how does the average kinetic energy (avg ke) of an ideal gas vary as the molar mass of the gas increases?

Answer:

Sublimation, the dry ice changes to a gas, solid to gas is sublimation

When a salt such as PbCl2 is added to water, it dissolves because of the attraction between the positively charged Pb2+ ions and the negatively charged Cl− ions and the polar nature of water molecules.

Water molecules' oxygen atoms have a partially negative charge, while their hydrogen atoms have a partially positive charge.

When a solid salt like PbCl2 dissolves in water, water molecules surround each ion and dissolve it by breaking apart the ionic bond that holds the ions together.

When a solid dissolves in water, the concentration of ions in the solution increases. When PbCl2 dissolves in water, it creates one Pb2+ ion and two Cl- ions.

Adding water to PbCl2 increases the concentration of ions.The solubility of PbCl2 in water is directly proportional to the amount of chloride ions present.

In the presence of water, the equilibrium in the following reaction shifts to the right: PbCl2(s) → Pb2+(aq) + 2Cl−(aq)

This results in an increase in the number of ions in the solution and a corresponding decrease in the solubility of the salt, indicating that the chloride ion concentration increases as more water is added.

to know more about molecules refer here:

https://brainly.com/question/19922822#

#SPJ11

In the certain molecule, the central atom has the one lone pair and five bonds. The electron pair geometry is the square pyramidal and molecular structure is square pyramidal.

The square pyramidal has  the 5 bonds and the 1 lone pair. The 1 lone pair will be sits on the bottom of the molecule and that will causes the repulsion of the rest of  bonds. This will result in that the bond angles are the all slightly lower than the 90°.

The molecule with the five bonding pairs and the one lone pair is designated as the AX5E and it has the total of the six electron pairs. The electron pair geometry is the square pyramidal and molecular geometry is square pyramidal.

To learn more about geometry here

https://brainly.com/question/28189901

#SPJ4

The best method to separate a 1:1 mixture of aniline and ethylbenzene is through

distillation

.

Distillation is a process that involves heating the mixture to its boiling point, which causes the components to vaporize. As the vapors cool and condense, the liquid components will separate into their pure forms.

Since the boiling points of aniline and

ethylbenzene

differ significantly Aniline boiling point: 184°C; Ethylbenzene boiling point: 135°C.

The process of distillation involves heating the mixture in a distillation apparatus.

As the temperature increases, the vaporized components of the mixture will travel up a condenser and then be collected separately in two separate flasks.

During this process,

aniline

will be the first component to vaporize and travel up the condenser, while ethylbenzene will follow suit.

The two components will condense in their respective flasks and can then be collected and isolated.

In conclusion,

Distillation is the best method to separate a 1:1 mixture of aniline and ethylbenzene due to the fact that it utilizes their differences in boiling points to allow for the collection of the two components in their pure forms.

This is achieved by heating the mixture in a distillation apparatus and condensing the vapors in two separate flasks.

to know more about

distillation

refer here:

https://brainly.com/question/29037176#

#SPJ11

In summary, the mass percent of the sulfuric acid solution is 29.89%, the molality is 4.35 mol/kg, and the normality is 7.5 N.

