Answer:
We know that ΔK = Kf - Ki = 1/2 m Vf^2 - 1/2 m Vi^2 = 1/2m(Vf^2-Vi^2) = 1/2 m ΔV^2.
The mass remains the same, just calculate the difference of squared velocities and multiply it by half of the mass.
how far will an object fall in 3 seconds
Answer:
144.7832 ft
Explanation:
heres the formula i found to solve
v = v₀ + gt
where:
v₀ is the initial velocity (measured in m/s or ft/s);
t stands for the fall time (measured in seconds); and
g is the free fall acceleration (expressed in m/s² or ft/s²).
Without the effect of air resistance, each object in free fall would keep accelerating by 9.80665 m/s (approximately equal to 32.17405 ft/s) every second. In reality, though, a falling object's velocity is constrained by a value called the terminal velocity.
im sorry i couldnt provide more information, but there was not much info provided in the question itself
A dog is pulling an empty sled attached by a harness that is parallel to the
ground in the snow. The sled is moving with constant velocity. The mass of
the sled is 1.2 kg, and the coefficient of static friction is 0.20. Determine the
harness tension.
Answer:
Explanation:
There are only two forces causing motion involved. They oppose each other. You know this because there is no acceleration of the sled: you see only a velocity.
The formula when friction is involved is
Fnet = T - mu*Normal
mu is the frictional coefficient
The normal is the downward force caused by the mass of the sled being pulled down by the gravitational constant.
The tension is brought about by the dog pulling in the opposite direction to the frictional force.
The frictional force, oddly, acts in a horizontal direction even though the normal is vertical. It does this because friction always opposes motion.
Since there is no acceleration, the net force = 0
N= m * a_g
m = 1.2 kg
a_g = 9.8
N = 1.2 * 9.8
N = 11.76
The frictional force = mu*Normal Force.
Ff = N * mu
N = 11.76
mu = 0.2
Ff = 0.2 * 11.76
Ff = 2.35
As stated The frictional force and the Tension are equal but in opposite directions
T = 2.35
e. Observe: notice or perceive
f. Infer:
g. Repetition:
h. Replication:
i. Data
The synonym of a word( observe, infer, repetition, replication and data) means another word that is nearest in meaning to the given word.
The synonym of the words given from the question is given below:
Observe: This means to notice or perceive something. Therefore the synonym is notice or perceive.Infer: This means to conclude something based on evidence and not from explicit statements. Therefore the synonym is deduce or conclude.Repetition: This means doing or saying something again. Therefore the synonym is recurrence.Replication: This means the process of reproduction. Therefore the synonym is duplicate.Data: This means information that is used to make decisions. The synonym is facts.Therefore, synonym of a word means another word that is nearest in meaning to the given word.
Learn more about data here:
https://brainly.com/question/13171394
What is the final velocity of an object that starts from rest and travels for 5 seconds at an acceleration of 4.3 m/s2? ____________________
The final velocity of an object that starts from rest and travels for 5 seconds at an acceleration of 4.3 m/s² is 21.5m/s.
EQUATION OF MOTION:
The final velocity of a moving object can be calculated by using one of the equations of motion as follows:
V = u + at
Where;
V = final velocity (m/s)u = initial velocity (m/s)a = acceleration (m/s²)t = time (s)According to this question,
t = 5sa = 4.3m/s²u = 0 m/s (at rest)v = ?v = 0 + 4.3(5)
v = 21.5m/s.
Therefore, the final velocity of an object that starts from rest and travels for 5 seconds at an acceleration of 4.3 m/s² is 21.5m/s.
Learn more about equation of motion at: https://brainly.com/question/8898885?referrer=searchResults
Someone plz give me some boy advice I really need it.
I don't understand when to use the formule with the constant k, and when to use the formula without it.
In the exercise that i sent here, they use the formule with a constant but I don't get why.
Can someone help me out please?
Thanks.
Answer:
This appears to be the formula for the electrical force between 2 objects.
You need this constant to calculate the electrical force between 2 charged objects.
