Answer:
A lot of heat
Explanation:
Faster-moving water can carry a greater load.
true or false
Answer:
That is false
Explanation:
Just because it moves faster doesn't mean that it can carry and bigger load.
Answer:
False
Explanation:
can i get brainliest plz
A type of symbiosis where one organism benefits, while the other organism is neutral.
Mutualism
Parasitism
Commensalism
Predation
Answer:
Commensalism is a symbiotic relationship in which one species benefits while the other species is not affected. One species typically uses the other for a purpose other than food.
Why is there an attraction between the two ions in this chemical bond?
Answer:
A metallic bond is a force of attraction between charged metal ions and the electrons that are in the delocalized bond, which covers the assembly of ions. A covalent bond is the force of attraction between the nuclei of atoms, and the electrons shared between them.
Explanation:
A chemical bond is a lasting attraction between atoms, ions or molecules that enables the formation of chemical compounds. The bond can be generated by electrostatic attraction between charged ions (for example, ionic bonds) or by electron sharing (for example, covalent bonds).
I hope this helps you :)
What is the difference between an imprint and an impression?
Answer:
As nouns the difference between impression and imprint
is that impression is the indentation or depression made by the pressure of one object on or into another while imprint is an impression; the mark left behind by printing something.
The term imprint is defined as to mark by or as if by pressure and the term impression is defined as the effect produced by impressing.
What is the difference between an imprint and an impression?The difference between an imprint and an impression is that the imprint is the mark left behind when anything is printed, whereas the impression is the indentation or depression caused by the pressure of one object against or into another.
While a shoe won't make an impression in loose sand, it will on a hard surface like concrete or linoleum. These imprints or impressions might be contrasted with the shoe of a suspect or the tire of a car to see if they belong to the same object.
Thus, The term imprint is defined as to mark by or as if by pressure and the term impression is defined as the effect produced by impressing.
To learn more about the imprint and the impression, follow the link;
https://brainly.com/question/20410964
#SPJ2
The initial amount of low-quality energy available from an energy resource is called its net energy.
Answer:
La cantidad de energía disponible de una fuente de energía determinada se denomina recurso energético. La escasez de recursos energéticos (petróleo, carbón y madera) en algunas de las fuentes de energía más utilizadas plantear necesidad de usar otras fuentes investigar el modo más rentable de emplearlas
Explanation:
Answer:
false
Explanation:
its the amount of high-quality energy available from a given quantity of an energy resource minus the high-quality energy needed to make the energy available.
An aqueous solution has a hydroxide-ion concentration of 1.0x10^-3M. What is the pH of the solution?
a.11
b.3
c.-3
d.7
____ occurs when the vapor pressure of a liquid is equal to the external atmospheric pressure.
Answer:
c
Explanation:
boiling
Which statement is true for nuclear reactions but not for chemical reactions?
#
Choice
A.
They convert some energy into mass.
B.
They convert some mass into energy.
C.
They break bonds between atoms.
D.
They form bonds between atoms.
thermal conductors what
How can you know if something has energy?
(Can you explain it in a sentence?)
Put these events in order.
= Your phone contacts a base station in a cell.
= Once connected, a duplex system allows you to talk to the other person at the same time.
= You dial a number on your cell phone.
The MTSO then connects you to the other device.
= A base station contacts the Mobile Telephone Switching Office (MTSO).
Answer:
You dial a number on your phone
Your phone contacts a base station
The base station contacts the MTSO
The MTSO connects you to the other device
You talk to the person on the other device.
What the common uses for Bohrium?
Answer:
Explanation:
Bohrium's most stable isotope, bohrium-270, has a half-life of about 1 minute. It decays into dubnium-266 through alpha decay. Since only a few atoms of bohrium have ever been made, there are currently no uses for bohrium outside of basic scientific research.
Answer:
look it up?
Explanation:
which do you think will warm up the plate more quickly?