To calculate the mass percent, molality, and normality of the 3.75 M sulfuric acid solution, follow these steps:
First let's calculate the mass of 1 liter of the solution:
We know, Density = mass/volume. So, mass = density × volume = 1.230 g/mL × 1000 mL = 1230 g
Now, calculating the mass of sulfuric acid (H2SO4) in 1 liter of the solution:
Molarity = moles of solute/volume of solution. So moles of solute = molarity × volume = 3.75 mol/L × 1 L = 3.75 mol
The molar mass of H2SO4 = (2 × 1.01) + (32.07) + (4 × 16) = 98.08 g/mol
Mass of H2SO4 = moles × molar mass = 3.75 mol × 98.08 g/mol = 367.8 g
To Calculate the mass percent of H2SO4:
Mass percent = (mass of solute / mass of solution) × 100
= (367.8 g / 1230 g) × 100 = 29.89%
To Calculate the molality of H2SO4:
Molality = moles of solute / mass of solvent (in kg)
Mass of solvent = mass of solution - mass of solute = 1230 g - 367.8 g = 862.2 g = 0.8622 kg
Molality = 3.75 mol / 0.8622 kg = 4.35 mol/kg
To Calculate the normality of H2SO4:
Normality = molarity × number of equivalents per mole
For H2SO4, there are 2 acidic hydrogens (protons) that can be released, so the number of equivalents per mole = 2.
Normality = 3.75 M × 2 = 7.5 N
In summary, the mass percent of the sulfuric acid solution is 29.89%, the molality is 4.35 mol/kg, and the normality is 7.5 N.

Learn more about mass percent, molarity and normality here, https://brainly.com/question/20349446

#SPJ11

The layers of the sun can be seen in the image attached.

The sun is composed of several layers, including:

Core: The innermost layer of the sun where nuclear fusion takes place. The temperature in the core is about 15 million degrees Celsius.

Radiative Zone: This layer is between the core and the convection zone. Energy produced in the core is transported through the radiative zone by photons.

Convection Zone: The outermost layer of the sun's interior where hot gas rises and cooler gas sinks. The energy produced in the core is carried to the surface by convection.

Photosphere: The visible surface of the sun where most of the sun's light is emitted. The temperature of the photosphere is around 5,500 degrees Celsius.

Chromosphere: A thin layer above the photosphere that emits a reddish glow during solar eclipses. The temperature of the chromosphere ranges from 4,000 to 10,000 degrees Celsius.

Corona: The outermost layer of the sun's atmosphere, extending millions of kilometers into space. The temperature of the corona is extremely high, around 1 to 3 million degrees Celsius.

Learn more about the sun:https://brainly.com/question/17376727

#SPJ1

While calculating the mass for chloride, a student comes up with a negative number. The most likely the reason for this error, assuming they did the math correctly is that the student has used the wrong sign for the charge of the chloride ion.

Chloride is an anion, and its charge is negative, but the student may have used a positive sign while calculating it. For instance, the student may have assumed that the chloride ion has a charge of +1 instead of -1, which would have led to the negative mass value.

Besides that, there is no other reason for a negative mass value. The mass of a compound, such as chloride, is always positive and should not be negative at any time. Thus, it can be assumed that the student has made a mistake while assigning the sign for the charge of the chloride ion. However, it is essential to double-check the calculations to ensure that there are no other errors or mistakes in the calculations. Additionally, it is recommended to consult a teacher or a tutor for guidance in case of any confusion while calculating the mass of an ion or a compound.

Learn more about anion at:

https://brainly.com/question/14929591

#SPJ11

Answer: The molar mass of magnesium chloride, MgCl2 is 95.21 g/mole.

How to calculate the molar mass of magnesium chloride, MgCl2?

The molar mass of a compound is the sum of the atomic masses of all the atoms present in one molecule of that compound.

The atomic mass of magnesium is 24.31 g/mole and the atomic mass of chlorine is 35.45 g/mole (17.77 g/mole for each Cl atom).

So, the molar mass of magnesium chloride, MgCl2 is:

Molar mass of MgCl2= (Molar mass of Mg) + 2 x (Molar mass of Cl)

= 24.31 + 2 x 35.45= 95.21 g/mole

Therefore, the molar mass of magnesium chloride, MgCl2 is 95.21 g/mole.

Learn more about molar mass here:

https://brainly.com/question/22997914#




#SPJ11

The reaction scheme is as follows:

Styrene (monomer) + Azobisisobutyronitrile (initiator) →  Radical polymers + Nitrile groups

Radical polymers then undergo combination or disproportionation as the possible modes of termination:

Combination:

Radical polymers + Radical polymers → Polystyrene (end product)

Disproportionation:

Radical polymers → Polystyrene + Styrene (monomer)

Polymerization of styrene is a chain-growth process initiated by thermolysis of azobisisobutyronitrile, which is a free radical initiator.

