which of the following alkene addition reactions occur(s) specifically in an anti fashion?group of answer choicesa. hydroborationb. bromination in ch2cl2c. oxymercuration -demercurationd. hydrogenation
The alkene addition reaction that occurs specifically in an anti addition is bromination in CH₂Cl₂ (dichloromethane solvent).Bromine is a liquid that is more easily handled than chlorine gas, many halogen additions are carried out with bromine. Inert solvent such as methylene chloride (CH₂Cl₂) is typically used for halogen additions because these solvents dissolve both halogens and alkenes.
Attack of the alkene on bromine gives the bromonium ion, which is attacked at the backside by bromide ion to give the trans-dibromo product. Note that the bromines are delivered to opposite sides of the alkene (“anti” addition). The bromines add to opposite faces of the double bond (“anti addition”). Sometimes the solvent is mentioned in this reaction – a common solvent is CH₂Cl₂ (dichloromethane solvent). CH₂Cl₂ actually has no effect on the reaction, it’s just to distinguish this from the reaction where the solvent is H₂O, in which case a bromohydrin is formed.
Learn more about bromination here:
https://brainly.com/question/28938775
#SPJ11
g aqueous hydrobromic acid will react with solid sodium hydroxide to produce aqueous sodium bromide and liquid water . supposed 4.05 g of hydrobromic acid is mixed with 3.7 g of sodium hydroxide. calculate the maximum mass of sodium bromide that could be produced by the chemical reaction. be sure your answer has the correct number of significant digits.
The maximum mass of sodium bromide that can be produced in this reaction is 4.05 g. So, the correct answer is option C.
This is because the limiting reagent, or the reagent with the least amount, is the hydrobromic acid, which has a mass of 4.05 g.
HBr + NaOH → NaBr + H2O is the reaction equation for this reaction. The total mass of the products and reactants must be equal in order for the rule of conservation of mass to apply.
Since hydrobromic acid has a mass of 4.05 g, the maximum mass of sodium bromide that can be produced is the same.
This quantity of sodium bromide is created when both reactants are used up entirely in the reaction and none are left behind.
Complete Question:
A aqueous hydrobromic acid (HBr) will react with solid sodium hydroxide (NaOH) to produce aqueous sodium bromide (NaBr) and liquid water (H2O). If 4.05 g of hydrobromic acid is mixed with 3.7 g of sodium hydroxide, what is the maximum mass of sodium bromide that could be produced by the chemical reaction?
A. 2.75 g
B. 3.7 g
C. 4.05 g
D. 4.75 g
To learn more about sodium visit:
https://brainly.com/question/28580895
#SPJ4
if you wanted to make 475ml of a saturated solution of ce2(so4)3 at 30oc, how much solute should you add? (the density of water is 1g/ml)
You should add 370.75g of ce2(so4)3 to 475ml of water to make a saturated solution at 30°C. Since the density of water is 1g/ml, the final volume of the solution will be approximately 845ml.
To make a saturated solution of ce2(so4)3 at 30°C, you would need to dissolve as much of the solute as possible in 475ml of water. The solubility of ce2(so4)3 at 30°C is approximately 77g/100ml of water. Therefore, to calculate how much solute you should add to 475ml of water, you need to use the following equation:
Solute mass = solute solubility x volume of solvent
Solute mass = (77g/100ml) x 475ml
Solute mass = 370.75g
Learn more about saturated solution here: brainly.com/question/1851822
#SPJ11
a metal anode has a standard reduction potential of minus 1.56 v and the cathode has a reduction potential of minus 1.16 v what is the e0cell question 2 options 2.72 v 0.40 x 0.40 v 2.72 v
The correct answer is: 0.40 V is the e0cell. In a galvanic cell, the flow of electrons from the anode to the cathode generates an electrical potential difference between the two electrodes.
The standard cell potential, E°cell, is a measure of this potential difference under standard conditions, which includes a temperature of 25°C, a pressure of 1 atm, and a concentration of 1 M for all solutes.
To calculate the standard cell potential, E°cell, we use the formula:
E°cell = E°cathode - E°anode
where E°cathode is the reduction potential of the cathode (reduction occurs at the cathode) and E°anode is the reduction potential of the anode (oxidation occurs at the anode).
