How many days are in 52 weeks?

Answer:

You tell me the question properly and i will edit this and put answer

Step-by-step explanation:

Until then bye

Answer:

Read Explanation Below

Step-by-step explanation:

So... I didn't know what you were referencing nor did I see a paper, so I came up with a scenario that I thought would represent this number. (also, if you could send a picture so I know what you're referencing, that would be awesome)

1. When James took a nap at 3pm, he saw that the temperature outside was 70 degrees. However, when he woke up at 8pm, he checked the weather and it was 30 degrees. How much did the temperature change during his nap.  

Answer:

11

Step-by-step explanation:

Answer:

I would say Inductive reasoning.

Step-by-step explanation:

Inductive reasoning is defined as "A method of reasoning in which a body of observations is synthesized to come up with a general principle." and this is exactly what the doctor did to come up with his diagnosis.

Hope this helps you out a bit.

Answer:

Deductive reasoning

Step-by-step explanation:

Deductive reasoning, he was given some simple information and any person could simply assume he had poison ivy, as it was made clear he had most likely been around it. And deductive reasoning is basically reasoning based off a few questions from which you can draw a conclusion from.

Answer:

A

Step-by-step explanation:

You're looking for x-intercepts

From the graph you know that the x-intercepts are as follows:

x = -4, x = -2, x = 4

And this is when y or f(x) = 0

so you can rewrite each x-intercept as an equation

0 = x + 4

0 = x + 2

0 = x - 4

Now you know each of the terms

f(x) = (x-4)(x+2)(x+4)

Answer:

A choice.

Step-by-step explanation:

If you notice, you see the graph having x-intercepts which are x = 4, -2 and -4.

Because the graph passes through x = 4, -2 and -4, we have to find the function that satisfy x-values when f(x) = 0.

Finding x-intercepts, let f(x) = 0.

A choice

f(x) = (x-4)(x+2)(x+4)

Let f(x) = 0 to find x-intercepts.

0 = (x-4)(x+2)(x+4)

Then solve the equation like linear.

Hence, x = 4,-2,-4

Since the x-intercepts are (4,0),(-4,0) and (-2,0), it satisfies the graph and therefore A is correct.

Answer:

10x-8y=32

10x+15y=-60

-23y=92

y=-92/23

make as brainleast

The exponential equation is given by y = 700(2)ˣ

An exponential function is given by:

y = abˣ

where y, x are variables, a is the initial value of y and b is the multiplier.

Let y represent the population of fish after x hours.

Given that he starts with 700 fishes, hence

a = 700

The population of the fish doubles every year, hence:

b = 2

The exponential equation becomes:

y = 700(2)ˣ

Find out more at: https://brainly.com/question/12490064

Answer:

If your gonna ask it on groups its one group

Answer:

g≤6

Step-by-step explanation:

g≤6 inequality represents the given situation of at most.

" Inequality means an algebraic expression which represents the relation between two situation or values with the sign of > , < , ≥, ≤."

Term used

At most means 'less than to equals to' ( ≤ )

According to the question,

Given'

'g' represents the number of gold fish live in the tank

As per condition of inequality given,

Number of gold fish can live in small tank at most 6

Represent as the  term used we get,

Inequality is

g ≤ 6

Hence, g≤6 inequality represents the given situation of at most.

Learn more about inequality here

https://brainly.com/question/20383699

#SPJ2

Answer:

[tex]\huge\boxed{\sf 1 \ pound \ of \ dough = 1\frac{1}{5} \ cup \ of \ flour}[/tex]

Step-by-step explanation:

[tex]\displaystyle \underline{Given \ that:}\\\\\frac{5}{8} \ pound \ of \ dough = \frac{3}{4} \ cup\ of \ flour\\\\Multiply \ 8 \ to \ both \ sides\\\\5 \ pounds \ of \ dough = \frac{3}{4} \times 8 \ cup \ of \ flour\\\\5 \ pounds \ of \ dough = 3 \times 2 \ cup \ of \ flour\\\\5 \ pounds \ of \ dough = 6 \ cups \ of \ flour\\\\Divide \ both \ sides \ by \ 5\\\\1 \ pound \ of \ dough = \frac{6}{5} \ cup \ of \ flour\\\\\boxed{1 \ pound \ of \ dough = 1\frac{1}{5} \ cup \ of \ flour}\\\\[/tex]

[tex]\rule[225]{225}{2}[/tex]

Hope this helped!

