How many molecules are in 0.79 moles of NH4?

Answer:

Acid

Explanation:

Answer: 15.99 x2g

Explanation:

Answer:

C

Explanation:

No reaction because not enough moles of silver are present for the reaction to occur.

This problem is providing the ionic radius of an anion, A²⁻ as 0.290 nm and asks for that of the cation A²⁺ in comparison to the former.

Firstly, we need to recall the concept of ionic radius, as the distance between the nucleus and the outermost electron shell of an ion. In such a way, we can have two scenarios:

1. Anions result from the gain of electrons exhibited by a nonmetal, which means they turn out bigger than the neutral atom.

2. Cations result from the loss of electrons exhibited by a metal, which means they turn out smaller than the neutral atom.

With the aforementioned, we infer that the cation A²⁺, will me smaller than the anion A²⁻, which means it will have an ionic radius smaller than 0.290 nm.

Learn more:

Answer:

Bohr model A

Explanation:

It has more valance electrons therefore has more interaction between the atoms and has more electronegativity.

The empirical formula of the compound (calcium bromide) is CaBr₂

From the question given above, the following data were obtained:

Ca = 4.02 g

Br = 15.95 g

Divide by their molar mass to obtain their mole

Ca = 4.02 / 40 = 0.1005 mole

Br = 15.95 / 80 = 0.199 mole

Divide by the smallest to obtain the mole ratio

Ca = 0.1005 / 0.1005 = 1

Br = 0.199 / 0.1005 = 2

Therefore, the empirical formula of calcium bromide is CaBr₂

Learn more: https://brainly.com/question/14710108

Answer:

Must be stable and relatively insoluble in boiling water.

Explanation:

it must be stable and relatively insoluble in boiling water and a must-have vapor pressure in boiling water that is of the order atmosphere at or more compound satisfy these conditions that will generally not separate from each other but we'll be separated from everything else.

The cart accelerated at a constant rate of approximately 0.8 m/s². Option (B) is correct.

Option B is the best description based on the graphed position data during the 7-second time interval. The cart's acceleration can be determined by analyzing the shape of the position-time graph.

If the cart was stationary, the position-time graph would be a horizontal line (option C). If the cart moved at a constant velocity, the graph would be a straight line inclined at a constant angle (option D).

However, the graph likely shows a curved line, indicating changing position over time. This suggests that the cart experienced acceleration. To further confirm, calculate the acceleration:

Acceleration (a) = Δv / Δt,

where Δv is the change in velocity and Δt is the change in time.

Given the time interval is 7 seconds, and the initial and final velocities are likely different, you can calculate the average acceleration. If the average acceleration is approximately 0.8 m/s², then option B is correct.

The graphed data aligns with the scenario of constant acceleration, supporting option B.

To learn more about acceleration  here

https://brainly.com/question/2303856

#SPJ3

Answer:

Explanation:

The wavelength of a wave can be found by using the formula

[tex]\lambda = \frac{c}{f} \\[/tex]

where

c is the speed of the wave

f is the frequency

From the question

c = 5 m/s

f = 2.5 Hz

We have

[tex] \lambda = \frac{5}{2.5} = 2 \\ [/tex]

We have the final answer as

Hope this helps you

Physical changes can be reversed and chemical changes can’t be reversed. A physical property is a characteristic which can be identified without changing the substance but to identify a chemical property, you do have to change the substance.

Explanation:

DCO2/H2 = 44/2 = 22............................

Answer: if it’s a multiple choice then it should be swing dances

Explanation:While the majority of swing dances began in African American communities as vernacular African American dances, some influenced swing-era dances, like Balboa, developed outside of these communities.

Answer:  E

1

−

E

4

=

Δ

E

=

−

2.18

×

10

−

18

J

(

1

n

2

f

−

1

n

2

i

)

=

−

2.18

×

10

−

18

J

(

1

1

2

−

1

4

2

)

=

−

2.18

×

10

−

18

J

(

15

16

)

=

−

2.04

×

10

−

18

J

After you obtain the energy, then you can realize that that energy has to correspond exactly to the energy of the photon that came in:

|

Δ

E

|

=

E

photon

=

h

ν

=

h

c

λ

where  

h

is Planck's constant,  

c

is the speed of light, and  

λ

is the wavelength of the incoming photon. Thus, the wavelength is:

⇒

λ

=

h

c

E

photon

=

(

6.626

×

10

−

34

J

⋅

s

)

(

2.998

×

10

8

m/s

)

2.04

×

10

−

18

J

=

9.720

×

10

−

8

m

=

97.20 nm

Explanation:

Answer:

D. Na has a larger radius than Na+ because Na+ has lost its outermost energy shell.

Explanation:

The radius is larger because the diameter of Na+ is larger.

