How does an object gain potential energy
A) by melting
B) by gaining speed
C) by cooling to a lower temperature
D) by being raised above the ground

Answers

Answer 1

Answer:

d

Explanation:

Answer 2

Answer:

D

Explanation:

Gravitaional potential energy is energy that is stored by moving an object to a greater height above the ground.

im not sure if its right, but i tried :)


Related Questions

In boiling water, water molecules move apart and escape in the form of water vapor. The process is called_

Answers

Answer:

Evaporation

Explanation:

Evaporation occurs when a liquid changes to a gas. During evaporation, molecules gain enough thermal energy to escape from the liquid surface into the air as water vapor. Water-vapor molecules spread out, breaking completely free of each other, and then disperse or spread out among the other gas molecules in the air.

Hope this helps stay safe

love anyla..

Answer:

evarporation that is the answer i think because molecules of liqid are sperated thats why when in boiling water The molecules move apart and escape in vapour even i don't think it is the right answer

While a dog runs forward, its
owner pulls back with a 22.4 N
force at a 115º direction, doing
-42.3 J of work. How far did the
dog move?
(Unit = m)
HELP ME

Answers

Answer:

d = 4.47 [m]

Explanation:

To solve this problem we must make a free body diagram, where we can see the direction of the force acting with the appropriate angles. In the attached image we can see the free body diagram mentioned.

So in the image, we can see an angle of 65° with respect to the horizontal, therefore we can calculate the horizontal component of the force.

Fx = 22.4*cos (65)

Fx = - 9.46 [N] (it's negative because the force is pointing in the negative direction).

We can obtain the same result using 115° as the angle.

Fx = 22.4*cos (115)

Fx = 9.46 [N]

Now we know that work is defined as the product of the force by the distance, therefore we have.

Note: Always the work must be calculated with the force parallel

to the movement

W = F*d

Where:

W = work = 42.3 [J] (units of joules)

F = force parallel to the movement = 9.46 [N]

d = distance [m]

d = W/F

d = 42.3/9.46

d = 4.47 [m]

Answer:

Explanation:

the person on top of me is right it’s 4.47

GIVING BRAINLIEST TO THE RIGHT ANSWER examine the information for the two samples described in the chart. How are zinc and sodium alike?

A. They have the same hardness at room temperature.

B. They are both dolids at room temperature.

C. They have the same color.

D. They have the same boiling point.

Answers

They’re both solids at room temperature; everything else was different for every other answers, but in each box it says “Stare at room temperature: solid” so, they’re both solids at room temperature
Well they both have the same mass of 9g. And they are both solids at room temp. So probably B

You leave Chicago, Illinois at 8am and fly to Portland, Oregon. Your flight takes 2.5 hours. What time do you arrive in Portland?

Answers

Answer:

10:30am ........................

Answer:

maybe around 10:30 I would say

A tablecloth can be pulled out from underneath a fully set table without breaking plates or glassware. The reason is that the objects follow Newton's:

Answers

Answer:

newtons law of force

newtons law of force explains that something may or can or canot move depending on the objexts mass.


Car 1 of mass m1 is waiting at a traffic light.
Car 1 is struck from behind by Car 2 of mass m2.
The two cars stick together after the collision.
Car 2 was traveling at v2i = 30.0 m/s before the collision.

What is the initial kinetic energy, in [J], of car 1, if m1= 2500kg?

Answers

Answer: KE= 1/2 m v^2

KE= 1/2 2500 (0)^2

KE= 0

Explanation: since initial velocity is 0, the KE is 0.

The initial kinetic energy, in [J], of car 1 is 0.

KE= 1/2 m v^2

KE= 1/2 2500 (0)^2

KE= 0

What is kinetic energy?

Kinetic energy is a form of energy that an object or a particle has by means of reason of its movement. If paintings, which transfer strength, are carried out on an object via making use of an internet pressure, the object hastens and thereby gains kinetic energy.

What's the initial and very last kinetic strength?

