Quinine in a 1.664-g antimalarial tablet was dissolved in sufficient 0.10 M to give 500 mL of solution. A 15.00-mL aliquot was then diluted to 100.0 mL with the acid. The fluorescence intensity for the diluted sample at 347.5 nm provided a reading of 327 on an arbitrary scale. A standard 100 ppm quinine solution registered 180 when measured under conditions identical to those for the diluted sample. Calculate the mass of quinine in milligrams in the tablet.
Answer:
605.6mg of quinine
Explanation:
Based on Lambert-Beer's law, the intensity of an optical measurement is directely proportional to its concentration.
Unknown concentration gives a reading of 327
100 ppm gives 180 of intensity
The concentration of the diluted quinine tablet is:
327 * (100ppm / 180) = 181.67 ppm. The final dilution
The concentration of the first diluted solution is:
181.67 ppm * (100.0mL / 15mL) = 1211ppm
ppm could be defined as mass of solute (In this case of quinine) in mg per liter of solution. That is:
1211mg / L
As the tablet was diluted to 500mL = 0.5L, the mass of the quinine is:
0.5L * (1211mg / L) =
605.6mg of quininePls help I’ll brainlest and add extra points
It’s due in 3 minutes please help
Answer:
The Answer is gonna be Indroduction of non-native plant species
How much water would I need to add to 700 mL of a 2.7 M KCl solution to make a 1.0 M solution?
Answer:
[tex]1190\ \text{mL}[/tex]
Explanation:
[tex]M_1[/tex] = Initial Concentration of KCl = 2.7 M
[tex]V_1[/tex] = Volume of KCl = 1 M
[tex]M_2[/tex] = Final concentration of KCl = 1 M
[tex]V_2[/tex] = Amount of water
We have the relation
[tex]M_1V_1=M_2V_2\\\Rightarrow V_2=\dfrac{M_1V_1}{M_2}\\\Rightarrow V_2=\dfrac{2.7\times 700}{1}\\\Rightarrow V_2=1890\ \text{mL}[/tex]
The amount of water that is to be added is [tex]1890-700=1190\ \text{mL}[/tex].
The product(s) of a heated reaction of N,N-ethylmethylpentanamide with sodium hydroxide would be __________. View Available Hint(s) The product(s) of a heated reaction of N,N-ethylmethylpentanamide with sodium hydroxide would be __________. sodium pentanoic acid and ethylmethylamine pentanoic acid and ethylmethylamine sodium propanoate and pentylamine sodium pentanoate and ethylmethylamine
Answer:
sodium pentanoate and ethylmethylamine
Explanation:
The reaction of N,N-ethylmethylpentanamide with sodium hydroxide involves an amide and an inorganic hydroxide.
The CO-N bond is highly polar hence the -N(C2H5) (CH3) moiety is easily lost and replaced by the -ONa leading to the formation of sodium pentanoate.
The H^+ combines with -N(C2H5) (CH3) to yield ethylmethylamine
PLEASE HELP ME PLEASEEE AND QUICK.
NO TROLL ACCOUNT AND POSTING A LINK TO NO WHERE, PLEASE. DONT. UR WASTING MY TIME.
SOMEONE PLEASE BE NICE.
Please answer ALL THREE if u can, thank you so so so so much!!!
Answer:
Eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
Explanation:
2. Water is an excellent solvent. With water being a polar
molecule, it can be an especially strong solvent for other
polar molecules. Give an example of how water acting as a
solvent is important for living organisms.
NO LINKS PLZ HELP
Answer:
Water acts as a solvent of carbon dioxide excreted from tissues, in blood and helps in regulating pH (because it forms carbonic acid that lowers pH when it tends to get higher). Blood pH should be maintained at about 7.4. One major reason is that the structure of protein is dependent ton pH because pH determines its ionization hence also affecting the charges and interaction between side groups of amino acids. A change in pH may, therefore, denature proteins and negatively affect cellular functions.
