The resistance of R1 and R2 in parallel is lower than their resistance in series.
When two resistors, R1 and R2, are in parallel, the equivalent resistance is calculated as
R = (R1 * R2) / (R1 + R2).
The resulting resistance is always lower than either of the individual resistors. In contrast, when R1 and R2 are in series, the equivalent resistance is calculated as R = R1 + R2. The resulting resistance is always higher than either of the individual resistors.
1. Resistance in Series: In a series circuit, the total resistance R(total) is the sum of the individual resistances (R1 and R2). Mathematically, it is given by:
R (total)= R1 + R2
2. Resistance in Parallel: In a parallel circuit, the total resistance R(total) is found using the reciprocal formula. Mathematically, it is given by:
1/R(total) = 1/R1 + 1/R2
Now, let's compare the two cases:
In a series circuit, the total resistance is simply the sum of the individual resistances, whereas in a parallel circuit, the total resistance is determined by the reciprocal formula. Generally, the total resistance in a parallel circuit is lower than that in a series circuit, due to the reciprocal relationship. This means that when R1 and R2 are connected in parallel, their combined resistance will be less than when they are connected in series.
For more such questions on resistance , Visit:
https://brainly.com/question/28135236
#SPJ11
help me please oml 2 one
Color: Both the bromine gas and steak have a brownish color.
What is bromine gas?Bromine gas is a reddish-brown, nonflammable, and highly toxic gas with a very strong, unpleasant odor. It is composed of two heavy, diatomic, halogen molecules, Br2, and is the only nonmetal element that exists as a liquid at room temperature. Bromine gas is denser than air and is soluble in water and organic solvents.
Texture: The bromine gas is a gas and therefore has no texture, while the steak is solid and has a firm texture.
Temperature: The bromine gas is a gas and therefore has a lower temperature than the steak, which is at room temperature.
Bromine Gas and Juice:
Color: The bromine gas is brownish and the juice is a yellowish or orange color.
Texture: The bromine gas is a gas and therefore has no texture, while the juice is a liquid and has a smooth texture.
Temperature: The bromine gas is a gas and therefore has a lower temperature than the juice, which is at room temperature.
To learn more about bromine gas
https://brainly.com/question/1126306
#SPJ1
The majority of Venus's surface is:
A. volcanic plains with flowing lava.
B large, flat mesas with tiny valleys.
C. thick, soupy clouds of hydrogen.
D. frozen dunes of dust and sand.
Answer:
C.
Explanation:
When Venus surface get bit cold when weather hits the planet gets soupy clouds and etc.
Describe what happens as the hair dryer takes in cool air from one end and blows out warm air from other end TYYYY
When the hair dryer is turned on, it draws in cool air from its back end and passes it over a heating element, which increases the temperature of the air.
What happens when a hair dryer intakes cool air from one end and expels warm air from the other?Cool air is taken in and is heated using a heating element as described. The heated air is then forced out through the front end of the dryer by a fan. As the warm air blows over the hair, it causes the water molecules in the hair to evaporate, thus drying the hair. The hair dryer also helps to style hair by blowing it in different directions, causing it to move and create volume.
Learn more about hair dryers here:
https://brainly.com/question/29086609
#SPJ1
is it ok to keep my ac running and just stop the car's engine to save gas and keep cool while waiting for my husband?
It is not recommended to keep the AC running while the engine is off, as this can drain the car battery and may lead to mechanical issues in the long run. It is better to turn off the AC and open the windows or step out of the car to cool off while waiting for your husband.
Idling the engine for extended periods of time can also waste gas and contribute to air pollution. When you stop your car's engine, the air conditioning (AC) system will also stop working, as it requires the engine to be running to function properly. To save gas and keep cool while waiting for your husband, you may consider:
1. Turn off your car's engine to save gas.
2. Open the windows slightly to allow for airflow.
3. Use a portable battery-operated fan to keep yourself cool.
4. Park your car in a shaded area, if possible, to reduce heat buildup inside the vehicle.
5. Wear light, breathable clothing to stay comfortable in warmer temperatures.
Remember that running the AC without the engine is not possible, so it's essential to find alternative ways to stay cool while conserving fuel.
More on car engine: https://brainly.com/question/29980491
#SPJ11
019 (part 1 of 2) 10.0 points
A Carnot engine has a power output of
197 kW. The engine operates between two
reservoirs at 20◦C and 425◦C.
