Chemistry High School

How many moles of NH3 can be produced if 1.14 moles of H2 reacts completely with nitrogen?

N2 + 3 H2 --> 2 NH3

Answers

Answer 1

Explanation:

The balanced equation for the reaction is:

N2 + 3 H2 → 2 NH3

From the equation, we can see that 3 moles of H2 are needed to produce 2 moles of NH3.

Therefore, if 1.14 moles of H2 reacts completely, we can calculate the moles of NH3 produced as follows:

1.14 moles H2 × (2 moles NH3 / 3 moles H2) = 0.76 moles NH3

Therefore, 0.76 moles of NH3 can be produced if 1.14 moles of H2 reacts completely with nitrogen.

Related Questions

What is one possible reason dolphin dissapered

Answers

Explanation:

Foremost among the threats is fishing bycatch—marine animals incidentally caught and killed in fishing operations.

This is a serious crisis, not only for these charismatic animals, but also for the health of our oceans, where cetaceans play an irreplaceable role as apex predators.

(d) If 48.0 g of NaCl react with 19.0 g of H₂SO4, what mass of Na2SO4 will be produced?​

Answers

Answer:

the mass of Na2SO4 produced is 27.6 g.

Explanation:

determine the balanced chemical equation for the reaction between NaCl and H₂SO4, and then use stoichiometry to calculate the mass of Na2SO4 produced.

The balanced chemical equation for the reaction is:

2 NaCl + H₂SO4 → Na2SO4 + 2 HCl

This equation tells us that 2 moles of NaCl react with 1 mole of H₂SO4 to produce 1 mole of Na2SO4.

First, we need to determine the number of moles of NaCl and H₂SO4 we have:

moles of NaCl = mass / molar mass = 48.0 g / 58.44 g/mol = 0.821 mol

moles of H₂SO4 = mass / molar mass = 19.0 g / 98.08 g/mol = 0.194 mol

Since H₂SO4 is the limiting reactant (it is present in less amount than required for complete reaction), we need to use the number of moles of H₂SO4 to calculate the number of moles of Na2SO4 produced:

moles of Na2SO4 = moles of H₂SO4 / 1 x (1 mole Na2SO4 / 1 mole H₂SO4) = 0.194 mol x (1/1) = 0.194 mol

Finally, we can use the molar mass of Na2SO4 to calculate the mass of Na2SO4 produced:

mass of Na2SO4 = moles of Na2SO4 x molar mass = 0.194 mol x 142.04 g/mol = 27.6 g

Therefore, the mass of Na2SO4 produced is 27.6 g.

Cite the conditions to make the bulb light up

Answers

In order to make a bulb light up, certain conditions need to be met. Firstly, there must be a closed circuit, meaning that there is a continuous flow of current through the circuit. This can be achieved by connecting the bulb to a power source, such as a battery or a generator, and completing the circuit with wires.

Secondly, the bulb must be connected properly to the circuit. This involves connecting the positive and negative terminals of the bulb to the corresponding terminals of the power source or the wires.

Finally, the bulb must have the correct voltage and wattage rating. Using a bulb with a higher or lower rating than the power source can cause the bulb to either not light up or burn out quickly.

To learn more about battery refer to:

brainly.com/question/16953222

#SPJ4

Zinc hydroxide, Zn(OH)2, is precipitated from the tailings ponds of zinc mining operations before the water is released into local rivers. This reduces the concentration of Zn2+ ions in the wastewater. 5.00 kg of sludge containing zinc hydroxide is titrated against HCl solution and 1.50 L of 2.0 M acid is required to reach the endpoint and neutralize the zinc hydroxide. What mass of zinc is contained in the 5.00 kg sludge?

Answers

Answer:

First, we need to find the number of moles of HCl used in the titration:

moles HCl = M x V = 2.0 mol/L x 1.50 L = 3.00 mol

Since zinc hydroxide and HCl react in a 1:2 molar ratio according to the balanced chemical equation:

Zn(OH)2 + 2 HCl → ZnCl2 + 2 H2O

we know that twice as many moles of HCl are required to react with each mole of Zn(OH)2. Therefore, the number of moles of zinc hydroxide in the 5.00 kg sludge can be calculated as follows:

moles Zn(OH)2 = 1/2 x moles HCl = 1/2 x 3.00 mol = 1.50 mol

Finally, we can use the molar mass of Zn(OH)2 to convert the number of moles to mass:

mass Zn(OH)2 = moles Zn(OH)2 x molar mass Zn(OH)2

= 1.50 mol x 99.39 g/mol

= 149.1 g

Therefore, the mass of zinc contained in the 5.00 kg sludge is 149.1 grams.

Explanation:

What is the mass, in kilograms, of 3.28 x 103 mol of H2O?

Answers

3.28 x 10³ mol of water has a mass of 59.1156 kg. This is the accurate answer to the given question.

How do you determine 3.28 x 10³ mol of H2O's mass in kilograms?

We can use the molar mass of water, which is 18.02 g/mol, to calculate the mass of 3.28 x 10³ moles of H2O. The following equation can be used to translate the quantity of moles into grams:

mass is determined by multiplying the number of moles by the molar mass.

Inputting the values provided yields:

18.02 g/mol times 3.28 x 10 3 moles of mass equals 59,115.6 g.

Lastly, by dividing by 1000, we can change the mass from grams to kilograms:

mass is 59,115.6 grams per kilogram (59.1156 kg).

As a result, 3.28 x 10³ moles of H2O have a mass of 59.1156 kg.

To learn more about moles visit:

brainly.com/question/26416088

#SPJ1

Calculate the pH at the following points in a titration of 40 mL (0. 040 L) of 0. 100 M

barbituric acid (Ka = 9. 8  10–5) with 0. 100 M KOH.

