Answer:
In the compond Mg(OH)_2, 20 atoms are present.
Explanation:
Select two correct answers.
[]class
[]organism
[] fungi
[]kingdom
an atom has 10 protons and a mass number of 18 how many neutrons does it contain
Answer:
8 i believe
Explanation:
To see the number of atoms of an element in a given molecule we need to multiply stoichiometry to the number that is written on the foot of the element that is stoichiometry. Therefore, the number of neutrons in the given atom is 8.
What is atom?Atom is the smallest particle of any element, molecule or compound. Atom can not be further divided. Atoms contains nucleus in its center and electron that revolve around the atom in fixed orbit.
In the nucleus, proton and neutron are present. Electron has -1 charge while proton has +1 charge. Neutron is neutral that is it has no charge. So overall the charge of nucleus is due to only proton, not by neutron.
Mass number =number of protons + number of neutrons
Atomic number = number of protons= number of electrons
18 =10 + number of neutrons
number of neutrons=8
Therefore, the number of neutrons in the given atom is 8.
To know more about atom, here:
https://brainly.com/question/13518322
#SPJ2
convert 150 K to degrees F
Answer:
150K is 253.67°F
Explanation:
There is a simple formula to convert from Kelvin to Celsuis;
C° = K - 273.15
C = 150 - 273.15 C = -123.15Then you would convert Celsuis into Fahrenheit using the formula:
[tex]F = \frac{9}{5}C + 32\\[/tex]
[tex]F = \frac{9}{5}(-123.15)+32\\F = 221.67 + 32 \\F = 253.67[/tex]Is it unbalanced or balanced if hydrogen reacts to iodine?
Answer:
unbalanced
Explanation:
because it is REACTing.
3.
What relationship do P and V have at a constant temperature? (Direct or Inverse)
1.
What relationship to V and T have at a constant pressure? (Direct or Inverse)
and please don’t put just a link thx
Answer:
3. Inverse 1. Direct
Explanation:
P- pressure
V - volume
T - temperature
P1*V1 / T1 = P2*V2 / T2 ...... (1)
That's the general gas law with the combined ideas of charles, boyle & lussac.
Whenever you are restricted as "constant" temperature, volume, or pressure...cancel them off of your equation.
in this case 3. is indirectly telling us to cancel the temperature (T).
so we'll be left w P1*V1 = P2*V2
now notice that any relation ship that is multiplied like the one above consists of inversely related quantities. & so we conclude that-
P & V are inversely proportional or have an inverse relationship.
similarly in 1. we'll cancel p off of the general formula (1)
to be left with V1/T1 = V2/T2
also note that quantities involved in division are directly related to each other & hence the answer.
Which description of salt is a physical property?
Answer:
White being the color and coming in small grains.
Explanation:
Physical properties are something you can clearly see about the object.
Answer:
Hey mate......
Explanation:
This is ur answer....
It was in the lesson, the answer is it is solid and does not conduct electricity.
Physical Properties Chemical Properties
White cubic crystals Do not undergo combustion
Odorless, salty taste Make ionic bonds easily
As solids, they do not conduct electricity The product of mixing acids and bases.
Hope it helps!
Brainliest pls!
Follow me! :)
PLEASE…. Select the number line that shows that two opposite numbers have a sum of
0.
3
A.
4321 01 2 3 4 5 6 7 8 9 10 11 12
B.
4 3 2 -1 0 1 2 3 4 5 6 7 8 9 10 11 12
6
С.
-432-10 3 5 6 7 8 9 10 11 12
2
Answer:
C A
Explanation:
The the number line that shows that two opposite numbers have a sum of 0 is 4 3 2 -1 0 1 2 3 4 5 6 7 8 9 10 11 12. The correct option is B.
What is number line?A number line is a picture of a graduated straight line that serves as a visual representation of real numbers in elementary mathematics.
Every point on a number line is assumed to be a real number, and every real number is assumed to be a point.
4 3 2 -1 0 1 2 3 4 5 6 7 8 9 10 11 12
We can see from this number line that the inverse of each number is located at an equal distance from 0.
For example, the inverse of 3 is -3, which is the same distance from 0 as 3. Similarly, the inverse of -1 is 1, which is the same distance from 0 as -1.
Thus, the correct option is B.