Note that k = (1 / 4 * π ∈0)
∈0 is called the permittivity constant and ∈0 = 8.85E-12 farad/m
k = ( 1 / (4 * 3.28 * 8.85E-12) = 8.99E9
This makes F reasonably easy to remember as
F = 9E9 Q1 * Q2 / R^2 Newtons for the electrical force between Q! and Q2 separated by R
What is the weight of sugar if 5% of sugar from 6g of sugar
A pitcher throws a softball toward home plate. When the ball hits the catcher’s mitt, its horizontal velocity is 32 meters/second. The softball’s velocity goes to 0 meters/second in 0. 8 seconds when caught. If the softball has a mass of 0. 2 kilograms, what’s the force of the impact? Use F = ma, where. The force of the impact is newtons.
The force of impact of the softball at the given conditions is 8 N.
The given parameters:
Horizontal velocity of the ball, v = 32 m/sChange in time of motion of the ball, Δt = 0.8 sMass of the ball, m = 0.2 kgThe force of impact of the softball is calculated by applying Newton's second law of motion as follows;
[tex]F = ma\\\\F = m \times \frac{\Delta v}{\Delta t} \\\\F = 0.2 \times \frac{32 - 0}{0.8 - 0} \\\\F = \frac{0.2 \times 32}{0.8} \\\\F = 8 \ N[/tex]
Thus, the force of impact of the softball at the given conditions is 8 N.
Learn more about Newton's second law of motion here: https://brainly.com/question/25307325
A 16.0 kg canoe moving to the left at 12.5 m/s makes an elastic head on collision with a 14.0 kg raft moving to the right at 16.0 m/s after the collision the raft moves to the left at 14.4 m/s assuming water simulates a frictionless surface, what is the final velocity of the canoe?
Answer:
The final velocity of the canoe is -14.1 m/s or 14.1 m/s to the right.
Hope you could get an idea from here.
Doubt clarification - use comment section.
A car accelerates from 10m/s to 22m/s in 10 seconds. What is the car’s acceleration?
A skydiver falls from an airplane and achieves a speed of 98m/s after 10 seconds. the starting speed is 0m/s.
Explain please.
Answer:
See attachment and below
Explanation:
A car accelerates from 10m/s to 22m/s in 10 seconds.
a = (22m/s - 10m/s)/10sec
a = 12m/s/10s
a = 1.2 m/s^2
A skydiver falls from an airplane and achieves a speed of 98m/s after 10 seconds. the starting speed is 0m/s
a = 98m/s - 0m/s)/10sec
a = 9.8 m/s^2
9.8 meters/sec^2 is the acceleration due to gravity.
Pravat exerts a force of 30 N to lift a bag of groceries 0. 5 m. How much work did Pravat do on the bag? Note : Work = Force x Distance 0 J 15 J 30 J 60 J.
Answer:
15 JExplanation:
The work done by an object can be found by using the formula
workdone = force × distance
From the question we have
workdone = 30 × 0.5 = 15
We have the final answer as
15 JHope this helps you
The amount of work done by Pravat if he exerts a force of 30 N to lift a bag of groceries 0.5m is 15J.
WORK DONE:The work done by a body can be calculated by multiplying the force exerted by the distance moved. That is;
Work done = force (F) × distance (m)
According to this question, Pravat exerts a force of 30N to lift a bag of groceries 0.5 m. The work done is calculated as follows:
Work done = 30N × 0.5m
Work done = 15J
Therefore, the amount of work done by Pravat if he exerts a force of 30 N to lift a bag of groceries 0.5m is 15J.
Learn more about work done at: https://brainly.com/question/8119756?referrer=searchResults
A balance of forces is demonstrated by an object which is slowing to a stop true or false
Answer:
its true since i already did this last year, if i am wrong i apologize
Explanation:
A rocket burns fuel at a rate of 239 kg/s
and exhausts the gas at a relative speed of
6 km/s.
Find the thrust of the rocket.
Answer in units of MN.
The Thrust on the rocket is 1.434 MN.
To calculate the thrust of a rocket, we use the formula below
Thrust: This is the force that moves an aircraft through the air.
⇒Formula
T = M'×v.................... Equation 1⇒ Where:
T = Thrust of the rocketM' = Fuel ejection ratev = gas exhaust velocityFrom the question,
⇒ Given:
M' = 239 kg/sv = 60 km/s = 6000 m/s⇒ Substitute these values into equation 1
T = 239(6000)T = 1434000 NT = 1.434 MNHence, the Thrust on the rocket is 1.434 MN.
Learn more about Thrust here: https://brainly.com/question/13501791
Which of the balls will exert the smallest force on object A?Why
Starting from rest an object accelerates on a straight line at rate of 2ms‐² for 10 seconds. what is the speed of the object at the end of the 10 seconds
Answer:
20 meters/sec
Explanation:
See attachment.