(a) no KOH added

(b) 20 mL of KOH solution added

(c) 39 mL of KOH solution added

(d) 40 mL of KOH solution added

(e) 41 mL of KOH solution added

Answers

We are given:

Molarity of
C
4
H
4
N
2
O
3
=
0.100

M
Volume of
C
4
H
4
N
2
O
3
=
40

m
L
Molarity of
K
O
H
=
0.100

M
K
a
=
9.8
×
10
−
5


Chemical reaction:
C
4
H
4
N
2
O
3
+
K
O
H
→
C
4
H
3
N
2
O
3
K
+
H
2
O



Part a:
no KOH is added.

The concentration of hydrogen ion can be calculated as:

C
4
H
4
N
2
O
3
⇌
C
4
H
3
N
2
O
−
3
+
H
+
K
a
=
[
C
4
H
3
N
2
O
−
3
]
[
H
+
]
[
C
4
H
4
N
2
O
3
]
[
C
4
H
3
N
2
O
−
3
]
=
[
H
+
]
9.8
×
10
−
5
=
[
H
+
]
2
[
C
4
H
4
N
2
O
3
]
9.8
×
10
−
5
=
[
H
+
]
2
0.100
[
H
+
]
2
=
9.8
×
10
−
6
[
H
+
]
=
3.13
×
10
−
3

M

The pH value of the solution is:

p
H
=
−
log
[
H
+
]
p
H
=
−
log
(
3.13
×
10
−
3
)
p
H
=
2.50



Part b:
20 mL of KOH is added.

We will find the initial moles of the reactants:

M
o
l
e
s
(
n
)
=
M
o
l
a
r
i
t
y
(
M
)
×
V
o
l
u
m
e
(
V
)
n
C
4
H
4
N
2
O
3
=
0.100

M
×
0.040

L
=
0.0040

m
o
l
n
K
O
H
=
0.100

M
×
0.020

L
=
0.0020

m
o
l

Moles of the acid and salt after the addition of KOH:

n
C
4
H
4
N
2
O
3
=
0.00400
−
0.0020
=
0.0020

m
o
l
n
C
4
H
3
N
2
O
3
K
=
0.00200

m
o
l

The concentration of acid and salt:

M
=
n
V
V
=
40
+
20
=
60

m
L
[
C
4
H
4
N
2
O
3
]
=
0.0020

m
o
l
0.060

L
=
0.033

M
[
C
4
H
3
N
2
O
3
K
]
=
0.0020

m
o
l
0.060

L
=
0.033

M

The pH value is calculated as:

p
H
=
−
log
(
K
a
)
+
log
(
[
C
4
H
3
N
2
O
3
K
]
[
C
4
H
4
N
2
O
3
]
)
p
H
=
−
log
(
9.8
×
10
−
5
)
+
log
(
0.033
0.033
)
p
H
=
4.01



Part c:
39 mL of KOH is added.

We will find the initial moles of the reactants:

M
o
l
e
s
(
n
)
=
M
o
l
a
r
i
t
y
(
M
)
×
V
o
l
u
m
e
(
V
)
n
C
4
H
4
N
2
O
3
=
0.100

M
×
0.040

L
=
0.0040

m
o
l
n
K
O
H
=
0.100

M
×
0.039

L
=
0.0039

m
o
l

Moles of the acid and salt after the addition of KOH:

n
C
4
H
4
N
2
O
3
=
0.00400
−
0.0039
=
0.0001

m
o
l
n
C
4
H
3
N
2
O
3
K
=
0.0039

m
o
l

The concentration of acid and salt:

M
=
n
V
V
=
40
+
39
=
79

m
L
[
C
4
H
4
N
2
O
3
]
=
0.0001

m
o
l
0.079

L
=
0.00126

M
[
C
4
H
3
N
2
O
3
K
]
=
0.0039

m
o
l
0.079

L
=
0.0494

M

The pH value is calculated as:

p
H
=
−
log
(
K
a
)
+
log
(
[
C
4
H
3
N
2
O
3
K
]
[
C
4
H
4
N
2
O
3
]
)
p
H
=
−
log
(
9.8
×
10
−
5
)
+
log
(
0.0494
0.00126
)
p
H
=
4.01
+
1.59
p
H
=
5.60



Part d:
40 mL of KOH is added.

We will find the initial moles of the reactants:

M
o
l
e
s
(
n
)
=
M
o
l
a
r
i
t
y
(
M
)
×
V
o
l
u
m
e
(
V
)
n
C
4
H
4
N
2
O
3
=
0.100

M
×
0.040

L
=
0.0040

m
o
l
n
K
O
H
=
0.100

M
×
0.040

L
=
0.0040

m
o
l

Moles of the acid and salt after the addition of KOH:

n
C
4
H
4
N
2
O
3
=
0.00400
−
0.0040
=
0.0

m
o
l
n
C
4
H
3
N
2
O
3
K
=
0.0040

m
o
l

The concentration of acid and salt:

M
=
n
V
V
=
40
+
40
=
80

m
L
[
C
4
H
4
N
2
O
3
]
=
0.0

m
o
l
0.080

L
=
0.0

M
[
C
4
H
3
N
2
O
3
K
]
=
0.0040

m
o
l
0.080

L
=
0.050

M

The pH value is calculated as:

p
H
=
7
+
1
2
(
p
K
a
+
log
[
C
4
H
3
N
2
O
3
K
]
)
p
H
=
7
+
1
2
(
4.01
+
log
(
0.05
)
)
p
H
=
7
+
1
2
(
4.01
−
1.30
)
p
H
=
7
+
1.35
p
H
=
8.35



Part e:
41 mL of KOH is added.