The amount by which the length and width of a shed can be increased to

more than double the area, depends on the initial dimensions.

Reasons:

The given parameters of the shed are;

The length of the shed = 12 m

Width of the shed = 5 m

The amount by which the length and the width are increased = The same amount

The new area after the increase in the length and width of the shed = More than double the initial area

Required:

The amount of increase in the length.

Solution:

Let the amount by which the length and width are increased = x

We have;

Initial area of the shed = 12 m × 5 m = 60 m²

The new area = (12 + x) × (5 + x) > 2 × 60

By multiplication, we get;

(12 + x) × (5 + x) = x² + 17·x + 60 > 2 × 60 = 120

x² + 17·x + 60 - 120 > 120 - 120 = 0

x² + 17·x - 60 > 0

By factorization, we get;

(x + 20)·(x - 3) > 0

x > -20, or x > 3

The increase (positive) amount of the solution is x > 3

Therefore, the amount by which both the length and the width can be increased to more than double the area is x > 3 meters

Learn more about the area of a rectangle here:

https://brainly.com/question/16410706

Answer:

There are two stationary points

Note that 1/2 = 0.5

==========================================================

How to get those answers:

Stationary points occur when the derivative is zero, when the graph is neither increasing nor decreasing (i.e. it's staying still at that snapshot in time).

Apply the derivative to get:

f(x) = 4x^3 - 3x + 3

f ' (x) = 12x^2 - 3

Then set it equal to zero and solve for x.

f ' (x) = 0

12x^2 - 3 = 0

12x^2 = 3

x^2 = 3/12

x^2 = 1/4

x = sqrt(1/4) or x = -sqrt(1/4)

x = 1/2 or x = -1/2

x = 0.5 or x = -0.5

----------------------

Let's do the first derivative test to help determine if we have local mins, local maxes, or neither.

Set up a sign chart as shown below. Note the three distinct regions A,B,C

The values -0.5 and 0.5 are not in any of the three regions. They are the boundaries.

The reason why I split things into regions like this is to test each region individually. We'll plug in a representative x value into the f ' (x) function.

To start off, we'll check region A. Let's try something like x = -2

f ' (x) = 12x^2 - 3

f ' (-2) = 12(-2)^2 - 3

f ' (-2) = 45

The actual result doesn't matter. All we care about is whether if its positive or negative. In this case, f ' (x) > 0 when we're in region A. This tells us f(x) is increasing on the interval [tex]-\infty < x < -0.5[/tex]

Let's check region B. I'll try x = 0.

f ' (x) = 12x^2 - 3

f ' (0) = 12(0) - 3

f ' (0) = -3

The result is negative, so f ' (x) < 0 when [tex]-0.5 < x < 0.5[/tex]. The f(x) curve is decreasing on this interval.

The change from increasing to decreasing as we pass through x = -0.5 indicates that we have a local max here.

Plug x = -0.5 into the original function to find its paired y coordinate.

f(x) = 4x^3 - 3x + 3

f(-0.5) = 4(-0.5)^3 - 3(-0.5) + 3

f(-0.5) = 4

The point (-0.5, 4) is a stationary point. More specifically, it's a local max.

Side note: This is the same as the point (-1/2, 4) when written in fraction form.

----------------------

Let's check region C

I'll try x = 2

f ' (x) = 12x^2 - 3

f ' (2) = 12(2)^2 - 3

f ' (2) = 45

The positive outcome tells us that any number from region C does the same, and f ' (x) > 0 when [tex]0.5 < x < \infty[/tex]. The function f(x) is increasing on this interval.

Region B decreases while C increases. The change from decreasing to increasing indicates we have a local min when x = 0.5

Plug this x value into the original equation

f(x) = 4x^3 - 3x + 3

f(0.5) = 4(0.5)^3 - 3(0.5) + 3

f(0.5) = 2

The local min is located at (0.5, 2) which is the other stationary point.

The graph and sign chart are shown below.

The local min is located at (0.5, 2) which is the other stationary point.