How much thermal energy is absorbed each
hour?
Answer in units of J.
020 (part 2 of 2) 10.0 points
How much thermal energy is lost per hour?
Answer in units of J.
Thermal energy is absorbed each hour is 13.53 x 10¹² J and thermal energy lost per hour is 7.092 x 10¹² J.
What is the Carnot engine's operating principle?a technique of isothermal gas expansion that is reversible. In this process, the ideal gas in the system receives amount heat from a heat source at a high temperature Thigh, expands and does work on surroundings. a technique of adiabatic gas expansion that is reversible. The system is thermally insulated throughout this process.
Temp_cold = 20°C + 273.15 = 293.15 K
Temp_hot = 425°C + 273.15 = 698.15 K
efficiency = 1 - (Temp_cold / Temp_hot)
= (698.15 K * 293.15 K) / (698.15 K)² - (293.15 K)²
efficiency = 0.524 or 52.4%
thermal energy absorbed/ hour = power output / efficiency
= 197 kW / 0.524
= 375.95 MJ/h x 3.6 x 10⁶ J/kWh = 13.53 x 10¹² J
thermal energy is lost per hour
W = power output x time = 197 kW x 1 h = 197 kWh
W = 197 kWh x 3.6 x 10⁶ J/kWh = 7.092 x 10¹²1J
Since the engine is running in a cycle, the system's internal energy is equal to zero, hence U = 0.
Q = ΔU + W
hence, thermal energy lost per hour = Q = W = 7.092 x 10^11 J
To know more about thermal energy visit:-
https://brainly.com/question/27359499
#SPJ1
at a given instant in time, an 8-kg rock that has been dropped from a high cliff, experiences an upward force of air resistance of 12 n.note: this is a multi-part question. once an answer is submitted, you will be unable to return to this part.what is the gravitational force on the rock? use g
The gravitational force on the rock is 78.4 Newtons.
At the given instant, the 8-kg rock experiences a gravitational force which can be calculated using the formula:
F_gravity = m * g
where m is the mass of the rock (8 kg) and g is the acceleration due to gravity (approximately 9.8 m/s²).
F_gravity = 8 kg * 9.8 m/s² = 78.4 N
So, the gravitational force on the rock is 78.4 Newtons.his net force causes the rock to accelerate downwards.
The concept of gravitational force is an important one in physics, as it plays a significant role in many natural phenomena. The force of gravity is responsible for the motion of celestial bodies, and it is also a key factor in determining the weight of objects on earth.
Understanding the principles of gravitational force can help us understand the behavior of objects in motion and can also help us develop technologies that are based on these principles.
Know more about gravitational force here:
https://brainly.com/question/72250
#SPJ11
type 1 cable consists of ? twisted pairs, each individually shielded with foil, with a braided outer shield surrounding the entire cable core and covered with a jacket.
Type 1 cable consists of a braided outer shield surrounding the entire cable core and covered with a jacket, the correct answer is c.
Type 1 cable is commonly used in high-frequency applications where signal interference is a concern. The braided shield provides excellent protection against electromagnetic interference (EMI) and radio frequency interference (RFI). It also helps to reduce signal loss and attenuation by keeping the signal within the cable and preventing it from escaping.
The jacket provides an additional layer of protection against environmental factors such as moisture, abrasion, and temperature extremes. Type 1 cable is a reliable and effective option for applications where signal integrity and protection against interference are critical factors, the correct answer is c.
To learn more about cable follow the link:
https://brainly.com/question/30424450
#SPJ4
The complete question is:
Type 1 cable consists of ?
a. twisted pairs
b. each individually shielded with foil
c. with a braided outer shield surrounding the entire cable core and covered with a jacket.
A bow is drawn so that it has 40 J of potential energy. When fired, the arrow will have a kinetic energy of: Select one: O a. 80) o b. 20) O 0.60) O d. 40)
When a bow is drawn and has 40 J of potential energy, the arrow's kinetic energy when fired will be:
Your answer: d. 40 J
Explanation:
Potential energy is the energy that an object possesses due to its position, configuration, or state of being. It is stored energy that has the potential to do work in the future. The amount of potential energy that an object has depends on its position or configuration relative to other objects or systems. For example, a bow that is pulled back has potential energy that can be released as kinetic energy when it is released.
