Is this statement true or false?
Gymnosperms reproduce using seeds, but angiosperms do not.
Answer:
FALSE!
Explanation:
Gymnosperms do use seeds but are exposed like the pine cones of pines. Angiosperms still have seeds, however, they flower or fruit.
Answer:
False
Explanation:
Which of the following components does a disc brake system use?
brake shoe
adjuster screw
wheel cylinder
caliper
The caliper is a component which is used by a disc brake system for performing its function.
What are the components of disc brake system?The disc braking system consist of components such as disc/rotor, a brake calliper and brake pads. When the brake pedal is pushed, brake fluid creates pressure that produces friction.
So we can conclude that the caliper is a component which is used by a disc brake system for performing its function.
Learn more about system here: https://brainly.com/question/14323743
Why is ocean water near the equator warmer than ocean water at the poles?
O A. The sun's rays strike the water more directly near the equator.
O B. Deep sea vents pump steam into the conveyor belt near the
equator.
O C. The water is denser and saltier near the equator, so it holds more
heat.
D. Due to Earth's rotation, gyres near the equator flow clockwise.
SUBM
Explain why you think it is important to know the three different types of rocks.
Answer:
because they contains clues about what the earth was like in the past. different rocks from under only certain conditions and even the dullest gray lump of rock.
how many grams of P3O9 contain 9.67x10^23 atoms of oxygen?
Answer:
49.1 g
Explanation:
First we convert 9.67x10²³ atoms of oxygen into moles, using Avogadro's number:
9.67x10²³ atoms ÷ 6.023x10²³ atoms/mol = 1.60 mol OThen we calculate how many P₃O₉ moles there would be with 1.60 O moles:
1.60 mol O * [tex]\frac{1molP_3O_9}{9molO}[/tex] = 0.18 mol P₃O₉Finally we convert 0.18 P₃O₉ moles into grams, using its molar mass:
0.18 mol P₃O₉ * 237 g/mol = 49.1 g
What is the formula for the sulfate ion?
What is the formula for the sulfite ion?
What is the formula for the hydrogen sulfate ion?
Sulfate - SO4^-2
Sulfite - SO3^-2
Hydrogen Sulfate - HSO4-
calculate the percentage of sodium and carbon and oxygen in sodium carbonate
The lithosphere ______ part of the earth’s crust.
A. Gaseous
B. Solid
C. Water
D. Liquid
Answer:
The lithosphere solid part of the earth's crust
Which statement best explains how weather is related to the water
cycle?
Answer:
Increased evaporationof water vapour from sea or land will increase rainfall
Answer:
Explanation:
increased evaporation of water vapor from sea to land will increase rainfall
A chlorine concentration of 0.500 ppm is desired for water purification. What
mass of chlorine must be added to 2500 L of water to achieve this level?
Answer:
1.25 grams of chlorine.
Explanation:
Hello there!
In this case, since it is possible to define the parts per million of chlorine as the milligrams of chlorine per liters of water, in order to obtain the mass of chlorine in 2500 L, we proceed as follows:
[tex]ppm=\frac{mg}{L}\\\\mg=ppm*L[/tex]
In such a way, we plug in the given 0.500 ppm and 2500 L to obtain (in grams):
[tex]mg=0.500mg/L*2500L\\\\g=1250mg*\frac{1g}{1000mg}\\\\ g=1.25g[/tex]
Best regards!
Which element's properties form the basis for all life?
Answer:
carbon
Explanation:
The properties of carbon forms the basis for all life. Explanation: The atoms of carbon are found in the molecules of all living species.
I need help with this pls help
Answer: true
Explanation:
electronic configuration [Ne]3s2 3p6
Methane is combusted with Oxygen to produce Carbon Dioxide and Water. How many grams of oxygen are required to react with 55 grams of
Methane?
A.55 g
B.110 g
C.165 g
D.220 g
ASAP!!
Identify the limiting reactant when 6 moles of CaCl2 is combined with 6 moles of Al2O3.
Reaction: 3CaCI2 + Al2O3 -> 3CaO + 2AlCI3
Answer:
just downloud smart
Explanation:
thank me later
What is the molar mass of Mg(HSO3)2?
BRAINLIEST WILL BE GIVEN TO BEST ANSWERED!
What is the best explanation for why a magnet is different from a regular piece of metal?
