how many grams of nabr are dissolved in 300 ml of 2.0 m nabr solution? report your answer to the hundredths place, not including units when you type your answer in the provided space.

1) 5.1167 x 10²⁴atoms of chlorine. 2) 248.00 g. 3) 4.8825 x 10⁷ moles of helium. 4) 2.7757 x 10²⁴ atoms of sulfur.  5) Molar mass of Co (cobalt) is 58.93 g/mol.  6) Formula mass =  310.18 g/mol.

Sum of the atomic masses of all the atoms in chemical formula is called formula mass

1.)  Number of atoms = 8.500 moles x 6.022 x 10²³ atoms/mole = 5.1167 x 10²⁴ atoms of chlorine.

2.) Molar mass of oxygen is 16.00 g/mol. Therefore:

Mass of 15.50 moles of oxygen = 15.50 moles x 16.00 g/mol = 248.00 g.

3.) Molar mass of helium is 4.00 g/mol. Therefore, the number of moles of helium in 1.953 x 10⁸ g is:

Number of moles = 1.953 x 10⁸ g / 4.00 g/mol = 4.8825 x 10⁷ moles of helium.

4.) Molar mass of sulfur is 32.06 g/mol. Therefore, the number of moles of sulfur in 147.82 g is:

Number of moles = 147.82 g / 32.06 g/mol = 4.6084 moles of sulfur.

To find the number of atoms, we can use Avogadro's number again:

Number of atoms = 4.6084 moles x 6.022 x 10²³ atoms/mole = 2.7757 x 10²⁴ atoms of sulfur.

5.) Molar mass of Co (cobalt) is 58.93 g/mol.

6.) Ca₃(PO₄)₂ contains 3 calcium atoms, 2 phosphorus atoms, and 8 oxygen atoms.

Atomic masses of these elements are:

Calcium (Ca) = 40.08 g/mol

Phosphorus (P) = 30.97 g/mol

Oxygen (O) = 16.00 g/mol

Therefore, formula mass of Ca₃(PO₄)₂ is:

Formula mass = (3 x 40.08 g/mol) + (2 x 30.97 g/mol) + (8 x 16.00 g/mol)

= 120.24 g/mol + 61.94 g/mol + 128.00 g/mol

= 310.18 g/mol.

To know more about formula mass, refer

https://brainly.com/question/21334167

#SPJ1

The molecules at the surface of a liquid can enter the vapor phase only if group of their energy is the high enough to the overcome the attractive forces are in the liquid.

When the any liquid is heated, the molecules will obtain the sufficient amount of the kinetic energy to overcome the forces that will be holding them in the liquid and it will escape into the gaseous phase. Therefore, they will generate the population of the molecules in the vapor phase and which is above the liquid and it is produces the pressure that is the vapor pressure of the liquid.

For the molecules into the vapor phase, and it will have the enough kinetic energy that is to overcome the intermolecular forces of the other molecules at the surface of the liquid.

To learn more about vapor phase here

https://brainly.com/question/30504942

#SPJ4

When lactic acid accumulates, the compensatory mechanism initially triggered to maintain acid-base balance is the respiratory system. It increases the rate and depth of breathing to eliminate more carbon dioxide, which helps reduce acidity and restore pH balance in the body.

As lactic acid accumulates, the compensatory mechanism that is initially triggered to maintain acid-base balance is increased ventilation or hyperventilation. This is because the increased ventilation leads to a decrease in carbon dioxide (CO2) levels in the blood, which helps to offset the acidic effects of lactic acid accumulation. This is a temporary compensatory mechanism, however, as the body will eventually need to eliminate the excess lactic acid through other means such as metabolism and excretion.

Learn more about lactic acid here: brainly.com/question/24976306

#SPJ11

Perfect gas particles move in straight lines and have no size, among other characteristics. The right answer is D) a gas made up of tiny, nonpolar molecules.

