Answer:
8.8
Explanation:
You can view more details on each measurement unit: molecular weight of Aluminum or grams The molecular formula for Aluminum is Al. The SI base unit for the amount of substance is the mole. 1 mole is equal to 1 mole of Aluminum.
What will the nervous system feedback do when the human body's temperature drops just below its normal range? Plssss help
Answer:
Homeostasis
Explanation:
The blood vessels constrict and you start to shiver, that shivering generates heat to warm the body to help to body temperature go back to normal. Homeostasis is the condition of keeping your body at a normal condition.
What is to dissolve?
Answer:
(with reference to a solid) become or cause to become incorporated into a liquid so as to form a solution.
Why is methanol written as ch3oh instead of ch4o?
Answer: Here comes the role of another formula, which we refer to as the structural formula and that is CH3OH for methanol. The structural formula gives us an additional information that carbon is attached to three hydrogen atoms and one oxygen atom.
Can you identify what object is being represented by the model on the right? gear clock battery
Answer:gear
Explanation:just did it right now
Answer: Gear
Explanation: just did it on Edge 2021
Balance the following chemical equation by providing the correct coefficients.
[ ]Na+[ ]H2O -> [ ] NaOH + [ ]H2
Answer:
[2 ]Na+[2 ]H2O -> [ 2] NaOH + [1]H2
What is the pH of a 0.30 M solution of Ca(OH)2?
Explanation:
30 to the second power
1. Take 2-3 crystals of potassium permanganate and dissolve them in 100 mL of water.
2. Take out approximately 10 mL of this solution and put it into 90 mL of clear water.
3. Take out 10 mL of this solution and put it into another 90 mL of clear water.
4. Keep diluting the solution like this 5 to 8 times.
5. Is the water still coloured?
Answer:
2
Explanation:
1. Take 2-3 crystals of potassium permanganate and dissolve them in 100 mL of water.
2. Take out approximately 10 mL of this solution and put it into 90 mL of clear water.
3. Take out 10 mL of this solution and put it into another 90 mL of clear water.
4. Keep diluting the solution like this 5 to 8 times.
5. Is the water still coloured?
What effect does the addition of a catalyst have on a chemical reaction at equilibrium?
A.
It increases the rate of the forward reaction, only.
B.
It increases the rate of the reverse reaction, only.
C.
It increases the rate of both the forward and reverse reactions.
D.
It decreases the rate of both the forward and reverse reactions.
Answer:
C
Explanation:
In the presence of a catalyst, both the forward and reverse reaction rates will speed up equally. :)
The formula of a compound is M(OH)2 . Given that the Mr of compound is 98 , calculate Ar of M. (Ar of O = 16 , H = 1 ) WITH WOKING OUT
Answer:
The atomic weight Ar, of M is 64
Explanation:
The formula of the given compound is M(OH)₂
Mr, is the molecular weight of a compound and for the given compound, Mr is equal to 98.
Ar, is the atomic weight of the elements in the compound
The molecular weight, Mrof a compound is the mass of one mole mole of that compound. It can be obtained by summing the atomic masses of all elements in that compound. For elements that has more than one atom in the compound, the atomic weight of that element is multiplied by the number of atoms of the element present in the compound and then the sum of the weight of each element gives the molecular weight of the compound.
Onnthe compound above,the atomic weight of the unknown element M, is to be obtained.
Ar of the other elements inn he compound is given : Ar of O = 16, Ar of H = 1.
Molecular weight of the compound, Mr = 98
Calculating for the Ar of M:
(M × 1) + (16 × 2) + (1 × 2) = 98
M +32 + 2 = 98
M + 34 = 98
M = 98 -34
M = 64
Therefore, the atomic weight Ar, of M is 64
Given the reaction: 4 NH3(g) + 5 O2(g) → 4 NO (g) + 6 H2O When 1.20 mole of ammonia reacts, how many moles of water are produced?
Answer:
When 1.20 mole of ammonia reacts, 1.8 moles of water are produced.