Sodium has smaller atomic  radius than sodium cation because sodium has expanded electron cloud.

Atomic radius is defined as the  distance between outermost shell and the nucleus. Atomic radius varies across the periodic table where in groups it increases due to the fact that new shells are added on moving sown the group.

While in a period it decreases from left to right across the periodic table as electrons are added to the same shell which causes contraction of the atom.In case of comparison between an atom and a cation an atom has smaller atomic radius due to presence of electrons while in case of ions atomic radius is smaller as they have less number of electrons.

Atoms have expanded electron cloud while the electron cloud in case ions is small , the reason being the presence of large number of electrons in case of atoms and less number of electrons in case of ions.

Learn more about atomic radius,here:

https://brainly.com/question/14544878

#SPJ5

Answer:

bacteria

Explanation:

The pathogen below is a single-celled organism without a nucleus that can cause illness in a humans.

Answer: A

Explanation:

Answer:

B. The ballon will repel the paper

Answer:

Can volume alone be used to predict whether an object will sink or float? -No, you need both mass and volume to find its density to see if it can float.

Anwser

my anwser is both will absorb and the will retain

Janelle made her solar oven by lining a piece of poster board with aluminum foil, shaping it into a cone, and placing it over a piece of black paper in an empty box. The food will go in a plastic sandwich bag on top of the black paper in the center of the cone. The image shows Janelle's cone oven.

cone shaped solar oven

Corey made his solar oven by lining the inside of a shoe box with black paper, placing a piece of plastic wrap over the bottom of the shoe box, and lining the lid of the box with aluminum foil. He used a pencil to prop the lid open at an angle. The food will go on the black paper under the plastic wrap. The image shows Corey's shoe box oven.

shoe box solar oven

Janelle's and Corey's designs both use aluminum foil, black paper, and either a plastic bag or plastic wrap so that means that they both absorb and they will retain and is u ever do it do not put it under a shave

Answer:

C18H32O2

Explanation:

This is it, i hope it helps Good luck.

Answer:

B

Explanation:

new oceanic crust will form.

The formation of a new oceanic crust will be the primary result of the continuation of the geologic processes. Therefore, option (B) is correct.

The oceanic crust can be described as the uppermost layer of the oceanic portion of the tectonic plates. The oceanic crust is composed of the upper oceanic crust, with pillow lavas complex, and the lower oceanic crust, made of troctolite, and ultramafic cumulates.

The oceanic crust lies above the rigid uppermost layer of the mantle. The crust and the rigid upper mantle layer together compose the oceanic lithosphere.

The oceanic crust is rich in iron and magnesium and composed of mafic rocks. It is thinner than the continental crust less than 10 Km thick but it is denser with 3.0 g/cm³ as opposed to the continental crust.

The oceanic crust displays a symmetrical pattern of positive and negative magnetic lines emanating from the mid-ocean ridge.

Learn more about the oceanic crust, here:

https://brainly.com/question/5637320

#SPJ2

Answer:

But when there is too much phosphorus and nitrogen into water systems, it can speed up the process of eutrophication ( increase in the concentration of minerals and nutrients, which enhances the growth of algae, which causes algal blooms). Due to this, dissolved oxygen level is declined as not enough light penetrates in the water body.

Explanation:

Answer:

the pH of the acid is the property that determines whether an acid is a strong acid or a weak acid

Answer:

experiment can show the movement of pollutants through the groundwater!

Explanation:

Answer:

I see that the water is starting to get darker and darker which means it is getting dirtier the higher is goes up.  So that means that the soil and gravel will pollute the water with dirt, gravel, etc.

Explanation: Please give brainliest have a good day:)

Answer:

A. By melting

Explanation:

You can break it down by thermal decomposition which is basically melting it and thats because many metal carbonates can take part in thermal decomposition reactions.

[tex]\\ \sf\longmapsto H_2+Br_2\longrightarrow HBr[/tex]

[tex]\\ \sf\longmapsto H_2+Br_2\longrightarrow 2HBr[/tex]

On reactant side:-

On products side

The balanced chemical equation for the synthesis of hydrogen bromide is [tex]\rm H_2\;+\;Br_2\;\rightarrow\;2\;HBr[/tex].

The balanced chemical equation has been given as the reaction in which the number of atoms for each element on the product and the reactant side is equal.

The HBr has been formed with the reaction of the hydrogen and the bromine. The balanced chemical equation for the reaction has been:

[tex]\rm H_2\;+\;Br_2\;\rightarrow\;2\;HBr[/tex]

Learn more about the balanced chemical equations, here;

https://brainly.com/question/8062886

Answer:

when you pray you will feel a peace and happiness in your heart

Answer:

Explanation:

Im sorry all i know is that #3 is for sure combustion