We will find the initial moles of the reactants:

M
o
l
e
s
(
n
)
=
M
o
l
a
r
i
t
y
(
M
)
×
V
o
l
u
m
e
(
V
)
n
C
4
H
4
N
2
O
3
=
0.100

M
×
0.040

L
=
0.0040

m
o
l
n
K
O
H
=
0.100

M
×
0.041

L
=
0.0041

m
o
l

Moles of the base remains left over after the addition of KOH:

n
K
O
H
=
0.0041
−
0.0040
=
0.0001

m
o
l

The concentration of base:

M
=
n
V
V
=
40
+
41
=
81

m
L
[
K
O
H
]
=
0.0001

m
o
l
0.081

L
=
0.00123

M

The concentration of hydroxide ion is equal to 0.00123 M because it dissolves as:

K
O
H
→
K
+
+
O
H
−

The pOH value of the solution:

p
O
H
=
−
log
[
O
H
−
]
p
O
H
=
−
log
(
0.00123
)
p
O
H
=
2.91

The pH value is calculated as:

p
H
+
p
O
H
=
14
p
H
+
2.91
=
14
p
H
=
11.1

hy is it important to record the temperature and barometric pressure? how does one effect the other?

Answers

Recording temperature and barometric pressure is critical because they are two essential parameters that help determine weather conditions. One can affect the other, and understanding their relationship can provide valuable insights into weather patterns and changes.

Let's understand this in detail:

Barometric pressure affects temperature, and temperature affects barometric pressure. The two are closely linked and work together to influence weather patterns. Temperature affects barometric pressure through thermal expansion. As temperature increases, molecules within the air move around more vigorously, requiring more space.

The result is that the volume of air increases, which decreases the pressure. Conversely, when temperatures drop, molecules move less, requiring less space and increasing pressure.

Barometric pressure also affects temperature by affecting air density. When barometric pressure drops, the air expands, and density decreases. The air then rises and cools. Conversely, when barometric pressure increases, the air becomes denser and sinks, warming as it descends. Hence, temperature and barometric pressure affect each other.

#SPJ11

Learn more about barometric pressure: What is a barometric pressure? https://brainly.com/question/3083348

Explain in a three-paragraph essay the mechanics of how a battery works. How does the choice of metals used in a battery affect its performance? what specific metals work best?

Answers

A battery is a device that converts chemical energy into electrical energy through a process known as an electrochemical reaction.

How does a battery work ?

When a battery is connected to a circuit, the electrochemical reaction causes a flow of electrons from the anode to the cathode, generating an electric current that can power a device.

The metal chosen for the anode must be capable of losing electrons easily, while the metal chosen for the cathode must be capable of accepting electrons. The choice of metals can also affect the voltage and capacity of the battery, as well as its overall efficiency.

In general, the metals used in a battery should have a large difference in their electronegativity values, which determines how easily an atom can attract electrons. Common metals used in batteries include zinc, lithium, nickel, and cadmium.

Find out more on batteries at https://brainly.com/question/16553902

#SPJ1

14. What is the molecular mass of a substance if

22. 5 g dissolved in 250 g of water produces a

solution whose freezing point is -0. 930°C?

Answers

The molecular mass of the substance is 181 g/mol if 22. 5 g dissolved in 250 g of water produces a solution whose freezing point is -0. 930°C.

To determine the molecular mass of the substance, we can use the freezing point depression formula:

ΔTf = Kf·m

Where ΔTf is the freezing point depression, Kf is the freezing point depression constant of water (1.86°C·kg/mol), and m is the molality of the solution, which is the number of moles of solute per kilogram of solvent.

We can start by calculating the molality of the solution:

molality = moles of solute/mass of solvent (in kg)

Since we know that 22.5 g of the substance is dissolved in 250 g of water, we can calculate the mass of the solvent as:

mass of solvent = 250 g / 1000 = 0.250 kg

The mass of the solute can be calculated as:

mass of solute = 22.5 g / 1000 = 0.0225 kg

Now we can calculate the molality of the solution:

molality = 0.0225 kg / 0.250 kg = 0.09 mol/kg

Next, we can use the freezing point depression formula to calculate the molecular mass of the substance:

ΔTf = Kf·m

-0.930°C = 1.86°C·kg/mol x 0.09 mol/kg

Solving for the molecular mass (M):

M = (Kf x m) / ΔTf = (1.86°C·kg/mol x 0.09 mol/kg) / 0.930°C

M = 0.181 kg/mol = 181 g/mol

Therefore, the molecular mass of the substance is 181 g/mol.

Learn more about molecular mass:

https://brainly.com/question/18446366

#SPJ4

A sample of gas of mass 2.929g occupies a volume of 426mL at 0°C and 1.00atm pressure.what is molecular weight of the gas?

Answers

Answer:

154 g/mole

Explanation:

We are given the mass of the gas, but we also need the number of moles the 2.929g represents.  Since we are provided the conditions of the gas, we can the Ideal Gas law to find the number of moles of the mystery gas.  

Ideal Gas Law:  PV = nRT, where P, V, and T are the pressure, volume, and temperature (temperature must be in degrees Kelvin), n is the moles, and R is the gas constant.

Let's choose the gas constant that has the same units as we were given.  R = 0.0820575 [L⋅atm⋅/(K⋅mol)] comes the closest, but we'll still need to convert ml to liters(L) and °C to °K:

  426mL = 0.426L

  0°C = 273.25   [add 273.15 to the Centrigrade value]

Let's rearrnage the ideal gas law to solve for n, the number of moles:

                           n = (PV/RT)

Now enter the data:

                            n = (1atm)(0.426L)/[(0.0820575 L⋅atm⋅/(K⋅mol))*(273.15°K)]

n = (1atm)(0.426L)/[(0.0820575 L⋅atm⋅/(K⋅mol))*(273.15°K)]   [Units that cancle are highlighted]

n = (1)(0.426)/[(0.0820575 /(mol))*(273.15)]  [We are left only with moles (mol)

n = (0.426)/(0.0820575)/(273.15) [1/1/mol]  [Move the only unit out (1/1/mol)]

n = (0.426)/(0.0820575)/(273.15) [1/1/mol] = 0.0190 moles

Note that the unit moves to the top, i.e., : 1/1/mol = mole

We have the mass and the number of moles.  Divide the two to obtain molar mass:

      (2.929g)/(0.0190 moles) = 154 g/mole   This is also the molecular weight.