Explanation:
To get more on how water acts as a universal solvent check out brainly.com/question/7007192
what evidence Have you collected to explain The relationship between the seafloor Ready mid ocean ridges and ocean trenches
Answer:Abundant evidence supports the major contentions of the seafloor-spreading theory. First, samples of the deep ocean floor show that basaltic oceanic crust and overlying sediment become progressively younger as the mid-ocean ridge is approached, and the sediment cover is thinner near the ridge.
Explanation:
Which is an application of genetic engineering?
A.
destroying all bacteria
B.
creating synthetic insulin
C.
producing cells from nonliving material
D.
preventing weeds from spreading to farmland
Answer:
B. Creating synthetic insulin
Explanation:
In medicine, genetic engineering has been used to mass-produce insulin, human growth hormones, Follistim (for treating infertility), human albumin, monoclonal antibodies, antihemophilic factors, vaccines, and many other drugs. In research, organisms are genetically engineered to discover the functions of certain genes.
3.
The color of the powdered form of a mineral is called
O fracture
O cleavage
O luster
O streak
Answer:
D. Streak.
Explanation:
A mineral, in simple terms, can be defined as a solid inorganic substance that occurs in a pure form with a specific crystal structure. A mineral is identified based on its physical properties which include luster, color, streak, crystal shape, etc.
The color of the powdered form of a mineral is called a streak. A streak is a useful property in distinguishing sulfide and oxide minerals. To check the color of a mineral, it is rubbed against the surface of a ceramic streak plate or a piece of unglazed ceramic. In its finely powdered form, a mineral is easy to identify.
Therefore, option D is correct.
How are compositional layers distinguished?
Explanation:
The Earth has different compositional and mechanical layers. Compositional layers are determined by their components, while mechanical layers are determined by their physical properties.
The Earth has different compositional and mechanical layers. Compositional layers are determined by their components, while mechanical layers are determined by their physical properties.Information about the compositional layers
The Earth has different compositional and mechanical layers. Compositional layers are determined by their components, while mechanical layers are determined by their physical properties.Information about the compositional layersLayer Definition Depth
The Earth has different compositional and mechanical layers. Compositional layers are determined by their components, while mechanical layers are determined by their physical properties.Information about the compositional layersLayer Definition DepthCrust :The outermost solid layer of a rocky planet or natural satellite. Chemically distinct from the underlying mantle. 0-100km silicates
The Earth has different compositional and mechanical layers. Compositional layers are determined by their components, while mechanical layers are determined by their physical properties.Information about the compositional layersLayer Definition DepthCrust :The outermost solid layer of a rocky planet or natural satellite. Chemically distinct from the underlying mantle. 0-100km silicatesMantle :A layer of the Earth (or any planet large enough to support internal stratification) between the crust and the outer core. It is chemically distinct from the crust and the outer core. The mantle is not liquid. It is, however, ductile, or plastic, which means that on very long time scales and under pressure it can flow. The mantle is mainly composed of aluminum and silicates. 100-2900km iron and magnesium silicates
The Earth has different compositional and mechanical layers. Compositional layers are determined by their components, while mechanical layers are determined by their physical properties.Information about the compositional layersLayer Definition DepthCrust :The outermost solid layer of a rocky planet or natural satellite. Chemically distinct from the underlying mantle. 0-100km silicatesMantle :A layer of the Earth (or any planet large enough to support internal stratification) between the crust and the outer core. It is chemically distinct from the crust and the outer core. The mantle is not liquid. It is, however, ductile, or plastic, which means that on very long time scales and under pressure it can flow. The mantle is mainly composed of aluminum and silicates. 100-2900km iron and magnesium silicatesCore: The innermost layers of the Earth. The Earth has an outer core (liquid) and an inner core (solid). They are not chemically distinct from each other, but they are chemically distinct from the mantle. The core is mainly composed of nickel and iron. 2900-6370km meta
Which type of formula shows an element symbol for each atom and a line for each bond between atoms?
structural
molecular
empirical
ionic
Answer: structural
Explanation:
When metals and non metals combine in fixed proportion then a chemical compound is formed. Structural formula shows an element symbol for each atom and a line for each bond between atoms. The correct option is option A.