The gas particle's volume is quite small. There are no intermolecular forces between the gas particles, which are all the same size. Newton's Laws of Motion are consistent with the random motion of the gas particles. Perfect elastic collisions occur between gas particle without any energy being lost.

The particles of a real gas have limited volumes and are attracted to one another, whereas the particles of an ideal gas are considered to have no volume and no interparticle attraction.

To know more about gas particles visit:-

https://brainly.com/question/14932426

#SPJ1

Explanation:

Moles in the 20 ml  

   .020 L   *   1.5  moles/L = .03 moles

now in 50 ml   (which is  .05 liters )

      .03 moles / .05 L   = .6 m

True. The standard conditions for measuring thermodynamic properties such as enthalpy, entropy, and Gibbs free energy are well-defined and standardized.

These conditions are used to compare and evaluate the relative stability and reactivity of different chemical species. The standard conditions for measuring these properties include a concentration of 1.0 m for soluble aqueous species, pure solids and liquids, and

a partial pressure of 1 atm for gaseous species. This means that the molar concentration of soluble aqueous species is set at 1.0 mol/L, and the pressure of gaseous species is set at 1 atm.

Pure solids and liquids are considered to have an activity of 1, which means that they do not affect the thermodynamic properties.

These conditions are used to determine the standard thermodynamic properties of chemical reactions, which are used to predict the direction and extent of chemical reactions.

To learn more about : standard

https://brainly.com/question/29136034

#SPJ11

Answer: (A) 1s

Explanation:

In changing the size of the zinc electrode would not impact the voltage of the cell.

If the size of the zinc electrode were doubled, the cell voltage would stay the same. This is because the voltage of a cell is dependent on the difference in potential between the two electrodes, not their size.

Doubling the size of the zinc electrode would not change the potential difference between the zinc and copper electrodes, therefore the cell voltage would remain constant.

The only factor that would affect the cell voltage would be a change in the concentration or temperature of the electrolyte solution or a change in the material or surface area of the copper electrode.

To learn more about : electrode

https://brainly.com/question/18251415

#SPJ11

If the temperature of water is increased, then it will change from a solid state (ice) to a liquid state, and then to a gaseous state.

A solid is one of the three basic states of matter, alongside liquid and gas. In a solid, the particles are tightly packed together and held in fixed positions by intermolecular forces. This gives solids a definite shape and volume that is maintained unless acted upon by an external force.

In a solid, the particles vibrate in place but do not move past one another. This is in contrast to a liquid, where the particles are more loosely packed and can move past one another, and a gas, where the particles are widely spaced and move freely in all directions.

Solids can be classified based on their physical properties, such as their hardness, density, and melting point. Some common examples of solids include metals, minerals, and various types of rock. Solids also play an important role in many areas of science and technology, from materials science and engineering to biology and medicine.

To know more about Solids visit :

https://brainly.com/question/17061172

#SPJ1

You would need to pipette 2.6 mL of stock solution to make a 1:5 dilution with a final volume of 13 mL.

To calculate this, first note that a 1:5 dilution means that for every 1 unit of stock solution, you need to add 4 units of solvent to make a total of 5 units. This can be expressed as a ratio of stock solution to solvent as 1:4. To find the amount of stock solution needed, you can use the following equation:

Plugging in the given values, we get:

Solving for the volume of stock solution, we get:

Therefore, you would need to pipette 2.6 mL of stock solution to make a 1:5 dilution with a final volume of 13 mL.

To learn more about final volume, here

https://brainly.com/question/2454734

#SPJ4

The one-step Wittig reaction is preferred over the two-step Grignard reaction for the conversion of aldehydes to alkenes due to its simplicity, higher yields, and fewer side reactions.

The change includes switching an aldehyde over completely to an alkene, which can be accomplished through a one-step Wittig response or a two-step Grignard response.

The one-step Wittig response includes responding the aldehyde with a Wittig reagent, which is a phosphonium ylide, within the sight of a base. The response delivers an alkene and a phosphine oxide as a result.