During the reaction, styrene molecules act as the monomers, while azobisisobutyronitrile molecules provide the initiating radicals, which combine to form a growing polymer chain.

These polymer chains can either terminate through combination, where two growing chains react with each other and form a new polymer chain, or through disproportionation,

where a growing polymer chain reacts with a styrene molecule to form a new polymer chain and a styrene molecule.

Thermolysis, which is the decomposition of molecules due to high temperature, is the mechanism of initiation of the polymerization of styrene.

This process breaks down the azobisisobutyronitrile molecules into the two radicals, which act as the initiators for the polymerization.

The two possible modes of termination, combination and disproportionation, then occur, resulting in the formation of polystyrene as the end product.

to know more about styrene refer here:

https://brainly.com/question/14546335#

#SPJ11

The correct answer is C. Silicon and Germanium are semiconductor elements. A semiconductor is a material that has properties of both an insulator and a conductor.

It can be used to create transistors, which are components that can be used to amplify or switch electronic signals.

Semiconductor elements are made up of different atoms that have at least four electrons in their outer shell. The four electrons are what gives them their semi-conductive properties.

Silicon and Germanium are two of the most common semiconductor elements.

Silicon is the most widely used semiconductor element. It has four electrons in its outer shell and is found in nature as a component of sand and quartz.

Silicon has the ability to easily form bonds with other atoms, which makes it a great choice for semiconductor devices.

Germanium is also a commonly used semiconductor element. It has four electrons in its outer shell and is a component of coal and many other minerals.

Germanium has a slightly higher electron mobility than Silicon, which makes it better suited for certain types of transistors.

In conclusion, Silicon and Germanium are semiconductor elements. They have four electrons in their outer shell and are used in transistors and other semiconductor devices.

Silicon is the most widely used semiconductor element due to its ability to form strong bonds with other atoms, while Germanium is better suited for certain types of transistors due to its higher electron mobility.

to know more about semiconductor refer here:

https://brainly.com/question/15184439#

#SPJ11

The correct reduction half-reaction for the given chemical equation (Zn(s) + CuSO₄(aq) → Cu(s) + ZnSO₄(aq)) is:

Cu²⁺(aq) + 2e⁻ → Cu(s)

1. First, let's identify the species that are changing their oxidation states in the reaction. It's zinc (Zn) and copper (Cu).

2. Zn is undergoing oxidation, as it is losing electrons and forming Zn²⁺ in ZnSO₄. Cu²⁺ from CuSO₄ is gaining electrons and forming elemental copper (Cu).

3. Now, we'll focus on the copper half-reaction to find the reduction half-reaction. Reduction is the process of gaining electrons, so we need to identify the half-reaction where Cu²⁺ gains electrons.

4. The given reduction half-reaction is Cu²⁺(aq) + 2e⁻ → Cu(s), which represents the process where Cu²⁺ ions from the copper sulfate solution gain two electrons to form solid copper.

5. To confirm this, we can check the other options provided:

a. Ag⁺(aq) + Cl⁻(aq) → AgCl(s) - This is a precipitation reaction

b. Fe²⁺(aq) → Fe³⁺(aq) + e⁻ - This is an oxidation half-reaction involving iron

c. HF(aq) + OH⁻(aq) → H₂O(l) + F⁻(aq) - This is an acid-base neutralization reaction

So, the correct reduction half-reaction for the given chemical equation is Cu²⁺(aq) + 2e⁻ → Cu(s).

to know more about half-reaction refer here:

https://brainly.com/question/13109589#

#SPJ11

The number of moles of sodium hydroxide present in the sample, is 0.00839 moles.

