3.2 N = 3.2 kg•m/s²
and
(1000 kg/m³) (9.80 m/s²) = 9800 kg/(m² s²)
Then
(3.2 N) / ((1000 kg/m³) (9.80 m/s²)) = (3.2 kg•m/s²) / (9800 kg/(m² s²))
… = 3.2/9800 m³
… = 0.00032653… m³
and converting to scientific notation gives
… = 3.2653… × 10⁻⁴ m³
1. A student lifts a box of books that weighs 200 N. The box is lifted 2.5 m. How much work
does the student do on the box?
Answer:
The student does a work of 500 Newton meter on the box.
Explanation:
what is a benefit of fossil fuel consumption?
Answer:
increased greenhouse gases
Explanation:
I think this is the right answer...
It's almost always difficult to select healthy foods at a fast-food restaurant. O True O False
Answer:
yesExplanation:
because its most likely to have chucks than heathy foodWhich of the following is the best example of work being done on an object? *
-holding a 50kg weight
-lifting a bag of groceries from the floor
-holding down a compressed spring
-pushing a boulder that will not move
Answer:
lifting a bag of groceries.
work is force by distance, if there is no movement there is no work done
which lever is human arm
Answer:
The human arm is a class 3 lever
Explanation:
Answer:
A bent arm is a Class 3 lever. The pivot is at the elbow and the forearm acts as the lever arm. The biceps muscle provides the effort (force) and bends the forearm against the weight of the forearm and any weight that the hand might be holding.
Explanation:
Which applications, either for diagnostic purposes or for therapeutic purposes, involve the use of X-rays? Check all that apply.
Answer:
1, 3, 7, 8
Source:
Trust me bro
Pilings are driven into the ground at a building site by dropping a 2250 kg object onto them. What change in gravitational potential energy does the object undergo if it is released from rest 16.0 m above the ground and ends up 1.30 m above the ground ? Change in gravitational potential energy:
Answer: 324.135 kJ
Explanation:
Given
Mass of dropping is [tex]m=2250\ kg[/tex]
The initial height of dropping is [tex]h_1=16\ m[/tex]
The final height of dropping [tex]h_2=1.3\ m[/tex]
Gravitational potential energy is the function of height i.e.
[tex]\Rightarrow \text{G.E.}=mgh[/tex]
Change in Gravitational Energy is
[tex]\Rightarrow \Delta \text{G.E.}=mg(h_1-h_2)=2250\times 9.8\times (16-1.3)\\\\\Rightarrow \Delta \text{G.E.}=3,24,135\ J\approx 324.135\ kJ[/tex]
A centrifuge used in DNA extraction spins at a maximum rate of 7000rpm producing a "g-force" on the sample that is 6000 times the force of gravity. If the centrifuge takes 10 seconds to come to rest from the maximum spin rate: a) What is the angular acceleration of the centrifuge? b)what is the angular displacement of the centrifuge during this time
Answer:
A) a = 73.304 rad/s²
B) Δθ = 3665.2 rad
Explanation:
A) From Newton's first equation of motion, we can say that;
a = (ω - ω_o)/t. We are given that the centrifuge spins at a maximum rate of 7000rpm.
Let's convert to rad/s = 7000 × 2π/60 = 733.04 rad/s
Thus change in angular velocity = (ω - ω_o) = 733.04 - 0 = 733.04 rad/s
We are given; t = 10 s
Thus;
a = 733.04/10
a = 73.304 rad/s²
B) From Newton's third equation of motion, we can say that;
ω² = ω_o² + 2aΔθ
Where Δθ is angular displacement
Making Δθ the subject;
Δθ = (ω² - ω_o²)/2a
At this point, ω = 0 rad/s while ω_o = 733.04 rad/s
Thus;
Δθ = (0² - 733.04²)/(2 × 73.304)
Δθ = -537347.6416/146.608
Δθ = - 3665.2 rad
We will take the absolute value.
Thus, Δθ = 3665.2 rad
An ant walks 15 m east, then 40 m north, and finally 20 m west. What is the total displacement from the starting point
Answer: 40.311 m
Explanation:
Given
Ant walks 15 m east
then 40 m North and finally 20 m west
from the figure, ant is 40 m North and 5 m west
Using Pythagoras, we can write
[tex]\Rightarrow d=\sqrt{40^2+5^2}\\\Rightarrow d=\sqrt{1625}=40.311\ m[/tex]
A block of size 100cmX50cm applies a force of 100N on the ground. Calculate the pressure
exerted by the block on the ground.