What is chemical formula?Chemical formula is a formula where cation and anion combine to form a molecule in fixed proportion. Metals combine in form of cation and non metals combine in form of anion.
Cation is the species that give electron and attain positive charge while anion is a species which gain electron and attains negative charge so when anion and cation combine in fixed ration the the overall charge of the molecule is zero that is molecule is neutral.
Out of given structural is a 3D representation of any chemical formula, in which symbol of each element is shown .Along with symbol line for each bond between atoms is also shown.
Therefore, the correct option is option A.
To learn more about Chemical formula, here:
https://brainly.com/question/28522480
#SPJ2
Which of these affects the motion of an object
A. the position of nearby objects
B. the force acting on the object
C the object's length
D. the age of the object
Answer:
B
Explanation:
If an object is acted upon by another force this will cause it to change the direction and velocity of where it is going.
a 55g block of metal has a specific heat of 0.45 J/g°C. What will be the temperature change of this metal if 450 J of heat energy are added
Answer:
Change in temperature (Δt) = 18.18°C (Approx.)
Explanation:
Given:
Mass of metal block (M) = 55g
Specific heat of metal (c) = 0.45 J/g°C
Amount of energy added (Q) = 450 J
Find:
Change in temperature (Δt)
Computation:
Using Specific Heat Energy formula
Q = McΔt
450 = (55)(0.45)(Δt)
450 = (24.75)(Δt)
Change in temperature (Δt) = 450 / 24.75
Change in temperature (Δt) = 18.18°C (Approx.)
What kind of intermolecular forces act between a nitrogen trichloride molecule and a hydrogen sulfide molecule
Answer:
Dipole induced dipole force of attraction.
Explanation:
This is because dipole induced dipole attraction is a weak force of attraction or london force that occur when a polar molecule causes a form induction in a dipole in an atom or in a nonpolar molecule by altering the arrangement non polar electrons.
When 3.52 g of bismuth oxide (molar mass - 465.96 g/ml) reacts with excess carbon to form 2.91 g of bismuth metal (molar mass-208.98) according to the equation:
Bi2O3(s) + 3C(s) = 2 Bi(s) + 3 CO(g)
24
What is the percent yield of the reaction?
(Answer to 1 decimal place)
25
help me to solve this
Answer: The average atomic mass of nitrogen is 14.0066 amu
Explanation:
Mass of isotope N-14 = 14.00307 amu
% abundance of isotope N-14= 99.64% = [tex]\frac{99.64}{100}[/tex]
Mass of isotope N-13 = 15.0001 amu
% abundance of isotope N-13= (0.36)% = [tex]\frac{0.36}{100}[/tex]
Formula used for average atomic mass of an element :
[tex]\text{ Average atomic mass of an element}=\sum(\text{atomic mass of an isotopes}\times {{\text { fractional abundance}})[/tex]
[tex]A=\sum[(14.00307)\times \frac{99.64}{100})+(15.0001)\times \frac{0.36}{100}]][/tex]
[tex]A=14.0066amu[/tex]
Therefore, the average atomic mass of nitrogen is 14.0066 amu
how many grams of Na2SO4, (molar mass =142.0 g/mol) are there in 15 mL of 0.50 m Na2SO4 solution?
Answer:
1.1 g Na2SO4
Explanation:
First convert mL to L. Then multiply by the Molarity to get moles, then multiply by the molar mass to get grams.
15 mL x 1 L x 0.50 mol Na2SO4 x 142 g = 1.1 g
10^3 mL 1 L mol Na2SO4
In a formula unit, there are 48 gram of Na2SO4 atoms of each element. In terms of molar mass (gram mass unit): 45.98 g Na2SO4 in total 142.04 g sodium sulphate
How many moles of Na2SO4 are there?A mole of sodium sulphate is created when two moles of sodium (45.98 g), one mole of sulphur (32.06 g), and four moles of oxygen (64.00 g) are combined (142.04 g).
