Answer:
9.93 × 10²³ atomsExplanation:
The number of atoms of potassium can be found by using the formula
N = n × Lwhere n is the number of moles
N is the number of entities
L is the Avogadro's constant which is
6.02 × 10²³ entities
From the question we have
N = 1.65 × 6.02 × 10²³
We have the final answer as
9.93 × 10²³ atomsHope this helps you
Being farther from the nucleus and with more electrons shielding the protons results in the valence electrons being held ...
Answer:
electrons
Explanation:
since they are at the outer part of nucleus
Answer:
Weakly
Explanation:
Being farther from the nucleus and with more electrons shielding the protons results in the valence electrons being held weakly.
The effect of the nuclear pull will not be felt so strongly by the valence electrons. The valence electrons are the outermost electrons that occupies a shell. When the inner orbital electrons are much and the atomic radius is large, the valence electrons are well shielded. This results in electropositivity and a low ionization energy.What is Constituent Element?
Answer:
hope it helps...
Explanation:
a constituent element, material, etc.; component. a person who authorizes another to act in his or her behalf, as a voter in a district represented by an elected official. Grammar. an element considered as part of a construction. Compare immediate constituent, ultimate constituent.
If this helped please comment...
Carl makes the table below to determine the number of atoms of each element in the chemical formula 4Ca(ClO3)2.
A table with 3 columns and 2 rows. The first column labeled element has entries calcium, chlorine, oxygen. The second column labeled calculation has entries 1 times 4 , 1 times 2, 3 times 2. The third column labeled total atoms has entries 4, 2, 6.
What mistake did Carl make?
Answer:
calcium chloride oxide
Answer:
He did not multiply the chlorine and oxygen atoms by the coefficient 4
Explanation:
I just took the quiz
Which of these changes is a chemical change?
A. A block of ice forms liquid water when salt is sprinkled on it.
B. A block of ice is crushed into small pieces.
C. A block of ice melts when heated.
D. A block of ice fizzes and forms a gas when sodium is sprinkled on
it.
please help :)
Brian is making a cake for his friend's birthday. He combines the ingredients for the cake and then pours the batter into two pans and bakes them for 45 minutes in the oven. While the pans are in the oven, he combines butter, sugar, and milk and mixes them together to make the icing. What type of changes created the cake and the icing?
A. Both the icing and the cake are formed by physical changes.
B. Both the icing and the cake are formed by chemical changes.
C. The icing is formed by a chemical change and the cake is formed by a physical change.
D. The cake is formed by a chemical change and the icing is formed by a physical change.
Answer:
it’s D.The cake is formed by a chemical change and the icing is formed by a physical change
Explanation:
It’s because when the cake was baking there was nothing physical about it so it was a chemical change the icing is formed by a physical change because all you did was mix three ingredients together
The type of changes that created the cake and the icing is;
Option D; The cake is formed by a chemical change and the icing is formed by a physical change.
This is about understanding type of changes in chemistry.
Physical change is defined as a change that affects the form of a compound or element but it doesn't affect its' chemical composition.Meanwhile, chemical change is defined as a change that affects the composition of a compound and a new substance is formed.Now, for brian's cake he has combined raw ingredients into two pans and bakes the cake. For the cake to be baked, it means the ingredients mixed have changed from liquid to solid and also a new substance has been formed. Thus, we can say that the cake was formed from chemical change.Meanwhile, the icing was formed by physical change because it did not undergo any chemical process and no new substance was formed as only butter, sugar and milk were mixed together.Read more at; https://brainly.com/question/19046658
help
if you start with a substance as a solid what will happen to the molecules as you add thermal energy (heat)?
Answer: One change of state happens when you add energy to the substance. This change of state is called melting. By adding energy to the molecules in a solid the molecules begin to move quicker and can break away from the other molecules.
Explanation: I hoped that helped!
If an element has an atomic number of 12 how many protons does each atom have?
Which container has gas stored at the highest temperature
Answer: 3
Explanation:
Answer:
kinetic energy
Explanation:
may be iam not sure
Carbon monoxide (CO) burns readily in oxygen (O2), forming
carbon Dioxide (CO2). Which of the follow equations is shows
this reaction and follows the law of conservation of mass?
Answer:
see attachment......
Scientists changed the genes of a tomato plant in order to produce a protein which is a natural pesticide. Why would this be classified as a positive mutation?
Answer:
The plant would be insect-resistant and improve its chances of success.
Explanation:
Select the correct answer. Which substance is made of polymers? A. marble B. protein C. salt D. steel
Answer:
the answer is B proteins
Explanation:
brainliest pls
Answer:
B. protein
Explanation:
A polymer is defined as a molecule which has 'n' number of monomer units.
Similarly proteins are also polymers as they are made up of amino acids and contain a number of repeated units just like polymers.
A student is attempting to identify an unknown liquid. She places 10 mL of the liquid in a test tube and begins heating it over a burner. She checks and records the temp every minute until it begins to boil. What is the independent variable?
Answer:
The time of heating
Explanation:
Let us analyse the experiment closely; the temperature of the liquid increases as the time of heating increases. This implies that the temperature of the liquid is dependent on the time of heating of the liquid. The longer the time of heating, the greater the increase in temperature until the boiling temperature is eventually attained.
Hence, the temperature of the liquid is the dependent variable, the time of heating is the independent variable when the heating rate is held constant.
Atoms and ions are all the same.
Answer:
Yes they are
Explanation:
Balance the following reaction. A coefficient of "1" is understood. Choose the option "blank" for the correct answer if the coefficient is "1."
C3H8 + O2 → CO2 + H2O
Answer:
Hope this helps!
Explanation:
If 100 yards = 1 football field, what is the length, in meters, of 4.9
football fields?
If you want to warm 3.10 g of water from 56.4 C to 82.4 C, how many calories would you need to add to the water?
Answer: 80.6
Explanation:
q = mcAt
we have the grams of water, temp change, and specific heat of water is 4.186 J/g so we can plug in our numbers to find the heat energy in joules
q = (3.10)(4.184)(82.4-56.4)
q= 337.2304 J
we need our answer to be in calories so divide our answer by 4.184 and we get 80.6 calories
The amount of calorie required to warm 3.10 g of water from 56.4°C to 82.4°C is 80.6 calories.
HOW TO CALCULATE CALORIES:
The amount of calories can be calculated by using the formula as follows:Q = m × c × ∆T
Where:
Q = amount of heat in caloriesc = specific heat capacity (J/g°C)∆T = change in temperature (°C)m = mass (g)According to this question, c = 4.184J/g°C, m = 3.10g, ∆T = 82.4°C - 56.4°C = 26°CQ = 3.10 × 4.184 × 26Q = 337.23JSince 1J = 0.2390057361 calories337.23 J = 80.6calories.Therefore, amount of calorie required to warm 3.10 g of water from 56.4°C to 82.4°C is 80.6 calories.Learn more at: https://brainly.com/question/8097823?referrer=searchResults
Un móvil se mueve con movimiento acelerado. En los segundo 2 y 3 los espacios recorridos son 90 y 120 m, Calcula la velocidad inicial y su aceleración
Answer:
La velocidad inicial es 55 [tex]\frac{m}{s}[/tex]y su aceleración es -10 [tex]\frac{m}{s^{2} }[/tex]
Explanation:
Un movimiento es rectilíneo uniformemente variado, cuando la trayectoria del móvil es una línea recta y su velocidad varia la misma cantidad en cada unidad de tiempo . Dicho de otra manera, este movimiento se caracteriza por una trayectoria que es una línea recta y la velocidad cambia su módulo de manera uniforme: aumenta o disminuye en la misma cantidad por cada unidad de tiempo. Y la aceleración es constante y no nula (diferente de cero).
En este caso la posición del objeto esta dada por la expresión:
[tex]x=x0+v0*t+\frac{1}{2} *a*t^{2}[/tex]
donde x es la posición del cuerpo en un instante dado, x0 la posición en el instante inicial, v0 la velocidad inicial y a la aceleración.
En este caso, por un lado podes considerar:
x= 90 mx0= 0 mv0= ?t= 2a= ?Reemplazando obtenes:
[tex]90=v0*2+\frac{1}{2} *a*2^{2}[/tex]
[tex]90=v0*2+\frac{1}{2} *a*4[/tex]
[tex]90=v0*2+2*a[/tex]
Y por otro lado tenes:
x= 120 mx0= 0v0= ?t= 3a= ?Reemplazando obtenes:
[tex]120=v0*3+\frac{1}{2} *a*3^{2}[/tex]
[tex]120=v0*3+\frac{1}{2} *a*9[/tex]
[tex]120=v0*3+\frac{9}{2} *a[/tex]
Por lo que tenes el siguiente sistema de ecuaciones:
[tex]\left \{ {{2*v0+2*a=90} \atop {3*v0+\frac{9}{2} *a=120}} \right.[/tex]
Resolviendo por el método de sustitución, que consiste en aislar en una ecuación una de las dos incógnitas para sustituirla en la otra ecuación, obtenes:
Despejando v0 de la primera ecuación:
[tex]v0= \frac{90-2*a}{2}[/tex]
Reemplazando en la segunda ecuación:
[tex]120=\frac{90-2*a}{2} *3+\frac{9}{2} *a[/tex]
Resolviendo:
[tex]120=(90-2*a)*\frac{3}{2} +\frac{9}{2} *a[/tex]
[tex]120=135-3*a +\frac{9}{2} *a[/tex]
[tex]120-135=-3*a +\frac{9}{2} *a[/tex]
[tex]-15=\frac{3}{2} *a[/tex]
[tex]\frac{-15}{\frac{3}{2} } =a[/tex]
-10=a
Reemplazando el valor de a en la expresión despejada anteriormente obtenes:
[tex]v0= \frac{90-2*(-10)}{2}[/tex]
Resolviendo:
[tex]v0= \frac{90+20}{2}[/tex]
[tex]v0= \frac{110}{2}[/tex]
v0=55
La velocidad inicial es 55 [tex]\frac{m}{s}[/tex]y su aceleración es -10 [tex]\frac{m}{s^{2} }[/tex]
PLEASE HELPPP
A(n) _________is a
group of atom. joined by chemical bonds.
