Answer:
a
Explanation:
Prevailing winds can cause a milder climate with heavy rain is the change that affects the short-term climate in a region, hence option A is correct.
What is wind currents?Concentrated areas of winds are known as air currents. They primarily result from variations in the temperature or atmospheric pressure.
The horizontal and vertical currents are present at the mesoscale, whereas horizontal currents predominate at the synoptic scale.
A region's short-term climate can be dramatically impacted by changes in wind currents. As they move moisture from one place to another, prevailing winds can result in a milder climate with heavy rain.
As a result, the impacted area may see higher precipitation and a more temperate environment.
Therefore, prevailing winds can cause a milder climate with heavy rain can impact the short-term climate in a region.
Learn more about wind current, here:
https://brainly.com/question/31051853
#SPJ5
Ice packs are used to make things cold or to add cold to an injury. Some people use insulated cups to keep things like coffee warm. How are these cups different from an ice pack? How might the molecules inside an ice pack be different from the liquid inside of an insulated cup?
wow isn't this interesting, I never would've thought to find u on here
The lowest allowable energy state of an atom is called its .
what is carbogen and it's uses
PLEASE HELP ME!!!
THE CHEM QUESTION IS...
Calculate the amounts of heat required for 25.0 g of water to change from 10°C to 30°C
Answer:
1045
Answer: 1045 J of energy was released on cooling the down the water from 20 °C to 10 °C.
Answer:
..............=2100
what is the chem formula for chromium (V) chloride?
Scientists changed the genes of a tomato plant in order to produce a protein which is a natural pesticide. Why would this be classified as a positive mutation?
Answer:
The plant would be insect-resistant and improve its chances of success.
Explanation:
Carl makes the table below to determine the number of atoms of each element in the chemical formula 4Ca(ClO3)2.
A table with 3 columns and 2 rows. The first column labeled element has entries calcium, chlorine, oxygen. The second column labeled calculation has entries 1 times 4 , 1 times 2, 3 times 2. The third column labeled total atoms has entries 4, 2, 6.
What mistake did Carl make?
Answer:
calcium chloride oxide
Answer:
He did not multiply the chlorine and oxygen atoms by the coefficient 4
Explanation:
I just took the quiz
What is the concentration of hplus ions at a ph=11
Answer: 10^-11
Explanation:
to find the concentration of H+ ions given the ph, we use the formula 10^(-pH).
so 10^-11
Carbon monoxide (CO) burns readily in oxygen (O2), forming
carbon Dioxide (CO2). Which of the follow equations is shows
this reaction and follows the law of conservation of mass?
Answer:
see attachment......
Brian is making a cake for his friend's birthday. He combines the ingredients for the cake and then pours the batter into two pans and bakes them for 45 minutes in the oven. While the pans are in the oven, he combines butter, sugar, and milk and mixes them together to make the icing. What type of changes created the cake and the icing?
A. Both the icing and the cake are formed by physical changes.
B. Both the icing and the cake are formed by chemical changes.
C. The icing is formed by a chemical change and the cake is formed by a physical change.
D. The cake is formed by a chemical change and the icing is formed by a physical change.
Answer:
it’s D.The cake is formed by a chemical change and the icing is formed by a physical change
Explanation:
It’s because when the cake was baking there was nothing physical about it so it was a chemical change the icing is formed by a physical change because all you did was mix three ingredients together
The type of changes that created the cake and the icing is;
Option D; The cake is formed by a chemical change and the icing is formed by a physical change.
This is about understanding type of changes in chemistry.
Physical change is defined as a change that affects the form of a compound or element but it doesn't affect its' chemical composition.Meanwhile, chemical change is defined as a change that affects the composition of a compound and a new substance is formed.Now, for brian's cake he has combined raw ingredients into two pans and bakes the cake. For the cake to be baked, it means the ingredients mixed have changed from liquid to solid and also a new substance has been formed. Thus, we can say that the cake was formed from chemical change.Meanwhile, the icing was formed by physical change because it did not undergo any chemical process and no new substance was formed as only butter, sugar and milk were mixed together.Read more at; https://brainly.com/question/19046658
Which of the following best defines a basic solution?
Which electron notation is incorrect?
1s 2s 2p 3s 3p 10
1s 2s 2p 3s 3p3
1s2 282 2p 3s 3p6
Ice floats due to its?
Answer: it floats because it’s less dense than water
Explanation: since it’s less dense it floats
What is the temperature of lukewarm water? Select the better estimate.