To calculate the number of moles of sodium hydroxide present in a 26.80 ml sample of a 0.315 m solution, use the following equation:

Moles = concentration (M) x volume (L)

Moles = 0.315 M x 0.02680 L

Moles = 0.00839 moles of sodium hydroxide present in a 26.80 ml sample of a 0.315 m solution.

To explain this in further detail, moles are a unit of measurement for an amount of substance and are typically expressed as mol. A mole is equal to 6.02 x 10^23 atoms or molecules, and is represented by the letter 'n' or 'N'.

The concentration of a solution is a measure of the amount of solute dissolved in a given volume of solvent and is expressed in molarity (M). Volume is expressed in litres (L).

By multiplying the concentration of a solution (0.315 M) by the volume of the sample (0.02680 L).

Sodium hydroxide, also known as lye, is a highly reactive and caustic inorganic compound. It is commonly used in soap and detergent production, as well as in the paper and textile industries.

It is also used in the production of a variety of other chemicals, including pharmaceuticals and food additives.

To know more about  Sodium hydroxide refer here:

https://brainly.com/question/29327783#

#SPJ11

2.27 M is the molarity of a solution made by dissolving 1.25moles of Na[tex]_2[/tex]CrO[tex]_4[/tex] in enough water to form exactly 0.550 l of solution.

A chemical solution's concentration is measured in molarity (M). It refers to the solute's moles per litre of solution. Keep in mind that this is not the same as solvent in litres (a common error). Although molarity is a useful unit, it does have one significant drawback. Temperature impacts a solution's volume, therefore when the temperature varies, it does not stay constant. Typically, you convert grammes of solute to moles and then divide this quantity by litres of solution because you cannot measure solute in moles physically.

Molarity = moles of solute/volume of solution in liters

Molarity = 1.25 moles/0.550 L = 2.27 M

To know more about molarity, here:

https://brainly.com/question/31545539

#SPJ12

The Arrhenius equation shows that the activation energy is directly proportional to the logarithm of the rate constant and inversely proportional to the temperature.

The Arrhenius equation is

[tex]k = A e^{-\frac{E_a}{RT}}[/tex]

where:

k is the rate constant is the pre-exponential factor

Ea is the activation energy

R is the gas constant

T is the temperature in Kelvin

According to the Arrhenius equation, as temperature increases, the rate constant, and thus the reaction rate increases exponentially. This is because as temperature increases, the average kinetic energy of the molecules in the reaction mixture increases, leading to a greater proportion of molecules with sufficient energy to react.

The activation energy of a reaction, Ea, is the minimum energy required for reactant molecules to react and form products. The Arrhenius equation shows that the activation energy is inversely proportional to the rate constant, and thus the reaction rate. As temperature increases, the proportion of reactant molecules with sufficient energy to overcome the activation energy barrier increases, reducing the activation energy and increasing the reaction rate.

Overall, the Arrhenius equation demonstrates that increasing temperature increases the reaction rate and decreases the activation energy.

To learn more about activation energy refer - brainly.com/question/14776335

#SPJ11

Explanation:

If we look at the definition of the second electron affinity:

The second electron affinity is the enthalpy change when one mole of gaseous 2⁻ ions is formed from one mole of gaseous 1⁻ ions

The equations of the second electron affinity for oxygen and sulfur:

O⁻ (g) + e⁻ → O²⁻ (g)

S⁻ (g) + e⁻ → S²⁻ (g)

This process is endothermic as we are trying to combine an electron with a negative ion, and so we must overcome the repulsion. Applying energy will overcome it.

The second electron affinity is the energy change that occurs when an atom in the gaseous state gains an additional electron.