In this case, we have:
E°cell = (-1.16 V) - (-1.56 V)
E°cell = 0.40 V
Therefore, the standard cell potential, E°cell, is 0.40 V.
The correct answer is: 0.40 V.
Learn more about galvanic cell,
https://brainly.com/question/13031093
#SPJ4
presently, the annual average of co2 is about 400 ppm, and the concentration is increasing by about ____ ppm per year.
Presently, the annual average concentration of CO2 is about 400 ppm, and the concentration is increasing by about 2-3 ppm per year.
The concentration of CO2 in the atmosphere has been increasing steadily due to human activities, such as burning fossil fuels, deforestation, and industrial processes. The rate of increase in CO2 concentration varies from year to year, but on average, it is increasing by about 2-3 ppm per year. This rate of increase has been accelerating over the past few decades due to increased emissions from human activities.
This increase in CO2 concentration is a major contributor to global climate change, as CO2 is a greenhouse gas that traps heat in the Earth's atmosphere and contributes to global warming. Reducing greenhouse gas emissions and finding ways to remove CO2 from the atmosphere are critical steps in addressing the challenge of global climate change.
Learn more about global warming here:
https://brainly.com/question/12908180
#SPJ11
24. if is struck by a slow neutron, it can form andanother nucleus. (a) what is the second nucleus? (this is amethod of generating this isotope.)(b) how much energy is released in the process?
The nuclear reactions involving uranium-235. When uranium-235 is struck by a slow neutron, it can undergo nuclear fission, forming krypton-92 and barium-141 as well as releasing three neutrons. This process is a method of generating these isotopes.
(a) The second nucleus formed in this reaction is barium-141.
(b) In the fission process, a significant amount of energy is released, approximately 200 MeV (million electron volts) per fission event.
This energy is released in the form of kinetic energy of the fission products, kinetic energy of the released neutrons, and the release of gamma photons. The energy released comes from the binding energy of the uranium nucleus, which is converted into these other forms of energy during the fission process. Nuclear fission is used in nuclear power plants to generate electricity due to the large amount of energy it produces.
Know more about Nuclear reactions here :
brainly.com/question/984564
#SPJ11
A flask contains 0. 25M KOH solution. What mass of KOH is present per dm^3
There are 14.03 grams of KOH present per d[tex]m^{3}[/tex] of solution.
To find the mass of KOH present per d[tex]m^{3}[/tex], we need to use the molarity of the solution and the molar mass of KOH.
The molar mass of KOH is 56.11 g/mol.
We know that the solution has a molarity of 0.25M, which means there are 0.25 moles of KOH per liter of solution.
To find the mass of KOH per d[tex]m^{3}[/tex](which is the same as per liter), we can multiply the molarity by the molar mass:
0.25 mol/L x 56.11 g/mol = 14.03 g/L
Therefore, there are 14.03 grams of KOH present per d[tex]m^{3}[/tex] of solution.
Know more about molarity here:
https://brainly.com/question/30404105
#SPJ11
PLEASE HELP
In this experiment you will observe phase changes in water. Pay particular attention to how the temperature changes in the beaker of ice as it changes to a liquid and then again to steam. Here are some questions to think about and base your hypothesis on. What do you think the temperature will do as the ice melts and when it changes to water? What do you think the temperature will do when the water begins to boil?
Supplies needed:
crushed ice
string
burner or alcohol lamp
beaker
ceramic pad
thermometer
ring stand or alcohol stand
ethyl alcohol for use with alcohol lamp
time piece with a second hand
Instructions:
1. Fill the beaker with crushed ice. Suspend a thermometer in the ice so the bulb of the thermometer is close to but does not touch the bottom of the beaker.
2. Record the temperature of the contents in the beaker.
3. Warm the beaker with the heat source. Stir gently. Be careful not to let the thermometer touch the beaker.
4. Record the temperature every fifteen seconds. Note the states in the beaker on a separate sheet of paper each time the temperature is recorded.
5. Record several temperatures at intervals as the water begins to boil.
Compile a summary of your findings during this investigation. Be sure to answer the questions below and include your hypothesis, observations, data, interpretation, and conclusion in your report.