The atomic mass of sodium sulphite is equal to 10 moles times the molecular mass, or 1260 grams. Consequently, 1260 grams are the mass of 10 moles of sodium sulphite (Na2SO4).
We first obtain the atomic weights of the different elements in a periodic table in order to compute the molar mass of a molecule. Then, we multiply the total number of atoms by each one's atomic mass. Finally, we calculate the molar mass by combining all the atomic masses.
To learn more about Na2SO4 refer to:
https://brainly.com/question/3047839
#SPJ2
3 attempts left
Check my work
Enter your answer in the provided box.
The pressure inside a 1.0 L balloon at 25°C was 750 mm Hg. What is the pressure (in mmHg) inside the
balloon when it is cooled to -65°C and expands to 3.3 L in volume?
mm Hg
Answer:
shhsss×<×>×××<××××
Explanation:
4×738×8<#329×
Franklin was performing an experiment by combining hydrochloric acid and sodium hydroxide. He measured the mass of his reactant materials to be 35g. The reaction resulted in the production of salt and water. He reported that his products weighed 32g. Which best describes the results of Franklin’s experiment? No error occurred, some of the products are always lost as heat. An error occurred, the mass of the reactants should equal the mass of the products. An error occurred, the products should weigh more than the reactants. No error occurred, water is not weighed when determining the weight of the products.
Answer:
B) an error occurred, the mass of the reactants should equal the mass of the products.
Explanation:
The answer choices are:
A) no error occurred, some of the products are always lost as heat.
B) an error occurred, the mass of the reactants should equal the mass of the products.
C) an error occurred, the products should weigh more than the reactants.
D) no error occurred, water is not weighed when determining the weight of the products.
SolutionThe basis to answer this question is the law of conservation of mass.
Any chemical reaction satisfies the law of conservation of mass: mass cannot be either created nor destroyed, so, always, the mass of the reactants equal the mass of the products.
Thus, since he measured the mass of his reactant materials to be 35g and he reported that his products weighed 32g, his data are in clear contradiction of the law of conservation of mass. So, there is an error in his results: the mass of the reactants should equal the mass of the products.
An error occurred, the mass of the reactants should equal the mass of the products according to law of conservation of mass for the given experiment. Therefore, the correct option is option B.
The mass of the reactants and products in a chemical reaction should be equal, in accordance with the law of conservation of mass. This implies that there is no net change in mass during the chemical process. The mass of the reactants and products in a chemical reaction should be equal, in accordance with the law of conservation of mass. This implies that there is no net change in mass during the chemical process.
Franklin determined the mass of the reactant components in this instance to be 35g, and the products of the reaction weighed 32g. An error occurred because the mass of the reactants should equal the mass of the products, but the mass of the products is less than the mass of the reactants.
Therefore, the correct option is option B.
To know more about law of conservation of mass, here:
https://brainly.com/question/28711001
#SPJ7
What is the final volume of a 3.5M NaOH solution if the original solution was 20mL of a 7.00M NaOH solution
Answer:
0.04 L (or 40 mL)
Explanation:
The dilution equation is: [tex]M_{s} V_{s} = M_{d} V_{d}[/tex]
[tex]M_{s}[/tex] = the molarity of the sock solution
[tex]V_{s}[/tex] = the volume of the sock solution
[tex]M_{d}[/tex] = the molarity of the diluted solution
[tex]V_{d}[/tex] = the volume of the diluted solution
We are given the original, or stock, solution, which is [tex]M_{s} = 7.00 M NaOH[/tex], and [tex]V_{s} = 0.02 L (20 mL)[/tex]. We are also given the final molarity, which is: [tex]M_{d} = 3.5 M NaOH[/tex].
So, plugging our given into the dilution equation, results in:
[tex]7.00 M * 0.02 L = 3.5M * V_{d}[/tex] (divide both sides by 3.5 M, in order to get [tex]V_{d}[/tex] by itself).