2m/s^2 = (v - 0)/10s
v = 20 m/s
Your mother asks you to carry a load of wood to the fireplace and lower it to the hearth. In doing this you have used your arms as levers. Which statement describes this as a class three lever?
Question 13 options:
The wood in your hands was the fulcrum, the load your elbow, and the effort (input force) was supplied by your arm muscles.
The wood was the load in your hands, the fulcrum was your elbow and the effort (input force was supplied by your arm muscles.
The fulcrum was the muscles in your arms, the load was the wood in your hands and the effort (input force) was the elbow.
Answer: The correct answer is the weight of the wood.
Explanation:
Hope this helps
a water balloon is thrown a target at 18 m/s. if the water balloon has a mass of 0.4 kg, what is the momentum?
The momentum of the water balloon at the given speed is 7.2 kgm/s.
The given parameters:
Speed of the water balloon, v = 18 m/sMass of the balloon, m = 0.4 kgThe momentum of the water balloon is calculated as follows;
P = mv
Substitute the given values of mass and velocity as follows;
P = 0.4 x 18
P = 7.2 kg m/s.
Thus, the momentum of the water balloon at the given speed is 7.2 kgm/s.
Learn more about momentum here: https://brainly.com/question/7538238
Can someone please help me with number 10
Answer:
A
Explanation:
increase
Answer:
B???
Explanation:
The rate of it going up is lower than L
It might be D too.
Two billiard balls move toward each other on a table. The mass of the number three ball, m1, is 5 g with a velocity of 3 m/s. The mass of the eight ball, m2, is 6 g with a velocity of 1 m/s. After the balls collide, they bounce off each other. The number three ball moves off with a velocity of 5 m/s. What is the final velocity and direction of the eight ball? 8. 6 m/s 5. 7 m/s â€"5. 7 m/s â€"8. 6 m/s.
This question involves the concepts of the law of conservation of momentum and velocity.
The velocity of the eight ball is "5.7 m/s".
According to the law of conservation of momentum:
[tex]m_1u_1+m_2u_2=m_1v_1+m_2v_2[/tex]
where,
m₁ = mass of number three ball = 5 g
m₂ = mass of the eight ball = 6 g
u₁ = velocity of the number three ball = 3 m/s
u₂ = velocity of the eight ball = - 1 m/s (negative sign due to opposite direction)
v₁ = final velocity of the three number ball = - 5 m/s
v₂ = final velocity of the eight ball = ?
Therefore,
(5 g)(3 m/s) + (6 g)(- 1 m/s) = (5 g)(- 5 m/s) + (6 g)(v₂)
[tex]v_2=\frac{34\ g.m/s}{6\ g}\\\\[/tex]
v₂ = 5.7 m/s
Learn more about the law of conservation of momentum here:
https://brainly.com/question/1113396?referrer=searchResults
Which statement about diffraction is correct?
O The amplitudes of two waves combine to appear as one big wave.
O Sound waves bend around the corners of various obstacles.
O The amplitudes of two waves combine to appear as a wave smaller than the individual waves.
O Sound waves can only travel in straight lines.
Answer:
Sound waves bend around the corners of various obstacles.
Explanation:
I took the test
( the answer only for points will be reported ) A crane lifts a load of 36000N to a height of 50 metre in 1 minute . What is the power of the crane ?
Answer:
- 30 kW
Explanation:
IDEA:
Power of an object that does work(source) is given by:
[tex] \boxed{ \mathsf{power = \frac{work \: done}{time} }}[/tex]
where work done is mostly shown as the Force applied on an object to Displace it through some distance in the same direction as the Force.
[tex] \boxed{ \mathsf{ work = force \times displacement}}[/tex]
___________________
INFORMATION:
In the question,
The source of power is the crane, while the object is a load of 36000N.
Note, what's given is the force, not the mass. Since, the SI unit of mass is kg and that of Force is Newton(N).
[The weight of the load is represented in Newton, since weight of an object is the amount of Force with which the Earth attracts that object]
I) work done
So,
Force = 36000NDisplacement = 50 m=> Work = 36000 × 50
= 1,800,000 J
(The SI unit of work is Joules(J)).
___________________
II) power
After getting the amount of work done, now we have to place it in the formula for power.