What was the temperature of the ice before you added heat?
What was the temperature as the ice melted?
At what temperature did the water begin to boil?
Did the temperature of the water rise or remain constant as the water boiled?
If the temperature did not change while heat was being added, what was happening to the ice or the water at that time?
What do you think the heat was used for if not to raise the temperature?
Was there room for human error in your investigation? Why or why not?
What did you learn from this investigation? Be thoughtful in your answer.
This experiment aims to observe the temperature changes during the phase changes of water and formulate hypotheses based on the observations.
What is the purpose of suspending the thermometer in the ice, and why should it not touch the bottom of the beaker?The purpose of suspending the thermometer in the ice is to measure the temperature of the ice. It should not touch the bottom of the beaker because the bottom may be warmer than the ice, which could give an inaccurate reading.
Why is it important to record the states in the beaker every time the temperature is recorded?It is important to record the states in the beaker (solid ice, melting ice, liquid water, boiling water, steam) because the temperature remains constant during the phase changes. The states indicate the changes in the internal energy of the system, which is not reflected in the temperature.
Learn more about temperature here:
https://brainly.com/question/31055263
#SPJ1
What is used to measure atmospheric pressure? Please draw this diagram below.
The instrument used to measure atmospheric pressure is called a barometer. There are two main types of barometers: mercury barometers and aneroid barometers.
What is Atmospheric Pressure?
Atmospheric pressure, also known as air pressure, is the force exerted by the weight of the Earth's atmosphere on the surface of the Earth. It is the pressure exerted by the gases in the atmosphere, primarily nitrogen (78%) and oxygen (21%), along with trace amounts of other gases.
The barometer consists of a glass tube, sealed at one end and open at the other, that is filled with mercury (Hg). The open end of the tube is placed in a container of mercury, and the pressure of the atmosphere pushes down on the surface of the mercury in the container, causing the mercury to rise up the tube.
Learn more about Atmospheric Pressure from the given link
https://brainly.com/question/19587559
#SPJ1
g consider a semiconductor with 10 13 donors/cm 3 which have a binding energy of 10 mev. (a) what is the concentration of extrinsic conduction electrons at 300 k? (b) assuming a gap energy of 1 ev (and m* ? m 0 ), what is the concentration of intrinsic conduction electrons? (c) which contribution is larger?
At 300 K, some of the donors will ionize, releasing electrons into the conduction band. The concentration of extrinsic conduction electrons can be calculated using the equation [tex]n = N_D * exp(-E_D/kT),[/tex] where n is the concentration of electrons, [tex]N_D[/tex] is the donor concentration, [tex]E_D[/tex] is the binding energy of the donors, k is Boltzmann's constant, and T is the temperature in Kelvin.
(b) At 300 K, some electrons will also be thermally excited into the conduction band, creating intrinsic conduction. The concentration of intrinsic conduction electrons can be calculated using the equation [tex]n_i = N_C * exp(-E_G/2kT)[/tex] , where [tex]n_i[/tex] is the concentration of electrons, [tex]N_C[/tex] is the effective density of states in the conduction band, and [tex]E_G[/tex] is the bandgap energy.
(c) The contribution of intrinsic conduction is generally smaller than that of extrinsic conduction, as the concentration of dopants is usually much higher than the intrinsic carrier concentration at room temperature.
Learn more about electrons ,
https://brainly.com/question/1255220
#SPJ4
Fe +H₂SO4→Fe₂(SO4)3 +H₂
Can someone balance this for me
Answer:
2 Fe+ 3H₂SO₄=Fe₂(SO₄)₃+3H₂
Explanation:
The reaction type is a single replacement.
The base peak in the mass spectrum of a ketone or aldehyde is often due to a alpha-fragmentation, or cleavage of the bond adjacent to the carbonyl group. This cleavage yields a(n) ________ ion, which has a high abundance bc it is ________ stabilized
The cleavage yields a carbonyl cation or "acylium" ion, which has a high abundance because it is resonance stabilized.