The kinetic strength of an object depends on its velocity. To trade its pace, one must exert pressure on it. It turns out there's a connection between the pressure one applies to an object and the resulting change in its kinetic electricity: KE(very last) - KE(initial) = (force) (distance)

Learn more about kinetic energy here: https://brainly.com/question/25959744

#SPJ2

what is a Harmful mutation

Answers

By the same token, any random change in a gene's DNA is likely to result in a protein that does not function normally or may not function at all. Such mutations are likely to be harmful. Harmful mutations may cause genetic disorders or cancer. ... Cancer genes can be inherited

give any five difference between of solar system and constellation​

Answers

Answer:

constellation is just a name for a set of stars that are perceived, from an earth viewpoint, to make a form in tge night sky…. the Plough, the Great Bear, for example. A galaxy is a formation of stars that are revolving around a centre, our own solar system lies in the outer edge of the galaxy known as the Milky Way.

Explanation:

If the magnification of the image is NEGATIVE, the image is ( choose two .25
* answers)
virtual
real
inverted
reduced

Answers

Answer:

C. Inverted

Explanation:

When a negative magnification is obtained, it means that the image is inverted. When an object is placed far away from a converging lens than the focal length, the image is formed on the opposite side of the lens. In this case, a screen is introduced at image position for viewing. The image is focused up-side down. It is real and inverted.

PLEAASSEEEE HELLLPPP !

Answers

Answer: It moves in the direction of Fb at a constant rate of speed, because the same amount of force is being added the whole time.

Explanation:

Explain how to identify a starting position on a line.

Answers

Answer: You can easily find out the beginning point of the line by using dot representation. When it comes to position vector, it expresses the exact position of certain object from the starting point of the coordinate system. The vector is a straight line that has a certain end which is fixed to its body.

brainliest please :)

Answer:

We can easily find out the beginning point of the line by using dot representation. When it comes to the position vector, it expresses the exact position of a certain object from the starting point of the coordinate system. The vector is a straight line that has a certain end that is fixed to its body.

How much does a 200 kg car weigh?

Answers

Answer:

42,000 lbs

Explanation:

100 kg is 210 lbs.

200 x 210 lbs =

42,000 lbs

The weight of the car is product of its mass and acceleration due to gravity of earth. Hence, the weight of the 200 kg car is 1960 N.

What is acceleration due to gravity ?

The gravitational force of an object is the force by which attracts other objects into its center of mass. Earth attracts every objects into its center and that is why we are all standing on the ground.

The weight we experience on earth is  due to this gravitational force and it decreases when we move far from earth. The acceleration due to gravity is the acceleration by which an object accelerates downwards due to earth's gravity  (g).

Weight of an object  = mass × g

g for earth = 9.8 m/s²

mass of the car = 200 Kg.

then, weight = 200 kg × 9.8 m/s² = 1960 N.

Therefore, the weight of the car is 1960 N.

Find more on gravitational force:

https://brainly.com/question/24783651

#SPJ6

6. Which Thanksgiving dish contains the most dietary fiber ? (Corn) (Mashed Potatoes) (Sweet Potatoes) (Pecan Pie)

Answers

Answer:

The correct option is;

Sweet Potatoes  

Explanation:

The dietary fiber in Corn = 2.7 g per 100 g

The dietary fiber in Mashed Potatoes = 1.3 g per 100 g

The dietary fiber in Sweet Potatoes = 3 g per 100 g

The dietary fiber in Pecan Pie = 2.1 g per 100 g

Therefore, the Thanksgiving dish that contains the most dietary fiber per 100 g is Sweet Potatoes

Caregivers should begin reading to children:
When they are babies.
When they can talk.
When they show an interest.
When they are two.
When they are preschoolers.

Answers

Answer:

When they are babies.  to get them familar with it

Explanation:

Pls choose brainliest.

Answer:

When they are babies

Explanation:

Because they could hear the words and laern them.

. A car going 50 m/s accelerates to pass a truck. Five seconds later the car is going 80m/s. Calculate the acceleration of the car.

Answers

6 mph/s


Calculating acceleration involves dividing velocity by time — or in terms of SI units, dividing the meter per second [m/s] by the second [s]. Dividing distance by time twice is the same as dividing distance by the square of time. Thus the SI unit of acceleration is the meter per second squared .

This is a lab for science can you help with punctuation errors? Also where it says figures I have pictures :) (I am in 7th grade btw so no hate)
Leaf lab
Purpose: Find out if the leaf area of a given tree is bigger on the North or the Southside. Learn more advanced statistical analysis.
Research: To find the area of an irregular shape it’s whole + part ½ which is whole plus part divided by 2. The shape of the leaf will be traced. They are affected by the Earth's tilt and the sun because we are in the North Hemisphere.