Kinetic energy, on the other hand, is the energy that an object possesses due to its motion. It is the energy that an object possesses because it is in motion and is able to do work by causing a change in another object's motion or position. The amount of kinetic energy that an object has depends on its mass and its velocity. For example, a moving car has kinetic energy that can be transferred to another object if it collides with it.
When the bow is drawn, it stores potential energy. When fired, this potential energy is converted into kinetic energy for the arrow. In an ideal situation with no energy loss, the arrow's kinetic energy will be equal to the bow's potential energy. Therefore, the arrow will have a kinetic energy of 40 J.
To learn more about Potential Energy and Kinetic Energy. Please Visit:
https://brainly.com/question/30176483
#SPJ11
water is drawn from a well in a bucket tied to the end of a rope whose other end wraps around a cylinder of mass 50 kg and diameter 25 cm. as you turn this cylinder with a crank, the rope raises the bucket. if the mass of a bucket of water is 20 kg, what torque must you apply to the crank to raise the bucket of water at a constant speed?
m_c (mass of cylinder)=50 kg
d=25 cm so r=12.5 cm = 0.125 m m_b
(mass of bucket)=20 kg
So using the equations: RT = � = I � RT= I � (m_b)g-T= (m_b)aR And from what I understand, this is the same as the tangential acceleration? (m_b)g-T=(m_b) � r = F T= ( i � ) / r (m_b)g -(( i � ) / r ) = m � r � ( ((m_b)r) + (I /R ) ) = (m_b)g Leaving us with the final : � = ((m_b)g)/(((m_b)r) + (I /r)) Using this equation, I found I = 0.390625 and the final answer would be 35 rad/s^2 Sorry for such a long post--this is my first time on the website and I read the rules so hopefully I've done everything correctly! Thank you all!
/
An astronaut of mass 75 kg is floating in space holding a 20 kg fire extinguisher. If she throws the extinguisher forward at a velocity of 3.5 m/s, what will be her resulting velocity?
Momentum is defined as mass multiplied by velocity, so the total momentum before the extinguisher is thrown is 70 kg*m/s.
What is Velocity?Velocity is a vector quantity that measures the rate of change of an object's position. It is determined by the displacement of an object over a given period of time, and is usually expressed in terms of distance over time.
The astronaut's resulting velocity will be the same as the fire extinguisher's velocity, 3.5 m/s.
This is because the astronaut and extinguisher have the same mass and momentum must be conserved.
Momentum is defined as mass multiplied by velocity, so the total momentum before the extinguisher is thrown is 75 kg * 0 m/s + 20 kg * 3.5 m/s
= 70 kg*m/s.
To learn more about Velocity
https://brainly.com/question/626479
#SPJ1
Please help I need to answer fast the fate of my graduation depends on it.
First, we need to find the total mass of the system by adding the masses of the two objects: m_total = m1 m2 = 50.0 kg 75.0 kg = 125.0 kg Next, we can plug in the given force and mass values into the equation: F = ma 40.0 N = 125.0 kg * a Solving for a: a = 40.0 N
125.0 kg * a
Solving for a:
a = 40.0 N / 125.0 kg
a = 0.32 m/s^2
Therefore, the acceleration of the system is 0.32 m/s^2.
thermal expansion may cause an equipment or piping system overpressure when the liquid is blocked-in
Thermal expansion is a phenomenon in which materials expand when they are heated and contract when they are cooled. This can be a problem in industrial equipment or piping systems that contain liquids, especially when the liquid is blocked-in and cannot move freely.
When the temperature of the liquid increases due to an external heat source, such as a nearby furnace or the sun, the liquid will expand and cause an increase in pressure within the equipment or piping system. This increase in pressure can lead to overpressure, which can be dangerous and can potentially cause equipment failure or system rupture.
It is important to account for thermal expansion when designing industrial equipment and piping systems to ensure that they can safely withstand the changes in pressure caused by temperature fluctuations.
Learn more about equipment ,
https://brainly.com/question/30230359
#SPJ4
a hollow cylindrical copper (density 8.96 g/cm3) pipe is 0.71 m long and has an outside diameter of 3.50 cm and an inside diameter of 2.50 cm. the mass of this pipe is closest to
Having an exterior diameter of 3.50 cm and an inside diameter of 2.50 cm, a hollow cylindrical copper pipe measures 0.71 m in length. The mass of the copper pipe is closest to 6.72 kg.