Then again, the two-step Grignard response includes the development of a Grignard reagent from an alkyl or aryl halide, trailed by the expansion of the subsequent Grignard reagent to the aldehyde to shape a liquor. The liquor is then got dried out to shape the ideal alkene.

As a general rule, the one-step Wittig response is liked over the two-step Grignard response for the transformation of aldehydes to alkenes since it is a less difficult and more straightforward interaction. The Wittig response additionally has better returns and less side responses contrasted with the Grignard response. In any case, the decision of response might rely upon the particular beginning material and the ideal item.

To learn more about Grignard reaction, refer:

https://brainly.com/question/15700490

#SPJ4

The transformation in question involves the conversion of a carbonyl compound (such as an aldehyde or ketone) to an alkene.

One method to achieve this transformation is through a one-step reaction called the Wittig reaction. In this method, a phosphorus ylide is used to transfer a carbonyl group to the ylide, forming an intermediate called an oxaphosphetane. This intermediate then undergoes an elimination reaction to give the desired alkene.

Another method to achieve this transformation is through a two-step reaction called the Grignard reaction. In this method, a Grignard reagent is first prepared by reacting an alkyl or aryl halide with magnesium in the presence of an ether solvent. This Grignard reagent can then react with a carbonyl compound to form an intermediate called an alkoxide. This intermediate can then undergo an elimination reaction to give the desired alkene.

The preferred route depends on several factors, such as the nature of the starting material, the desired product, and the availability of reagents. In general, the Wittig reaction is preferred for the conversion of aldehydes to alkenes, while the Grignard reaction is preferred for the conversion of ketones to alkenes. However, both methods can be useful in different situations and should be considered based on the specific requirements of the synthesis.

Learn more about carbonyl compound here: brainly.com/question/30850679

#SPJ11

Answer:

Explanation:

The above statement is true. Gases do not have a definite shape and volume as the intermolecular forces between the gas molecules is very weak and also the gas occupies the volume of the container stored

The sour mash used to make distilled spirits is blank is the liquid fermented grain that is collected from the previous batch.

The Sour mash or we can say that the  sourmash is the process that is used in the industry of the distilling which uses the material from the older batch of the mash and to start the fermentation for the new batch, the analogous to the make of the sourdough bread with the starter.

Therefore, the liquid fermented grain that is collected from the previous batch is the sour mash used to make the distilled spirits is blank.

To learn more about fermentation here

https://brainly.com/question/20662833

#SPJ4

When an ionic compound was dissolved in 250 mL of water and the temperature of the solution increased from 25°C to 42°C, the value of ΔH is lesser than zero and has a small magnitude and the value of ΔG is also lesser than zero.

When ionic compounds dissolve in water, the ions in the solid separate and disperse uniformly throughout the solution because water molecules surround and solvate the ions, reducing the strong electrostatic forces between them. This process represents a physical change known as dissociation.

In this there is increase in temperature which means that heat energy is released which makes the dissolution exothermic and thus it has ΔH negative. Since the reaction is feasible, the ΔG will be less than zero.

Learn more about Ionic compounds, here:

https://brainly.com/question/3222171

#SPJ1

The normality of acetic acid in the vinegar is 0.2919 N.

To determine the normality of acetic acid in the vinegar, you can follow these steps:

1. Write the balanced equation for the reaction:
  CH₃COOH (acetic acid) + NaOH → CH₃COONa + H₂O

2. Calculate the milliequivalents of NaOH used in the titration:
  Milliequivalents of NaOH = volume (mL) × normality
  Milliequivalents of NaOH = 34.80 mL × 0.4164 N
  Milliequivalents of NaOH = 14.49 meq (rounded to two decimal places)

3. Since the reaction is a 1:1 ratio, the milliequivalents of acetic acid will be equal to the milliequivalents of NaOH:
  Milliequivalents of acetic acid = 14.49 meq

4. Calculate the normality of acetic acid in the vinegar:
  Normality of acetic acid = milliequivalents of acetic acid/volume of vinegar (mL)
  Normality of acetic acid = 14.49 meq / 49.6 mL
  Normality of acetic acid = 0.2919 N (rounded to four decimal places)

So, the normality of acetic acid in the vinegar is 0.2919 N.

