252,212 Joules of energy are required to heat 100g of water from 35°C to 115°C water vapor.
To calculate the amount of energy required to heat water from 35°C to 100°C, we use the specific heat capacity of water, which is 4.18 J/(g°C). This means that it takes 4.18 Joules of energy to heat one gram of water by one degree Celsius.
So, the energy required to heat 100 g of water from 35°C to 100°C can be calculated as follows:
Q1 = m × c × ΔT
Q1 = 100 g × 4.18 J/(g°C) × (100°C - 35°C)
Q1 = 26,212 Joules
Next, we need to calculate the amount of energy required to vaporize the water at 100°C. This is done using the heat of vaporization of water, which is 2260 J/g.
So, the energy required to vaporize 100 g of water at 100°C is:
Q2 = m × Lv
Q2 = 100 g × 2260 J/g
Q2 = 226,000 Joules
Therefore, the total energy required to heat 100 g of water from 35°C to 115°C water vapor is:
Q = Q1 + Q2
Q = 26,212 Joules + 226,000 Joules
Q = 252,212 Joules
Thus, 252,212 Joules of energy are required to heat 100g of water from 35°C to 115°C water vapor.
learn more about energy here
https://brainly.com/question/13881533
#SPJ1
Which of the following represents beta decay
OA. Tc-TC+y
O B.
B. 14Gd→ 144Sm+ He
O C. 160Eu+e→ 169 Sm
62
O D.
D.
63
164Gd→ ¹6 Tb + e
160
65
The correct answer that represents beta decay is
D. 164Gd → 164Tb + e, What happens in beta decayIn beta decay, a neutron in the nucleus is converted into a proton, and an electron (or beta particle) and an antineutrino are emitted from the nucleus.
In this case, a neutron in the 164Gd nucleus is converted into a proton, and an electron is emitted from the nucleus, resulting in the production of 164Tb.
Option A is not a valid representation of any known type of radioactive decay.
Option B represents alpha decay, in which an alpha particle is emitted from the nucleus.
Option C represents electron capture, in which an electron is captured by the nucleus.
Learn more about beta decay at
https://brainly.com/question/27770519
#SPJ1
The Ka value for ethanoic acid, CH3COOH is 1.79 x 10-5. What is the pH of an equimolar solution of ethanoic acid and Na+CH3COO-?
The pH of the solution can be calculated using the following steps:
Write the chemical equation for the dissociation of ethanoic acid:
CH3COOH + H2O ⇌ CH3COO- + H3O+
Write the equilibrium expression for the dissociation of ethanoic acid:
Ka = [CH3COO-][H3O+] / [CH3COOH]
Since the solution is equimolar in CH3COOH and CH3COO-, we can assume that the initial concentrations of CH3COOH and CH3COO- are equal. Let's use the variable x to represent the concentration of CH3COO- and CH3COOH in mol/L.
[CH3COOH] = x mol/L [CH3COO-] = x mol/L
Since CH3COOH is a weak acid, we can assume that only a small fraction of it dissociates in water. Let's use the variable y to represent the concentration of H3O+ ions in mol/L that are produced from the dissociation of CH3COOH. From the dissociation of ethanoic acid, we know that [CH3COO-] = [H3O+].
[CH3COO-] = y mol/L [H3O+] = y mol/L
Use the equilibrium expression to solve for the concentration of H3O+ ions:
Ka = [CH3COO-][H3O+] / [CH3COOH] 1.79 x 10^-5 = y^2 / x
Solving for y in terms of x, we get:
y = sqrt(Ka * x)
Calculate the pH of the solution using the equation:
pH = -log[H3O+]
pH = -log(y)
Substituting in the value of y from Step 5, we get:
pH = -log(sqrt(Ka * x))
Simplifying, we get:
pH = -0.5 * log(Ka * x)
Substituting in the value of Ka, we get:
pH = -0.5 * log(1.79 x 10^-5 * x)
Now we can calculate the pH for the solution by substituting the value of x as it is equimolar.
pH = -0.5 * log(1.79 x 10^-5 * x)
pH = -0.5 * log(1.79 x 10^-5 * 1)
pH = -0.5 * log(1.79 x 10^-5)
pH = 4.74
Therefore, the pH of an equimolar solution of ethanoic acid and Na+CH3COO- is 4.74.
20. Calculate the mole fractions (X) of each compound in each of the following solutions:
a. 19.4 g of H2SO4 in 0.251 L of H20 (density of water is 1.00 g/mL)
b.35.7 g of KBr in 16.2 g of water
C.233 g of CO2 in 0.409 L of water
[tex]CO_{2}[/tex]The following compounds' mole fractions (X) are (a)0.986 (b)0.750 (c)0.811 for the given solutions.
How can the mole fraction of 19.4 g of H2SO4 in 0.251 L of water be determined?[tex]H_{2}SO_{4}[/tex] mass is 19.4 g.
[tex]H_{2}SO_{4}[/tex]'s molecular weight is 98.08 g/mol.
It's molecular weight is 19.4 g/98.08 g/mol, or 0.1979 mol.
Density times volume is 1.00 g/mL times 0.251 L and 251 g for water mass.
[tex]H_{2} O[/tex] has a molecular weight of 18.02 g/mol.
Water moles are equal to 251 g / 18.02 g/mol, or 13.93 mol.
The solution's total moles are equal to 0.1979 mol plus 13.93 mol, or 14.13 mol.
Sulphuric Acid's mole fraction is equal to 0.1979 mol/14.13 mol, or 0.014.
Water mole fraction is equal to 13.93 mol / 14.13 mol, or 0.986 mol.
How can the mole fraction of 35.7 g of KBr in 16.2 g of water be determined?KBr's mass is 35.7 g.
KBr has a molecular weight of 119 g/mol.
The formula for KBr is 35.7 g/119 g/mol, which equals 0.300 mol.
16.2 g of water in mass
Water has a molecular weight of 18.02 g/mol.
Water moles are equal to 16.2 g / 18.02 g/mol, or 0.899 mol.
The solution has a total of 1.199 moles (0.300 mol + 0.899 mol).
The mole fraction of KBr is equal to 0.300 mol/1.199 mol, or 0.250
Water mole fraction is equal to 0.899 mol / 1.199 mol, or 0.750 moles.
How can the mole fraction of 233 g of CO2 in 0.409 L of water be determined?[tex]CO_{2}[/tex] mass = 233 g
It has a molecular weight of 44.01 g/mol.
Its moles are equal to 233 g / 44.01 g/mol, or 5.291 mol.
Water volume equals 0.409 L.
Water has a molecular weight of 18.02 g/mol.
(density × volume) / molecular weight (1.00 g/mL 409 mL) / 18.02 g/mol = 22.71 mol = number of moles of water
The solution's total moles are equal to 5.291 mol plus 22.71 mol, or 28.00 mol.
[tex]CO_{2}[/tex] mole fraction = 5.291 moles / 28.00 moles = 0.189
[tex]H_{2} O[/tex] mole fraction is 22.71 mol/28.00 mol, or 0.811 moles.
To learn more about mole fraction visit:
brainly.com/question/29808190
#SPJ9
9) For the balanced equation (with hypothetical
2A + 3B
[B] (mol/L)
0.100
0.100
0.200
Exp#
1
2
3
[A](mol/L)
0.100
0.200
0.100
a. What is the order for each reactant?
b. What is the overall order for the reaction?
C + 4D
initial rate (M/sec)
0.022
0.176
0.044
The order for reactant A is 2 and the order for reactant B is 1. For the first reaction, the overall order of the reaction is 3 and for the second reaction, the overall order of the reaction is 5.
What is the order of a reaction?The order of a reaction is the sum of the exponents in the rate law expression that relates the rate of a chemical reaction to the concentrations of the reactants.
To determine the order of each reactant, we need to compare the initial rates of reaction at different concentrations while keeping the concentration of the other reactant constant.
For reactant A:
Exp#1 (0.100 M A, 0.100 M B): initial rate = k(0.100)^2(0.100) = 0.001 k
Exp#2 (0.200 M A, 0.100 M B): initial rate = k(0.200)^2(0.100) = 0.004 k
Exp#3 (0.100 M A, 0.200 M B): initial rate = k(0.100)^2(0.200) = 0.002 k
We can see that when the concentration of A doubles (Exp#1 to Exp#2), the initial rate quadruples, which indicates that A is second order. When the concentration of B doubles (Exp#1 to Exp#3), the initial rate doubles, which indicates that B is first order.
Therefore, the order for reactant A is 2 and the order for reactant B is 1.
To determine the overall order of the reaction, we add the orders of the reactants:
Overall order = 2 (order of A) + 1 (order of B) = 3
Therefore, the overall order of the reaction is 3.
For the second reaction, we can see that the rate depends on the concentration of both reactants, and we cannot determine their individual orders without further information or experiments. However, we can determine the overall order of the reaction by adding the exponents of the concentration terms in the rate law:
Overall order = 1 + 4 = 5
Therefore, the overall order of the reaction is 5.
Learn more about order here:
https://brainly.com/question/13467963
#SPJ1
Calculate the density of Sulfur dioxide gas at a temperature of 15oC and pressure of 300 torr. Convert to atm
The density of sulfur dioxide gas at a temperature of 15°C and pressure of 300 torr is 0.001022 g/cm³, or 0.001022 g/mL, or 1.022 kg/m³, or 0.01022 g/L when converted to atm.
What is density?
To calculate the density of sulfur dioxide gas at a temperature of 15°C and a pressure of 300 torr, we can use the ideal gas law:
PV = nRT
where P is the pressure in atmospheres, V is the volume in liters, n is the number of moles, R is the ideal gas constant (0.08206 L·atm/(mol·K)), and T is the temperature in Kelvin.
First, we need to convert the given temperature of 15°C to Kelvin:
T = 15°C + 273.15 = 288.15 K
Next, we can rearrange the ideal gas law to solve for the number of moles:
n = PV/RT
where we can use the given pressure of 300 torr and convert it to atm by dividing by 760 torr/atm:
P = 300 torr / 760 torr/atm = 0.3947 atm
Substituting the values into the equation, we get:
n = (0.3947 atm) V / (0.08206 L·atm/(mol·K) × 288.15 K)
Now, we can use the molar mass of sulfur dioxide, which is 64.06 g/mol, to convert the number of moles to mass:
mass = n × molar mass
Finally, we can calculate the density of sulfur dioxide gas using the mass and volume:
density = mass / V
To convert the density from g/L to g/cm³, we divide by 1000.
Putting it all together, we get:
n = (0.3947 atm) V / (0.08206 L·atm/(mol·K) × 288.15 K)
n = 0.01595 V
mass = n × molar mass = 0.01595 V * 64.06 g/mol = 1.022 gV
density = mass / V = 1.022 gV / V = 1.022 g/L = 0.001022 g/cm³
Therefore, the density of sulfur dioxide gas at a temperature of 15°C and pressure of 300 torr is 0.001022 g/cm³, or 0.001022 g/mL, or 1.022 kg/m³, or 0.01022 g/L when converted to atm.
To know more baout density, visit:
https://brainly.com/question/25925922
#SPJ1
Complete question is: The density of Sulfur dioxide gas at a temperature of 15oC and pressure of 300 torr is 0.01022 atm.
If the volume of a gas at -40°C is double to 80 L what is the final temperature in degrees Celsius?
The final temperature is -160°C
To solve this problemWe can use the combined gas law, which relates the pressure, volume, and temperature of a gas:
(P₁V₁)/T₁ = (P₂V₂)/T₂
Where
P₁, V₁, and T₁ are the initial pressure, volume, and temperature of the gas, and P₂, V₂, and T₂ are the final pressure, volume, and temperature of the gasIn this case, we can assume that the pressure of the gas is constant, since it is not given in the problem statement. So we can simplify the equation to:
(V₁/T₁) = (V₂/T₂)
Where
V₁ and T₁ are the initial volume and temperature V₂ and T₂ are the final volume and temperatureWe are given that the initial volume (V₁) is 80 L and the final volume (V₂) is twice that, or 160 L. We are also given that the initial temperature (T₁) is -40°C. To find the final temperature (T₂), we can plug these values into the equation:
(V₁/T₁) = (V₂/T₂)
(80 L)/(-40°C) = (160 L)/T₂
Simplifying:
-2 L/°C = (160 L)/T₂
Multiplying both sides by -1°C/2 L (the reciprocal of -2 L/°C):
1/2 = (T₂)/(160 L) x (-1°C/2 L)
1/2 = -T₂/320
Multiplying both sides by -1 to isolate T₂:
-1/2 = T₂/320
T₂ = -160°C
Therefore, the final temperature is -160°C.
Learn more about combined gas law here : brainly.com/question/11296079
#SPJ1
Which state of matter - solid, liquid, or gas- tends to have unique factors (different from the other two) to consider when discussing solubility
The state of matter that tends to have unique factors to consider when discussing solubility compared to the other two states (solid and gas) is the liquid state.
Which state has unique factors?Solubility refers to the ability of a substance (solute) to dissolve in a particular solvent to form a homogeneous mixture (solution). Various factors can affect the solubility of a substance, including temperature, pressure, and the nature of the solute and solvent.
In the case of liquids, the unique factor to consider when discussing solubility is often temperature. The solubility of many solid solutes in liquids generally increases with increasing temperature. This is because higher temperatures provide more energy to break the intermolecular forces between solute particles, allowing them to disperse more evenly throughout the solvent.
Learn more about solubility:
https://brainly.com/question/23946616
#SPJ1
Consider the reaction described by the chemical equation shown.
C2H4(g)+H2O(l)⟶C2H5OH(l)Δ∘rxn=−44.2 kJ
Use the data from the table of thermodynamic properties to calculate the value of Δ∘rxn
at 25.0 ∘C.
Δ∘rxn= ? J⋅K−1
Calculate Δ∘rxn.
Δ∘rxn= ? kJ
In which direction is the reaction, as written, spontaneous at 25 ∘C
and standard pressure?
reverse
both
neither
forward
The direction of the reaction, as written, spontaneous at 25 ∘C and standard pressure is reverse.
What is the direction of the reaction?
To calculate the value of Δ∘rxn at 25.0 ∘C, we can use the equation:
Δ∘rxn(T2) = Δ∘rxn(T1) + ΔH∘(products) - ΔH∘(reactants)
where;
T2 is the desired temperature (25.0 ∘C), T1 is the standard temperature (usually 25 ∘C), ΔH∘(products) is the enthalpy change of formation of the products, and ΔH∘(reactants) is the enthalpy change of formation of the reactants.Using the data from the table of thermodynamic properties, we can look up the enthalpy change of formation values for C2H4(g), H2O(l), and C2H5OH(l):
ΔH∘f(C2H4(g)) = 52.26 kJ/mol
ΔH∘f(H2O(l)) = -285.83 kJ/mol
ΔH∘f(C2H5OH(l)) = -277.69 kJ/mol
Substituting these values into the equation, we get:
Δ∘rxn(25.0 ∘C) = -44.2 kJ + (-277.69 kJ/mol) - (-52.26 kJ/mol)
Δ∘rxn(25.0 ∘C) = -44.2 kJ - (-277.69 kJ/mol) + 52.26 kJ/mol
Δ∘rxn(25.0 ∘C) = -44.2 kJ + 277.69 kJ/mol + 52.26 kJ/mol
Δ∘rxn(25.0 ∘C) = 233.23 kJ/mol
So the value of Δ∘rxn at 25.0 ∘C is 233.23 kJ/mol.
In which direction is the reaction, as written, spontaneous at 25 ∘C and standard pressure?
Since the value of Δ∘rxn at 25.0 ∘C is positive (233.23 kJ/mol), the reaction as written is not spontaneous at this temperature and standard pressure. The correct answer is "reverse."
Learn more about enthalpy change here: https://brainly.com/question/16387742
#SPJ1
The isotope Tl-208 undergoes β decay with a half-life of 3.1 min.
What is the decay constant for this process?
a.)
4.47 min⁻¹
b.)
2.15 min⁻¹
c.)
0.224 min⁻¹
d.)
0.031 min⁻¹
The decay constant for this process is
c.) 0.224 min⁻¹How to find the decay constantThe decay constant (λ) is related to the half-life (t1/2) by the following equation:
λ = ln(2) / t1/2
where
ln(2) is the natural logarithm of 2, which is approximately 0.693.
Substituting the given half-life of 3.1 min into the equation, we get:
λ = ln(2) / (3.1 min) ≈ 0.223 min^(-1)
Therefore, the decay constant for the β decay of Tl-208 is approximately 0.223 min^(-1).
Learn more about decay constant at
https://brainly.com/question/12699719
#SPJ1
The volume of a sample of oxygen is 200.0 mL when the pressure is 3.000 atm and the temperature is 37.0 C. What is the new temperature if the volume increases to 400.0 mL and the pressure decreases to 2.000 atm?
Answer:
140.3 *C
Explanation:
(P1 * V1) / T1 = (P2 * V2) / T2
where P1 = 3.000 atm, V1 = 200.0 ml, T1 = 37.0°C + 273.15 = 310.15 K, P2 = 2.000 atm, V2 = 400.0 ml.
Substituting these values into the formula gives:
(3.000 atm * 200.0 ml) / 310.15 K = (2.000 atm * 400.0 ml) / T2
Solving for T2 gives:
T2 = (2.000 atm * 400.0 ml * 310.15 K) / (3.000 atm * 200.0 ml)
T2 ≈ 413 K or 140°C.
For a gaseous reaction, standard conditions are 298 K and a partial pressure of 1 atm for all species.
For the reaction
N2(g)+3H2(g)↽−−⇀2NH3(g)
the standard change in Gibbs free energy is Δ°=−32.8 kJ/mol
. What is ΔG for this reaction at 298 K when the partial pressures are N2=0.350 atm
, H2=0.300 atm
, and NH3=0.750 atm
?
Question 4 of 10
How much energy is required to vaporize 2 kg of gold? Use
the table below and this equation: Q = mLvapor
Substance
Aluminum
Copper
Gold
Helium
Lead
Mercury
Water
Latent Heat
Fusion
(melting)
(kJ/kg)
400
207
62.8
5.2
24.5
11.4
335
Melting
Point
(°C)
660
1083
1063
-270
327
-39
0
Latent Heat
Vaporization
(boiling) (kJ/kg)
1100
4730
1720
21
871
296
2256
Boiling
Point
(°C)
2450
2566
2808
-269
1751
357
100
It requires 10.15 kilojoules of energy.
What is vaporization?The term "vaporisation" (or "evaporation") often refers to the transformation of a liquid's condition into a vapour phase below its boiling point. The phrase, however, can also refer to the process of removing a solvent, independent of the temperature used.
What is energy?When a body moves to exert force, it is said to be exerting work. Energy is the capacity to accomplish work. Energy is something we always need, and it can take many different forms.
If the gold is present in the liquid state, you only have to determine the latent heat of vaporization, or lvap. The empirical data for gold is 330 kJ/mol.
Q = mlvap
Q = (2 kg)(1 kmol/197 kg)(1,000 mol/1 kmol)
Q = 10.15 kJ
It needs an energy of 10.15 kilojoules
To know more about energy visit:
https://brainly.com/question/1932868
#SPJ1
6. What is the pH of a 0.25 M solution of NH4Cl? [Kb(NH3) = 1.8 10–5
The Ammonium Chloride solution at 0.25 M has a pH of 2.67.
Why is the pH of Ammonium Chloride below 7?As a result, the weak basic (Chlorine) in the solution is overpowered by the conjugate acid (Ammonium cation), making the solution mildly acidic. According to the equation pH =log[Hydrogen ion], an acidic solution has a pH lower than 7. Aqueous ammonium chloride solution has a pH that is less than 7.
Ammonium cation + Water ⇌ Nitrogen trihydride + Hydronium ion
Kb = [Nitrogen trihydride][Hydronium ion] / [Ammonium cation]
[Nitrogen trihydride] = [Hydronium ion] = x
[Ammonium cation] = 0.25 - x
Kb = [Nitrogen trihydride][Hydronium ion] / [Ammonium cation]
1.8 × 10–5 = x² / (0.25 - x)
1.8 × 10–5 = x² / 0.25
x² = 4.5 × 10–6
x = 2.12 × 10–3
pH = -log[Hydronium ion] = -log(2.12 × 10–3) = 2.67
To know more about solution visit:-
https://brainly.com/question/30665317
#SPJ1
Calculate the cell potential, Ecell, for the following reaction at 298k.
Co(s)+2Ag+(0.010M)=Co+2(0.015M)+2 Ag(s)
To calculate the cell potential, Ecell, for the given reaction at 298K, we need to use the Nernst equation. The Nernst equation relates the cell potential to the standard cell potential, temperature, and the concentrations of the reactants and products. The Nernst equation is given as follows:
Ecell = E°cell - (RT/nF) ln(Q)
where,
Ecell = cell potential
E°cell = standard cell potential
R = gas constant (8.314 J/K.mol)
T = temperature (298 K)
n = number of electrons transferred in the balanced redox reaction
F = Faraday constant (96,485 C/mol)
Q = reaction quotient
The given reaction is a redox reaction, which involves the transfer of two electrons from Co to Ag+. The balanced half-reactions are as follows:
Co(s) → Co2+(aq) + 2 e-
Ag+(aq) + e- → Ag(s)
The standard reduction potentials for these half-reactions are:
Co2+(aq) + 2 e- → Co(s) E°red = -0.28 V
Ag+(aq) + e- → Ag(s) E°red = +0.80 V
The overall standard cell potential can be calculated by subtracting the standard reduction potential of the anode from that of the cathode:
E°cell = E°red,cathode - E°red,anode
= +0.80 V - (-0.28 V)
= +1.08 V
Now we need to calculate the reaction quotient Q using the concentrations of the reactants and products. According to the given information, [Ag+] = 0.010 M and [Co2+] = 0.015 M.
Q = ([Co2+][Ag+]^2)/([Ag+]^2)
= ([0.015][0.010]^2)/([0.010]^2)
= 0.015 M
Substituting the values in the Nernst equation, we get:
Ecell = E°cell - (RT/nF) ln(Q)
= 1.08 - (8.314 x 298 / (2 x 96485)) ln(0.015)
= 0.829 V
Therefore, the cell potential, Ecell, for the given reaction at 298K is 0.829 V.
im struggling
What quantity of heat (in kJ) would be required to convert 13.4 g of ice to water at 0.00 °C? (∆Hfus = 6.01 kJ/mol for water)
Around 80.5 KJ
Multiply Heat of Fusion and Mass to get the q value.
What is eutectic temperature
The eutectic point is the lowest temperature at which the liquid phase is constant at a particular pressure.
What does the word "eutectic" mean?A melting composition known as a eutectic consists of at least two components that melt and freeze at the same rates. The components combine during the crystallisation phase, operating as a single component as a result.
What are eutectic pressure and temperature?The eutectic is the system's lowest melting point under its own pressure; it has a matching temperature called the eutectic temperature and produces the eutectic liquid as a result. In terms of composition, eutectic liquids are located between the system's solid phases.
To know more about eutectic visit:-
https://brainly.com/question/27886492
#SPJ1
Calculate the concentrations of all species in a 0.510 M NaCH3COO (sodium acetate) solution. The ionization constant for acetic acid is a=1.8×10−5.
[Na+]=
[OH−]=
[H3O+]=
[CH3COO−]=
[CH3COOH]=
The concentrations of all species in a 0.510 M NaCH₃COO (sodium acetate) solution: [Na+]= 0.510 M , [OH-]= 1.8x10⁻⁵ M , [H₃O+]= 1.8x10⁻⁵ M , [CH₃COO-]= 0.510 M and [CH₃COOH]= 0.510 - (1.8x10⁻⁵) = 0.50982 M.
What is concentration?Concentration is the ability to focus your attention on a single task or thought for a prolonged period of time. It involves being able to ignore distractions and to be able to work through any difficulties or obstacles that may arise. Concentration is an important skill to master in order to achieve success in any endeavor, whether it be academic, professional, or personal. Good concentration can help you to stay focused, organized, and productive. When you are able to concentrate, you can take in the information needed to make better decisions and solve problems. Concentration is a skill that can be developed with practice, such as by setting goals, breaking down tasks into smaller, manageable pieces, and avoiding distractions.
To learn more about concentration
https://brainly.com/question/29330415
#SPJ1
For the reaction: N₂(g) + 3H₂(g) + 2NH3(g) AH = -76.4 KJ/mol. Determine the heat energy when 5.0g of hydrogen burns.
Answer:
-191 kJ
Explanation:
The given reaction is:
N₂(g) + 3H₂(g) → 2NH₃(g) ΔH = -76.4 kJ/mol
From the balanced equation, we can see that the stoichiometric ratio between hydrogen (H₂) and ammonia (NH₃) is 3:2. This means that 3 moles of hydrogen react to produce 2 moles of ammonia.
To determine the heat energy when 5.0 g of hydrogen (H₂) burns, we need to follow these steps:
Step 1: Calculate the moles of hydrogen (H₂)
Using the molar mass of hydrogen (H₂), which is 2 g/mol, we can calculate the moles of hydrogen (H₂) in 5.0 g of hydrogen:
Moles of H₂ = Mass of H₂ / Molar mass of H₂
Moles of H₂ = 5.0 g / 2 g/mol
Moles of H₂ = 2.5 mol
Step 2: Use the stoichiometry of the reaction
Based on the stoichiometry of the reaction, we know that 3 moles of hydrogen (H₂) react to produce 2 moles of ammonia (NH₃), and the enthalpy change (ΔH) is -76.4 kJ/mol.
Step 3: Calculate the heat energy
The heat energy for 2.5 moles of hydrogen (H₂) can be calculated using the given enthalpy change (ΔH) and the stoichiometry of the reaction:
Heat energy = Moles of H₂ x ΔH
Heat energy = 2.5 mol x -76.4 kJ/mol
Heat energy = -191 kJ (rounded to three significant figures)
So, the heat energy when 5.0 g of hydrogen (H₂) burns is -191 kJ (rounded to three significant figures), and the negative sign indicates that the reaction is exothermic, releasing heat.
A sample with the phase diagram below starts at room temperature (25oC) and 1 atm. What phase change would the sample go through if it was cooled to 80 K?
a)Condensation (gas to liquid)
B)Fusion (solid to liquid)
C)Deposition (gas to solid)
D)Vaporization (liquid to gas)
E)Sublimation (solid to gas)
F)Freezing (liquid to solid)
Answer: C)Deposition (gas to solid)
Explanation: According to the phase diagram, at room temperature (25°C) and 1 atm, the sample is in the gas phase. As the temperature decreases to 80 K, it falls below the sublimation curve. T he sublimation curve represents the conditions at which a substance can change directly from a solid to a gas or from a gas to a solid without passing through the liquid phase.
Since the sample is in the gas phase at room temperature, cooling it to 80 K would cause it to go through the process of deposition, where the gas particles directly transform into a solid without first becoming a liquid. This is indicated by the section of the phase diagram below the sublimation curve.
Question 5(Multiple Choice Worth 3 points)
(07.02 LC)
The substances below are listed by increasing specific heat capacity value. Starting at 30.0 °C, they each absorb 100 kJ of thermal energy. Which one do you expect to increase in temperature the least?
a) Cadmium, 0.230 J/(g °C)
b) Sodium, 1.21 J/(g °C)
c) Water, 4.184 J/(g °C)
d) Hydrogen, 14.267 J/(g °C)
Component form of the vector v is as follows: 4 3 1.5 1 Using the standard basis vectors I and j), express the vector w as follows: 3 two 1 4 pp . 1 3 w 3.5 C. V plus w= d. Determine the vector v's magnitude
What does "vector" mean?
Latin word for "carrier" is "vector." Point A is transported to point B by vectors. The orientation of the vectors AB is the direction in which point A is moved in relation to point B, and the amplitude of the vector is the width of the line connecting the two locations A and B. The terms Euclidean vectors and spatial vectors are also used to refer to vectors.
A vector space is what?
A vector space, also known as a linear space, is a collection of things called vectors that can be added to and multiplied ("scaled") by figures called scalars in the fields of mathematics, physics, and engineering.
To know more about vector visit:
https://brainly.com/question/27854247
#SPJ1
The table shows the number of charged particles in an ion.
Charged Particles
Charge on Particle Number of Particles
Positive 3
Negative 2
A negatively charged substance is brought near the ion. What will most likely happen?
The negatively charged ion will repel the substance.
The negatively charged ion will attract the substance.
The positively charged ion will repel the substance.
The positively charged ion will attract the substance.
Answer: three
Explanation:
A mixture that contains large particles that are uniformly dispersed is called a _____.
solvent
emulsion
alloy
colloid
Answer:
colloid
Explanation:
there's no explanation
Please help me
Define acid.
Mention four products of destructive distillation of coal.
In a tabular, highlight two differences between diamond and graphite.
List four types of salt.
Outline two physical properties of a base.
The temperature of a 2.0-liter sample of helium gas at STP is increased to 27C, and the pressure is decreased to 80 kPa. What is the new volume of the helium sample? Round your answer to the nearest tenth of a liter?
The new volume of the helium sample would be 2.4 L.
Volume of a gasAccording to the ideal gas law, PV = nRT, where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature in kelvins.
At STP (standard temperature and pressure), which is defined as 0°C (273.15 K) and 101.325 kPa, the volume of 2.0 liters of helium gas contains one mole of helium atoms.
To find the new volume of the helium sample when the temperature is increased to 27°C (300.15 K) and the pressure is decreased to 80 kPa, we can use the following equation:
(P1V1)/T1 = (P2V2)/T2
where P1, V1, and T1 are the initial pressure, volume, and temperature, respectively, and P2, V2, and T2 are the final pressure, volume, and temperature, respectively.
Plugging in the values, we get:
(101.325 kPa)(2.0 L)/(273.15 K) = (80 kPa)(V2)/(300.15 K)
Solving for V2, we get:
V2 = (101.325 kPa)(2.0 L)/(273.15 K) * (300.15 K)/(80 kPa) = 2.36 L
Therefore, the new volume of the helium sample is approximately 2.4 L (rounded to the nearest tenth).
More on gas laws can be found here: https://brainly.com/question/27009857
#SPJ1
In the Periodic Table below, shade all the elements for which the neutral atom has an outer electron configuration of ms2nd2, where n and m are integers, and =m+n1.
The elements that have an outer electron configuration of ms2nd2 are located in the d-block of the periodic table and include some of the transition metals and lanthanides.
What is the periodic table?To determine which elements in the periodic table have this outer electron configuration, you can look at the position of the d-block elements in the table. The d-block elements are located in the middle of the table and include the transition metals. These elements have partially filled d orbitals, which can accommodate up to 10 electrons.
Elements in the d-block with an atomic number of 21 through 30 (scandium through zinc) have an outer electron configuration of d10s2 and do not fit the ms2nd2 configuration. However, elements in the d-block with an atomic number of 39 through 48 (yttrium through cadmium) have an outer electron configuration of d10s2p1 and can have the ms2nd2 configuration by removing the single electron in the p orbital. Elements in the d-block with an atomic number of 57 through 80 (lanthanum through mercury) also have the possibility of having an outer electron configuration of ms2nd2.