A magnet has more electrons
The magnetic domains in a magnet are lined up with each other
Magnets are made of iron
A magnet has an electric field
Answer:
the second one
Explanation:
metal doesn't act like a magnet because the domains don't have a preferred direction of alignment. Magnets are all aligned in a specific direction.
Somebody help me asap please giving brainliest
Answer:
fire > rocks > air
By the reaction between
H3PO4 and Ca(OH)2,
Can be formede:
a. Ca(HPo4)2,
b. СaHP4
c. Ca(H2PO4)2
d. Ca2HP02
e.Сa3(PO4)2
the correct answers : b, c, e
the question is:
I am preparing for an admittion test in chemistry, I face this kind of questions which I dont how to understand or if I should only memorize.
I appreciate all your help.
thank you alot.
Answer:
ANSWER is E
Explanation:
2H₃PO₄ + 3Ca(OH)₂→ 6H₂O + Ca₃(PO₄)₂
Answer:
First step is to find what the products would be. Since this seems to be a double displacement, you get: H3PO4(aq)+Ca(OH)2(aq)→ H2O(L)+Ca3(PO4)2(s)
You know the products because H has a charge of +1, so PO4 must have a charge of -3, and since OH has a charge of -1, Ca must be +2. Then make each compound have a net charge of 0. H20 is a liquid since aq solutions have liquid water. Ca3(PO4)2 is a solid, use the solubility rules.
Lastly, balance the equation: 2H3PO4(aq)+3Ca(OH)2(aq)→ 6H2O(L)+Ca3(PO4)2(s)
So the salt formed is Ca3(PO4)2
Is the bond length in HCl the same as that in DCl? The wavenumbers of the J = 0 1 rotational transitions for H35Cl and 2H35Cl are 20.8784 and 10.7840 cm–1, respectively. Accurate atomic masses are H = 1.007825 amu, 2H = 2.0140 amu, and 35Cl = 34.96885 amu. Based on this information alone, can you conclude that the bond lengths are the same or different in the two molecules?
What is the mass of 5.55 moles of carbon monoxide
Answer:
[tex]\boxed {\boxed {\sf 155 \ g\ CO}}[/tex]
Explanation:
To convert from moles to mass, the molar mass must be used.
First, write the chemical formula for carbon monoxide. Since the carbon (C) comes first without a prefix, there is 1 carbon atom. The prefix mono- before oxide means 1, so there is also 1 oxygen (O) atom. The formula is CO.
Next, look up their molar masses on the Periodic Table.
C: 12.011 g/mol O: 15.999 g/molSince there is 1 atom of each, the molar masses can be added.
CO: 12.011 g/mol + 15.999 g/mol = 28.01 g/molUse this molar mass as a ratio.
[tex]\frac {28.01 \ g \ CO} {1 \ mol \ CO}[/tex]
Multiply by the given number of moles:5.55
[tex]5.55 \ mol \ CO *\frac {28.01 \ g \ CO} {1 \ mol \ CO}[/tex]
The moles of carbon monoxide cancel.
[tex]5.55 * \frac {28.01 \ g \ CO} {1 }[/tex]
Multiply.
[tex]155.4555 \ g \ CO[/tex]
The original measurement of moles has 3 significant figures, so our answer must have the same. For the number we calculated, it is the ones place. The 4 in the tenths place tells us to leave the 5.
[tex]155 \ g\ CO[/tex]
5.55 moles of carbon monoxide is about 155 grams.
what is the total of the amount of energy that is reflected back into space
4. Describe a simple experiment that can be performed in the laboratory to demonstrate
the formation of iron (III) chloride from iron fillings.
Answer:
laboratory use the organic substances dissolve in water methanol or ethanol then Sinha to rise iron chloride solution is added a transient permanent coloration usually purple green or blue indicate the presence of a funnel or an hall
Balanced equation for Fe reacting with [tex]Cl_2[/tex]
[tex]2Fe + 3Cl_2[/tex] → [tex]2FeCl_3[/tex]
What are iron fillings?Iron filings are small shavings of ferromagnetic material.
When hydrochloric acid (HCl) reacts with iron filings (Fe) a dissolving metal reaction occurs with the Fe being converted to iron chloride ([tex]FeCl_2[/tex]) and hydrogen ([tex]H_2[/tex]).