A. Direct sunlight
B.Indirect sunlight
Answer: B
your welcome Bsbssnsnsmsllqql
Speed is the rate of change of position expressed as _____ traveled per unit of time. A. direction B. meter C. displacement D. distance... Help!!!
Answer:
Distance
Explanation:
1.
Events in which molten rock spews out of
the mantle as ash, lava, and gases
Answer:
Landslides, Volcanoes, Earthquakes, and Floods. A opening in the Earth's surface through which melted rock, gases, and ash escape. Events in which molten rock spews out from the mantle to the surface of Earth as ash, lava, and gases
Explanation:
A _____ is an area prone to flooding.
A. basin
B. fault line
C. floodplain
D. desert
Answer:
c. floodplain
Explanation:
brainliest please!
Answer:
I think the answer is floodplain.
Explanation:
I hope this helps, have a blessed day.
Geothermal energy is produced from a combination of high pressure and the breakdown of______ underground.
Fill in the blank
How many kilojoules of heat must be transferred to a 480-g aluminum pizza pan to raise its temperature from 22°C to 234°C? The specific heat of aluminum in this temperature range is 0.96 J/g.°С. Show your work.
Answer:
97.7 kJ
Explanation:
We'll use the formula for specifc heat: Q=mcΔT
Q= heat/energy (Joules), m= mass (grams), c= specific heat (different for each substance and is usually given)
ΔT= final temperature - initial temperature
Let's check our given units and see if they're the correct, here they all are. Let's plug in what we know.
Q=mcΔT
Q=(480)(0.96)(234 - 22)
Q=(480)(0.96)(212)
Q= 97,690 J
Before we submit an answer, let's check out units. We have our answer in Joules, but we want it it kilojoules, so we'll convert it knowing that:
1000 Joules = 1 kilojoule
97,690J x [tex]\frac{1 kJ}{1000J}[/tex] = 97.7kJ
Explanation:
the answer and the working out is shown above.
identify the state of matter in the box,
Answer:
gas
Explanation:
particles are very far apart
The given diagram represents gaseous state of matter. Both a volume and a definite form are absent from a gas. The separation of gas particles is great.
What is state of matter?Solids, liquids, gases, plus plasma are the four states of matter that may be found in daily life. However, a number of additional states of matter have indeed been found.
Some of these additional states are created when a material transitions among two states of matter and doesn't actually exhibit the characteristics of either state. The most exotic are others. Both a volume and a definite form are absent from a gas. The separation of gas particles is great. The gas in a balloon and the air are two examples of gases. The given diagram represents gaseous state of matter.
Therefore, the given diagram represents gaseous state of matter.
To learn more about state of matter, here:
https://brainly.com/question/9402776
#SPJ6
Write the balanced nuclear equation.
263
1.
Sg
254 Rf + A He
106
104
4
2.
211
At
83
He
2
3.
248
96
Cm + He
4
-
235
U
92
+
He
4.
2
Answer:
pag pinag balik tad moyan tama magiging tama sagot nya promise jslsh
-what color is the tube
-is the reaction reversible
-has the reaction reached equilibrium
Answer:
-what color is the tube: Transparent
-is the reaction reversible: what reaction
-has the reaction reached equilibrium: I don't see a reaction
BTW you didn't provide all the information.
Calculate the Density of the substances below to determine if they will float or sink in water.
Mass
Volume
Density
Float or Sink
45. Substance 1
90 ml
46. Substance 2
450 grams
35 grams
24 grams
70 ml
47. Substance 3
12 ml
Explanation:
If the density of the object is more than that of water, it will sink. Otherwise it will float. The density of water is 1 g/mL.
Substance 1,
Mass, m = 450 g, Volume, V = 90 mL
Density = mass/volume
So,
[tex]d_1=\dfrac{450}{90}\\\\=5\ g/mL[/tex]
It will sink.