For more details regarding number line, visit:
https://brainly.com/question/16191404
#SPJ5
when an atom in an excited state returns to its ground state it
Answer:
Inside the Atom
Just like bricks are the building blocks of a home, atoms are the building blocks of matter. Matter is anything that has mass and takes up space (volume). All matter is made up of atoms. The atom has a nucleus, which contains particles of positive charge (protons) and particles of neutral charge (neutrons). Surrounding the nucleus of an atom are shells of electrons - small negatively charged particles. These shells are actually different energy levels and within the energy levels, the electrons orbit the nucleus of the atom.
Please select the word from the list that best fits the definition
a new energy source found in the ocean that is currently very costly to obtain
nonrenewable resources
renewable resources
methane hydrates
plankton
petroleum
nonliving resources
Answer:renewable resources
Explanation:
Why is the energy supplied by the cooker greater than that calculated in part (a)
Answer:
136000 J or 136 kJ
Explanation:
Formula
Heat = m * c * deltaH
Givens
m= 0.5 kg
c = 3400 J / (kg * oC)
Deltat = (100oC – 20oC)
deltat = 80oC
Solution
Heat = 0.5 kg * 3400 J/(kg* oC) * 80oC
Heat = 136000 Joules
Heat = 136 kg
Technically there is only 1 place of accuracy.
______________ is a durable material and is widely used for casting, which is a process by which the melted material is poured into a mold. A. Bronze c. Copper b. Silver d. Gold Please select the best answer from the choices provided A B C D.
The material that has been widely used in casting has been copper. Thus, option C is correct.
Casting has been the process of molding the liquid into a specific shape with the mold. The casting involves the heating of elements and converting them into liquid. The liquid has been poured into the mold and cooling results in the casted material.
The casted material has been selected based on the boiling temperature, cooling temperature, resistivity, cost-effectiveness, and damping ability.
The material that has been consisted of these characteristics has been copper. Thus, copper has been commonly used for casting. Thus, option C is correct.
For more information about casting, refer to the link:
https://brainly.com/question/1253405
50 PIONTS PLZZZ HELP
What volume of 0.100 M K2S solution contains 3.5 g of the solute?
Answer:
mols solute(K2S) = grams/molar mass = ?
Then M = mols/L. You know M and mols, solve for L.
Explanation:
3.5/0.1
L= 35
Hope this helps!!
Please tell me if I have made a mistake!!
I enjoy learning from them:)
Answer:
0.32L
Explanation:
Use formula of V= wt/mm•M.
To get this information we need to first get the molar mass (mm).
mm:
K - 2 x 39.09
S - 1 x 32.06
K2S - 110.262 g/mol
Now we plug it back into the equation.
3.5g/ (110.262 g/mol) • (0.100M)
= 0.317 L of solution
To round to the correct number of siginficant figures the answer is.
= 0.32 L
Prepare and name an alcohol by using the following reactants
Hex-1-ene and a water molecule write the complete reaction.
Answer:
Alcohol will form at more substituted carbon due to carbocation rearrangement so 2-hexanol
Explanation:
Well if it’s acid catalyzed
2. Write down the position of alkaline earth metal in the Modern periodic table What is their valency?
Answer:
they are in group II and they have two electrons in their outermost energy levels ( valency)...is this helpful?
What are the most important topics for revision in chemistry?
Answer:
structure of atom
states of matter
classification of elements and periodicity in properties
thermody namic
Equilibrium
Redox reacation
What are the names of the two levels?
Select two correct answers.
2. Transfer in energy to reach the highest amount of kinetic energy for both substance B and C.
3. Slowly transfer out energy from each substance. Note the temperature at which each substance changes phase.
Substance B changed to a liquid at
ANSWER: °C.
Substance C changed to a liquid at
ANSWER: °C.
For Science please answer the questions with the word "ANSWER"
4. Based on your observations above, which substance needed a greater decrease in kinetic energy in order to change phase?
The substance with
(medium or low) ANSWER: Pick which one it is!
attraction needed more energy transferred out in order to change phase.
The change in phase of a substance is called a physical change. The substance C with low molecular attraction needs more energy transferred out and thus its kinetic energy have to be decreased to change from gas to liquid.
What is energy transfer?Energy can neither be created nor be destroyed. However it can be transferred from one form to the other and thus total energy of a system is conserved.
In gaseous state molecules or atoms are far apart and have minimum intermolecular forces of attraction whereas in liquid state they have medium molecular attraction and are a bit close than they are in gas state.
When a substance changes from gas state to liquid state its molecules condenses and becomes more close to each other forming higher molecular attraction.