The balanced equation is:
[tex]Fe + 2HCl[/tex] → [tex]FeCl_2 + H_2[/tex]
Note that reaction only produces [tex]FeCl_2[/tex] and not [tex]FeCl_3[/tex]. To make [tex]FeCl_3[/tex] you have to get more forcing and react Fe with chlorine gas ([tex]Cl_2[/tex]) at elevated temperature.
Since we are balancing equations here, below is the balanced equation for Fe reacting with [tex]Cl_2[/tex] (offered at no extra charge):
[tex]2Fe + 3Cl_2[/tex] → [tex]2FeCl_3[/tex]
Learn more about iron fillings here:
https://brainly.com/question/21819285
#SPJ2
1 = 2 Amps, R = 3 Ohms, V = ? Volts
Answer:
6 volts
Explanation:
Use Ohm's Law:
V = IR
V = (2 amps)(3 ohms) = 6 volts
A 9.56 sample of CuS is found to contain 6.35 g of copper what is the percent by mass of the copy and sulfur in this compound? (show your work)
Answer:
%Cu = 66.4%
%S = 33.6%
Explanation:
Step 1: Given data
Mass of CuS: 9.56 gMass of Cu: 6.35 gStep 2: Calculate the mass of S
The mass of CuS is equal to the sum of the masses of Cu and S.
mCuS = mCu + mS
mS = mCuS - mCu
mS = 9.56 g - 6.35 g = 3.21 g
Step 3: Calculate the percent by mass of each element
We will use the following expression.
%Element = mElement / mCompound × 100%
%Cu = mCu / mCuS × 100% = 6.35 g / 9.56 g × 100% = 66.4%
%S = mS / mCuS × 100% = 3.21 g / 9.56 g × 100% = 33.6%
What pair of properties do all solids have?
Answer:
Has definite shape and volume
Solids have high melting point
Explanation:
A gas occupies 5.0 cubic meters at a temperature of 600. K. If the temperature is lowered to 300. K at constant pressure, the new volume occupied by the gas will be:
Answer:
[tex]V_2=2.5m^3[/tex]
Explanation:
Hello!
In this case, according to the Charles' law as a directly proportional relationship between volume and temperature:
[tex]\frac{V_2}{T_2}=\frac{V_1}{T_1}[/tex]
Thus, in order to compute the final volume, V2, we obtain the following expression:
[tex]V_2=\frac{V_1T_2}{T_1}\\\\V_2=\frac{5m^3*300K}{600K}\\\\V_2=2.5m^3[/tex]
Best regards!
The total pressure in a container is 37.9 psi. There are two gases in the container. Gas A exerts a pressure of 18.4 psi. What is the pressure of gas B?
Answer:
19.5
Explanation: using dalton law pt=p1+p2+p3...
the total pressure is 37.9 so to get pressure of gas b subtract pressure of gas a from total pressure.37.9-18.4 gas b equals 19.5
A gas is at 39.2c and 4.50L. What is the temperature (oC) when the gas is expanded to 10L?
Answer:
420.7 degrees C
Explanation:
Use the formula V1/T1 = V2/T2 (Charles' Law) to find T2. Make sure to convert your temperatures to Kelvin by adding 273 to the Celsius temperature.
V1 = 4.50 L
V2 = 10 L
T1 = 39.2 C = 312.2 K
Solve V1/T1 = V2/T2 for T2 and you get T2 = V2T1/V1
T2 = (10 L)(312.2 K) / (4.50 L) = 693.8 K
You can subtract 273 to get the temperature back to Celsius.
T2 = 693.8 - 273 = 420.7 degrees C
Please help asap. Brainliest to correct.
Which formula can be used to calculate the percent yield? (5 points)
Select one:
a. (Theoretical yield ÷ actual yield) x 100
b. (Actual yield ÷ theoretical yield) x 100
c. (Amount of reactants ÷ amount of products) x 100
d. (Amount of products ÷ amount of reactants) x 100
Answer:
I guess this answer is c
yh
Answer:
b. (Actual yield ÷ theoretical yield) x 100
Explanation:
The percent yield will be a ratio of collected or actual yield to the theoretical yield. Like any percentage, you are determining a part of a whole. You multiply by 100 to convert your decimal answer from the division into a percentage.