Explanation:
The balanced reaction is:
4 NH₃(g) + 5 O₂(g) → 4 NO (g) + 6 H₂O
By stoichiometry of the reaction, the following amounts of moles participate in the reaction:
NH₃: 4 moles O₂: 5 molesNO: 4 molesH₂O: 6 molesThen you can apply the following rule of three: if by stoichiometry 4 moles of ammonia produce 6 moles of water, 1.2 moles of ammonia will produce how many moles of water?
[tex]moles of water=\frac{1.2 moles of ammonia*6 moles of water}{4 moles of ammonia}[/tex]
moles of water= 1.8 moles
When 1.20 mole of ammonia reacts, 1.8 moles of water are produced.
differentiate between a promoter and an inhibitor
Promoters are substances that increase the catalytic activity, even though they are not catalysts by themselves.
Inhibitors are sometimes referred to as "negative catalysts" since they decrease the reaction rate.
molecular formula of CH2O, 120 g/mol
7. A certain hydrocarbon, CxHy, is burned (reacts with O2 gas) and produces 1.955 g of CO2 for every
1.000 g of H20. What is the empirical formula of this hydrocarbon?
CxHy + (X + y/4) O2 -> xCO2 + y/2 H2O
Answer:
The empirical formula of the hydrocarbon is C₂H₅
Explanation:
The formula for the hydrocarbon is [tex]C_xH_y[/tex]
The mass of CO₂ produced per 1,000 g of H₂O = 1,955 g
The equation for the chemical reaction is given as follows;
[tex]C_xH_y[/tex] + (x + y/4) O₂ → XCO₂ + y/2H₂O
From the given chemical equation, counting the number of atoms on both sides of the equation, we have;
The molar mass of CO₂ = 44.01 g/mol
The molar mass of H₂O = 18.01528 g/mol
The number of moles of H₂O in 1,000 g of H₂O = 1,000 g/(18.01528 g/mol) = 55.5084351 moles
The number of moles of CO₂ in 1,955 g of H₂O = 1,955 g/(44.01 g/mol) = 44.4217223 moles
Therefore, given that X moles of CO₂ is produced alongside Y/2 moles of H₂O. we have;
X = 44.4217223, Y/2 = 55.5084351
∴ Y = 2 × 55.5084351 = 111.0168702
The ratio of X to Y = X/Y = 44.4217223/111.0168702 = 0.40013488238
∴ The ratio of X to Y = X/Y ≈ 0.4 = 4/10
X/Y ≈ 4/10
The empirical formula is the representation of molecular formula in the smallest whole number ratio of the elements of the molecules
Therefore, when X = 4, Y = 10, from which we have the smallest ratio as;
When X = 2, Y = 5
The empirical formula of the hydrocarbon is therefore, [tex]C_xH_y[/tex] = C₂H₅
The given chemical equation becomes;
C₂H₅ + (2 + 5/4) O₂ → 2CO₂ + 5/2H₂O
C₂H₅ + 3.25 O₂ → 2CO₂ + 2.5 H₂O
We then have;
4C₂H₅ + 13 O₂ → 8CO₂ + 10 H₂O
The empirical formula of the hydrocarbon, [tex]C_xH_y[/tex] = C₂H₅.
Calculate the volume in mL of 53.2 g of .251M solution of HCl.
Show work please
Answer:
5.813 mL
Explanation:
You need to use the formula : vol = mass / molar mass x molarity
the molar mass of HCl is 36.46 and the problem gives you the rest of the equation
0.251M x 36.46 = 9.151
53.2g / 9.151 = 5.813 mL
*I don't know some of the units so that's why some of them are blank sorry
*I'm also sorry if this is wrong but it's what I did so..
Why might the ability to produce three-dimensional images of organs be helpful in diagnosing a patient's ailment?
Answer:
Explanation: The body is largely composed of water molecules. Each water molecule has two hydrogen nuclei or protons. MRI takes advantage of the high prevalence of hydrogen in the body and the magnetic properties of the proton in a hydrogen atom. Hydrogen atoms induce a small magnetic field due to the spin of this atom's proton.
Balance the following skeletal equation:
Li(s) + H2O(1) -------> -------> LiOH(aq) + H2(g).
Answer:
I think above answer is fully correct. Mark it brainliest
i need help in this can someone help
Answer:
the limiting reagent is butane
Explanation:
5C₄H₁₀ + 25O₂ → 20CO₂ + 5H₂0
For the night yet balanced equation, No + CuCl2 —> Cu + NiCl3, if you started with 12.00 g of nickel and 42.00 g of CuCl2, how much Copper would you expect to produce Perdue
Answer:
19.45g of Cu are expect to be produced
Explanation:
Based on the reaction:
2Ni + 3CuCl2 → 3Cu + 2NiCl3
2 moles of Ni react with 3 moles of CuCl2 to produce 3 moles of Cu
To solve this question we must find the moles of each reactant in order to find the limiting reactant. With the limiting reactant we can find the moles of Cu produced and the mass as follows:
Moles Ni -Molar mass: 58.6934g/mol-
12.00g * (1mol / 58.6934g) = 0.204 moles Ni
Moles CuCl2 -Molar mass: 134.45g/mol-
42.00g * (1mol / 134.45g) = 0.312 moles CuCl2
For a complete reaction of 0.204 moles of Ni are required:
0.204 moles Ni * (3 moles CuCl2 / 2 moles Ni) = 0.306 moles of CuCl2
As there are 0.312 moles, CuCl2 is the excess reactant and Ni is limiting reactant.
Moles Cu:
0.204 moles Ni * (3moles Cu / 2 moles Ni) = 0.306 moles of Cu are produced
Mass Cu:
0.306 moles of Cu * (63.546g / mol) =
19.45g of Cu are expect to be producedSlow cooling of magma leads to the formation of large crystals, such as halite and calcite.
Select the correct response:
True
False
Sarah is running a race and is almost to the finish line. In the last 5 seconds, her velocity changes from 2m/s to 4m/s. What is her average acceleration during the last 5 seconds of the race?
Answer:
[tex]\boxed {\boxed {\sf a= \frac {2}{5} \ or \ 0.4 \ m/s^2}}[/tex]
Explanation:
Acceleration is found by dividing the change in velocity by the time. The formula is:
[tex]a= \frac {v_f-v_i}{t}[/tex]
where [tex]v_f[/tex] is the final velocity, [tex]v_i[/tex] is the initial or starting velocity, and [tex]t[/tex] is the time.
Her velocity changes from 2 meters per second to 4 meters per second in the 5 seconds. Therefore:
[tex]v_f= 4 \ m/s \\v_i= 2 \ m/s \\t=5 \ s[/tex]
Substitute the values into the formula.
[tex]a= \frac { 4 \ m/s- 2 \ m/s}{5 \ s}[/tex]
Solve the numerator and subtract.
[tex]a= \frac { 2 \ m/s}{5 \ s}[/tex]
Divide.
[tex]a= \frac{2}{5} \ m/s/s= \frac{2}{5} \ m/s^2[/tex]
This can also be written as a decimal.
[tex]a=0.4 \ m/s^2[/tex]
Her average acceleration during the last 5 seconds of the race is 2/5 or 0.4 meters per square second.
Answer:
Solution :-Here
Initial velocity = 2 m/s
Final velocity = 4 m/s
Time = 5 sec
v = u + at
4 = 2 + a(5)
4 - 2 = a(5)
2 = 5a
2/5 = a
Hence, acceleration is 2/5 m/s²
If a 28.0 L balloon with a temperature of
25 °C is cooled in a refrigerator, what will
be the volume of the balloon be when it
reaches 5 °C?
Answer:
5.6 L
Explanation:
We can apply Charles' Law here since our pressure is constant (will not change inside the refrigerator) and we are relating change in volume with change in temperature:
V₁ / T₁ = V₂ / T₂ where V₁ and T₁ are initial volume and temperature, and V₂ and T₂ are final volume and temperature. Let's plug in what we know and solve for the unknown:
28.0 L / 25 °C = V₂ / 5 °C => V₂ = 5.6 L
5.6 L is our new volume (at 5 °C).
In the compound AbO3, the ratio of aluminum to
oxygen is
A) 3 moles of aluminum to 2 moles of oxygen
B) 2 moles of aluminum to 3 moles of oxygen
C) 2 grams of aluminum to 3 grams of oxygen
D) 3 grams of aluminum to 2 grams of oxygen
Answer:
c
Explanation:i got it right ony my test
What is the empirical formula for H2SO4? Explain.
Answer: The empirical formula is H2SO4 only.
Explanation: Because it is the simplest ratio of atoms of elements in a compound.
How many grams of H2O would be made from 7.9 moles of H2? (Round to one decimal place)
Answer:
2.01588 grams
Explanation:
How many grams are in 5 mole of carbon dioxide? (CO2)
plz include your work
Answer: Hence, mass of CO2 is 22g.
Explanation: N/A
Answer:
mole=mass/RMM
5mole =mass/44
mass= 44×5=220grams
Explanation:
Co2 molecular weight =44 ,cross multiply then you get your mass.
How many liters of O2 would be needed to produce 5.75 moles of K₂O?
Answer:
just 1
Explanation:
Increase the coefficient for NH3. Look at
the balance labeled "H" (for hydrogen).
Why are there now 3 hydrogen atoms on
the right side of the balance but 0 on the
left side?
Answer:
I don't know please you tell me just joking
Describe the energy in nuclear fuel and the way in which it’s converted to electrical energy. Write 50 to 100 words.
Explanation:
You will have to rewrite this in your own words please. Download the app Paraphrase and also download Plagiarism Checker. Go on Paraphrase first and write it out then go to Plagiarism second and it'll tell you if you still need to reword it.
Answer:
A nuclear reactor produces electricity in much the same way other power plants do. The chain reaction produces the energy, which turns water into steam. The pressure of the steam turns a generator, which produces electricity.
Explanation:
Nuclear energy originates from the splitting of uranium atoms a process called fission. In nuclear fission, atoms are split apart to form smaller atoms, releasing energy. Fission takes place inside the reactor of a nuclear power plant. At the center of the reactor is the core, which contains uranium fuel. The uranium fuel is formed into ceramic pellets. Inside each uranium fuel pellet, there are millions of uranium nuclei. When these nuclei are split, a huge amount of energy is released. Some of this energy is from radiation, but the biggest source is kinetic energy. This is the energy that produces heat inside a reactor. The heat produced during nuclear fission in the reactor core is used to boil water into steam, which turns the blades of a steam turbine. As the turbine blades turn, they drive generators that make electricity. Nuclear plants cool the steam back into water in a separate structure at the power plant called a cooling tower, or they use water from ponds, rivers, or the ocean. The cooled water is then reused to produce steam.
What is the total number of grams of HI in 0.500 liter of
1.00 M HI?
64.0 g
128 g
1.00 g
0.500 g
Answer:
The amount of HI is "64 grams".
Explanation:
The given values are:
Volume,
= 0.500 L
Molarity,
= 1.00 H
Molar mass of HI,
= 128
Now,
The moles of HI will be:
= [tex]Molarity\times Volume[/tex]
On substituting the values, we get
= [tex]1.00\times 0.500[/tex]
= [tex]0.5 \ mol[/tex]
hence,
The amount of HI will be:
= [tex]Moles\times Molar \ mass[/tex]
= [tex]0.5\times 128[/tex]
= [tex]64 \ grams[/tex]
A single atom of an element has 11 protons, 11 electrons, and 12 neutrons. Which element is it?
OV
Na
Mg
Se
Save and Frit
Answer:
Na
Explanation:
Sodium