Answer:
Gases as might be expected, increase in solubility with an increase in pressure. Henry's Law states that: The solubility of a gas in a liquid is directly proportional to the pressure of that gas above the surface of the solution. ... When the bottle is opened, the pressure above the solution decreases.
Answer:High pressure increases the solubility.
Explanation: i just took the quiz
Many gyms and health clubs have steam saunas, which are small steam-filled rooms. Traditionally, steam saunas have a container of heated rocks. A small ladle of water is poured on the rocks in order to make the steam. Use what you have learned so far about heat transfer to explain how hot rocks can be used to make steam.
Solution :
It is given that a now-a-days many of the health clubs and the gyms provides steam saunas with the help of heated rocks in a container. When water is poured in to these heated rocks, steam is being produce.
This is because the energy conversion takes place in this process. The hot rocks have high temperatures and possess heat energy in them. So when cold water is poured in to the rocks, the cold water absorbs the heat energy from the rocks and is converted in to hot vapor by converting heat energy in to vapor energy or steam energy by the process of vaporization.
Mendeleev found that the properties of the known elements followed a pattern that repeated every
a.7 elements.
b.5 elements.
c.14 elements.
d.10 elements.
Answer:
14 elements
I hope this is correct answer please follow me
Answer:
The answer will be A. 7 elements
Explanation:
I took a test and I got it right hope this helps<3 ^^
PLEASE HURRY IM TIMED I WILL GIVE BRAINYST (if correct)
What is typical of a grassland? (Select all that apply.)
many trees
grass
wide, open areas
lakes
Answer:grass and wide open areas
Explanation: grassland- large open area of country covered with grass, especially one used for grazing.
Answer:
i needed the answer to this one too
Explanation:
Only electrons in the __________ orbital can form chemical bonds.
Answer:
Electrons in sigma bonds remain localized between two atoms. Sigma bond results from the formation of a molecular orbital by the end to end overlap of atomic orbitals. Electrons in pi bonds can become delocalized between more than two atoms. Pi bonds result from the formation of molecular orbital by side to side overlap of atomic orbitals.
A closed flash contains 0.60 moles of xe, 0.50 moles of h2, and 0.40 moles ar. if the total pressure is 1.5 atm, what is the partial pressure of h2?
Answer:
0.50 atm
Explanation:
Step 1: Calculate the total number of gas moles
The total number of moles is equal to the sum of the number of moles of each gas.
n = nXe+ nH₂ + nAr
n = 0.60 mol + 0.50 mol + 0.40 mol = 1.5 mol
Step 2: Calculate the mole fraction of hydrogen
The moe fraction of hydrogen is the quotient between the number of moles of hydrogen and the total number of moles.
ΧH₂ = 0.50 mol / 1.5 mol = 0.33
Step 3: Calculate the partial pressure of hydrogen
Given the total pressure (P) is 1.5 atm, we can calculate the partial pressure of hydrogen using the following expression.
pH₂ = P × ΧH₂
pH₂ = 1.5 atm × 0.33 = 0.50 atm
2+4 help please i will fail 6th grade
Answer:
6
Explanation:
lol
sodium bicarbonate =sodium carbonate + water + carbon dioxide gas
Answer: NaHCO3 = Na2CO3 + H2O + CO2
Read about reverse osmosis and multistage flash distillation .Then identify at least three advantages and three
disadvantages for each process
Answer:
Meaning, Advantages & Disadvantages of - Osmosis, Multiflash Distillatiob
Explanation:
Osmosis is movement of solvent (like water) through semi permeable membrane (like living cell) into solution of higher solute concentration.Advantages - It assists equalising concentration of solute on two sides of membrane. Reverse Osmosis is used for efficient water softening, it is easy to maintain.
Disadvantages - It needs a lot of energy. A lot of pressure is required for deionisation. Water acidity level increases, as minerals get deionised.