The ion that is formed as a result of alpha-fragmentation in a ketone or aldehyde mass spectrum is called the acylium ion. This ion is stabilized by resonance, which is why it is typically observed as the base peak in the mass spectrum. The acylium ion is a cationic species that contains a positive charge on the carbonyl carbon and a lone pair of electrons on the oxygen atom. This charge distribution allows for resonance stabilization, as the positive charge can be delocalized across the carbonyl carbon and the adjacent carbon atom. The acylium ion is also a reactive intermediate that can undergo further fragmentation or reactions with other molecules. Overall, the observation of the acylium ion as the base peak in a ketone or aldehyde mass spectrum provides valuable information about the structure and stability of these compounds.
To learn more about acylium ion click here
brainly.com/question/30502496
#SPJ11
which is a specific safety concern when handling the tlc developing solvent used in this experiment? keep cold, it is explosive at room temperature. keep away from open flames or hot surfaces. it forms hydrogen gas when combined with metals. do not mix with water.
A specific safety concern when handling the TLC developing solvent used in this experiment is to keep it away from open flames or hot surfaces. Option 2 is correct.
The TLC developing solvent used in this experiment is often a flammable organic solvent such as ethyl acetate or hexane. These solvents have a low flash point, which means they can ignite easily and burn rapidly if exposed to an ignition source such as an open flame or hot surface.
Therefore, it is important to keep the solvent away from open flames or hot surfaces to prevent fires and explosions. In addition, it is recommended to handle these solvents in a well-ventilated area to minimize the risk of inhalation or skin exposure. It is also important to avoid contact with reactive metals, as some solvents can react with metals to form hydrogen gas, which can be flammable or explosive.
Finally, these solvents should not be mixed with water, as they are immiscible and can form separate layers, which can cause splattering or other hazards. Hence Option 2 is correct.
To learn more about TLC developing solvent, here
https://brainly.com/question/17562109
#SPJ4
If a reaction is performed in 155 g of water with a heat capacity of 4.184 J/g °C and
the initial temperature of a reaction is 19.2°C, what is the final temperature (in units
of °C) if the chemical reaction releases 1420 J of heat?
Answer choices:
21.4
29.2
27.4
34.5
For this exercise, the formula for calculating heat is needed
[tex]Q = m × c_{s} × ∆T [/tex]
In this case, we need to fInd the difference in temperature of the water, so
[tex]∆T = \frac{Q}{m × c_{s}} = \frac{1420 J}{155 g × 4,184 J/g °C} = 2,2 °C[/tex]
Since water accepts heat from the reaction, its temperature increases therefore the final temperature is
[tex]T_{f} = T_{0} + ∆T = 19,2 °C + 2,2 °C = 21,4 °C[/tex]
A balloon is filled with 30.0L of He gas at 1.0atm. What is
The volume of the balloon when it rises to an altitude where the pressure is only 0.25 atm is 120.0 L.
What is Boyle's law?Boyle's law is a gas law which describes the relationship between the pressure and volume of a gas, assuming that the temperature remains constant. The law states that the pressure of a gas is inversely proportional to its volume at constant temperature. Mathematically, Boyle's law can be expressed as:
P ∝ 1/V
or
P1 x V1 = P2 x V2
where P1 and V1 are the initial pressure and volume of the gas, respectively, and P2 and V2 are the final pressure and volume of the gas, respectively.
To solve this problem, we can use Boyle's law,
Using the given information, we can set up the equation as follows:
1 atm x 30.0 L = 0.25 atm x V2
Solving for V2, we get:
V2 = (1 atm x 30.0 L) / 0.25 atm = 120.0 L
Therefore, the volume of the balloon when it rises to an altitude where the pressure is only 0.25 atm is 120.0 L.
Learn more about volume here:
https://brainly.com/question/13338592
#SPJ1
Correct question is:
A balloon is filled with 30.0L of helium gas at 1atm. What is the volume when the balloon rises to an altitude where the pressure is only 0.25atm?
which of the following statements about nonmetal anions are true? select all that apply. select all that apply: nonmetals tend to form anions by gaining electrons to form a noble gas configuration. nonmetals do not tend to form anions. anions of nonmetals tend to be isoelectronic with a noble gas. nonmetals tend to form anions by losing electrons to form a noble gas configuration.