80°C
80°F
Answer:
80°F
Explanation:
Lukewarm means moderately warm. 80°C (176°F) water is extremely hot and could burn someone. 80°F (26 2/3°C) is moderately warm.
What is Constituent Element?
Answer:
hope it helps...
Explanation:
a constituent element, material, etc.; component. a person who authorizes another to act in his or her behalf, as a voter in a district represented by an elected official. Grammar. an element considered as part of a construction. Compare immediate constituent, ultimate constituent.
If this helped please comment...
Populations in the deep-sea vent ecosystem can get energy storage molecules without sunlight. Do you agree or disagree with this claim? Explain your answer.
Answer:
Agree
Explanation:
The deep-sea vent ecosystem gets energy storage molecules without sunlight. Life in the vent ecosystem relies on alternate energy through the use of hydrogen sulfide present in the water emanating from the vent.
The producers that form the basis of the food chain are bacteria that use the hydrogen sulfide to create energy-rich molecule in a process known as chemosynthesis.
The equation of the chemosynthesis is as below:
[tex]CO_2 + 4H_2S + O_2 --> CH_20 + 4S + 3H_2O[/tex]
Which of the following is true with respect to energy in a closed system?
A.
Energy can be destroyed, but cannot be created.
.
Energy can be created, but cannot be destroyed.
B.
OOOO
C. The system's kinetic energy must equal its potential energy.
D.
The total amount of energy in the system always stays the same.
Answer:
D. The total amount of energy in the system always stays the same
Explanation:
In the closed system, the total amount of energy in the system always stays the same.
What is closed system?Closed system is a arrangement in which exchange of energy or any material is restricted.
If any reaction is carried out in a closed system then energy of the system may convert from internal energy to potential or from potential to kinetic energy. But the total energy of the closed system is always remain same as before and after the reaction.
Hence option (D) is correct.
To know more about closed system, visit the below link:
https://brainly.com/question/1523500
Un móvil se mueve con movimiento acelerado. En los segundo 2 y 3 los espacios recorridos son 90 y 120 m, Calcula la velocidad inicial y su aceleración
Answer:
La velocidad inicial es 55 [tex]\frac{m}{s}[/tex]y su aceleración es -10 [tex]\frac{m}{s^{2} }[/tex]
Explanation:
Un movimiento es rectilíneo uniformemente variado, cuando la trayectoria del móvil es una línea recta y su velocidad varia la misma cantidad en cada unidad de tiempo . Dicho de otra manera, este movimiento se caracteriza por una trayectoria que es una línea recta y la velocidad cambia su módulo de manera uniforme: aumenta o disminuye en la misma cantidad por cada unidad de tiempo. Y la aceleración es constante y no nula (diferente de cero).
En este caso la posición del objeto esta dada por la expresión:
[tex]x=x0+v0*t+\frac{1}{2} *a*t^{2}[/tex]
donde x es la posición del cuerpo en un instante dado, x0 la posición en el instante inicial, v0 la velocidad inicial y a la aceleración.
En este caso, por un lado podes considerar:
x= 90 mx0= 0 mv0= ?t= 2a= ?Reemplazando obtenes:
[tex]90=v0*2+\frac{1}{2} *a*2^{2}[/tex]
[tex]90=v0*2+\frac{1}{2} *a*4[/tex]
[tex]90=v0*2+2*a[/tex]
Y por otro lado tenes:
x= 120 mx0= 0v0= ?t= 3a= ?Reemplazando obtenes:
[tex]120=v0*3+\frac{1}{2} *a*3^{2}[/tex]
[tex]120=v0*3+\frac{1}{2} *a*9[/tex]
[tex]120=v0*3+\frac{9}{2} *a[/tex]
Por lo que tenes el siguiente sistema de ecuaciones:
[tex]\left \{ {{2*v0+2*a=90} \atop {3*v0+\frac{9}{2} *a=120}} \right.[/tex]
Resolviendo por el método de sustitución, que consiste en aislar en una ecuación una de las dos incógnitas para sustituirla en la otra ecuación, obtenes:
Despejando v0 de la primera ecuación:
[tex]v0= \frac{90-2*a}{2}[/tex]
Reemplazando en la segunda ecuación:
[tex]120=\frac{90-2*a}{2} *3+\frac{9}{2} *a[/tex]
Resolviendo:
[tex]120=(90-2*a)*\frac{3}{2} +\frac{9}{2} *a[/tex]
[tex]120=135-3*a +\frac{9}{2} *a[/tex]
[tex]120-135=-3*a +\frac{9}{2} *a[/tex]
[tex]-15=\frac{3}{2} *a[/tex]
[tex]\frac{-15}{\frac{3}{2} } =a[/tex]
-10=a
Reemplazando el valor de a en la expresión despejada anteriormente obtenes:
[tex]v0= \frac{90-2*(-10)}{2}[/tex]
Resolviendo:
[tex]v0= \frac{90+20}{2}[/tex]
[tex]v0= \frac{110}{2}[/tex]
v0=55
La velocidad inicial es 55 [tex]\frac{m}{s}[/tex]y su aceleración es -10 [tex]\frac{m}{s^{2} }[/tex]
A student is attempting to identify an unknown liquid. She places 10 mL of the liquid in a test tube and begins heating it over a burner. She checks and records the temp every minute until it begins to boil. What is the independent variable?