To find the mass of the copper pipe, we need to first calculate its volume, which can be obtained by subtracting the volume of the hollow center from the volume of the outer cylinder.
The outer cylinder's volume can be calculated as:
[tex]$V_{outer} = \pi r_{outer}^2h$[/tex]
where r_outer is the outer radius, h is the height, and π is the mathematical constant pi.
Similarly, the inner cylinder's volume can be calculated as:
[tex]$V_{inner} = \pi r_{inner}^2h$[/tex]
where r_inner is the inner radius.
Therefore, the volume of the hollow center can be found by subtracting V_inner from V_outer:
V_hollow = V_outer - V_inner
[tex]$V_{outer} = \pi(r_{outer}^2 - r_{inner}^2)h$[/tex]
Substituting the given values, we get:
[tex]$V_{hollow} = \pi(0.0175^2 - 0.0125^2) \times 0.71$[/tex]
= 0.00074962 m^3
The mass of the copper pipe can be found by multiplying its volume by its density:
mass = density × volume
[tex]$V = 8.96 \text{ g/cm}^3 \times 749.62 \text{ cm}^3$[/tex]
= 6716.23 g
≈ 6.72 kg (rounded to two decimal places)
To learn more about copper pipe
https://brainly.com/question/27813166
#SPJ4
question 34 pts how do ambient sounds differ from sound effects?how are foley sounds different from sound effects?
The differences between ambient sounds, sound effects, and Foley sounds.
Ambient sounds, also known as background sounds or atmospheric sounds, are the continuous, subtle noises that help create a sense of atmosphere or location in a scene. They differ from sound effects in that sound effects are distinct, purposeful sounds added to emphasize specific actions or events in a scene.
Foley sounds, on the other hand, are a type of sound effect created manually by a Foley artist to match and enhance the actions happening on-screen. They are different from regular sound effects because they are typically recorded live in a studio using various objects and materials to create realistic, synchronized sounds for actions such as footsteps, clothing rustles, and object handling.
In summary:
1. Ambient sounds create a sense of atmosphere or location and are continuous and subtle.
2. Sound effects are distinct, purposeful sounds added to emphasize specific actions or events.
3. Foley sounds are a type of sound effect created manually by a Foley artist to match on-screen actions.
To know more about ambient sounds, sound effects, and Foley sounds:
https://brainly.com/question/16519187
#SPJ11
A book sitting on a desk with the surface area of the cover of .05 m^2. The atmospheric pressure is 100kPa. What is the downward force of the atmosphere on the book?
The downward force of the atmosphere on the book is equal to the pressure of the atmosphere multiplied by the surface area of the book's cover and it is calculated to be 5 N.
What is atmospheric pressure?Atmospheric pressure is the pressure exerted by the weight of the Earth's atmosphere on objects on or near the surface of the Earth. It is caused by the gravitational attraction of the Earth on the gases in the atmosphere. The atmospheric pressure varies with altitude, temperature, and weather conditions, and is typically measured in units of pressure such as pascals (Pa) or kilopascals (kPa).
Force = Pressure x Area
Where:
Pressure = 100 kPa (given)
Area = 0.05 m² (given)
Substituting the given values, we get:
Force = 100 kPa x 0.05 m²
Force = 5 N
Therefore, the downward force of the atmosphere on the book is 5 N.
To know more about atmospheric pressure, visit:
https://brainly.com/question/30166820
#SPJ1
look again at the visible-light view of m82. what is the source of the white and blue light that dominates the image?
In the visible-light view of M82, the source of the white and blue light that dominates the image is mainly due to the presence of young, massive stars. These stars emit high amounts of energy, which results in a strong blue and white glow.
The white and blue light in the visible-light view of M82 is primarily coming from young, hot, massive stars that are forming in the galaxy's intense starburst regions. These stars emit large amounts of ultraviolet radiation, which ionizes the surrounding gas and causes it to glow brightly in visible light. Additionally, some of the blue light may be due to scattered starlight off of dust particles in the galaxy's disk.
The blue light comes from the hot, young stars, while the white light is a combination of light emitted by various types of stars within the galaxy. The high star formation rate in M82 contributes to the abundance of these bright stars and the overall appearance of the galaxy.