Learn more about normality at https://brainly.com/question/9754178

#SPJ11

Vinegar is an aqueous solution of acetic acid, ch3cooh. suppose you titrate a 49.6 ml sample of vinegar with 34.80 ml of a standardized 0.4164 n solution of NaOH. The normality of acetic acid in this vinegar is 0.292 N.

To find the normality of acetic acid in the vinegar, we can use the titration information provided. Here's a step-by-step explanation:
1. Write down the balanced chemical equation for the reaction between acetic acid (CH3COOH) and sodium hydroxide (NaOH):
  CH3COOH + NaOH → CH3COONa + H2O
2. Calculate the number of equivalents of NaOH used in the titration:
  Number of equivalents of NaOH = Volume of NaOH solution × Normality of NaOH solution
  Number of equivalents of NaOH = 34.80 mL × 0.4164 N
  (Note: Convert mL to L by dividing by 1000)
  Number of equivalents of NaOH = 0.03480 L × 0.4164 N = 0.0145 equivalents
3. Since the balanced equation shows a 1:1 ratio between acetic acid and NaOH, the number of equivalents of acetic acid in the vinegar is equal to the number of equivalents of NaOH used in the titration.
4. Calculate the normality of acetic acid in the vinegar:
  Normality of acetic acid = Number of equivalents of acetic acid / Volume of vinegar sample
  Normality of acetic acid = 0.0145 equivalents / 0.0496 L = 0.292 N
So, the normality of acetic acid in the vinegar is 0.292 N.

To learn more about titration, refer:-

https://brainly.com/question/31271061

#SPJ11

A proflavine molecule absorbs one mole of blue light at 470 nm, which has an energy content of about 25.4 kJ.

A photon is a microscopic particle made up of electromagnetic radiation waves. Maxwell demonstrated that photons are merely electric fields moving through space. Photons move at the speed of light and have no charge or rest mass.

We can calculate by using the following formula:

E = hc/λ

E = energy of the photon

h = Planck's constant (6.626 × 10^-34 J·s)

c = speed of light (2.998 × 10^8 m/s)

λ = wavelength of the light

We have to multiply the energy per photon by Avogadro's number (6.022 × 10^23 photons/mol).

we have to convert the 470 nm to meters:

λ = 470 nm × (1 m/10^9 nm) = 4.70 × 10^-7 m

We calculate the energy per photon,

E = hc/λ

E = (6.626 × 10^-34 J·s) × (2.998 × 10^8 m/s) / (4.70 × 10^-7 m)

E = 4.21 × 10^-19 J

Now:

E = (4.21 × 10^-19 J/photon) × (6.022 × 10^23 photons/mol) / 1000 J/kJ = 25.4 kJ/mol

To know more about the photons visit:

https://brainly.com/question/9614066

#SPJ1

Answer:

A

Explanation:

M.G has no cure. it's an autoimmune disease that affects communication between nervous and the muscles.

We separate porridge from cooked rice using a strainer or a sieve.

Porridge and cooked rice are both similar in texture and appearance, making it difficult to separate them. One way to do it is to use a strainer or a colander with small holes. Pour the mixture of porridge and rice into the strainer or colander and let the liquid portion drain out. You can also use a cheesecloth or a muslin cloth to squeeze out the liquid while retaining the rice grains.

Another method is to use a spoon to scoop out the rice from the top, leaving the porridge at the bottom. However, this method may not be as effective as the others. Regardless of the method you choose, it is important to be gentle and patient to avoid breaking the rice grains and mixing them with the porridge.