Stationary points occur when the derivative is zero, when the graph is neither increasing nor decreasing.

Apply the derivative to get:

f(x) = 4x^3 - 3x + 3

f ' (x) = 12x^2 - 3

Then set it equal to zero and solve for x.

f ' (x) = 0

12x^2 - 3 = 0

12x^2 = 3

x^2 = 3/12

x^2 = 1/4

x = 1/2 or x = -1/2

x = 0.5 or x = -0.5

The first derivative test to help determine if we have local mins, local maxes, or neither.

A = numbers to the left of -0.5

B = numbers between -0.5 and 0.5 excluding both endpoints

C = numbers to the right of 0.5

Thus, The values -0.5 and 0.5 are not in any of the three regions. They are the boundaries.

Let's try something like x = -2

f ' (x) = 12x^2 - 3

f ' (-2) = 12(-2)^2 - 3

f ' (-2) = 45

In this case, f ' (x) > 0 when we're in region A.

Let's check region B x = 0.

f ' (x) = 12x^2 - 3

f ' (0) = 12(0) - 3

f ' (0) = -3

The result is negative, so f ' (x) < 0 when f(x) curve is decreasing on this interval.

The change from increasing to decreasing as we pass through x = -0.5 indicates that we have a local max here.

Substitute x = -0.5 into the original function to find its paired y coordinate.

f(x) = 4x^3 - 3x + 3

f(-0.5) = 4(-0.5)^3 - 3(-0.5) + 3

f(-0.5) = 4

The point (-0.5, 4) is a stationary point, it's a local max.

Let's check region C x = 2

f ' (x) = 12x^2 - 3

f ' (2) = 12(2)^2 - 3

f ' (2) = 45

The positive outcome tells us that any number from region C does the same, and f ' (x) > 0 when The function f(x) is increasing on this interval.

Susbtitute this x value into the original equation

f(x) = 4x^3 - 3x + 3

f(0.5) = 4(0.5)^3 - 3(0.5) + 3

f(0.5) = 2

Hence, The local min is located at (0.5, 2) which is the other stationary point.

Learn more about equations here;

https://brainly.com/question/10413253

#SPJ2

Answer:

762.24

Step-by-step explanation:

Rounded to the hundredth place

Answer:

It will take 5 minutes to make one balloon structure. 7 balloons are used in 1 sculpture For part b the answer would be: Tom's unit rate for balloons used per minute would be 1.4

Step-by-step explanation:

Answer:

[tex]\frac{4\sqrt{3} }3}[/tex]

Step-by-step explanation:

Since it is an equilaterla triangle, we can see the side opposite to that of side length 4 is 60 degrees. Since the other angle is a right angle (90 degrees), we can find that the other side is 30 degrees (the degrees add up to 180). We can also see that this is a 30-60-90. We can see that the side x, through the identity (you can find 30-60-90 identity online), we see that the side x is [tex]\frac{4}{\sqrt{3}}[/tex]. However, it is also asking us to simplify this, so we multiply the top and bottom by [tex]\sqrt{3}[/tex] and get [tex]\frac{4}{\sqrt{3} } = \frac{4\sqrt{3} }{3}[/tex]

Answer:

mnp/10000

Step-by-step explanation:

Same reasoning as above, but 100*100 is 10000 so there you go

Answer:

p/q = x

Step-by-step explanation:

Answer:

Where's the picture?

Step-by-step explanation:

The pressure in a fluid flowing with laminar flow through a pipe is given by

Hagen-Poiseuille equation.

The correct responses are;

Reasons:

When the flow is a steady incompressible flow through pipe, the flow rate

can be derived from the Hagen-Poiseuille equation as follows;

[tex]\displaystyle \dot V = \mathbf{\frac{\left[\Delta P - \rho \cdot g \cdot L \cdot sin\left(\theta \right) \right] \cdot \pi \cdot D^4 }{128 \cdot \mu \cdot L}}[/tex]

ΔP = 135 kPa - 88 kPa = 47 kPa

The density of the oil, ρ = 876 kg/m³

μ = 0.24 kg/(m·s)

L = 15 m

The diameter of the pipe, D = 1.5 cm = 0.015 m

(a) When the pipe is horizontal, we have;