THIS IS SCIENCE NOT CHEMISTRY
Answer; molecule
Explanation:
Which of the following best defines a basic solution?
which of the metal is suitable to store lead nitrate solution
Explanation:
The nitrate anion is a univalent (-1 charge) polyatomic ion composed of a single nitrogen atom ionically bound to three oxygen atoms (Symbol: NO3) for a total formula weight of 62.05. Lead Nitrate is generally immediately available in most volumes.
Why are molecular covalent compounds insoluble in water?
Answer:
Hope this will help.......
Explanation Covalent bonds are insoluble in water (H2O) , but covalent compounds are. This is because some organic compounds (covalent) contain the polar −OH group which can bond to a hydrogen ion to form water.
Ice floats due to its?
Answer: it floats because it’s less dense than water
Explanation: since it’s less dense it floats
Populations in the deep-sea vent ecosystem can get energy storage molecules without sunlight. Do you agree or disagree with this claim? Explain your answer.
Answer:
Agree
Explanation:
The deep-sea vent ecosystem gets energy storage molecules without sunlight. Life in the vent ecosystem relies on alternate energy through the use of hydrogen sulfide present in the water emanating from the vent.
The producers that form the basis of the food chain are bacteria that use the hydrogen sulfide to create energy-rich molecule in a process known as chemosynthesis.
The equation of the chemosynthesis is as below:
[tex]CO_2 + 4H_2S + O_2 --> CH_20 + 4S + 3H_2O[/tex]
A 5.0-mL sample of CO2 gas is enclosed in a gas-tight
syringe (Figure 11.3) at 22 °C. If the syringe is
immersed in an ice bath (0 °C), what is the new gas
volume, assuming that the pressure is held constant?
Answer:
3.5ML
Explanation:
At the constant pressure, the final volume of the carbon dioxide gas was equal to 4.62 ml at a temperature of 0ºC.
What is Charles's law for volume-temperature relation?Charles's law can be explained as when the pressure of the gas is kept constant, the volume of gas is directly proportional to the temperature of a gas.
The volume of the gas and the temperature of the gas have a direct relationship according to this law.
Therefore, V∝ T
or V₁/T₁ = V₂/T₂ ....................(1)
Given, the initial temperature of the CO₂ gas, T₁ = 22 ºC
T₁ = 22 + 273 = 295 K
The final temperature of the CO₂ gas, T₂ = 0ºC
T₂ = 0 + 273 = 273 K
The initial volume of the gas, V₁ = 5 ml
Substitute the value of V₁, T₁, and T₂ in equation (1 ) to get final volume of CO₂ gas:
5/295 = V₂/273
V₂ = 4.6 ml
Therefore, the final volume of the gas is equal to 4.6 ml at 0 ºC, when there is no change in the pressure.
Learn more about Charles's law, here:
brainly.com/question/16927784
#SPJ2
The #2 discovery was:
a
heliocentrism
0
E=MCP
c
heredity
general relativity
d
Answer:
bug vfyjovcduvcu Harris's
Which chemical equation below is balanced to follow the Law of Conservation of Mass?
H2 + Cl2 + HCl
o 2 H2 + Cl2 + 3 HCI
2 H2 + 2Cl2 → 2 HCI
H2 + Cl2 → 2 HCI
Answer:
Balanced Equation
H₂ + Cl₂ → 2HCI
Answer:
Balanced Equation
H₂ + Cl₂ → 2HCI
Explanation:
i did it and 100%
What is happening in this picture?
Answer:
in first picture pressure is low and in second picture the pressure is high
2ans in first picture air is
less amount
in second picture air is high amount
Which electron notation is incorrect?
1s 2s 2p 3s 3p 10
1s 2s 2p 3s 3p3
1s2 282 2p 3s 3p6
what is carbogen and it's uses
What is the concentration of hplus ions at a ph=11
Answer: 10^-11
Explanation:
to find the concentration of H+ ions given the ph, we use the formula 10^(-pH).
so 10^-11