(2 Points)
Answer:
200 N/m²
Explanation:
Pressure = Force / Area
Force =100N
Area = 100cm x 50 cm= 5000cm² =0.5m²
Hence Pressure = 100N / 0.5m²
Pressure = 200N/m²
When the C4 key on a piano keyboard is pressed, a string inside the piano is struck by a hammer and begins vibrating back and forth at approximately 260 cycles per second.
a. What is the frequency in Hertz of the sound wave?
b. What is the wavelength of the wave?
Answer:
Frequency = 260 Hz and wavelength = 1.31 m
Explanation:
Given that,
A hammer begins vibrating back and forth at approximately 260 cycles per second.
(a) The frequency of an object is the number of vibrations per unit time. The frequency of the sound wave is 260 Hz.
(b) The speed of sound in air is 343 m/s. So,
[tex]v=f\lambda\\\\\lambda=\dfrac{v}{f}\\\\\lambda=\dfrac{343}{260}\\\\\lambda=1.31\ m[/tex]
Hence, this is the required solution.
The water level at the beach changes on a regular basis. What is the primary force that causes these changes in water levels?
Explanation:
The water level at the beach changes on regular basis because of high and low tides in the sea. The high tide and low tide in the sea is because of moons gravitational force on Earth. The tide are low or high depends upon the differences in how much the moon's gravity pulls on different parts of Earth. Places where pull is less experience low tide whereas places where pull is more experience high tide.
Plzzz help!! A stationary speed gun emits a
microwave beam at 2.10x1010 Hz. It
reflects off a car and returns 1030 Hz
higher. What is the speed of the car?
(Unit = m/s)
Answer:
The speed of the car is 14.7m/second or 15 m/second approximately.
Explanation:
A microwave beam at [tex]2.10\times10^1^0Hz[/tex] is generated by a stationary speed gun. It bounces off a car and returns at a higher frequency of 1030 Hz. The car's observed frequency would be the product of adding the two frequencies. That is to say,
F =[tex]2.1\times10^1^0+1030[/tex] =[tex]2.100000103\times10^1^0Hz[/tex]
Using doppler effect formula
[tex]F=\frac{C}{C-V}\times f[/tex]
Where
F = observed frequency
f = source frequency
C = speed of light = [tex]3\times10^8[/tex]
V = speed of the car
Putting the values in the formula -
[tex]2.100000103\times10^1^0=\frac{3\times10^8}{3\times10^8-V}\times2.1\times 10^1^0[/tex]
[tex]\frac{2.100000103\times10^1^0}{2.1\times10^1^0}[/tex] [tex]=\frac{3\times10^8}{3\times10^8-V}[/tex]
[tex]1.000000049=\frac{3\times10^8}{3\times10^8-V}[/tex]
by cross multiplication ,
300000014.7 - 1.000000049V = [tex]3\times10^8[/tex]
Collect the like terms
1.000000049V = 14.71429
Make V the subject of formula
V = [tex]\frac{14.71429}{1.000000049}[/tex]
V = 14.7 m/s
Therefore , the speed of the car is 15m/second approximately.
Why are p waves unable to reach the shadow zone
Explanation:
The Shadow zone is the area of the earth
from angular distances of 104 to 140 degrees from a given earthquake that does not receive any direct P waves
5. What is the velocity of a 0.5 kg ball that has a momentum of 3.00 kg m/s?
Answer:
6 m/s
Explanation:
p=mv
p=3 kg.m/s
m=0.5 kg
rearrange and substitute to find v:
(3)=(0.5)v
v=3/0.5
v=6 m/s
A 12 N [E] force is applied to a toy train with a mass of 2.7 kg. The toy train is attached by a light string to a wagon with a mass of 1.8 kg which is attached to a second wagon with a mass of 1.0 kg. If the train is pulled on a surface with a coefficient of kinetic friction of 0.05, determine the tension in the string between the first and the second wagon. (6T, 3C) Include free body diagrams for the three masses involved in the acceleration. (3 Comm.)
See the attached diagram for reference and free body diagrams. The acceleration a of each body will be the same since each connecting string is in tension.