For both oxygen and sulfur, the second electron affinity values are unfavorable, meaning that the energy change that occurs is endothermic. This means that energy is being absorbed by the atom, and the atom is becoming more stable.
To understand why the second electron affinity values for oxygen and sulfur are unfavorable, it is important to look at the electron configurations of these atoms. Oxygen's electron configuration is 2s22p4, meaning it has 8 electrons in its outermost shell. Sulfur has an electron configuration of 2s22p63s2, meaning it has 16 electrons in its outer shell. Since both of these atoms have a full outer shell of electrons, they are not in need of an additional electron, and therefore do not have a strong tendency to gain one. As a result, it takes a lot of energy for the atom to gain an additional electron, meaning the second electron affinity value is unfavorable (endothermic).

In conclusion, the second electron affinity values for oxygen and sulfur are unfavorable (endothermic) because they already have full outer shells of electrons and do not have a strong tendency to gain an additional electron.

To know more about endothermic reaction  click on below link :

https://brainly.com/question/23184814

#SPJ11

The type of bond responsible for holding two water molecules together, creating the properties of water, is a polar covalent bond.

Explanation: The type of bond that is responsible for holding two water molecules together, creating the properties of water is hydrogen bond.What is a hydrogen bond?A hydrogen bond is a type of chemical bond that exists between two electrically polar molecules. Hydrogen bonds are much weaker than covalent or ionic bonds, but they do serve a significant purpose in both organic and inorganic chemistry. Example of a hydrogen bond, one example of a hydrogen bond is found in between two water molecules. Each water molecule is composed of two hydrogen atoms and one oxygen atom, and each hydrogen atom is bonded covalently to the oxygen. However, the shared electrons are not distributed evenly between the two atoms. Because oxygen is more electronegative than hydrogen, it pulls electrons away from the hydrogen atoms, resulting in a slight charge imbalance within the molecule. The oxygen atom in one water molecule is therefore attracted to the hydrogen atoms in another water molecule. This attraction produces a hydrogen bond between the two molecules, which helps to hold them together.

For more such questions on polar covalent bond

https://brainly.com/question/13560841

#SPJ11

The Ksp of lead (II) iodide is 7.1x10-9. If it is measured that the lead concentration in the solution is 0.0003 M, then what is the concentration of iodide in the solution is 1.5 x 10-5 M

Given, the Ksp of lead (II) iodide is 7.1x10-9.

The concentration of lead =

Ksp expression of lead (II) iodide is given as,

PbI2 ⇌ Pb2+ + 2I–Ksp = [Pb2+] [I-]2Here, [Pb2+] = 0.0003MIodide.

concentration:

Let’s consider x as the concentration of iodide.

The equilibrium expression of the dissolution of PbI2 is,

PbI2 ⇌ Pb2+ + 2I–Initial: 0 0

Change: -x +x + 2x

At equilibrium: (0-x) (0+ x) (2x)Ksp = [Pb2+] [I-]2= (0.0003) (2x)2= 7.1x10-9x = 1.5 x 10-5 M

The concentration of iodide in solution is 1.5 x 10-5 M.

An alternate method to solve the problem is using the quadratic equation. We can solve the equation as follows,      

Ksp = [Pb2+] [I-]2

= (0.0003) (2x)2

= 7.1x10-92x2

= 7.1x10-9/0.00032x2

= 79x = 1.5x10-5 M

Therefore, the iodide concentration in the solution is 1.5 x 10-5 M.

To know more about Lead concentration refer here:

https://brainly.com/question/30880405#

#SPJ11

The pH of a 0.20 M acetic acid solution is 2.72.

The pH of a 0.20 M acetic acid solution can be calculated using the Ka of acetic acid, CH3COOH, which is 1.8 x 10-5.

We will use the equation for the dissociation of acetic acid to calculate the pH of the solution.

CH3COOH(aq) + H2O(l) ⇌ H3O+(aq) + CH3COO-(aq)

The equilibrium constant expression for the dissociation of acetic acid is given by

Ka = [H3O+][CH3COO-] / [CH3COOH].