Substance 2,
Mass, m = 35 g, Volume, V = 70 mL
Density = mass/volume
So,
[tex]d_2=\dfrac{35}{70}\\\\=0.5\ g/mL[/tex]
It will float.
Substance 3,
Mass, m = 24 g, Volume, V = 12 mL
Density = mass/volume
So,
[tex]d_3=\dfrac{24}{12}\\\\=2\ g/mL[/tex]
It will sink.
Describe what is wrong with this sentence:
"When you kick a soccer ball, you create new
kinetic energy!"
Answer:
You transfer kinetic energy from you foot to the ball.
Explanation:
Energy cannot be created or destroyed.
Answer:
hi..,......
.....hsjnsgzgkskshbs
How many grams of sucrose will I add to the water (0.100 L) in order to make the 3 molal solution.
Answer:
mass = 102.69 g of sucrose
Explanation:
First, you need to use the correct expression of molality (m) which is the following:
m = moles / kg solvent (1)
According to the exercise, we need to get the grams, in other words, the mass of the sucrose. To get the mass, we need the moles and molecular weight of sucrose and use the following expression:
moles = mass / MM (2)
Now, if we replace (2) in (1) we have:
m = mass / MM * kg solvent (3)
From here, we solve for the mass and then:
mass = m * MM * kg solvent (4)
Now, then density of water is 1 kg/L, so, the volume of the water will be the same as it's mass, and the molality is 3 m. The molecular weight of the sucrose is (according to several sources) 342.3 g/mol. Replacing all the data in (4) we have:
mass = 3 mol/kg * 0.1 kg * 342.3 g/mol
mass = 102.69 g of sucroseHope this helps
What is the molarity of a solution with 2 moles of HCl in 2000 mL?
Answer:
"1 M" will be the right solution.
Explanation:
The given values are:
Number of moles,
= 2 moles
Volume of solution,
= 2000 mL
or,
= 2 L
Now,
The molarity of the solution will be:
= [tex]\frac{Moles}{Liters}[/tex]
On substituting the values, we get
= [tex]\frac{2}{2}[/tex]
= [tex]1 \ M[/tex]
A scientist wants to test the effectiveness of a medicine in treating
headaches. He puts the medicine into cookies and then tells his subjects to
lie down and have a cookie when they have a headache. He asks them to give
him feedback about how well these relaxation techniques work to cure their
headaches. What rule of ethics does this experiment break?
O A. The subjects are not informed that they are taking a medicine.
B. It is likely to harm his subjects.
C. The scientist is taking the work of others by reviewing the
subjects' feedback.
D. It is testing more than one variable at the same time.
Explain the term respiration and how this process increases the percentage of carbon dioxide in the atmosphere.
Answer:
Please find the explanation to this question below.
Explanation:
3C6H206
How many atoms are there? Help ASAP!
Answer:
the answer to this is 74 :)
Calculate the percentage composition of SrBr2
Answer:
64.6% of Br and 35.4% of Sr
Explanation:
The percentage composition is obtained defining the percentage in mass of each atom in a molecule.
To solve this question we must find the mass of each atom in 1 mole:
Molar mass Br: 79.904g/mol
Molar mass Sr: 87.62g/mol
The molar mass of SrBr2 is:
79.904g/mol*2 + 87.62g/mol =
159.808g/mol + 87.62g/mol =
247.428g/mol
The percentage of Br is:
79.904g/mol*2 = 159.808g/mol / 247.428g/mol * 100
= 64.6% of Br
And percentage of Sr is:
87.62g/mol / 247.428g/mol * 100
= 35.4% of Sr
The extraction of zinc from zinc blend and explain how the zinc oxide be reduced using Carbon monoxide Electrolysis
Answer:
Zinc blend is Zinc sulphide, ZnS.
ZnS is roasted in air producing ZnO and Sulphur dioxide.
ZnO is reduced to Zn by CO.
Further purification is done by electrolysis.