[I don't know what is a gas at 0°C and has that molecular weight]

Two platinum plates are covered with an unknown metal. The mass of these new plates is the same. One of these plates is dipped into a mercury (II) sulphate solution, the other is dipped into a copper (II) sulphate solution. By the time all the metal on platinum had changed, the mass of the plate decreased by 3. 600% in the case of the copper (II) salt, and increased by 6. 675% in the case of the mercury (II) salt. Estimate the standard potential of the unknown metal and determine the metal in question.


Given: standard reduction potential of (Hg2+/Hg) and

(Cu2+/Cu)

Answers

By comparing the standard potentials for each reaction, we can estimate the standard potential of the unknown metal and determine the metal in question. To estimate the standard potential of the unknown metal, we need to use the Nernst equation:

[tex]E = Eo - (RT/nF) ln(Q)[/tex]


Where E is the standard potential, [tex]Eo[/tex] is the standard reduction potential, R is the gas constant, T is the temperature, n is the number of moles of electrons transferred, F is the Faraday constant, and Q is the reaction quotient.
First, we need to calculate the change in mass for each of the platinum plates. For the plate dipped in the copper (II) sulphate solution, the change in mass is:
Δ[tex]m = (3.600/100) * m = 0.036 * m[/tex]
For the plate dipped in the mercury (II) sulphate solution, the change in mass is:
Δ[tex]m = (6.675/100) * m = 0.06675 * m[/tex]
Next, we need to calculate the reaction quotient (Q) for each reaction. The reaction quotient is the ratio of the concentrations of the products to the concentrations of the reactants. For the copper (II) sulphate solution, the reaction quotient is:
[tex]Q = [Cu2+]/[Cu][/tex]
For the mercury (II) sulphate solution, the reaction quotient is:
[tex]Q = [Hg2+]/[Hg][/tex]
Now, we can plug these values into the Nernst equation to estimate the standard potential of the unknown metal. For the copper (II) sulphate solution:
[tex]E = Eo - (RT/nF) ln(Q)\\= Eo - (RT/nF) ln([Cu2+]/[Cu]) \\= Eo - (RT/nF) ln(0.036)[/tex]
For the mercury (II) sulphate solution:
[tex]E = Eo - (RT/nF) ln(Q) \\= Eo - (RT/nF) ln([Hg2+]/[Hg]) \\= Eo - (RT/nF) ln(0.06675)[/tex]

We can estimate the standard potential of the unknown metal and identify it by comparing the standard potentials for each reaction.

For more question on Nernst equation click on

https://brainly.com/question/30080689

#SPJ11

The equation below represents a chemical reaction that occurs in living cells.
C6H12O6 + 6O2 ------> 6CO2 + 6H2O + energy

The reactants contain a total of _____?
atoms.

Answers

Answer:

36 atoms

Explanation:

The reactants in the equation contain 6 carbon atoms, 12 hydrogen atoms, and 18 oxygen atoms. So the total number of atoms in the reactants is:

6 (carbon atoms) + 12 (hydrogen atoms) + 18 (oxygen atoms) = 36 atoms

draw lewis dot structures for each of the following molecules. then identify each electron group and molecular geometries g

Answers

To draw the Lewis dot structure for each of the molecules, start by counting the total number of valence electrons. Each atom has its own specific number of valence electrons, which can be found on the periodic table. Once the total valence electrons are counted, arrange the atoms to create a skeletal structure. Then, add electrons to each atom, beginning with the central atom, until all of the valence electrons are used.


The electron group geometry can be determined by counting the number of electron groups around the central atom. These electron groups can be single bonds, double bonds, lone pairs, or other molecules. The molecular geometry is the shape of the molecule based on the positions of the atoms in the structure.


Once the Lewis dot structure is drawn and the electron groups and molecular geometry are identified.

Know more about electron groups here:

https://brainly.com/question/16661930

#SPJ11

Two elements, and , combine to form two binary compounds. In the first compound, 23. 3 g of combines with 3. 00 g of. In the second compound, 7. 00 g of combines with 4. 50 g of. Show that these data are in accord with the law of multiple proportions. If the formula of the second compound is , what is the formula of the first compound?

Compound I:

Answers

The formula for the first Compound I is likely A2B, or O2N.

To show that the data are in accordance with the law of multiple proportions, we need to calculate the ratios of the masses of element B that combine with a fixed mass of element A in each compound. If these ratios are in simple whole-number ratios, then the law of multiple proportions is upheld.

For Compound I:

Mass of A (23.3 g) / Mass of B (3.00 g) = 7.77

For Compound II:

Mass of A (7.00 g) / Mass of B (4.50 g) = 1.56

These ratios are not equal, indicating that the two compounds have different ratios of A and B. However, we can simplify the ratio for Compound II by dividing both masses by the mass of B:

Mass of A (7.00 g / 4.50 g) = 1.56

This suggests that Compound II has a 2:3 ratio of A to B.

Using this information, we can determine the formula of Compound II. Let x be the atomic mass of A and y be the atomic mass of B:

(2x) + (3y) = 4.50 g

Solving for y gives us y = 1.00 g/mol. Since the formula of Compound II is AB2, we know that the atomic mass of A is 2 g/mol. Therefore, A is likely oxygen (atomic mass 16 g/mol).

For Compound I, we know that A is oxygen (atomic mass 16 g/mol). Using the same approach as above, we can determine that B has an atomic mass of 14 g/mol. Therefore, the formula for Compound I is likely A2B, or O2N.

For such more questions on Law of multiple proportions

https://brainly.com/question/13446182

#SPJ4

Why does the Inner Core remain a solid ball of metal?

Answers

The inner core of earth remains a solid ball of metal due to the immense pressure it experiences from the layers above it.