Multistage flash distillation refers to desalination water distilling seawater, by flashing water portions in steams in various stages of concurrent heat exchangers.Advantages - Its Cost efficient , distillation uses waste heat. It has High gain output ratio. Quality of feedwater is less significant, compared to reverse osmosis.
Disadvantages - It has high operating cost in case of waste heat unavailability. High temperature imply high corrosion & scale formation.
How many moles of Oxygen atoms are contained in 45.9 mol CO2?
Answer:
Explanation:
10 moles of oxygen atoms.\ \textbf{b)} 91.8 moles of oxygen at
what is the percent composition of calcium fluoride
Answer:
78.07
Explanation:
them seperatly is
Calcium Ca 51.333%
Fluorine F 48.667%
Which best describes the total mass of substances before and after a
combustion reaction?
A. The mass is the same because atoms are not created or
destroyed.
B. The mass is greater after the reaction because the number of
atoms increases.
C. The mass is the same because the molecules do not change.
D. The mass is less after the reaction because gases are produced.
Answer:
B. The mass is greater after the reaction because the number of
atoms increases.
If the temperature of a gas in the can increases then....
The pressure would increase
OR
The pressure would decrease
Answer:
the pressure would increase with the temperature if it gets to hot the can will explode
As the temperature in a sample of gas molecules increases, which of the other properties of the gas molecules could be caused to increase or decrease?
If an alkene is protonated and the solvent is an alcohol rather than water, a reaction takes place that is very similar to acid-catalyzed hydration, but in the second step of the mechanism the alcohol functions as a nucleophile instead of water. Draw a plausible mechanism for the following process: What is the most likely sequence of steps in the mechanism
Answer:
Please find the structure of the mechanism in the attached file.
Explanation:
can someone answer this
According to the kinetic molecular theory which substances are made of particles ?
Answer:
The kinetic molecular theory of matter states that: Matter is made up of particles that are constantly moving. All particles have energy, but the energy varies depending on the temperature the sample of matter is in. This in turn determines whether the substance exists in the solid, liquid, or gaseous state.
Explanation:
Kinetic molecular theory explains the properties of solids, liquids and gases. As per this theory, matter is made of particles.
What is kinetic theory?
Kinetic molecular theory explains the properties of different states of matter. According to this theory matter is made up of particles. But the theory is mostly applies for gases.
According to kinetic theory of gases, gaseous substances consists of tiny spherical particles which are located apart from each other and hence no intermolecular force acts between them. They are in random motion and gains kinetic energy.
The kinetic energy of particles are temperature dependant and it increase as temperature rises. The collision between the particles and the particle and wall of the container in which they are will be elastic collision.
These concepts are applicable only for ideal gases. An less applicable for other states of matter.
To find more kinetic theory, refer here:
https://brainly.com/question/15357425
#SPJ6
what is solar system
Answer:
Explanation:
The Solar System is the gravitationally bound system of the Sun and the objects that orbit it, either directly or indirectly. Of the objects that orbit the Sun directly, the largest are the eight planets, with the remainder being smaller objects, the dwarf planets and small Solar System bodies
can you plz help me plz
it process information and sends instruction? A. brain B. kidney C. heart D. lungs
Answer:
A. brain
Explanation:
every instruction to us is sent by brain
Answer:
A. Brain
Explanation:
It assembles the messages in a way that has meaning for us, and can store that information in our memory.
What is [H⁺] in a 0.330 M solution of acrylic acid, CH₂CHCOOH (Ka = 3.16 × 10⁻⁵)?
Answer:
[H⁺] = 3.23x10⁻³ M
Explanation:
For a weak monoprotic acid, such as acrylic acid, we can calculate [H⁺] using the following formula if the solution concentration is significantly higher than the Ka:
[H⁺] = √(C * Ka)Where C is the weak acid concentration.