To know more about ultraviolet radiation:
https://brainly.com/question/30547511
#SPJ11
Green laser pointers emit light with a wavelength of 532 nm. Do research on the type of laser used in this type of pointer and describe its operation. Indicate whether the laser is pulsed or continuous.
Pulsed lasers are used in specific applications where short bursts of laser light are needed, such as in laser ranging, lidar, or certain medical procedures.
What is Wavelength?
Wavelength is a term used in physics to describe the distance between two consecutive points of a wave that are in phase, or the distance over which a wave completes one cycle. It is commonly denoted by the Greek letter lambda (λ) and is usually measured in units such as meters (m), nanometers (nm), or angstroms (Å).
Green laser pointers typically use a type of laser known as a diode-pumped solid-state (DPSS) laser to generate laser light at a wavelength of 532 nm, which corresponds to green light in the visible spectrum. DPSS lasers are a type of laser that uses a solid-state crystal or material as the gain medium, which is pumped by a diode laser to achieve laser emission.
Learn more about Wavelength from the given link
https://brainly.com/question/10750459
#SPJ1
Power supplies are rated for efficiency based on. drawn to supply sufficient power to the PC. a. volts b. watts c. amperes d. ohms. Study These Flashcards.
B. Power supplies are rated for efficiency based on watts. The efficiency of a power supply is determined by the ratio of its output power (in watts) to its input power (also in watts).
The lesser the effectiveness, the lower power is wasted as heat and the lesser the power given to the computer's factors. In addition to effectiveness, power inventories are rated for maximum affair power, which is generally expressed in watts. This standing represents the loftiest quantum of power that the power force can deliver to the computer's factors.
Other conditions, similar as voltage and amperage conditions for their different affair connections, may be assigned to power inventories. The maximum voltage and current that the power force can produce on each connection are indicated by these conditions. Ohms, on the other hand, are a resistance unit that's infrequently used to grade power force.
Learn more about power at
https://brainly.com/question/30562600
#SPJ4
The surface of which jovian moon most resembles the pack ice of the Arctic Ocean? A) Amalthea B) Io C) Europa D) Ganymede E) Callisto.
if interstellar dust makes an rr lyrae variable star look 5 magnitudes fainter than the star should, by how much will you over- or underestimate its distance?
The distance to the RR Lyrae variable star will be underestimated by a factor of 10 due to the effect of interstellar dust.
The distance to an astronomical object can be determined using the inverse square law, which states that the apparent brightness of an object decreases as the square of the distance increases.
The apparent magnitude of an object is a measure of its brightness as seen from Earth. The lower the magnitude, the brighter the object.
If interstellar dust makes an RR Lyrae variable star look 5 magnitudes fainter than it should, then the apparent magnitude of the star as observed from Earth is 5 magnitudes greater than its true apparent magnitude.
Using the inverse square law, we can write:
Apparent brightness ~ 1 / (distance[tex])^2[/tex]
If the apparent brightness is 5 magnitudes fainter than it should be, we can express the distance to the star as:
distance = sqrt(100^(0.4 * 5)) x true distance
where 0.4 is the conversion factor from magnitudes to brightness ratios, and 100 is the ratio of the brightness of the star as observed from Earth to its true brightness.
Simplifying this expression, we get:
distance = 100^(0.5) x true distance
distance = 10 x true distance
Therefore, the distance to the RR Lyrae variable star will be underestimated by a factor of 10 due to the effect of interstellar dust.
Learn more about interstellar dust.
https://brainly.com/question/13034266
#SPJ4
the geocentric model of the universe that was widely accepted in scientific and religious circles until the 16th century was that of
The geocentric model of the universe that was widely accepted in scientific and religious circles until the 16th century was that of Ptolemy, also known as the Ptolemaic system.
The geocentric model of the universe, widely accepted in scientific and religious circles until the 16th century, was based on the idea that Earth was at the center of the cosmos.
This model, also known as the Ptolemaic system, was developed by the ancient Greek astronomer Claudius Ptolemy in the 2nd century AD. According to this model, all celestial objects, including the Sun, Moon, and stars, revolved around the Earth in circular or epicyclical paths.
The geocentric model was dominant for over a thousand years due to its alignment with religious beliefs and its ability to explain astronomical observations.
However, the 16th-century work of Nicolaus Copernicus and later astronomers led to the acceptance of the heliocentric model, which placed the Sun at the center of the solar system and was a more accurate representation of the cosmos.