The correct statements are:
1. Nonmetals tend to form anions by gaining electrons to form a noble gas configuration.
2. Anions of nonmetals tend to be isoelectronic with a noble gas.
Nonmetals do not tend to form anions and nonmetals tend to form anions by losing electrons to form a noble gas configuration are not true statements. Nonmetals do tend to form anions by gaining electrons to achieve a stable, noble gas configuration. Anions of nonmetals often have the same number of electrons as a noble gas, making them isoelectronic with that noble gas. Nonmetals do not tend to form anions by losing electrons, as they typically have a higher electronegativity and therefore attract electrons towards themselves rather than giving them up.
Therefore, the correct answer would be the first and third statements.
Learn more about noble gas configuration at https://brainly.com/question/28585122
#SPJ11
Nonmetals tend to form anions by gaining electrons to form a noble gas configuration.
Anions of nonmetals tend to be isoelectronic with a noble gas.
Nonmetals have a tendency to gain electrons in order to form anions, since this allows them to achieve a noble gas electron configuration. This is particularly true for nonmetals located on the right-hand side of the periodic table, such as the halogens. In contrast, metals tend to lose electrons to form cations.
Anions of nonmetals typically have the same number of electrons as a noble gas atom with the next higher atomic number. This means that they are isoelectronic with the noble gas, and have a stable electronic configuration. For example, the chloride ion (Cl-) is isoelectronic with argon.
It is not true that nonmetals do not tend to form anions by losing electrons, as this would result in a cationic species.
Learn more about isoelectronic here:
https://brainly.com/question/6807313
#SPJ11
a sample of ideal gas at room temperature occupies a volume of 36.0 l at a pressure of 382 torr . if the pressure changes to 1910 torr , with no change in the temperature or moles of gas, what is the new volume, v2 ?
According to Boyle's law, which states that the pressure of an ideal gas is inversely proportional to its volume when the temperature and moles of gas are held constant, we can use the formula:
The new volume of the gas (V2) is approximately 7.22 L.
Given:
Initial volume (V1) = 36.0 L
Initial pressure (P1) = 382 torr
Final pressure (P2) = 1910 torr
Since the gas is ideal and there is no change in temperature or moles of gas, we can use Boyle's Law, which states that the pressure and volume of a given amount of gas are inversely proportional at constant temperature.
Mathematically, Boyle's Law is represented as:
P1 * V1 = P2 * V2
Plugging in the given values, we can solve for the new volume (V2):
382 torr * 36.0 L = 1910 torr * V2
V2 = (382 torr * 36.0 L) / 1910 torr
V2 ≈ 7.22 L
So, the new volume of the gas (V2) is approximately 7.22 L.
Learn more about “ Boyle's law, “ visit here;
https://brainly.com/question/1437490
#SPJ4
Using the ideas of Mendeleev, how would the following elements be arranged from left to right?
Argon, Fluorine, Magnesium, Potassium
The elements would be arranged as follows from left to right based on the ideas of Mendeleev; Magnesium, Argon, Potassium, Fluorine
Mendeleev's periodic table was based on the properties of elements, and he arranged them in order of increasing atomic mass. The modern periodic table is arranged based on increasing atomic number, but the relative order of the elements is similar.
Magnesium (Mg) has an atomic number of 12 and is a metal, so it would be placed first. Argon (Ar) has an atomic number of 18 and is a noble gas, so it would be placed next. Potassium (K) has an atomic number of 19 and is an alkali metal, so it would be placed before Fluorine (F), which has an atomic number of 9 and is a halogen.
To know more about Mendeleev here
https://brainly.com/question/13169820
#SPJ4
Noble gases are unreactive because, except for helium, they have a stable arrangement of____ valence electrons in the outer energy level. This arrangement is called a(n)____
Noble gases are unreactive because, except for helium, they have a stable arrangement of eight valence electrons in the outer energy level. This arrangement is called a(n) octet.
The octet rule states that atoms tend to gain, lose or share electrons in order to achieve a stable octet arrangement, similar to that of noble gases. Since noble gases already have a stable octet, they have no need to form chemical bonds with other elements.
Noble gases are unreactive because, except for helium, they have a stable arrangement of 8 valence electrons in the outer energy level. This arrangement is called a(n) full or complete electron shell.