Figure 1 is an example of the Earth’s tilt and how the sun gives a certain amount of heat to different parts of the Earth.
The south gets more sun it’s because the leaves burn while the north leaves get less sun. The north leaves are thinner but bigger in area than the leaves that get a lot of suns. This makes them smaller or bigger because one side might get more sun which makes north leaves bigger.
Hypothesis: The leaves on the Northside are bigger.
Procedure:
1. Collect 35 leaves from the Northside and 25 leaves from the Southside.
2. A tree that is not in shade.
3. Press the leaves flat.
4. Trace the leaves onto graph paper using both sides of the page keeping North and South separate.
5.Count whole (w) and partial squares (p) and calculate the area of each leaf in squares 6. with the equation A= W+ ½ P.

Figure 2 is an example of the equation A= W+ ½ P. There are 4 whole´s and 8 parts so the area is 8 inches squared because 4+ ½ 8= 8.
7. Create a north and South leaf data table.
8. Discard leaves afterward.
9. Put the leaf area in order from smallest to greatest in each table.
10. Find the mean, median, mode of the 2 data sets as well as the entire range of 50 leaf data sets.
11.Create a histogram
Use the range to find the size of 7 bins. USe the nearest whole number
Sort leaves
Count leaves and creates a chart
12.Create histograms of individual data using Microsoft Excel or google docs
5. Results: The north's side leaves are bigger than the south side by a few a lot,
6. Conclusion: It was a warm sunny day and windy. The experimenter gathered 25 leaves from the North and South sides with all different sizes and colors. The hypothesis was supported based on the data collected. One reason why it was supported was that the North overall average was greater than the South. The Northside leaves are greater is that it is proven by facts. If someone compared a random south leave to a random north leaf, most times the North would be bigger because the probability of getting a big leaf is higher for North rather than South. The second piece of evidence from my data is that the South bin had more leaves in smaller bins while the North bin had an equal amount of leaves in the high and low bins. The third piece of evidence is that the Northside leaves had a bigger average than the South leaves. Also, the Southside had the smallest leaf while the Northside had the biggest leaf. The entire group also supported this.
7. Errors and ways to improve: Try to get different trees and instead of picking a few leaves in a certain area in the north and south, pick random ones. Also, gather more and different leaves. Different weather conditions could affect the leaves.
Figure 3, is the north bin where most of the leaves are bigger.
Figure 4, the south bin where most of the leaves are smaller.
Figure 5, the class north bin where some most leaves are small but some are big.
Figure 6, the class south bin where mostly all of the leaves are small.
Figure 7 is the tree used to pick leaves off.

Answers

Answer:

First of all you should give more then 5 points for this.And the errors are you should add a space between all of the steps and info of the lab. And read everything over again and where you take a breath at or if you stop add a coma or a period.

Is better to run or walk when it is raining?

Answers

Answer:

run

Explanation:

run - less wet

walking - more wet

Children are ready for more complex storybooks:
Around one.
Around two.
Around two and a half to three years old.
Around three.
Around four years old.

Answers

Answer:

4

Explanation:

Because that is when they're mind learns how to read

What does the xylem do?

A .stores the glucose
B captures the sunlight
C absorbs oxygen into the leaf
D carries water from the roots to the leaves

Answers

Answer:

D carries water from the roots to the leaves.

is the answer.

Explanation:

Xylem is the specialised tissue of vascular plants that transports water and nutrients from the plant–soil interface to stems and leaves, and provides mechanical support and storage.

Answer:

D carries water from the roots to the leaves

Explanation:

have a nice day

what allows for movement

Choose the correct answer:

-excretory
-immune/hymophatic
-integumentary
-muscular

Answers

Musuclar I think lol

1. A particular lever is 90.0% efficient. If 50.0 J of work are done on the lever, then how much work does the lever do on its load? 2.The mechanical advantage of a pulley system is 4.00. Using this pulley system, how much force do you need to exert to lift a 500.0 N box?

Answers

Answer:

Explanation:

Using the efficiency formula;

Efficiency = Work done by the machine (output)/work done on the machine (input) ×100%

Efficiency =w/50 ×100

90 = 100w/50

Cross multiply

90×50 = 100W

4500 = 100W

W = 4500/100

W = 45Joules

Hence the lever does 45Joules of work on its load

2) Mechanical Advantage= Load/Effort

Given

MA = 4

Load = 500N

4 = 500/Effort

Effort = 500/4

Effort =125N

Hence the effort required to lift the load is 125N

1. The work done by the lever on its load is 45 J

2. The force needed to exert to lift the load is 125 N.

1. Determination of the work done by the lever on the load.

Work Input = 50 J

Efficiency = 90%

Work Output =?