Answer:
The time of heating
Explanation:
Let us analyse the experiment closely; the temperature of the liquid increases as the time of heating increases. This implies that the temperature of the liquid is dependent on the time of heating of the liquid. The longer the time of heating, the greater the increase in temperature until the boiling temperature is eventually attained.
Hence, the temperature of the liquid is the dependent variable, the time of heating is the independent variable when the heating rate is held constant.
How many Joules of heat are needed to melt 3.0 g of ice?
Answer:A substance must absorb heat energy so that it can melt or boil. The temperature of the substance does not change during melting, boiling or freezing - even though energy is still being transferred
Explanation:imm not sure
How can the gravitational potential energy of an object be changed?
Answer:
Gravitational potential energy may be converted to other forms of energy, such as kinetic energy. If we release the mass, gravitational force will do an amount of work equal to mgh on it, thereby increasing its kinetic energy by that same amount (by the work-energy theorem).
Explanation:
heyyyyyyy......................
Answer:
helllllooooooo hi how is life
Answer:
hiiii
Explanation:
Heyy, I am a 14 year old girl
I need someones help
Answer:
y or z one of those two i think its z but im so sorry if im wrong if not z then try y also I learned this last year.
When their is a new moon the sun and moon are on the same side of the earth this leads to a combination of gravitational forces causing usually high tides called
Neap tides
Low tides
Supreme tides
Spring tides
Answer:
Low Tides
Explanation:
Took the test
100%
Which formula represents a tetrahedral molecule?
LiBr
CO2
H₂
SIF4
um this is kinda weird I am take a guest SIF4
The formula that represents a tetrahedral molecule is SiF₄. The correct option is the fourth option - SIF4
From the question,
We are to determine which of the given formulae represents a tetrahedral molecule
In order to determine the molecule that represents a tetrahedral molecule, we will determine which of the molecules has a tetrahedral molecular geometry.
A tetrahedral molecular geometry has a central atom located at the center with four substituents that located at the corners of a tetrahedron
Among the given options, the molecule that has four substituents is SiF₄. Si is the central atom and the F atoms are the substituents.
Hence, the formula that represents a tetrahedral molecule is SiF₄. The correct option is the fourth option - SIF4
Learn more here: https://brainly.com/question/2108211
The #2 discovery was:
a
heliocentrism
0
E=MCP
c
heredity
general relativity
d
Answer:
bug vfyjovcduvcu Harris's
Which explains how to balance the equation ZnSO4 + Li2CO -> ZnCO3 + Li2SO4 ?
A. One reactant and one product needs the coefficient 2.
B. The products both need a 3 coefficient.
C. The reactants both need a 2 coefficient.
D. Atoms in the equation are already balanced.
Explanation:
Atoms in the equation are already in balance.
Answer:
it is d, got it right on EDG
Explanation:
1+1 = ?
plz say plzplapL
What does the chemical formula show?
a) The number of elements in each molecule
b) The number of atoms in each molecule
c) How heavy the molecule is.
d) The elements in the molecule and the number of atoms of each one .
Answer:
A
Explanation:
You can eliminate C because you need to consult a periodic table to determine the mass (not the weight).
There are other answers you could use. The wording is awfully sloppy. D is an example of that. The elements part is true, the atoms part is not really true in all cases. For example NaCl is table salt and both the elements are ions, not atoms. Na is plus ion and Cl is minus one. B is wrong for the same reason.
I think in the end I would choose A. I think this is a very sly question. It is not really testing chemistry. It is testing how well you know your definitions.