By Newton's second law, we have
• net force on the train:
- - horizontal
[tex]\sum F = F - F_{k,T} - T_1 = m_Ta[/tex]
(where F = 12 N)
- - vertical
[tex]\sum F = N_T - m_Tg = 0[/tex]
• net force on wagon 1:
- - horizontal
[tex]\sum F = T_1 - T_2 - F_{k,1} = m_1a[/tex]
- - vertical
[tex]\sum F = N_1 - m_1g = 0[/tex]
• net force on wagon 2:
- - horizontal
[tex]\sum F = T_2 - F_{k,2} = m_2a[/tex]
- - vertical
[tex]\sum F = N_2 - m_2g = 0[/tex]
We want to determine T₂, the tension in the string connecting the two wagons.
For each body, the corresponding normal force has magnitude
N = mg
where m is the respective mass, and the kinetic friction has magnitude
Friction = 0.05 N = 0.05mg
So if µ = 0.05, then the frictional force on each body is
[tex]F_{k,T} = 0.05 (2.7\,\mathrm{ kg}) g = 1.323\,\mathrm N[/tex]
[tex]F_{k,1} = 0.05 (1.8\,\mathrm{ kg}) g = 0.882\,\mathrm N[/tex]
[tex]F_{k,2} = 0.05 (1.0\,\mathrm{ kg}) g = 0.49\,\mathrm N[/tex]
which leaves us with the system of equations,
[1] … 12 N - 1.323 N - T₁ = (2.7 kg) a
[2] … T₁ - T₂ - 0.882 N = (1.8 kg) a
[3] … T₂ - 0.49 N = (1.0 kg) a
Adding [1] and [2] eliminates T₁ :
(12 N - 1.323 N - T₁) + (T₁ - T₂ - 0.882 N) = (2.7 kg) a + (1.8 kg) a
[4] … 9.795 N - T₂ = (4.5 kg) a
Divide through both sides of [3] by 1.0 kg to solve for a :
a = (T₂ - 0.49 N) / (1.0 kg)
Substitute this into [4] and solve for T₂ :
9.795 N - T₂ = (4.5 kg) (T₂ - 0.49 N) / (1.0 kg)
(9.795 N - T₂) (1.0 kg) = (4.5 kg) (T₂ - 0.49 N)
9.795 N - T₂ = 4.5 T₂ - 2.205 N
12 N = 5.5 T₂
T₂ = (12 N) / 5.5 ≈ 2.1818 N ≈ 2.2 N
a microwave with a frequency of 5.0 x 10 2 hertz has a period of
Hello,
QUESTION)✔ We have: T = 1/f; with T in s, and f in Hz
T = 1/5,0 x 10² Hz T = 2,0 x 10⁻³ sThe period of the microwave is therefore 2 ms.
Answer:
2.0x10^-11
Explanation:
T=1/f
T=1/5.0x10^10
T= 2.0x10^-11
1. The energy an object has while it is moving is called kinetic energy, or the energy of
A)traction
B)friction
C)magnetism
D)motion
Answer:
D
Explanation:
I hope this helps :)
Let me know if you want a full explanation
The energy an object has while it is moving is called kinetic energy, or the energy of motion. Thus, the correct option for this question is D.
What do you mean by Kinetic energy?Kinetic energy may be defined as a type of energy that an object possesses due to its motion. It is defined as the work that is required in order to accelerate a body of a given mass from rest to its stated velocity. It is also known as the energy that is possessed by an object by the virtue of its motion.
Kinetic energy is the energy of motion, observable as the movement of an object, particle, or set of particles. Any object in motion is using kinetic energy: a person walking, a thrown baseball, a crumb falling from a table, and a charged particle in an electric field are all examples of kinetic energy at work.
Therefore, the energy an object has while it is moving is called kinetic energy, or the energy of motion. Thus, the correct option for this question is D.
To learn more about Kinetic energy, refer to the link:
https://brainly.com/question/25959744
#SPJ2
what is this simple machines name
Answer:
bottle opener and door knob
Explanation:
Answer:
bottle opener
door handle
Use words to describe the relationship between the acceleration of an object and the net force acting on the object
Which describes Einstein’s second postulate about the special theory of relativity? The speed of light in a vacuum is constant, and nothing is faster than the speed of light. The speed of light in a vacuum is constant, and some things are faster than the speed of light. The speed of light in a vacuum fluctuates, but nothing is faster than the speed of light. The speed of light in a vacuum fluctuates, and some things are faster than the speed of light.
Answer:A
Explanation:
Answer: A)The speed of light in a vacuum is constant, and nothing is faster than the speed of light.