[tex]efficiency \: = \frac{work \: output}{work \: input} \times 100 \\ \\ 90\% = \frac{work \: output}{50} \\ \\ cross \: multiply \\ \\ work \: output \: = 90\% \: \times 50 \\ \\ work \: output = 0.9 \: \times 50[/tex]

Work Output = 45 J

Therefore, the work done by the lever on the load is 45 J

2. Determination of the force needed to lift the load

Mechanical advantage (MA) = 4

Load (L) = 500 N

Effort (E) = ?

[tex]mechanical \: advantage \: = \frac{load}{effot} \\ \\ 4 \: = \frac{500}{effort} \\ \\ cross \: multiply \\ \\ 4 \: \times effort \: = 500 \\ \\ divide \: both \: side \: by \: 4 \\ \\ effort \: = \frac{500}{4} \\ [/tex]

Effort = 125 N

Therefore, the force needed to lift the load is 125 N

Learn more: https://brainly.com/question/17070019

3. As the ice melts into liquid water, what happens to the kinetic energy of the particles in the sample?
4. How does the kinetic energy of the particles in the sample relate to the sample’s temperature?

Answers

Answer:

As ice melts into water, kinetic energy is being added to the particles. This causes them to be 'excited' and they break the bonds that hold them together as a solid, resulting in a change of state: solid -> liquid.

Explanation:

As the ice melts into liquid water, the kinetic energy of the particles in the sample increase. The temperature of the sample is directly proportional to the kinetic energy of the particle.

What is Kinetic energy?

The kinetic energy of an object is the energy which it possesses due to the motion of the object. Kinetic energy is defined as the work which is needed to accelerate a body of a given mass from the rest position to its stated velocity. The body of an object maintains the same amount of kinetic energy which it gained during its acceleration unless its speed changes.

The temperature is directly proportional to the kinetic energy of the object. As the temperature of the object increases the phase of the object changes from solid to liquid.

Learn more about Kinetic energy here:

https://brainly.com/question/26472013

#SPJ6

Come up with your own team sports game and make your own rules and regulation.​

Answers

SO my sports name would be called " Basvollball" It's where you have to hit in a volleyball into a basketball hoop, of course, the time is the same as football with increments of 5 minutes for junior high and 7 minutes for high school with halftime. Also, the ball can never touch the ground and if the ball ever hits the floor its the other's team ball. To decide which team gets the ball, a coin flip will decide it. For the point system, it depends on how far the ball is hit from so it's like basketball from 3 pointers to 2 points inside the line. If the team ever reaches 30 points without the other team scoring, the team who's winning will automatically win after the time runs out in that period or quarter. You can use every body part, as long as, the ball doesn't touch the floor, and you can only use your body to push someone, no pushing with hands or arms. You can play this sport indoors or outside whether the team has a field available. There's also a maximum of 14 players on the field, so 7 players on each team.


PLZZZ HELLPP MEE

Which of the choices below shows a model of the atom Neon (Ne)?
B.
D.
Ne
Ne Ne
OB
ОС
OD

Answers

Answer:

A is answer

Explanation:

this is helpful

Click to review the online content. Then answer the question(s) below, using complete sentences. Scroll down to view additional questions. Free Weights and Machines What are some things to consider when deciding to use free weights or machine weights?

Answers

Machine weights are safer when used correctly, but free weights can be dropped and cause injury. These are safety considerations to keep in mind whether using free weights or machine weights. But because they aren't big, complicated machinery, free weights are less expensive.

What are  free weights or machine weights?

Resistance machines and free weights are very different from one another in terms of how they work and the results they can create.

Machines are set in place and can only move in a few directions, whereas free weights can be moved in whatever direction the user selects. This is the main distinction between machines and free weights. Free weights require you to utilize more stabilizing muscles to control them, whereas resistance machines help you by stabilizing you while you move.

Learn more about  free weights here:

https://brainly.com/question/21991373

#SPJ2

Why are many adults and youth in the United states overweight?