The gas B have medium molecular attraction and thus will easily liquified with minimum energy transfer whereas, gas C is of less molecular attraction having higher kinetic energy and thus more have to transfer more energy out to liquify.
To find more about physical changes, refer the link below:
https://brainly.com/question/17931044
#SPJ5
How many totals atoms are present in the compound : Mg(OH)2
A. 3
B. 4
C. 5
D. 7
1 atom Mg, 2 atoms O and 2 atoms H.
1 + 2 + 2 = 5, so correct answer is C
in which time period did the first animals that could live both in water and on land appear
A teacher wrote the following part of a balanced chemical equation:
2HNO3 + Ca ➡️
To show that chemical reactions conserve matter, how many atoms of hydrogen (H) will there be on the right-hand side of the equation?
A. 3
B. 2
C. 1
D. 6
Answer:
answer is 2
Explanation:
just did the quiz
Hey can anyone pls answer dis in ur own wordssss
Answer: sorry
Explanation:
j
What is the amplitude of the above wave?
Answer:Amplitude in a longitudinal wave
Explanation:Wave amplitude of a longitudinal wave is the distance between particles of the medium where it is compressed by the wave. Wave amplitude is determined by the energy of the disturbance that causes the wave. A wave caused by a disturbance with more energy has greater amplitude.
If you wanted to make a crucible for melting sodium (Na), which metal would be most suitable for that purpose
To make a crucible for melting sodium (Na), metals that would be most suitable for that purpose are inert metals or metals like alumina.
What are inert metals?inert metals are those metals that do not react with other highly reactive metals or in the atmosphere due to the absence of one free electron in the outermost orbital.
The sodium metal is kept in the crucible of the inert metal like alumina because sodium has one free electron in the outer shell and catches fire as come into the contact with the air.
Therefore, to make a crucible for melting sodium (Na), metals that would be most suitable for that purpose are inert metals or metals like alumina.
Learn more about inert metal, here:
https://brainly.com/question/14546209
#SPJ6
Element of group 2 loses two electrons in the process of a chemical combustion. what is the ionic charge? +2 or -2
3 examples of how you think cells work in living things.
Answer:
Cells help the human body in many ways, Red or white blood cells are very important and are commonly spoken when bringing up cells. Plants have cells as well plant cells have special organelles called chloroplasts, which create sugars also known as photosynthesis.
Explanation:
idrk if that helped much-
molecules diffusing with the concentration gradient through a protein channel is
Answer:
Molecules move up the concentration gradient in facilitated diffusion which requires ATP to be used as molecules naturally move from high to low concentration
Explanation:
What is the percent of O in
CO2?
(C = 12.01 amu, O = 16.00 amu)
[? ]%
Answer:
show me a pic?? then I'll lyk
The density of iron is 7.0 g/cm'. What volume of iron would have a mass of 14.0 g?
Answer:0.284ib/in 3
Explanation:
[tex]\text{Given that,}\\\\\text{Density of iron, }~ \rho = 7 ~\text{g cm}^{-3} = 7 \times 10^{3}~ \text{kg m}^{-3}\\\\\\\text{Mass, m =14 g =} ~ 14 \times 10^{-3} ~\text{kg}\\\\\\\text{Volume of iron,}~ V = \dfrac{m}{\rho} = \dfrac{14 \times 10^{-3}}{7\times 10^{3}} = 2 \times 10^{-6} ~~ m^3[/tex]
What mass of sugar and water is needed to make 40 g of 10% solution?
10 g of sugar to 40g of water the solution becomes 50 g.
_________________________________________
= 10 / 50 * 100
= 20 %
_____________
Percentage of the sugar solute = Mass of solute / Mass of solution * 100
how do i find the number if electrons in an element
Answer:
by using this formula 2×(n)^२
Answer:
M-A=N
Explanation:
M-A=N
Here is an example.
The equation above means that the atomic number (A) subtracted from the average atomic mass (M) equals the combined amount of neutrons and protons. Since we know that 35 17Cl is Chlorine (this is because Chlorine (Cl) is the 17th number on the periodic table and has the average atomic mass of 35), we can insert our data into the equation and end up with the following:
35-17=18.
From here, we can tell that we have a mix of neutrons and protons, with the total being 18. Since the atomic number is 17, we can reasonably assume that there are 17 protons and 1 neutron.
But we still need to find the number of electrons. Fortunately, the number of electrons is always equivilant to the number of protons and the atomic mass, so we know that the number of electrons is 17.
So, we have;
17 Protons
1 Neutron
17 Electrons