The inner core is made up of mostly iron and nickel and is the hottest part of the Earth, with temperatures reaching up to 5,400°C (9,800°F). However, despite the high temperatures, the inner core remains solid due to the immense pressure from the weight of the outer core, mantle, and crust above it.

This pressure is so great that it prevents the inner core from melting and keeps it in a solid state. Additionally, the inner core is also believed to be slowly growing as the outer core cools and solidifies onto it.

This growth is thought to contribute to the Earth's magnetic field, which is generated by the movement of molten metal in the outer core.

For more question on inner core of earth click on

https://brainly.com/question/7038352

#SPJ11

is the diamond cubic structure close-packed? explain your rationale. note: a close-packed structure is one where you can find a plane of atoms in that structure where all the atoms touch. for example, fcc and hcp are close- packed structures.

Answers

Yes, the diamond cubic structure is close-packed. In a close-packed structure, you can find a plane of atoms where all the atoms touch. To understand why the diamond cubic structure is close-packed, follow these steps:

1. Identify the structure: The diamond cubic structure consists of two interpenetrating face-centered cubics (fcc) lattices with a relative shift of 1/4 along the space diagonal.

2. Locate the planes: In the diamond cubic structure, there are several planes where atoms touch each other, forming a hexagonal close-packed (hcp) arrangement. For instance, the (111) plane in one of the fcc sublattices is close-packed.

3. Examine neighboring atoms: In these close-packed planes, the atoms are arranged so that each atom touches its neighboring atoms. This close arrangement of atoms maximizes the packing efficiency.

So, based on the presence of close-packed planes and the neighboring atoms touching each other, the diamond cubic structure is considered a close-packed structure.

Learn more about packed structures in solids: The close packing of particles in solids results in https://brainly.com/question/22235247

_________________________________ are scientists who study the processes that make cells work.

Answers

Answer:

Microbiologists

Explanation:

Microbiologists are scientists who study the processes that make cells work.

An excess of sodium carbonate, Na2CO3, in solution is added to a solution containing 19. 25 g CaCl2. After performing the experiment, 11. 13 g of calcium carbonate, CaCO3, is produced. Calculate the percent yield of this reaction

Answers

From the balanced equation above,
111 g of CaCl₂ reacted to produce 100 g of CaCO₃
Next, we shall determine the theoretical yield of of CaCO₃. This can be obtained as follow:
From the balanced equation above,
111 g of CaCl₂ reacted to produce 100 g of CaCO₃.
Therefore,
15.71 g of CaCl₂ will react to produce = = 14.15 g of CaCO₃.
Thus, the theoretical yield of of CaCO₃ is 14.15 g
Finally, we shall determine the percentage yield. This can be obtained as follow:
Actual yield of CaCO₃ = 13.19 g
Theoretical yield of CaCO₃ = 14.15 g
Percentage yield =?

= 93.2%
Therefore, the percentage yield of the reaction is 93.2%

Potassium nitrate (KNO;) decomposes on heating to give potassium nitrite (KNO.) and oxygen (02).
When 4.04 g of KNOs is heated, 3.40 g of KNOz is produced
Use the law of conservation of mass to work out the mass of 0, produced.?

Answers

2.02 g mass of oxygen are produced during the decomposition of 4.04 g of potassium nitrate.

Law of conservation of mass calculation.

According to the law of conservation of mass, the total mass of the reactants in a chemical reaction is equal to the total mass of the products. Therefore, we can use this law to determine the mass of oxygen produced in the decomposition of potassium nitrate.

Let's assume that x grams of oxygen (O2) are produced during the decomposition of 4.04 g of potassium nitrate (KNO3). The balanced chemical equation for the decomposition of KNO3 is:

2 KNO3 --> 2 KNO2 + O2

From the equation, we can see that 2 moles of KNO3 produce 1 mole of O2. We can use this information to set up a proportion to solve for x:

2 mol KNO3 / 1 mol O2 = 4.04 g KNO3 / x g O2

Solving for x, we get:

x = (1 mol O2 / 2 mol KNO3) x (4.04 g KNO3) = 2.02 g O2

Therefore, 2.02 g of oxygen are produced during the decomposition of 4.04 g of potassium nitrate using law of conservation of mass.

Learn more on law of conservation of mass below.

https://brainly.com/question/1992248

#SPJ1

Instead of using hcl to standardize naoh a student used potassium hydrogen phthalate, khc8h4o4 which has a molar mass of 204 g/mole. It required 32. 46 ml of naoh to titrate 1. 45 g of khc8h4o4 to a pale pink endpoint, what is the molarity of the naoh? khc8h4o4 + naoh -> k^+ + na^+ + c8h4o4 2-+ h2o

Answers

the molarity of the NaOH solution is 0.219 M (to three significant figures).

The balanced chemical equation for the reaction between NaOH and KHC8H4O4 is:

KHC8H4O4 + NaOH → KNaC8H4O4 + H2O

The stoichiometry of the reaction indicates that 1 mole of KHC8H4O4 reacts with 1 mole of NaOH.

The molecular weight of KHC8H4O4 is 204 g/mol, and the mass of KHC8H4O4 used in the titration is 1.45 g. Therefore, the number of moles of KHC8H4O4 used in the titration is:

n(KHC8H4O4) = mass/molar mass = 1.45 g / 204 g/mol = 0.007107 moles

The volume of NaOH used in the titration is 32.46 mL, or 0.03246 L.

Therefore, the molarity of NaOH can be calculated as:

Molarity = moles of NaOH / volume of NaOH

Since 1 mole of KHC8H4O4 reacts with 1 mole of NaOH, the number of moles of NaOH used in the titration is also 0.007107 moles.

Molarity = 0.007107 moles / 0.03246 L = 0.219 M

learn more about molarity here:

https://brainly.com/question/8732513

#SPJ4

11. Which one of the following contains the same number of atoms as 7 g

of iron?