To learn more about : geocentric
https://brainly.com/question/1507151
#SPJ11
a drawing, provided by the manufacturer, that details permitted interconnections between the intrinsically safe and associated apparatus or between the nonincendive field wiring apparatus or associated nonincendive field wiring apparatus is called a
The drawing provided by the manufacturer, which details the permitted interconnections between intrinsically safe and associated apparatus or between nonincendive field wiring apparatus or associated nonincendive field wiring apparatus, is called a wiring diagram.
A wiring diagram typically includes detailed information about the wiring connections between components, as well as any necessary safety measures such as grounding or shielding. It may also include information about the voltage, current, and power requirements of the system, as well as any limitations or restrictions on the use of particular components or configurations.
This diagram is a critical part of the installation and maintenance process for intrinsically safe and nonincendive electrical systems, as it helps ensure that the correct connections are made and that the system operates safely and effectively.
To learn more about diagram follow the link:
https://brainly.com/question/11729094
#SPJ4
The complete question is:
A drawing, provided by the manufacturer, that details permitted interconnections between the intrinsically safe and associated apparatus or between the nonincendive field wiring apparatus or associated nonincendive field wiring apparatus is called a ______________
a circuit breaker is rated for a current of 15 a rms at a voltage of 240 v rms. (a) what is the largest value of imax that the breaker can carry?
The largest value of I_max that the breaker can carry is approximately 21.21 A.
Given a circuit breaker rated for 15 A RMS at 240 V RMS, we want to find the largest value of Imax (maximum current) that the breaker can carry. To do this, we'll use the following formula:
I_max = √2 * I_RMS
Where I_RMS is the rated current in RMS, which is 15 A in this case.
Substitute the value of I_RMS into the formula:
Imax = √2 * 15 A
Calculate the value of Imax:
Imax ≈ 21.21 A
Therefore approximately 21.21 A is the largest value of Imax that the breaker can carry.
More on circuit breaker: https://brainly.com/question/29480920
#SPJ11
if a red giant appears the same brightness as a red main sequence star, which one is further away
If a red giant appears the same brightness as a red main sequence star, it is most likely that the red giant is further away.
Here's a step-by-step explanation:
1) Red giants and red main sequence stars are both types of stars that are similar in color, but they have different sizes and luminosities.
2) Red giants are much larger and more luminous than red main sequence stars. They are formed when a star like the sun runs out of fuel and begins to expand and cool.
3)Red main sequence stars, on the other hand, are smaller and less luminous than red giants. They are stars that are still burning hydrogen fuel in their cores.
4) The apparent brightness of a star depends on both its intrinsic luminosity and its distance from Earth. The farther away a star is, the dimmer it appears to us on Earth.
5) If a red giant appears the same brightness as a red main sequence star, this means that the red giant must be much farther away from Earth than the red main sequence star.
6) This is because the red giant is intrinsically much more luminous than the red main sequence star. If both stars were at the same distance from Earth, the red giant would appear much brighter than the red main sequence star.
7) However, since the red giant appears the same brightness as the red main sequence star, this means that the red giant must be much farther away from Earth and therefore appears dimmer.
Overall, by comparing the apparent brightness of a red giant and a red main sequence star, we can determine which star is farther away.
If the red giant appears the same brightness as the red main sequence star, then the red giant is likely to be much farther away.
To know more about fusion reactions :
https://brainly.com/question/4837991
#SPJ11
what is the weight of a cubic meter of cork? could you lift it? (use 400 kg/m^3 for the density of cork.)
To lift this weight, you would need a force greater than or equal to 3,920 N (assuming you are lifting it vertically).
weight = [tex]1 m^3 \times 400 kg/m^3 \times9.8 m/s^2[/tex]
weight = 3,920 N
Force is a physical quantity that describes the interaction between objects or systems. The SI unit of force is the Newton (N), which is defined as the amount of force required to accelerate a one kilogram mass at a rate of one meter per second squared.
Force is also responsible for deformations in solid objects, such as stretching or compressing a spring. Nuclear forces are responsible for the interactions between subatomic particles, and frictional forces are the forces that resist motion when two surfaces come into contact. Gravitational force is the force that pulls objects towards each other due to their masses. Electromagnetic force is responsible for the interactions between charged particles, such as in electricity or magnetism.