To know more about porridge, here

https://brainly.com/question/30859396

#SPJ4

When handling the sodium hydroxide solution in this experiment, a safety concern would be to wear lab gloves to protect your skin from the corrosive effects of the hydroxide. Additionally, it is important to use the solution in a fume hood to minimize exposure to harmful vapors.

The safety concern when handling the sodium hydroxide solution used in this experiment would be to wear lab gloves.Sodium hydroxide is a strong base that can cause chemical burns and skin irritation upon contact. It can also cause eye damage and respiratory irritation if inhaled. Therefore, it is important to handle it with care and take proper precautions to avoid any accidents or injuries.Wearing lab gloves is one of the important safety measures when handling sodium hydroxide solution. Lab gloves provide a barrier between the skin and the chemical, reducing the risk of skin irritation or burns. Gloves made of nitrile, neoprene, or other chemical-resistant materials are recommended for handling sodium hydroxide solution.While it is also important to keep sodium hydroxide solution away from open flames and only use it in a fume hood to avoid inhalation of fumes, these precautions are not the primary safety concern when handling the chemical. The most important safety measure is to wear appropriate personal protective equipment, such as lab gloves, to protect against contact with the chemical.

Learn more about hydroxide here

https://brainly.com/question/4251554

#SPJ11

The correct answer to your question is option 2, which states that a dissolution process is exothermic if the amount of energy released in bringing about solute-solute interactions is greater than the sum of the amounts of energy absorbed in overcoming crystal lattice and solvent-solvent interactions.

To understand this concept better, we need to understand what happens during the dissolution process. When a solute dissolves in a solvent, the solute particles break away from their crystal lattice structure and mix with the solvent particles. This process involves overcoming the attractive forces between the solute particles (solute-solute interactions) and the attractive forces between the solvent particles (solvent-solvent interactions). At the same time, energy is released when the solute particles interact with the solvent particles (solvent-solute interactions).
In an exothermic dissolution process, the energy released due to solvent-solute interactions is greater than the energy required to overcome the crystal lattice and solvent-solvent interactions. This means that more energy is released than absorbed, resulting in a net release of heat. This is because the attractive forces between the solute and solvent particles are stronger than the forces holding the solute particles in their crystal lattice structure.
Overall, the exothermic nature of a dissolution process depends on the balance between the energy released and absorbed during the process. By understanding the interactions between solute and solvent particles, we can predict whether a dissolution process will be exothermic or endothermic.

For more information on crystal lattice see:

https://brainly.com/question/10281663

#SPJ11

Answer:

the answer is D. the molecules of a gas are small compared to the distance between them

Explanation:

The postulates of Kinetic-Molecular Theory are as follows:

The molecules of a gas move rapidly, constantly, and in straight lines.

The average kinetic energy of the molecules of a gas is directly proportional to the Kelvin temperature.

A gas exerts pressure because the gas molecules repel each other.

The molecules of a gas are small compared to the distance between them1.

Therefore, “the molecules of a gas are small compared to the distance between them” is not a postulate of Kinetic-Molecular Theory

When building a bridge in South America, it is important to consider the climate and terrain of the region. The company should research the area and use the most appropriate materials for the task.

Materials are substances or resources that are used to create or make something else. Examples of materials include plastics, metals, fabrics, and paper. Materials are used in the manufacturing of products, such as food, clothing, furniture, and electronics. Materials can also be found in nature, including wood, stone, and minerals. They are also used in the construction of buildings, bridges, and other structures.

For example, they should use steel or reinforced concrete to build the bridge, as these materials are highly durable in wet, humid climates. Additionally, they should make sure to use corrosion-resistant fasteners and coatings to prevent rusting. The company should also consider the seismic activity in the region when designing the bridge, as earthquakes can cause significant structural damage. They should make sure to use seismic-resistant designs and materials, such as flexible joints, to help reduce the risk of damage. Lastly, the company should include guardrails and other safety features on the bridge, as it will be traversed by both pedestrians and vehicles.

To learn more about materials

https://brainly.com/question/16185625

#SPJ1

The new volume of the gas with 1.90 L of gas are heated from 25.00°C to 95.00°C. If the pressure remains constant, is 72.2L.

According to Charles Law the formula given here is V1/T1=V2/T2

Substituting the values in the equation we get

1.9/25=V2/ 95

V2= 1.9× 95/25

V2= 72.2 L

The experimental gas law known as Charles's law outlines how gases have a tendency to expand when heated. Charles's law is now expressed as follows: The volume and Kelvin temperature of a sample of a dry gas will be directly proportional to the pressure, when the pressure is held constant.

The volume of a gas is equal to a constant amount multiplied by the temperature of the gas as determined by the Kelvin scale (zero Kelvin is equivalent to -273.15 degrees Celsius), according to the physical law known as Charles' law.

For more information on Charles' law kindly visit to

https://brainly.com/question/16927784

#SPJ1

Out of the three statements provided, the correct ones are "an electron has a negative electrical charge" and "all of an atom's electrons are located outside its nucleus".

Electrons are fast-moving particles that travel around the nucleus in specific energy levels or shells. These shells are located outside the nucleus and hold varying numbers of electrons.

Since electrons have a negative electrical charge, they are attracted to the positively charged protons in the nucleus, which helps to hold the atom together.

In contrast, protons and neutrons are located in the nucleus and are much larger and heavier than electrons. Electrons are not the same size as protons and are much smaller and lighter.

Overall, understanding the location and charge of these particles is important in understanding the behavior and properties of atoms and molecules.

To learn more about : electron

https://brainly.com/question/26084288

#SPJ11

If you had 6 M acetic acid rather than glacial acetic acid in the first step of the Friedel-Crafts reaction, less product would likely have formed.

The Friedel-Crafts reaction requires a strong Lewis acid catalyst, such as aluminum chloride (AlCl3), which reacts with the acylating agent to form a reactive electrophile. In this case, the acylating agent is acetic anhydride, which reacts with AlCl3 to form an acylium ion that can then react with the aromatic ring. However, the reaction is sensitive to the amount of water present, and the presence of excess water (which would be more likely in the case of dilute acetic acid) can lead to hydrolysis of the acylium ion and a decrease in the yield of the desired product.

Learn more about Friedel-Crafts reaction

https://brainly.com/question/31107543

#SPJ4

Molarity (M) is a unit of concentration that expresses the amount of solute dissolved in a solution. It is defined as the number of moles of solute present per liter of solution (mol/L).

Molarity is commonly used in chemistry to express the concentration of a solute in a solution and is typically represented as moles of solute per liter of solution (mol/L or mol L^-1). Molarity is used to describe the concentration of a solution and is important in various calculations involving chemical reactions and solutions.

To calculate molarity, follow these steps:
1. Determine the number of moles of solute in the solution.
2. Measure the volume of the solution in liters.
3. Divide the moles of solute by the volume of the solution in liters.

Molarity = moles of solute/liters of solution

To know more about Molarity:

https://brainly.com/question/22997914

#SPJ11

Molarity is a unit of concentration in chemistry. It is defined as the number of moles of solute per liter of solution. In other words, it measures the amount of substance (in moles) dissolved in a given volume of solution (in liters). the left column contains "molarity," "moles," and "liters," and the sentences.