We input the data:
[H⁺] = [tex]\sqrt{0.330 M * 3.16x10^{-5}}[/tex]And solve for [H⁺]:
[H⁺] = 3.23x10⁻³ MBe sure to answer all parts. Determine the electron-group arrangement, molecular shape, and ideal bond angle for the following molecule: SO3 Electron-group arrangement: V-shaped (bent) trigonal planar trigonal pyramidal seesaw Molecular shape: bent square pyramidal trigonal planar trigonal pyramidal Ideal bond angle: degrees
Answer:
trigonal planar
Explanation:
The molecule SO3 is of the type AX3. The molecule is symmetrical and non polar.
There are three regions of electron density in the molecule. This corresponds to a trigonal planar geometry. This means that the three oxygen atoms are arranged at the corners of a triangle. The bond angle is 120 degrees.
A certain reaction has an activation energy of 51.02 kJ/mol. At what Kelvin temperature will the reaction proceed 4.50 times faster than it did at 365 K
Answer:
[tex]T_2=400.73K[/tex]
Explanation:
From the question we are told that:
Activation energy [tex]E_a= 51.02 kJ/mol.=>51.02*10^3J/mol[/tex]
Reaction Ratio [tex]\triangle K=4.50[/tex]
Initial Temperature [tex]T_1=365K[/tex]
Generally the equation for Final Temperature [tex]T_2[/tex] is mathematically given by
[tex]log \triangle K=\frac{E_a}{2.303R}*(\frac{T_2-T_1}{T_1T_2})[/tex]
Where
[tex]R=Gas constant[/tex]
[tex]R =8.3143[/tex]
Therefore
[tex]log 4.50=\frac{51.2*10^3}{2.303*8.31432}*(\frac{T_2-365}{365*T_2})[/tex]
[tex]log 4.50=7.328*\frac{T_2-365}{T_2}[/tex]
[tex]0.0892=\frac{T_2-365}{T_2}[/tex]
[tex]0.0892T_2=T_2-365[/tex]
[tex]365=T_2-0.0892T_2[/tex]
[tex]365=0.91T_2[/tex]
[tex]T_2=\frac{365}{0.91}[/tex]
[tex]T_2=400.73K[/tex]
A helium-filled balloon contains 0.16 mol He at 101 kPa and a temperature of 23°C. What is
the volume of the gas in the balloon?
V = 3.9 L
Explanation:
Given:
T = 23°C + 273 = 296K
n = 0.16 mol He
P = 101 kPa = 0.997 atm
R = universal gas constant = 0.08205 L-atm/mol-K
V = ?
Using the ideal gas law,
PV = nRT
V = nRT/P
= (0.16 mil He)(0.08205 L-atm/mol-K)(296K)/(0.997 atm)
= 3.9 L
What type of radiation can be used to kill bacteria in food?
Answer:
all I can think of is gamma rays
What is the resulting element of this alpha decay. Also, explain how you got your answer.
241Am95 → ZXA + 4He2
Give me an example of a Beta decay equation and explain the process of the formation of the new element.
Answer:
will this help you ?
Explanation:
Many nuclei are radioactive; that is, they decompose by emitting particles and in doing so, become a different nucleus. In our studies up to this point, atoms of one element were unable to change into different elements. That is because in all other types of changes discussed, only the electrons were changing. In these changes, the nucleus, which contains the protons that dictate which element an atom is, is changing. All nuclei with 84 or more protons are radioactive, and elements with less than 84 protons have both stable and unstable isotopes. All of these elements can go through nuclear changes and turn into different elements.
Carbon-14 has a half-life of 5,730 years. It is used in "carbon dating" to determine the age of once living organisms. How much of a 144 gram sample of C-14 will remain after 17,190 years have past.
Answer:
18 grams
Explanation:
Because 17,190 yrs divided by the amount of years it takes for a half-life to occur is 3. So 3 half life’s happen, so you divide 144/2 once, equaling 72. You divide 72/2 again (another half-life) and you get 36. You then calculate the third half life by dividing 36/2 which equals 18 grams.