That is:
[tex] \boxed{ \mathsf{power = \frac{work \: done}{time} }}[/tex]
Note, During calculations, all quantities must be in their SI units.
SI unit for time is Seconds (s)
But the time we have is in minutes.
___________________
Converting time from minutes to Seconds:
1 minute = 60 Seconds.
Hence,
time = 60 s[tex] \implies \mathsf{power = \frac{1800000}{60} } \: [/tex]
=> power = 30,000 W
(SI unit of power is Watts(W))
To write four zeroes with a 3 and W is a lot of effort. So, we can look for simple expressions like kilowatts(kW) that can express bigger quantities in lesser terms.
1000 W = 1 kW
•°• 30,000 W = 30 kW.___________________
Direction and sign:
The crane displaces the load in an upward direction (from the term "lifts")
But, the Force is acting downwards, as the weight of the body is always towards the Earth.
Since, the directions of Force and displacement are opposite, a minus takes its place in front of both Work and power.
___________________
Therefore, the final answer will be:
Power of the crane = - 30 kWcan someone explain why is the answer 3.1?
i dont know Im sorry but why Im messaging is because when more people respond it usually is the first to pop up so someone else will see this and be able to help you Explanation:
Rafiq has heard that continued exposure to light for 10 days can change the colour of some blue dyes used to colour cotton clothing. He decides to test this. He takes a piece of clothing dyed with a blue dye which is suspected to lose colour on such exposure. He cuts the cloth into two pieces.
Which experiment is likely to help him conclude if the dye indeed can change colour?
He should expose, for 10 days-
A. Both pieces under 2 identical lamps.
B. One piece under a lamp; keep the other in darkness.
C. One piece for 5 days and one for 10 days under identical lamps
D. One piece folded and one piece spread out under 2 identical lamps.
What is the monthly cost of using a 750 W refrigerator that runs for 8 hours every day, if the cost per kWh is $0.23?
Answer:
Assuming there are 28 days in each month,
750W = 0.75kW
Cost of electric bill = 0.75 × 8 × 28 × $0.23
= $38.64
Why does gravity on Earth have a stronger attraction with you than the sun has with you? Plsssssss help I really need this rn
Answer:
Although the Earth has a lesser mass than the Sun, it is far closer to you, allowing for a stronger pull.
Explanation:
Porque la densidad de un solido es alta?
[tex] \large \sf{hola \: amigo ♡ }[/tex]
Porque, las partículas en los sólidos están muy juntas. Están empaquetados herméticamente, dando a los sólidos altas densidades.
espero que ayude ♡♡
Why is kinetic energy lost in an inelastic collision?
Answer:
This is because some kinetic energy had been transferred to something else.
Explanation:
An inelastic collision is a collision in which there is a loss of kinetic energy. While momentum of the system is conserved in an inelastic collision, kinetic energy is not.
A 5.00 kg crate is on a 21.0 degree hill. Using X-Y axes tilted down the plane, what are the X AND Y components of the NORMAL FORCE?
Answer:
y-component = 45.75N
x-component = 0N
Explanation:
how is one kg mass defined in SI system
Answer:
It is originally defined as the mass of one liter (10-3 cubic meter) of pure water.
A box slides across a rough surface, eventually coming to rest.
Part A
a. Use the work-energy principle (Khan Academy:Work and the work-Energy Principle and the definition of work to explain why the box comes to rest.
b. Explain how the motion of the box is consistent with the Law of Conservation of Energy.
Answer:
he was a random act like you to be the first time I see is a great day and night to get a very happy to see you soon I hope that the world is not the same thing to say about this
a) When a box slides across a rough surface, eventually coming to rest, its kinetic energy is used during work done against frictional resistance force.
b) This work done is stored in the box as a potential energy. Thus the motion of the box is consistent with the Law of Conservation of Energy.
What is work-Energy Principle?According to the work-energy theorem, the work done by the net force acting on a body equals the change in kinetic energy.
It can simply be written as:
Work done = initial kinetic energy - final kinetic energy
The work energy theorem equation is the one presented above.
Now when a box slides across a rough surface, eventually coming to rest, frictional force comes into play. This force is opposite to the direction of motion of the box. Hence, the kinetic energy of the box is used during work done against frictional resistance force and stored in the box as a potential energy and thus Law of Conservation of Energy followed.
Learn more about energy here:
https://brainly.com/question/1932868
#SPJ2