θ = 0°

Which gives;

[tex]\displaystyle \dot V = \mathbf{\frac{\left[47 \times 10^3 - 876 \, kg/m^3 \times 9.81 \, m/s^2 \times 15 \, m \cdot sin\left(0^{\circ} \right) \right] \times \pi \times (0.015 \, m)^4 }{128 \times 0.24 \, kg/(m \cdot s) \times 15 \, m}}[/tex]

[tex]\displaystyle \dot V = \frac{\left[47 \times 10^3\, Pa - 128903.4\, Pa \cdot sin\left(0^{\circ} \right) \right] \times \pi \times (0.015 \, m)^4 }{128 \times 0.24 \, kg/(m \cdot s) \times 15 \, m}[/tex]

[tex]\displaystyle \dot V = \frac{\left[47 \times 10^3\, Pa - 128903.4 \, Pa \cdot sin\left(0^{\circ} \right) \right] \times \pi \times (0.015 \, m)^4 }{128 \times 0.24 \, kg/(m \cdot s) \times 15 \, m} =\frac{0.002379357\cdot \pi}{460.8}[/tex]

[tex]\displaystyle \dot V=\frac{0.002379357\cdot \pi}{460.8} = \mathbf{1.622 \times 10^{-5}}[/tex]

(b) When the pipe is inclined 8°, we have;

[tex]\displaystyle \dot V = \mathbf{\frac{\left[47 \times 10^3\, Pa - 128903.4\, Pa \cdot sin\left(8^{\circ} \right) \right] \times \pi \times (0.015 \, m)^4 }{128 \times 0.24 \, kg/(m \cdot s) \times 15 \, m}} = 1.003 \times 10^{-5} \, m^3/s[/tex]

(c) If the pipe is inclined 8° downward from the horizontal, we have;

[tex]\displaystyle \dot V = \frac{\left[47 \times 10^3\, Pa - 128903.4\, Pa \cdot sin\left(-8^{\circ} \right) \right] \times \pi \times (0.015 \, m)^4 }{128 \times 0.24 \, kg/(m \cdot s) \times 15 \, m} = 2.24\times 10^{-5} \, m^3/s[/tex]

Learn more about flow through pipes here:

https://brainly.com/question/6858718

Answer:

12+26x=64

Step-by-step explanation:

64-12=52

52/2=26

$26 per pass

equation 12+26x=64

x=2 in this case x is representing the number of passes

12 is the ticket

and 64 is total cost

Answer:

$1.20 for one pound of rice

Step-by-step explanation:

$9.60 ÷ 8 = $1.20

I hope this helps!

[tex]-5+\frac{i}{2i} = -5+\frac{1}{2}=-\frac{9}{2} =-4.5[/tex]

ok done. Thank to me :>

Answer:

A: 16.8

Step-by-step explanation:

4.2 and 16.8 both have decimal place values. If you line up the decimals when you add them, then you get 21.

The exponential function used to predict the number of visitors during month m is [tex]y = 600(2)^m[/tex]

An exponential function is in the form:

y = abˣ

where y, x are variables, a is the initial value of y and b is the factor.

Let y represent the number of visitors during month m.

There were 600 visits to the site the first month and they double each month, hence:

a = 600, b = 2

The exponential function is given by:

[tex]y = 600(2)^m[/tex]

Find out more on exponential function at: brainly.com/question/2456547

Answer:

Retainers have been designed to be used as an end of treatment to help retain your teeth in their new position. ... These are removable and fixed retainers. The reason why retainers can't be used to close a gap is because they are fitted at the end of treatment and are made to fit the straight teeth mould.

hope it help u

itz by Riddhi

Answer:

yes

Step-by-step explanation:

Answer:

Step-by-step explanation:

Aisha’s estimate is not reasonable.

They earned about $100 and spent about $120 so they should have about $20 less than they started with.

Answer:

y=7

Step-by-step explanation:

The slope is (7-7)/(3+7) = 0. So, the line is a horizontal line.

The y value of both points is 7.

Answer:

Step-by-step explanation:

Answer:

7a + 6

Step-by-step explanation:

Expand the brackets and then collect like terms. 4a + 3a = 7a

Answer:

Mode is 58 degrees

Step-by-step explanation: