
Certain types of experiments must begin by heating a crucible to constant mass. The steps in this process are stated below:
Crucible is heated using a Bunsen burner for several minutes.The crucible is allowed to cool down.The mass of the crucible is being measured.Steps 1 to 3 is being repeated as much as needed to obtain a constant value.What is the purpose of heating a crucible?Heating a crucible is very crucial to maintain the measurement as thoroughly as possible. The porcelain crucibles are hygroscopic as they absorb weighable moisture from the air. We could get rid of moisture as much as possible by heating it.
Learn more about crucible here https://brainly.com/question/27816330
#SPJ4
Chromium (Cr) can combine with chlorine (Cl2) to form chromium chloride (CrCl3).
Which equation is a correct representation of this reaction?
Responses
2Cr + Cl2 → CrCl3
2 upper case C lower case r plus upper case C lower case l subscript 2 end subscript rightward arrow upper case C lower case r upper case C lower case l subscript 3 end subscript,
Cr + Cl2 → CrCl3
upper case C lower case r plus upper case C lower case l subscript 2 end subscript rightward arrow upper case C lower case r upper case C lower case l subscript 3 end subscript,
2Cr + 3Cl2 → 2CrCl3
2 upper case C lower case r plus 3 upper case C lower case l subscript 2 end subscript rightward arrow 2 upper case C lower case r upper case C lower case l subscript 3 end subscript,
2Cr + 3Cl2 → CrCl3
The combination of the chlorine and the chromium species is designated by the reaction [tex]2Cr + 3Cl_{2} ------- > 2CrCl_{3}[/tex]. Option B
What is the correct representation?We know that the term reaction has to do with the way in which two atoms are combined in a compound. Now, the reaction must be balanced. This implies that the number of atoms on the reactant side must be the same as the number of atoms on the products side.
We are talking about how to write the reaction between the chromium atom and the chlorine atom. We know that we have to find out which of the reaction is balanced and that is; [tex]2Cr + 3Cl_{2} ------- > 2CrCl_{3}[/tex]
Learn more about reaction:https://brainly.com/question/28984750
#SPJ1
Electronic configuration An element's atomic number tells you the number of _______________ in the nucleus. The number of in an atom is equal to the number of In the first shell of an atom there are shell there are_______ electrons. In the third shell there are electrons. electrons. In the second
Answer:
Electronic configuration An element's atomic number tells you the number of protons in the nucleus. The number of protons in an atom is equal to the number of electrons. In the first shell of an atom there are 2 electrons. In the third shell there are 18 electrons.
given the electronegativity values of c (2.5), n (3.0), o (3.5), and s (2.5), which of the following molecules have polar bonds? question 34 options: a) smog, no2 b) carbon dioxide, co2 c) sulfur dioxide, so2 d) all of the above e) none of the above
Given the electronegativity values of c (2.5), n (3.0), o (3.5), and s (2.5), The following molecules have polar bonds answer is all of the above.
There is bond between carbon and oxygen. So , bund is polar . since they have different electro negativities
The electronegativityes O' and s'are different. so, bond is polar and There is difference is electronegativityes between N and O, Sois polar bond.
When an atom of a certain chemical element forms a chemical bond, it has a propensity to draw shared electrons, which is denoted by the symbol, which stands for electronegativity. The atomic number of an atom and the separation of its valence electrons from the charged nucleus both have an impact on how electronegtive that atom is. The atom is more in need of an electron when the electronegativity is higher. o Electronegativity grows across a period from left to right. o The attraction of an atom on the electrons in a bonding pair is strongest when the valence shell is nearly full.
Learn more about electronegativity here:
https://brainly.com/question/17762711
#SPJ4
4
How do you write 880% as a fraction, mixed number, or whole number?
Submit
Explanation:
a fraction 880/1000 or 22/25
mixed number 44/5
whole number 8
(1) what is the complete ground state electron configuration for the nitrogen atom? (2) what is the complete ground state electron configuration for the vanadium atom?
The ground state electronic configuration of Nitrogen atom is 1s²2s²2p³
The ground state electronic configuration of vanadium atom is 1s²2s²2p⁶3s²3p⁶4s²3d³
What is electronic configuration?Electron configuration is the distribution of electrons within an atom or molecule (or other physical structure) in atomic or molecular orbitals. For example, the electron configuration of the neon atom is 1s²2s²2p⁶. This means that the 1s, 2s and 2p subshells have 2, 2 and 6 electrons respectively.
The electronic configuration of a type of atom (neutral or ionic) allows us to understand the shape and energy of its electrons. Many general rules are followed in assigning an electron's "position" to its possible energy states, but these assignments are arbitrary and it is always unknown which electron is being described. Knowing the electronic configuration of a species allows us to better understand its binding ability, magnetism and other chemical properties.
To know more about electronic configuration visit:
https://brainly.com/question/13497372
#SPJ4