Since we know the value of Ka and the initial concentration of acetic acid, we can solve for

the concentration of H3O+.Ka = [H3O+][CH3COO-] / [CH3COOH]

1.8 x 10-5 = [H3O+]2 / 0.20[H3O+]2 = 3.6 x 10-6[H3O+] = 1.9 x 10-3 M

The pH of the solution can then be calculated as:

pH = -log[H3O+]pH = -log(1.9 x 10-3)

pH = 2.72

Therefore, the pH of a 0.20 M acetic acid solution is 2.72.

To know more about pH, refer here:

https://brainly.com/question/30255888#

#SPJ11

The radius of a single atom of a generic element x is 123 picometers (pm) and a crystal of x has a unit cell that is body-centered cubic. So, the volume of the unit cell is 11.5482 x 10⁻²⁴ cm³.

Given,

The radius of a single atom of a generic element x is 123 picometers (pm) and a crystal of x has a unit cell that is body-centered cubic.

Body-Centered Cubic (BCC):

In a Body-Centered Cubic unit cell, each corner of the cube has a corner atom, and there is an additional atom in the center of the cube. The atom that is centered on the unit cell is surrounded by eight neighboring atoms, each of which is located at a distance of

4R/√3,

where R is the radius of the atom.

The volume of the unit cell = (4 * radius of the atom)^3/3

For BCC, volume of the unit cell is

(4 * radius of the atom)^3/3

= (4 * 123 pm)^3/3

= 11.5482 x 10⁻²⁴ cm³

The volume of the unit cell is 11.5482 x 10⁻²⁴ cm³.

For more such questions on volume , Visit:

https://brainly.com/question/29493123

#SPJ11

Orange waves have a lower frequency and contain less energy than green waves.

What is Wave?

A wave is a disturbance or oscillation that travels through space and time, accompanied by the transfer of energy without the transfer of matter. Waves can take many different forms, including sound waves, light waves, water waves, and seismic waves. They can be described in terms of their frequency, wavelength, amplitude, and velocity, among other properties. Waves play a fundamental role in many areas of science and technology, including communication, medicine, and engineering.

The energy of a wave is directly proportional to its frequency, which means that higher frequency waves contain more energy than lower frequency waves. The frequency of a wave refers to the number of complete cycles or oscillations that the wave undergoes per second, and is measured in units of Hertz (Hz).

Learn more about Wave from the given link

https://brainly.com/question/26116832

#SPJ1

In the "Reactions" section of your Pre-lab notebook, you should have two reaction schemes involving the alkene. The correct answer is option d.

The Pre-lab notebook is a collection of worksheets and pre-lab assignments that students must finish before lab. This may include preparing solutions, making graphs, filling out data tables, or writing lab reports.A pre-lab notebook is a place where students may record and evaluate their work before and during a laboratory session. It is a document that is kept by the student and used to help them comprehend the material that is presented to them.

The Pre-lab notebook is divided into three sections: the Procedures section, the Data section, and the Reactions section. An alkene is a hydrocarbon that contains a carbon-carbon double bond. Alkenes are typically unsaturated and highly reactive. Alkenes are used in a variety of industries, including the production of plastics, synthetic rubbers, and fibers. Alkenes are also used as solvents in many applications.

They are known for their ability to react with a variety of other compounds. This will ensure you cover a range of possible reactions and provide a comprehensive understanding of the alkene's behavior in different situations.

To know more about alkene, refer here:

https://brainly.com/question/31033378#

#SPJ11

The atomic mass of Li is 6.94 amu.