To match the items in the left column to the appropriate blanks in the sentences on the right, we can use the following:
- Molarity: a unit of concentration in chemistry
- Number of moles: the amount of substance dissolved in a solution
- Liter of solution: the volume in which the substance is dissolved
- Solvent: the substance in which the solute is dissolved
- Solute: the substance that is dissolved in a solvent to make a solution

So the sentences could be:
- Molarity is a unit of concentration in chemistry that measures the amount of substance (in moles) dissolved in a given volume of solution (in liters).
- The number of moles of solute per liter of solution is known as molarity.
- A liter of solution is the volume in which the solute is dissolved to make a solution with a certain molarity.
- A solvent is a substance in which a solute is dissolved to make a solution of a certain molarity.
- A solute is a substance that is dissolved in a solvent to make a solution of a certain molarity.
Hello! Molarity is a measure of the concentration of a solute in a solution, expressed as moles of solute per liter of solution. To match items in the left column to the appropriate blanks in the sentences on the right, follow these steps:

learn more about molarity

https://brainly.com/question/17138838

#SPJ11

Changes in the chemical environment of a basic buffer solution can cause shifts in the equilibrium between ammonia, hydroxide ion, and ammonium ion, leading to changes in their respective concentrations.

When a basic buffer solution of equal concentrations of ammonia and ammonium nitrate is subjected to changes in its chemical environment, the concentrations of ammonia, hydroxide ion, and ammonium ion will be affected as follows:

1) Addition of an acid: The acid reacts with the hydroxide ion present in the buffer solution to form water. This decreases the concentration of hydroxide ion and shifts the equilibrium towards the formation of more ammonia and ammonium ion, thus increasing their concentrations.

2)Addition of a base: The base reacts with the ammonium ion present in the buffer solution to form ammonia and water. This decreases the concentration of ammonium ion and shifts the equilibrium towards the formation of more hydroxide ion, thus increasing its concentration.

3)Dilution: Diluting the buffer solution with water decreases the concentrations of both ammonia and ammonium ion, but does not affect the concentration of hydroxide ion.

4)Addition of ammonium chloride: The ammonium chloride dissociates into ammonium ion and chloride ion in the buffer solution. The increase in ammonium ion concentration causes the equilibrium to shift towards the formation of more ammonia and hydroxide ion, thus increasing their concentrations.

For such more questions on Ammonium nitrate:

https://brainly.com/question/28760836

#SPJ11

The IUPAC name for the compound shown of a 6 carbon ring has two alcohol substituents on carbons 1 and 3 is cyclohexane-1,3-diol.

The compound shown is called cyclohexane-1,3-diol.

It has a place with the group of cyclic alcohols, which are compounds containing both a hydroxyl (- Goodness) bunch and a cyclic construction in their substance structure.

Cyclohexane-1,3-diol is named by the IUPAC classification framework, which relegates an exceptional and precise name to a given compound in view of its sub-atomic construction.

For this situation, the prefix "cyclo" shows the presence of a cycloalkane ring, explicitly a six-membered ring (cyclohexane). The addition "- diol" demonstrates that there are two hydroxyl (- Gracious) bunches connected to the ring, explicitly at positions 1 and 3.

Accordingly, cyclohexane-1,3-diol is the right IUPAC name for this compound.

To learn more about IUPAC name, refer:

https://brainly.com/question/29926700

#SPJ4

The concentration of stock solution is 15.2 M if You have 450.80 mL of 0.86 M dilute solution that was prepared with 25.50 of stock solution.

For more information on stock solution kindly visit to

https://brainly.com/question/25256765

#SPJ1

The rate of the reaction is directly proportional to the stability of the carbocation intermediate, and any changes in the solvent will affect the rate of the reaction.

In an SN1 reaction, the rate-determining step is the formation of a carbocation intermediate. The stability of the carbocation intermediate affects the rate of the reaction.

In this case, if 2-propanol (isopropanol) was used instead of 2-methyl-2-propanol (t-butanol), the rate of the reaction would decrease. This is because the carbocation intermediate formed in 2-propanol is less stable compared to the one formed in t-butanol.

The carbocation intermediate formed in t-butanol is tertiary, which is more stable than the one formed in isopropanol, which is secondary. This means that the reaction will be slower in isopropanol due to the less stable carbocation intermediate.

To learn more about : reaction

https://brainly.com/question/29470602

#SPJ11