(a) 4 g of aluminium (b) 4g of magnesium (C) 4g of sulphur

(d) 3 g of carbon (e) 4 g of calcium

Answers

Answer:

4 grams of sulfur contains the same number of atoms as 7 g of iron

Explanation:

The statement "same number of atoms" is the same as stating "the same numer of moles."  Moles are a count of atoms/molecules/etc.

So let's convert the masses into moles.  Take the mass of an element and divide that by its molar mass (g/mole) to obtain moles of that element.

See the attached worksheet for these calculations.

The 7 grams of iron represents 0.125 moles of iron.  The worksheet tells us that 4 grams of sulfur is also 0.125 moles.  Nothing else has that number.  

7 g of iron contains the same number of atoms as 4 grams of sulfur.

 [1 mole = 6.02x10^23 particles].

Predict whether each of the following reactions will occur in aqueous solutions. If you predict a reaction will occur, state the products formed and their states (s, l, or aq) and write a balanced chemical reaction. If you predict that a reaction will not occur, state your reasoning. Note: barium sulfate and silver bromide are insoluble salts.

a. Sodium hydroxide(aq) + ammonium sulfate(aq)
b. Niobium(V) sulfate(aq) + barium nitrate(aq)

Answers

a. Sodium hydroxide(aq) + ammonium sulfate(aq) will react to form solid ammonium hydroxide and sodium sulfate(aq). b. Niobium(V) sulfate(aq) + barium nitrate(aq) will react to form solid barium sulfate(s) and niobium(V) nitrate(aq).

What is the significance of predicting whether a reaction will occur in aqueous solution?

Predicting whether a reaction will occur in aqueous solution is important in understanding chemical reactions and their potential outcomes. It allows chemists to determine what products will form and whether a reaction is feasible or not based on the solubility of the reactants and products.

How do you predict whether a reaction will occur in aqueous solution?

To predict whether a reaction will occur in aqueous solution, one can use solubility rules to determine whether the products of the reaction will form an insoluble precipitate or remain in solution. If a precipitate forms, it indicates that a reaction has occurred, whereas if all the products remain in solution, the reaction will not occur. Additionally, one can use other chemical principles, such as redox reactions and acid-base reactions, to predict whether a reaction will occur.

Learn more about "Sodium hydroxide" here:

https://brainly.com/question/29327783

#SPJ1

If 100. mL of carbon disulfide (density=1.26 g/mL) is burned completely, how many liters of SO2 and of CO2 are formed

Answers

When 100 mL of carbon disulfide is burned completely, we get 37.02 L of CO2 and 74.14 L of SO2 at STP.

What is STP?

STP stands for Standard Temperature and Pressure. It is defined as a temperature of 0 degrees Celsius (273.15 K) and a pressure of 1 atmosphere (or 101.325 kPa). STP is used as a reference point for many thermodynamic calculations and is often used to compare gas volumes under standardized conditions.

The balanced equation for the combustion of carbon disulfide (CS2) is:

CS2 + 3O2 → CO2 + 2SO2

From the equation, we can see that for every mole of CS2 burned, we get one mole of CO2 and two moles of SO2.

To find the moles of CS2 in 100. mL, we need to convert the volume to mass using the density of CS2:

mL x (1.26 g/mL) = 126 g

The molar mass of CS2 is 76.14 g/mol, so the number of moles of CS2 is:

126 g / 76.14 g/mol = 1.655 mol

Therefore, we will get:

1.655 mol CO2 and 2 x 1.655 = 3.31 mol SO2

To convert these values to volume at standard temperature and pressure (STP), we can use the conversion factor:

1 mol of any gas at STP occupies 22.4 L

So:

1.655 mol CO2 x 22.4 L/mol = 37.02 L CO2

3.31 mol SO2 x 22.4 L/mol = 74.14 L SO2

Learn more about STP from given link

https://brainly.com/question/2783971

#SPJ1

PLEASE HELP
It's for Modeling Electron Configurations

Answers

The valence electrons of oxygen are; 2s2 2p4

The valence electrons of nitrogen are 2s2 2p3

This is how we can be able to know the number of valence electrons.

What are the valence electrons of Nitrogen and oxygen?

Valence electrons are the electrons in the outermost shell of an atom. They are the electrons involved in chemical reactions and bonding with other atoms. In the case of nitrogen, its electron configuration is 1s^2 2s^2 2p^3, which means it has two electrons in the first shell, two electrons in the second shell, and three electrons in the outermost p orbital, giving it a total of 5 valence electrons.

Oxygen has an electron configuration of 1s^2 2s^2 2p^4, which means it has two electrons in the first shell, two electrons in the second shell, and four electrons in the outermost p orbital, giving it a total of 6 valence electrons.

Learn more about valence shell:https://brainly.com/question/2725863

#SPJ1

To earn full credit for your answers, you must show the appropriate formula, the correct substitutions , and your answer including the correct units.

In 2013, there were 2.6 x 106 people living in Paris. If 7.34 x 104 babies were born what was the crude birth rate?

Answers

The birth rate is  28.2 births per year

What is the birth rate?

The number of births per 1,000 persons in a particular population over a given time period is commonly used to determine the birth rate.

The following is the formula that can be used to calculate the birth rate:

(Number of births / Population) x 1,000 is the birth rate.

The birth rate can be obtained from;

Birth rate = (Number of births / Population) x 1,000

We know that the birth rate can be obtained from;

7.34 x 10^4 / 2.6 x 10^6  * 1000

= 28.2 births per year

Learn more about birth rate:brainly.com/question/14148819

#SPJ1

Copper react with oxygen to form two oxide x and y , on analysis 1. 535g of x yielded 1. 160g of copper so deter

mine the chemical formula of x and y

Answers

Copper reacts with oxygen to form two oxides, x and y; 1. 535g of x yielded 1. 160g of copper in analysis.the chemical formula of x and y is Cu2O3.

the amount of oxygen in oxide is

1.535 g of oxide x contains 1.160 g of copper.