Li has two natural isotopes: Li-6 (6.015 amu) and Li-7 (7.016 amu). The atomic mass of element Li can be calculated given the abundance of Li-7 is 92.5%. The correct answer is 6.94 amu.Atomic mass is defined as the mass of an atom of an element. It is the sum of the masses of the protons and neutrons present in the atomic nucleus. The atomic mass is usually given in atomic mass units (amu) and is measured using mass spectrometry. Atomic mass is also known as atomic weight.The atomic mass of Li can be calculated as follows:atomic mass of Li = (abundance of Li-6 × atomic mass of Li-6) + (abundance of Li-7 × atomic mass of Li-7)Given,Abundance of Li-6 = 100% - 92.5% = 7.5%Abundance of Li-7 = 92.5%Atomic mass of Li-6 = 6.015 amuAtomic mass of Li-7 = 7.016 amuSubstitute the values in the formula to obtain the atomic mass of Li.atomic mass of Li = (0.075 × 6.015) + (0.925 × 7.016)= 0.45113 + 6.4914= 6.94253≈ 6.94 amu Therefore, the atomic mass of Li is 6.94 amu. An atom is composed of electrons, protons, and neutrons. An atom with a specific number of protons in its nucleus is referred to as an element. A variety of isotopes with different masses can be produced by different atoms of the same element. Naturally occurring isotopes are referred to as natural isotopes.

Learn more about Atomic mass

brainly.com/question/5661976

#SPJ11

Answer:

c.no is a correct answer

The pH of a solution if 10 ml of a 1 M HCl solution is added to 10 ml of a 1 M NaOH solution can be calculated as follows:

First, let's find the number of moles of HCl and NaOH in the solution. Number of moles of HCl = Concentration of HCl x Volume of HClNumber of moles of HCl = 1 M x (10 ml/1000 ml)Number of moles of HCl = 0.01 molesNumber of moles of NaOH = Concentration of NaOH x Volume of NaOHNumber of moles of NaOH = 1 M x (10 ml/1000 ml)Number of moles of NaOH = 0.01 molesNext, let's find the net number of moles of H+ and OH- ions.Number of moles of H+ ions = Number of moles of NaOH - Number of moles of HCl.Number of moles of H+ ions = 0.01 - 0.01Number of moles of H+ ions = 0 molesNumber of moles of OH- ions = Number of moles of HCl - Number of moles of NaOHNumber of moles of OH- ions = 0.01 - 0.01Number of moles of OH- ions = 0 molesSince the net number of moles of H+ ions and OH- ions is zero, the solution is neutral. The pH of a neutral solution is 7. Therefore, the pH of the solution is 7.

To know more about pH  click on below link :

https://brainly.com/question/491373#

#SPJ11

The value of the constant, k, for this data is 51.5.

option D.

To determine the constant k, we can use the formula:

PV = k

where;

We can rearrange the formula to solve for k:

k = PV

Now, we can multiply the pressure and volume values for each data point to get the corresponding value of k:

For the first data point: k = 1.15 kg/cm² x 44.8 mL = 51.52

For the second data point: k = 1.24 kg/cm² x 41.5 mL = 51.40

For the third data point: k = 1.47 kg/cm² x 35.0 mL = 51.45

We can take the average of these values to get an overall value for k:

k = (51.52 + 51.40 + 51.45) / 3 = 51.46 ≈ 51.5

Learn more about constant here: https://brainly.com/question/27983400

#SPJ1

UV active compounds are those that fluoresce when exposed to a UV lamp. Upon exposure to UV light, these compounds absorb energy and promote an electron from the HOMO to the LUMO. Consider which wavelengths are included in the UV range. CH2=CH2, CH2=CH-CH=CH-CH=CH, CH2=CH-CH=CH-CH=CH-CH=CH, CH2=CH-CH2-

CH=CH, and CH, =CH-CH=CH are all examples of UV active compounds.


The UV active compounds in the given list are CH2=CH-CH=CH-CH=CH, CH2=CH-CH=CH-CH=CH-CH=CH, and CH2=CH-CH2-CH=CH. These compounds will **fluoresce** when exposed to a **UV lamp** and absorb energy to promote an electron from the HOMO to the LUMO.

To determine if a compound is UV active, consider the presence of **chromophores** within the molecule. Chromophores are functional groups that absorb UV light, typically containing conjugated double bonds or aromatic rings. In this case, the first three compounds have conjugated double bonds, making them UV active. The fourth compound, CH=CH-CH=CH, lacks sufficient conjugation to be UV active.