Explanation:
Answered Correctly on Edg.
You ride your bike 5 miles east to school, then 2 miles east to Wawa, return to school, then ride 2 miles west to the library to work on your homework. What is your displacement?
Answer:
3 miles
Explanation:
5 + 2 - 2 - 2 = 3 miles
Compared to the amount of carbon atoms on the earth, the amount of radioactive carbon atoms is infinitesimal in this sentence, what is the best synonym for infinitesimal
Answer:
See the answer below
Explanation:
The literal meaning for infinitesimal is for something to be small.
Other meanings include, but not limited to minute, insignificant, tiny, microscopic, minuscule.
Thus, the statement can be reconstructed by saying:
Compared to the amount of carbon atoms on the earth, the amount of radioactive carbon atoms is small.
A net force of 125 N is applied to a certain object. As a result, the object accelerates with an acceleration of 24 m/s2. The mass of the object is
Answer:
5.2 kg
Explanation:
mass Is force divided by the acceleration125÷4 5.2083333333A potato is which part of the plant?
root
stem
leaf
flower
3 ways objects can be grouped are
Answer:
Transparent = lets light pass through without significant interference
Translucent = lets light pass through with significant interference
Opaque = Doesn't let light pass, instead absorbs it
Neptune and Uranus are called the "ice giants" due to the presence of ice on their surface. Which is a reasonable explanation for why there aren't any ice giants in the group of terrestrial planets? A. They have rocky surfaces. B. They do not have rings. C. They are too close to the sun.
Answer:
C. They are too close to the sun.
Explanation:
Due to their relative location the gas giant such as neptune and Uranus are mostly cold and icy planets as they are located deep into the solar system and have large distance firm the sun.As compared to those of the earth and other rocky planets. Due to their distance they consist of primitive atmosphere and have slow rotation and movement.Select the correct answer from each drop-down menu.
Photosynthesis is a process in which plants prepare food using carbon dioxide, chlorophyll, and water in the presence of sunlight.
During photosynthesis,(blank)
energy is transformed into(blank)
1.Chemical,electrical,kinetic, Solar ?
2.Chemical, Electrical, Kinetic, Solar
Answer:
During photosynthesis solar energy is converted into chemical energy
Explanation:
During photosynthesis solar energy is converted into chemical energy in the form of energy rich bond of ATP molecule.
ATP (Adenosine triphosphate) and ADP (Adenosine diphosphate) molecules are termed currency of energy. ADP molecule is converted into ATP molecules, whenever energy is available in certain exothermic reactions of metabolism.
ATP molecules are store- house of energy. ATP molecule is broken down into ADP molecule in presence of enzyme ATPase, releasing energy whenever energy is required.
The synthesis of ATP molecules, utilizing solar energy during photosynthesis, is termed photo-phosphorylation.
These ATP molecules produced during light reaction of photosynthesis are utilized in dark reaction of photosynthesis (Calvin cycle).
ATP molecules synthesized during photo-phosphorylation may also be used in other metabolic reactions.
Photo-phosphorylation is of 2 types, i.e. Cyclic and Non-cyclic photo-phosphorylation.
Chlorophyll molecules entrap solar energy . There are 2 types of photo-systems in chlorophyll. These are photo-system -I and photo-system-II .
The electrons of chlorophyll molecule of photo-system I get excited which pass through series of electron carriers in electron transport system arranged in the order of decreasing energy level.
During the passage of electrons from carriers of higher energy level to the carriers of lower energy level, the energy is lost which is utilized for converting ADP molecule into ATP molecule.
Photo-system I is concerned with light reaction of photosynthesis only, constituting cyclic photo-phosphorylation.
The electron transport during Photo-system II results in the synthesis of NADPH2 in presence of enzyme NADP reductase. NADPH2 is used in reduction reaction of Calvin cycle.
Both Photo-systems participate in non-cyclic photo-phosphorylation that results in the synthesis of NADPH2 in addition to the synthesis of ATP molecules.
Time running out plzz hurry!!!!!!
Answer:
I THINK ITS B but I'm not suresorry
What is an abyssal fan
Answer:
Abyssal fans, also known as deep-sea fans, underwater deltas, and submarine fans, are underwater geological structures associated with large-scale sediment deposition and formed by turbidity currents
Explanation:
They are underwater deltas and submarine fans, they are associated with large scale sediment, and formed by turbidity currents.