Answer:
5730
Explanation:
Answer to Founders Education:)
The electron configuration of an atom tells us how many electrons are in each orbital.
a. True
b. False
Answer:
a. True
Explanation:
Take for example the electron configuration of nitrogen:
N ⇒ 1s² 2s² 2p³
The numbers in superscript tell us the number of electrons in each orbital. This is true for all elements. In this case we can see that nitrogen has 2 electrons in the 1s orbital, 2 other in the 2s orbital, as well as 3 electrons in the 2p orbitals.
1. Enter the complete ionic equation when Li3PO4 and AgNO3 are mixed.2. Enter the net ionic equation when K2SO4 and Na2CO3 are mixed.3. Enter the complete ionic equation when K2SO4 and Na2CO3 are mixed.4. Enter the complete ionic equation when Fe(NO3)2 and Na2CO3 are mixed.5. Enter the net ionic equation when Fe(NO3)2 and Na2CO3 are mixed.6. Enter the complete ionic equation when BaCl2 and KOH are mixed.7. Enter the net ionic equation when BaCl2 and KOH are mixed.
Solution :
1. Ionic equation when [tex]$Li_3PO_4$[/tex] and [tex]$AgNO_3$[/tex] are mixed.
[tex]$3 Li^+ (aq) + PO_4^{3-} (aq) + 3Ag^+ (aq) + 3NO_3^-(aq) \rightarrow Ag_3PO_4(s)+3Li^+(aq)+3NO_3^-(aq)$[/tex]
Net ionic : [tex]$PO_4^{3-}(aq)+3 ag^+(aq) \rightarrow Ag_3PO_4(s) $[/tex]
2. [tex]$K_2SO_4$[/tex] and [tex]$Na_2CO_3$[/tex]
No reaction
3. [tex]$K_2SO_4$[/tex] and [tex]$Na_2CO_3$[/tex]
No reaction
4. [tex]$Fe(NO_3)_2 \text{ and}\ \ Na_2CO_3$[/tex]
[tex]$Fe^{2+}(aq)+2NO_3^-(aq)+2Na^+(aq)+CO_3^{2-}(aq) \rightarrow FeCO_3(s) + 2Na^+(aq) + 2NO_3^-(aq)[/tex]5. [tex]$Fe(NO_3)_2 \text{ and}\ \ Na_2CO_3$[/tex]
[tex]$Fe^{2+}(aq)+2NO_3^-(aq)+2Na^+(aq)+CO_3^{2-}(aq) \rightarrow FeCO_3(s) + 2Na^+(aq) + 2NO_3^-(aq)[/tex]6. [tex]$BaCl_2 \text{ and}\ \ KOH$[/tex]
[tex]$Ba^{+2}(aq)+2Cl^-(aq)+2K^+(aq)+2OH^-(aq) \rightarrow Ba(OH)_2(s) + 2K^+(aq) + 2Cl^-(aq)$[/tex]
7. [tex]$BaCl_2 \text{ and}\ \ KOH$[/tex]
[tex]$Ba^{+2}(aq)+2Cl^-(aq)+2K^+(aq)+2OH^-(aq) \rightarrow Ba(OH)_2(s) + 2K^+(aq) + 2Cl^-(aq)$[/tex]
identify the four quantum number for 3p5
Answer:
Four quantum numbers of unpaired electron of chlorine are n=3,l=1,m=0,s=+1/2.
Explanation:
What is the mass, in grams, of a piece of aluminum if its temperature changes from 25.0 ºC to 31.5 ºC when it absorbs 42.2 joules of energy? The specific heat for aluminum is 0.89J/gºC
Answer:
m = 7.29 grams
Explanation:
Given that,
Initial temperature, T₁ = 25ºC
Final temperature, T₂ = 31.5ºC
The specific heat of the metal is 0.89 J/gºC.
We know that the heat released due to the change in temperature is given by :
[tex]Q=mc\Delta T\\\\m=\dfrac{Q}{c\Delta T}\\\\m=\dfrac{42.2 }{0.89\times (31.5-25)}\\\\m=7.29\ g[/tex]
So, the mass of the piece is equal to 7.29 grams.