For more similar questions on topic dissociate

brainly.com/question/15321204

#SPJ11

The nonzero quantity is Heat Transfer.

Heat Transfer is the only quantity that must be nonzero for a constant pressure process at 300K and 1 atm. This is because Heat Transfer is the amount of energy that is required to maintain constant pressure.

All other quantities in this process, such as Work, Internal Energy, and Enthalpy, are zero for a constant pressure process at a given temperature and pressure.

Therefore, the quantity that is nonzero for this constant pressure process at 300k and 1 atm is Heat Transfer.

To know more about Heat Transfer, refer here:

https://brainly.com/question/13433948#

#SPJ11

To compare the 0.5 M sucrose solution and the 90.5 M glucose solution, we need to consider their concentrations, which are measured in moles per liter (M).

For the 0.5 M sucrose solution, we know that it contains 0.5 moles of sucrose per liter of solution. The molecular mass of sucrose is 342 g/mol, so we can calculate the mass of sucrose in one liter of solution as follows:

0.5 moles/L × 342 g/mol = 171 g/L

Therefore, the 0.5 M sucrose solution contains 171 g of sucrose per liter of solution.

For the 90.5 M glucose solution, we know that it contains 90.5 moles of glucose per liter of solution. The molecular mass of glucose is 180 g/mol, so we can calculate the mass of glucose in one liter of solution as follows:

90.5 moles/L × 180 g/mol = 16,290 g/L

Therefore, the 90.5 M glucose solution contains 16,290 g of glucose per liter of solution.

From these calculations, we can see that the 90.5 M glucose solution is much more concentrated than the 0.5 M sucrose solution. However, the two solutions cannot be directly compared in terms of their effects on biological systems or their properties, as the properties of a solution depend on many factors such as solubility, osmotic pressure, and chemical interactions with other molecules.

To know more about molecular mass here

https://brainly.com/question/3182776

#SPJ4

When animals consume food containing large polymeric molecules, such as proteins, carbohydrates, and nucleic acids, their digestive system breaks down these molecules into smaller components that can be absorbed and utilized by the body.

Mechanical digestion occurs in the mouth and stomach, where food is broken down into smaller pieces through chewing and mixing with digestive enzymes and acids. Chemical digestion occurs primarily in the small intestine, where enzymes and other compounds break down complex molecules into smaller components.

Proteins, for example, are broken down into their constituent amino acids by proteases, while carbohydrates are broken down into simple sugars like glucose and fructose by amylases. Nucleic acids are broken down into nucleotides by nucleases.

Once these molecules are broken down, they are absorbed into the bloodstream through the walls of the small intestine and transported to the liver, where they are further metabolized and distributed to other parts of the body as needed. The body then uses these molecules to build new proteins, carbohydrates, and nucleic acids or to generate energy through cellular respiration. Any excess molecules are typically stored for later use or eliminated from the body as waste.

To know more about molecules, here

brainly.com/question/4745152

#SPJ4

--The complete question is, What happens to large polymeric molecules in food once they are eaten by animals?--

Answer : When mixing 538 grams of a substance into 647 ml of water, the concentration of the resulting solution in g/L is 0.83.

The concentration of the resulting solution in g/L can be calculated by dividing the mass of the substance (538 g) by the total volume of the solution (647 ml). This gives us a result of 0.83 g/L.

To further explain this calculation, we must first understand the concepts of mass and volume. Mass is a measure of the amount of matter an object contains. Volume, on the other hand, is the amount of space occupied by a given object. When mixing 538 grams of a substance into 647 ml of water, we are creating a solution with a certain concentration of the substance.

To calculate the concentration of the resulting solution, we must divide the mass of the substance (538 g) by the total volume of the solution (647 ml). This gives us a result of 0.83 g/L.

Know more about mass here:

https://brainly.com/question/14014782

#SPJ11