Answers

Answer:

I'd imagine fast food is a lot more popular than most countries over there and easier to get hold of.

Explanation:

america

Answer:

There are different answers to that, like if you read a passage or something.

Explanation:

These days many people do not get exercise. A lot of jobs are now done indoors and do not require any physical activities. Technology is becoming more advanced and many people prefer using machines to do the heaving lifting.

There are a lot of fast-food restaurants and this is where a lot of people in the US choose to eat. The food is cheap and easy to pick up. This food is convenient for people on the go. The food is not healthy and it causes weight gain.

In the US, many young children find it cool to smoke. Smoking decreases the body's strength and it causes a decrease in physical health, causing people to gain weight.

Everyone has a phone these days, if not some kind of electronic device to chat with people or play games. Over time, playing on electronic devices replaces doing physical activities.

If a girl runs 51 m East in 17 seconds what is her velocity?

Answers

Answer:

Yea what he said I think

Explanation:

A driver speeds along a curved road and sees a fallen tree on the road. He applies the brakes but is unable to stop in time. When the car hits the tree, it slows down from 6 meters/second to 0 meters/second. What was the change in velocity during this time?

Answers

Answer:

It's -6 meters/seconds.

Explanation:

Answer:

-6

Explanation:

GIVING BRAINLY, FOLLOW AND STARS, HELP!
When a solid object absorbs infrared rays, what happens to the particles
in that object?​

Answers

Answer:

All objects emit and absorb infrared radiation. The hotter an object is the more energy it radiates per second. Infrared radiation can travel through a vacuum. When infrared radiation hits an object some of the energy is absorbed, making the objects temperature increase, and some is reflected.

Explanation:


What is the speed of a car that travels 400 m in 20
minutes?

Answers

Answer:

3.33 m/s

Explanation:

time = 20 minutes = 20 x 60 = 120 seconds

distance = 400m

speed = distance/time

           = 400/120

           = 40/12

           = 10/3

           = 3.33m/s

Other Questions
As astablished by the Articles of Confederation, the national government could...A. Regulate trade.B. Enforce laws.C. Conduct diplomacy.D. Raise a national army. In which of these cases is each stamp worth the most? 7 of the same stamp worth a total of $3.15 8 of the same stamp worth a total of $3.20 10 of the same stamp worth a total of $4.10 16 of the same stamp worth a total of $4.80 A piece of fabric costs $5.29 a yard. Which is an estimated cost of 16.3 yards of fabric? $21 $80 $165 $800 Mark this and returnPLEs Finding the slope of the line In 1760 America's population was 70%A. White/ EuropeanB. African-AmericanC. native AmericanD. Other:_____________ Please help :)Thx with this What does the phrase dashed off suggest that Mark did as it is used in the second sentence of this story? A. carelessly wrote B. punctuated C. ran away D. ambled what critical approach did the author use? explain why you think that is the approach In the most recent NBA Finals series, Lebron James took 175 shots and made 80.In his last NBA Finals series, Michael Jordan took 190 shots and made 85. Who had a better percentage? is multifunction a prefix Complete the fraction that is equivalent to . 36 Please help with this Spanish worksheet! I dont understand it, Ill reward Brainliest to whoever gets them right. Thank you! How many of each color ballon will be in each bouquestplz answer this What languages were spoken by the American Indian cultures of the Northeast? Iroquoian and Algonquian Muskogean and Algonquian Iroquoian and Caddoan Muskogean and Caddoan PLEASE HELP. I'LL GIVE BRAINLIEST TO CORRECT ANSWER. There are several ways to model a compound. One type of model is shown.4 C's are connected in a line by 3 black lines. The C on the left has 3 H's attached to it each by a black line. The next C has 1 H attached by a black line and 1 O attached by 2 black lines. The next C has 2 H's attached to it by 1 black line each. The last C has 2 H's attached to it by 1 black line each and 1 O attached by a single black line. That O has an H attached to it by 1 black line.What is the chemical formula for the molecule represented by the model?CHO C4H9O2C4H8OC3H8O2 Explain why mutations may or may not affect phenotype HELPPPPPPPPPPPPPPPPPPPPPPPPPPPPP What is 18% of 65? (I will give brainliest!) A 100-inch pipe is cut into two pieces. One piece is three times the length of the other. Find the length of the shorter piece. the process in which living cells break down glucose to create unusable cellular energy in the form of atp is called