Learn more about periodic table:https://brainly.com/question/11155928
#SPJ1
CHALLENGE The circles below represent of the large circle, and multiply it by 30. That Earth and the moon. Measure the diameter would be the correct distance from Earth to the moon at this scale. Draw the two circles in the space provided. Use the correct distance you found.● = Earth ●=moon
To draw the two circles, we would need to draw a smaller circle with a diameter of 2,532.5 miles (representing the moon) and a larger circle with a diameter of 75,974.4 miles (representing the Earth) that is 30 times larger than the smaller circle.
What is the explanation for the above response?If we assume that the larger circle represents the Earth, then the diameter of the Earth would be 30 times the diameter of the smaller circle representing the moon. Let's say that the diameter of the smaller circle is x. Then the diameter of the larger circle (Earth) would be 30 times x or 30x.
To find the correct distance from Earth to the moon at this scale, we need to know the actual distance from Earth to the moon, which is approximately 238,855 miles or 384,400 kilometers. If we divide this distance by the scale factor of 30, we get:
238,855 miles / 30 = 7,961.8 miles
Therefore, the diameter of the smaller circle (moon) would be approximately 7,961.8 miles / π = 2,532.5 miles (rounded to one decimal place). And the diameter of the larger circle (Earth) would be 30 times that or 75,974.4 miles
So, to draw the two circles, we would need to draw a smaller circle with a diameter of 2,532.5 miles (representing the moon) and a larger circle with a diameter of 75,974.4 miles (representing the Earth) that is 30 times larger than the smaller circle.
Learn more about Earth at:
https://brainly.com/question/19581790
#SPJ1
Which sub atomic particles are similar in size
Answer:
Neutrons and Protons
Explanation:
Different elements can have subatomic particles of varying sizes. The size of an atom is defined by the size of its electron cloud, which is composed of electrons, and the size of its nucleus, which is composed of protons and neutrons. The atomic number and subsequently the identity of an element are determined by the number of protons in the nucleus. The quantity of protons and neutrons in the nucleus determines its size. The quantity of electrons in the electron cloud and the energy levels they are located at define its size. The size of atoms can differ depending on the element due to differences in the amount of protons, neutrons, and electrons.
2AI + 6HCI=2AlCl3 + 3H₂
3. Aluminum reacts with HCI to produce aluminum chloride (AICI3) and hydrogen gas (H₂).
Calculate the number of moles of HCI required to react with 0.62 moles of Al.
3.0 moles of [tex]Al[/tex] can fully react with hydrogen chloride to produce 4.5 moles of [tex]H_{2}[/tex]. Thus, 0.93 moles will be produced by 0.62 moles of [tex]Al[/tex].
STOICHIOMETRYBased on this inquiry, how does aluminum react with hydrogen chloride to produce aluminum chloride and hydrogen gas[tex]Al +6HCl= AlCl_{3} +3H_{2}[/tex]According to this equation, 3 moles of hydrogen gas are produced during the reaction of 2 moles of aluminum ([tex]Al[/tex]).As a result, 3 moles of aluminum will result in 3 3 2 = 4.5 moles of hydrogen gas.As a result, the entire reaction of 3.0 moles of [tex]Al[/tex]with hydrogen chloride can produce 4.5 moles of [tex]H_{2}[/tex].The proportion of reactants to products before, during, and after chemical processes is known as stoichiometry.For more information on stoichiometry kindly visit to
https://brainly.com/question/19484482
#SPJ1
2. A student prepared a 0.500 M solution of an unknown acid, and measured the pH as 3.56 at 25°C. (a) What is the acid dissociation constant of this unknown acid? (b) What percentage of acid is ionised in this solution
To solve this problem, we can use the following equation that relates the pH of a solution to the acid dissociation constant (Ka) and the concentration of the acid:
pH = -log[H+]
where [H+] is the concentration of hydrogen ions in the solution.
(a) To find the Ka of the unknown acid, we need to first find the concentration of hydrogen ions in the solution. We can do this by taking the inverse of the pH and converting it to a concentration:
[H+] = 10^(-pH) = 10^(-3.56) = 2.17 × 10^(-4) M
What is the acid dissociation constant of this unknown acid?The acid dissociation constant (Ka) can then be calculated using the equation:
Ka = [H+][A-]/[HA]
where [A-] is the concentration of the conjugate base of the acid and [HA] is the concentration of the undissociated acid. Since we don't know the values of these concentrations, we need to use the fact that the solution is 0.500 M to make an assumption about the degree of dissociation (α) of the acid:
α = [A-]/[HA]
Since the solution is not extremely dilute, we can assume that the degree of dissociation is small and that the concentration of the undissociated acid is approximately equal to the initial concentration of the acid. Therefore, we can write:
[A-] ≈ 0.500α
[HA] ≈ 0.500 - 0.500α
Substituting these expressions into the equation for Ka, we get:
Ka = [H+][A-]/[HA] ≈ ([H+][A-])/0.500α
≈ ([H+]/Ka)(0.500α)/(1-α)
Solving for Ka, we get:
Ka ≈ H+/0.500α
Substituting the values we have calculated, we get:
Ka ≈ (2.17 × 10^(-4))(1-α)/(0.500α) = 4.37 × 10^(-5)
Therefore, the acid dissociation constant of the unknown acid is approximately 4.37 × 10^(-5).