Therefore, the mass of oxygen in oxide x is:

1.535 g - 1.160 g = 0.375 g

moles of oxygen = 0.375 g / 16.00 g/mol = 0.0234 mol

moles of copper = 1.160 g / 63.55 g/mol = 0.0182 mol

Now, we can divide both moles by the smaller one to get the mole ratio:

0.0234 mol / 0.0182 mol = 1.28

0.0182 mol / 0.0182 mol = 1.00

total mass of copper and oxygen in both oxides = 1.535 g + unknown mass of oxide y

Mass of oxygen in oxide y = mass of copper and oxygen in both oxides - mass of copper in oxide x

mass of oxygen in oxide y = (1.535 g + unknown mass of oxide y) - 1.160 g

mass of oxygen in oxide y = 0.375 g + unknown mass of oxide y

mass of oxide y = 1.535 g - 0.375 g = 1.160 g

oxide y has a mass of 1.160 g. Since the total mass of copper and oxygen in oxide y is the same as in oxide x, the formula for oxide y is Cu2O3.

learn more about moles here:

https://brainly.com/question/28239680

#SPJ4

1- Give an example of gas in liquid solution.

2- Give an example of solid in soild solution.

3-Give an example of gas in gas solution.


Answers

Answer:

1- Oxygen in water

2- Brass, bronze and sterling silver

3- Air

-. A 100.0 g Chunk of Aluminum with an Initial Temperature of 450.0 C° is added to 100.0
mL of Ethyl Alcohol with an Initial Temperature of 80.0 C° (A) Calculate Equilibrium
Temperature of the Mixture (B) Calculate the Heat Exchange of the System
BA) 198 C° B) 22770 J All answers Approx
D A) 110C° B) 10000 J All answers Approx
A) 150 C° B) 30000 J All answers Approx
A) 300 C° B) 15000 J All answers Approx

Answers

The negative sign means that heat was transferred from the aluminium piece to the ethyl alcohol. Consequently, the heat exchange of the system is roughly -22,770 J, or -2.28 x 10^4 J (to 2 significant figures).

What happens when 100g of 100 C boiling water is introduced to a calorimeter?

The mixture's temperature rises to 20 C. The mixture in the calorimeter is then dipped into by a metallic block of mass 1 kilogramme at 10°C. The temperature rises to 19 C once thermal equilibrium has been reached.

Q = m * c * T, where Q is the heat exchanged, m is the mass of the substance, c is the specific heat capacity, and T is the change in temperature, is the formula used to determine the heat exchanged.

We can use the following formula to determine the equilibrium temperature:

m_al * c_al * (T_eq - T_al) = m_et * c_et * (T_et - T_eq)

By entering the specified values, we obtain:

(0.100 kg) * (0.902 J/g°C) * (T_eq - 450.0°C) = (0.100 kg) * (2.44 J/g°C) * (80.0°C - T_eq)

Simplifying, we get:

90.2 J/C * (T_eq - 450.0) = 244 J/C * (80.0 - T_eq)

90.2 T_eq - 40590 = 19520 - 244 T_eq

334.2 T_eq = 60110

T_eq ≈ 179.7°C ≈ 180°C (to the nearest 10°C)

As a result, the mixture's equilibrium temperature is roughly 180 °C.

(B) We can apply the same formula as before to determine the system's heat exchange. We can suppose that the mixture has a specific heat capacity equal to that of ethyl alcohol.

Q = m_al * c_al * (T_eq - T_al) + m_et * c_et * (T_eq - T_et)

Plugging in the given values, we get:

Q = (0.100 kg) * (0.902 J/g°C) * (180.0°C - 450.0°C) + (0.100 kg) * (2.44 J/g°C) * (180.0°C - 80.0°C)

Q ≈ -22,770 J ≈ -2.28 x 10⁴ J (to 2 significant figures)

To know more about ethyl alcohol visit:-

https://brainly.com/question/29153788

#SPJ1

H2 hydrogen filled balloon took 28. 4 hours to go flat. How long would it have taken for helium balloon to go flat?

Answers

Without knowing more about the individual balloon and its surroundings, it is impossible to estimate the precise amount of time it would take for a helium-filled balloon to deflate.

Nonetheless, based on helium's general characteristics and its slower rate of diffusion than hydrogen, we would anticipate that a helium-filled balloon will outlast a hydrogen-filled balloon under comparable circumstances.

Generally, the helium gas diffuses slowly as compared to the hydrogen gas and that's why many ballon these days are filled with helium gas. Helium gas has the larger atomic size and lower solubility in many materials.

To estimate the time it would take for a helium-filled balloon to go flat, we can use the same basic formula that governs the diffusion of gases through materials.

This formula, known as Fick's law of diffusion, describes the rate at which a gas diffuses through a material as proportional to the concentration gradient of the gas across the material, as well as to a constant known as the diffusion coefficient.

In summary it is very difficult to exactly state the time in which  helium balloon to go flat without knowing the environment and other important factors.

To know more about helium gas -

brainly.com/question/1780577

#SPJ4

5. Sometimes it is hard to keep track of what is happening with redox reactions. Here is a helpful hint. Cathode and Reduction both start with consonants. Anode and Oxidation both start with vowels. Reduction happens at the cathode, oxidation occurs at the anode.
Identify which of the half-reactions below occur at the cathode (C) and which occur at the anode (A). Circle the correct letter.

Pb + SO42- → PbSO4 + 2 e- C A
2 MnO2 + 2 H+ → Mn2O3 + H2O C A
Cu → Cu2+ + 2 e- C A
2 H+ + 2e- → H2 C A

Answers

Pb + SO42- → PbSO4 + 2 e-, Reduction occurs at the cathode, so the answer is C. 2 MnO2 + 2 H+ → Mn2O3 + H2O, Oxidation occurs at the anode, so the answer is A. Cu → Cu2+ + 2 e-, Reduction occurs at the cathode, so the answer is C. 2 H+ + 2e- → H2, Reduction occurs at the cathode, so the answer is C.