[tex]\frac{7.00 M * 0.02 L}{3.5M} = V_{d}[/tex]
[tex]V_{d} = 0.04 L (or 40 mL)[/tex]
So, the final volume of a 3.5 M NaOH solution, with an original solution of 20 mL of a 7.00 M NaOH solution, is 0.04 L (or 40 mL)
Hopefully this helped. Good luck!
HELP PLZ
Carbon readily makes these bonds with other elements, primarily..?
Explanation:
Carbon has the ability to form long chains of carbon atoms as well as ringed compounds by continuously bonding to itself. This covalent bonds may be single, double, or triple. Carbon forms covalent bonds easily with other elements, especially hydrogen, oxygen, nitrogen, halogens, and a variety of nonmetals.
Phosphorus reacts with oxygen to produce different kinds
of oxides. One of these oxides is formed when 1.347 g of
phosphorus reacts with 1.744 g of oxygen. What is the
simplest formula of this oxide?
Answer:
check below
Explanation:
You can find the empirical formula of phosphorus oxide
P O
____ ____
1.347g 1.744
1.347/ 31 1.744/ 16
0.043 0.109
0.043/ 0.043 0.109/ 0.043
1 : 2.5
2 : 5
P2O5
1120 KG car is traveling with a speed of 40 M/S find its energy
Answer:
252 Joules
Explanation:
I thin k this is right, im so sorry if not!! :)
Name 3 ways you can keep our community healthy?
Answer:
1. Practice healthy habits with kids in your life. ...
2. Engage in your school's efforts to encourage healthy practices. ...
3. Learn more about the decisions local officials are making that impact your environment. ...
4. Give back healthy options to your community.
Explanation:
Determine the molar mass of a compound that has a density of 1.25 g/L at
STP. *
*
Answer:
So, weight per litre (1.25g/l) times 22.4 l/mole equals the mole weight (28 g/mole).
A gas has a volume of 0.50 L, a pressure of 0.5 atm, and a temperature of 40°C. What will be the new temperature if the gas is expanded to 5.0 L and a pressure of 0.10 atm?
Answer:
4.90
Explanation:
10- 5.0
a shape with five sides is called a?
Answer:
A five-sided shape is called a pentagon.
Explanation:
Answered by NONE other than the ONE & ONLY #QUEEN herself aka #DRIPPQUEENMO!!!
Hope this helped!!!
Answer:
a pentagon
Explanation:
I remember that a pentagon has 5 sides
What is the total number of atoms in ammonium hydroxide?
I will give Brainliest! :)
Answer:Ammonia is a compound that contains one nitrogen atom and three hydrogen atoms. Ordinarily having a characteristic of a pungent and gaseous compound.
Elemet: Hydrogen, Symbol: H, # of Atoms:5
Elemet:Nitrogen, Symbol: N, # of Atoms:1
Elemet:Oxygen, Symbol: O, #of Atoms:1
Explanation:
The number of atoms presennt in one mole of ammonium hydroxide is 6.02 * 10^23 atoms.
What is the mole?The mole refers to the amount of a substance that can be used as a reference. According to Avogadro, one mole of a substance contains 6.02 * 10^23 atoms, molecules, ions etc.
In that case, we can say that the number of atoms presennt in one mole of ammonium hydroxide is 6.02 * 10^23 atoms.
Learn more about mole: https://brainly.com/question/3393755?
Use the Lewis model to determine the formula for the compound that forms from each pair of atoms.
Express your answer as a chemical formula.
1) K and I
2) Mg and F
Answer:
[tex]KI\\\\MgF_2[/tex]
Explanation:
Hello there!
In this case, since the Lewis dot structures are able to show the number bonds, required atoms and valence electrons of each bonding species, it is necessary to keep in mind that potassium has one valence electron, iodine has seven, magnesium has two and fluorine has seven; therefore, we can infer that the compound KI has one bond whereby iodine is able to attain the octet and the compound MgF needs two fluoride ions to fill out those two valence electrons of magnesium to obtain MgF₂, since the Lewis structures are:
[tex]K-I\\\\F-Mg-F[/tex]
Therefore, the chemical formulas are just:
[tex]KI\\\\MgF_2[/tex]
Best regards!