(b) To find the percentage of acid that is ionized in the solution, we can use the equation:
α = [A-]/[HA] = 10^(-pKa + pH)/(1 + 10^(-pKa + pH))
where pKa is the negative logarithm of the acid dissociation constant. Substituting the values we have calculated, we get:
α = 10^(-(-4.36) + 3.56)/(1 + 10^(-(-4.36) + 3.56)) ≈ 0.008
Therefore, the percentage of acid that is ionized in the solution is approximately 0.8%.
Learn more about dissociation constant from
https://brainly.com/question/30930515
#SPJ1
To solve this problem, we can use the following equation that relates the pH of a solution to the acid dissociation constant (Ka) and the concentration of the acid:
pH = -log[H+]
where [H+] is the concentration of hydrogen ions in the solution.
(a) To find the Ka of the unknown acid, we need to first find the concentration of hydrogen ions in the solution. We can do this by taking the inverse of the pH and converting it to a concentration:
[H+] = 10^(-pH) = 10^(-3.56) = 2.17 × 10^(-4) M
What is the acid dissociation constant of this unknown acid?The acid dissociation constant (Ka) can then be calculated using the equation:
Ka = [H+][A-]/[HA]
where [A-] is the concentration of the conjugate base of the acid and [HA] is the concentration of the undissociated acid. Since we don't know the values of these concentrations, we need to use the fact that the solution is 0.500 M to make an assumption about the degree of dissociation (α) of the acid:
α = [A-]/[HA]
Since the solution is not extremely dilute, we can assume that the degree of dissociation is small and that the concentration of the undissociated acid is approximately equal to the initial concentration of the acid. Therefore, we can write:
[A-] ≈ 0.500α
[HA] ≈ 0.500 - 0.500α
Substituting these expressions into the equation for Ka, we get:
Ka = [H+][A-]/[HA] ≈ ([H+][A-])/0.500α
≈ ([H+]/Ka)(0.500α)/(1-α)
Solving for Ka, we get:
Ka ≈ H+/0.500α
Substituting the values we have calculated, we get:
Ka ≈ (2.17 × 10^(-4))(1-α)/(0.500α) = 4.37 × 10^(-5)
Therefore, the acid dissociation constant of the unknown acid is approximately 4.37 × 10^(-5).
(b) To find the percentage of acid that is ionized in the solution, we can use the equation:
α = [A-]/[HA] = 10^(-pKa + pH)/(1 + 10^(-pKa + pH))
where pKa is the negative logarithm of the acid dissociation constant. Substituting the values we have calculated, we get:
α = 10^(-(-4.36) + 3.56)/(1 + 10^(-(-4.36) + 3.56)) ≈ 0.008
Therefore, the percentage of acid that is ionized in the solution is approximately 0.8%.
Learn more about dissociation constant from
brainly.com/question/30930515
#SPJ1
At 25 ∘C
, the equilibrium partial pressures for the reaction
A(g)+2B(g)↽−−⇀C(g)+D(g)
were found to be A=5.63
atm, B=5.00
atm, C=5.47
atm, and D=5.63
atm.
What is the standard change in Gibbs free energy of this reaction at 25 ∘C
?
The standard change in Gibbs free energy of the reaction at 25 ∘C is -1.69 kJ/mol.
What is standard change?
To find the standard change in Gibbs free energy of the reaction, we need to use the following equation:
ΔG° = -RT ln(K)
where ΔG° is the standard change in Gibbs free energy, R is the gas constant (8.314 J/mol·K), T is the temperature in Kelvin (25 °C = 298 K), and K is the equilibrium constant.
To find K, we need to use the equilibrium partial pressures:
K = (PC × PD) / (PA × PB²)
where PA, PB, PC, and PD are the equilibrium partial pressures of A, B, C, and D, respectively.
Substituting the values, we get:
K = (5.47 atm × 5.63 atm) / (5.63 atm × (5.00 atm)²)
K = 0.6176
Now we can calculate the standard change in Gibbs free energy:
ΔG° = -RT ln(K)
ΔG° = -(8.314 J/mol·K) × (298 K) × ln(0.6176)
ΔG° = -1,690 J/mol or -1.69 kJ/mol
Therefore, the standard change in Gibbs free energy of the reaction at 25 ∘C is -1.69 kJ/mol.
What is free energy?
Free energy, also known as Gibbs free energy, is a thermodynamic quantity that represents the amount of energy in a system that is available to do work at a constant temperature and pressure. It is denoted by the symbol G and is expressed in units of joules (J) or calories (cal).
In simple terms, free energy is the energy that can be used to do work. It is defined by the equation:
ΔG = ΔH - TΔS
where ΔH is the change in enthalpy (heat content) of the system, ΔS is the change in entropy (disorder) of the system, and T is the absolute temperature in Kelvin.
If ΔG is negative, the reaction is spontaneous and can proceed without the input of external energy. If ΔG is positive, the reaction is non-spontaneous and requires energy input to proceed. If ΔG is zero, the system is at equilibrium.
To know more about free energy, visit:
https://brainly.com/question/14150518
#SPJ1