What is Reduction?

Reduction is a chemical reaction in which an atom, ion, or molecule gains one or more electrons. During a reduction reaction, the oxidation state of the atom or molecule that accepts the electrons becomes more antagonistic or reduced.

What is the role of the anode and cathode?

An anode and a cathode are two electrodes used in various electrochemical devices, such as batteries, fuel cells, and electrolysis cells. The anode and cathode work together to allow electrons to flow between them, creating an electrical current.

To learn more about cathode, visit here:

https://brainly.com/question/4052514

#SPJ1

Other Questions
Somebody please help me with my homework While more recently photography has shifted into the digital realm, this has not really changed how everyday people interact with photosA. True B. Falsesorry i dont know what subject to use its photography The coordinates of the points A and B are (0, 6) and (8, 0) respectively. (i) Find the equation of the line passing through A and B. Given that the line y = x + 1 cuts the line AB at the point MUK (ii) the coordinates of M, (iii) the equation of the line which passes through M and is parallel to the x-axis, (iv) the equation of the line which passes through M and is parallel to the y-axis. A city has cone-shaped buildings for storing salt and sand for icy roads. Eachbuilding has a radius of 30 feet and a height of 20 feet. Find the volume of thebuilding. Use 3.14 for .OA. 1884 ftOB. 18,840 ftOC. 628 ft3OD. 56,520 ft Describe the character of chubhukov as a sensible father describe what happens once the battle resumes. What does Diomedes do? What about Zeus? How does Agamemnon feel? (pgs. 43-45 I got up early and(have) a shower find number of conversion periods and rate of interest when compounded half-yearly for a sum of Rs 5000 is taken for 7 years and 9% p.a HISARNA DEVELOPING A SUSTAINABLE STEEL PRODUCTION PROCESS ABSTRACT The steel industry in Europe was looking for a way to increase the efficiency of steel production and redesign the production process in order reduce emissions to meet the European Unions targets of cutting the emissions by 80-95% of the 1990 levels by 2050. The steel industry formed a consortium along with universities and research organizations to identify technologies to help reduce carbon emissions, ensure energy efficiency, and achieve flexibility in the selection of raw materials in the steel industry. The consortium chose the European unit of India-based steel maker Tata Steel to execute a project to develop new steel making technology. The result was a new steel making technology HIsarna. This was developed and tested in Tata Steels IJmuiden plant in the Netherlands. The case describes the way in which the project was developed, executed, by bringing in different technologies, knowledge, and skills from various stakeholders.Comment on the following aspects of the case study:a) Who are the key stakeholders of the project? (4 Marks) b) What impact could these requested changes have on the steel industry? (1 mark) c) Describe what type of project is this? (3 Marks) d) What is the Scope of this Project? (4 marks)(e) B riefly define the outcome of the Project and how these outcomes might provide value. 1 paragraph (3 Marks).Produce a network diagram based upon the previous duration table in Microsoft Word or Excel using the information from the table, showing the early start, early finish, late start, late finish, slack, critical path and duration of the project.Upload the Microsoft Word file as your answer for this question. 5+5+5=15pts (Quadrics) Let Q=1 be a quadric surface in 3-dimensional affine Euclidean space R^3. (See the list of reduced quadrics given in Lecture 5). Determine which of these quadrics are - regular 2-surfaces; - ruled 2-surfaces. On p.271 of the book, M. Audin mentions that all quadrics appear as ruled surfaces if one allows lines to be imaginary. What does she mean by this statement? what type of planning involves assessing the risks to organizational processes and creating policies, plans, and procedures to minimize the impact those risks might have on the organization if they were to occur? business continuity planning business impact planning risk management planning disaster recovery planning 1. Four plus a number2. Twice Daria's age3. Six times a number plus forty-one4. The sum of a number and 175. The difference between Mary's height and Frank's height6. The quotient of Iquan's age and 47. The product of Arielle's age and 508. Seventy-five increased by a number9. Four hundred decreased by twice a numberEleven ples more than a number10. 11. Twice as many dogs41X12. A number doubled plus ten13. A variable tripled less 4014. Twice the temperature minus 60 degrees15. A number divided by fifteen less than 316. Five more than a number17. Thirty-three less than a number8. Twice Solomon's weight less fifteen pounds3. The difference between sixty and twice a numberD. The factor of a variable and the coefficient four Drag each label to the correct location on the image.Match the government activities to the different fiscal policies.government is spendingless than what it earnsbudget indicates a surplusbudget indicates a deficitgovernment is spendingmore than what it earnsContractionary Fiscal Policygovernment is spending moreon infrastructure developmentExpansionary Fiscal Policy Units of CapacityCustomarySystem Units1 gallon1 quart1 cupMetric System Units3.79 liters0.95 liters0.237 litersSameer usually drinks 3 cups of coffee in the morning.How many liters of coffee does he drink? Round youranswer to the nearest tenth.3 cups1Xnew unitsoriginal unitsSameer drinksmorning.=?=liters of coffee in the Which of the following attributes of McDonalds has contributed to its success?The company discourages people from owning multiple franchises.It focuses on quality, simplicity, and efficiency.It has limited franchising opportunities to the U.S. only.The company does not focus on building relationships with suppliers. Myths about EntrepreneurshipGroup findingEvidence from Uber case"Entrepreneurs are their own bosses and are completely independent"."Entrepreneurs work harder than managers in big firms". Does not earn interest and has a low minimum balance requirement Jermaine spent $204 dollars onshirts for his 21 employees while hewas on his vacation. Large shirtswere $12 and small shirts were $8. How many larges did he buy? there is scanty vegetation in the desert. give reason What are the central teachings of Judaism, and why did they survive to the modern day?