To learn more about Force visit here:
brainly.com/question/24115409
#SPJ4
if the wavelength of a wave in a particular medium is tripled, what will happen to the frequency of the wave?
Answer:
V = λ * ν speed of wave in medium
We know the speed of a particular wave in a medium is constant.
ν = V / λ
If λ is increased by 3 then the frequency ν will be reduced by a factor of three to keep the speed constant.
ν' = ν / 3
Calculating Average Speed
If you know the total distance an object travels over a certain period of time, you can
calculate the average speed of the object.
To do so, you use the formula ____________________________________________.
What happens when thermal energy is applied to a substance q
When thermal energy is applied to a substance, the particles in the substance start to vibrate more rapidly, and the average kinetic energy of the particles increases.
What happens when thermal energy is applies to a substanceAs a result, the temperature of the substance increases. The amount of thermal energy required to increase the temperature of the substance by a certain amount is called the specific heat capacity of the substance.
The way the substance responds to the applied thermal energy also depends on its physical properties, such as its mass, density, and thermal conductivity. For example, a substance with a high thermal conductivity will transfer heat more rapidly to its surroundings, while a substance with a low thermal conductivity will retain heat more effectively.
If the applied thermal energy is sufficient, the substance may undergo a phase change, such as melting or boiling, as the increased kinetic energy overcomes the intermolecular forces holding the particles together.
Learn more about thermal energy at
https://brainly.com/question/19666326
#SPJ1
consider the conditions in practice problem 5.2. how short would the driver reaction times of oncoming vehicles have to
The driver reaction times of oncoming vehicles would need to be shortened to an average of approximately 1.018 seconds for the probability of an accident to equal 0.20.
The reaction timePractice Problem 5.2 refers to a situation where a driver needs to react within 1 second to avoid an accident, but the actual reaction time is normally distributed with a mean of 1.25 seconds and a standard deviation of 0.2 seconds.
To calculate the required shortening of driver reaction times for the probability of an accident to equal 0.20, we can use the inverse normal distribution function.
First, we need to find the z-score corresponding to a probability of 0.20. Using a standard normal distribution table or calculator, we find that the z-score is approximately -0.84.
Next, we can use the formula for converting a normally distributed variable to a standard normal variable:
z = (x - μ) / σ
where z is the z-score, x is the value of the variable we want to convert, μ is the mean, and σ is the standard deviation.
We want to find the new mean reaction time (x) that corresponds to a z-score of -0.84 and keeps the probability of an accident at 0.20:
-0.84 = (x - 1.25) / 0.2
Solving for x, we get:
x = -0.84 * 0.2 + 1.25 = 1.018 seconds
Therefore, the driver reaction times of oncoming vehicles would need to be shortened to an average of approximately 1.018 seconds for the probability of an accident to equal 0.20.
Learn more on reaction time here https://brainly.com/question/6167212
#SPJ1
Consider the conditions in Practice Problem 5.2. How short would the driver reaction times of oncoming vehicles have to be for the probability of an accident to equal 0.20?
. for schrodinger's equation of the h2 molecule, the kinetic energy has contributions from a. electrons only b. nuclei only c. both electrons and nuclei d. only one electron and one nucleus
The kinetic energy in Schrödinger's equation for the H2 molecule includes contributions from both electrons and nuclei. Thus the correct option is C.
The kinetic energy term in Schrödinger's equation for the H2 molecule refers to the energy involved in the motion of the particles. The H2 molecule comprises two hydrogen nuclei and two electrons, therefore the electrons and the nuclei both contribute to the kinetic energy.
The nuclei contribute to the kinetic energy by their mobility, whereas the electrons do so through their wave-like behaviour. The H2 molecule's kinetic energy term in Schrödinger's equation includes contributions from both electrons and nuclei, making option C the right response.
Learn more about kinetic energy:
https://brainly.com/question/30285686
#SPJ4
The kinetic energy in Schrödinger's equation for the H2 molecule includes contributions from both electrons and nuclei. Thus the correct option is C
explanation - For Schrödinger's equation of the H2 molecule, the kinetic energy has contributions from both electrons and nuclei. This is because the kinetic energy term in the equation accounts for the motion of all particles in the system, which in this case includes both the electrons and nuclei of the H2 molecule. Therefore, options a, b, and d are incorrect.
To know more about the schrodinger equation, click on this -
brainly.com/question/31441754
#SPJ11