To learn more about octet rule click here
brainly.com/question/865531
#SPJ11
elements in groups 11 through 14 lose electrons to form an outer energy level containing full s, p, and d sublevels. these relatively stable electron arrangements are referred to as
The Elements in groups 11 through 14 lose electrons to form an outer energy level containing full s, p, and d sublevels. These relatively stable electron arrangements are referred to as "noble gas configurations" or "pseudo-noble gas configurations."
The elements in the groups 11 through 14, which include copper, silver, gold, and lead, lose electrons to form an outer energy level containing full s, p, and d sublevels. These stable electron arrangements are commonly referred to as the noble gas configurations, as they resemble the electron configuration of the noble gases located in the group 18 of the periodic table.
Learn more about stable electron here: brainly.com/question/2845051
#SPJ11
Identify the correct statement(s) about the resting membrane potential of a cell.Select all that apply.Potassium (K+) and sodium (Na+) gradients are maintained by active transport in a resting mammalian neuron.Neurons are the only cells that have a charge difference across their membranes.Concentration gradients of potassium (K+) and sodium (Na+) across the plasma membrane represent potential energy.
The statement "Neurons are the only cells that have a charge difference across their membranes" is incorrect. All cells have a resting membrane potential, but it may not be as significant as that of neurons.
The correct statements about the resting membrane potential of a cell are:
- Potassium (K+) and sodium (Na+) gradients are maintained by active transport in a resting mammalian neuron.
- Concentration gradients of potassium (K+) and sodium (Na+) across the plasma membrane represent potential energy.
The statement "Neurons are the only cells that have a charge difference across their membranes" is incorrect. All cells have a resting membrane potential, but it may not be as significant as that of neurons.
The correct statement(s) about the resting membrane potential of a cell are:
1. Potassium (K+) and sodium (Na+) gradients are maintained by active transport in a resting mammalian neuron.
2. Concentration gradients of potassium (K+) and sodium (Na+) across the plasma membrane represent potential energy.
Neurons are not the only cells that have a charge difference across their membranes, as other cells also exhibit resting membrane potential.
Visit here to learn more about potassium : https://brainly.com/question/13321031
#SPJ11
on plm channels is channell zero used for diagnotics only?
Yes, typically channel zero on PLM (power line communication) channels is used for diagnostics only. It is reserved for testing and troubleshooting purposes and is not used for transmitting data.
This helps ensure the reliability and accuracy of the data transmitted on the other channels. Channel zero is the reserved channel in PLM communication systems used for diagnostics and testing purposes.Yes, typically channel zero on PLM (power line communication) channels is used for diagnostics only. It is reserved for testing and troubleshooting purposes and is not used for transmitting data. The other channels are used for transmitting data. By reserving one channel for testing and troubleshooting, it helps to ensure that the data transmitted on the other channels is reliable and accurate. This helps to prevent issues such as data corruption or transmission errors.
learn more about diagnostics here
https://brainly.com/question/14697946
#SPJ11
Yes, commonly channel on PLM (energy line verbal exchange) channels is used for diagnostics only.
It is reserved for trying out and troubleshooting functions and isn't always used for transmitting statistics. This allows make sure the reliability and accuracy of the statistics transmitted on the opposite channels. Channel 0 is the reserved channel in PLM verbal exchange structures used for diagnostics and trying out functions.Yes, commonly channel 0 on PLM (energy line verbal exchange) channels is used for diagnostics only. It is reserved for trying out and troubleshooting functions and isn't always used for transmitting statistics. The different channels are used for transmitting statistics. By booking one channel for trying out and troubleshooting, it allows to make sure that the statistics transmitted on the opposite channels is dependable and accurate. This allows to save you troubles including statistics corruption or transmission errors.
To learn more about diagnostics check the link below-
https://brainly.com/question/3787717
#SPJ4
g using the webcsd, through utsa libraries website, perform a substructure search for tin and acetylsalicylic acid. ( note: leave off the hydrogen atom on the oxygen atom when drawing acetylsalicylic acid. do not connect the metal to acetylsalicylic acid ) 1. how many structures were found on the webcsd containing tin and acetylsalicylic acid? 2. using the earliest crystal structure containing tin and acetylsalicylic acid answer the following: a. what is the refcode of this structure? b. what year was the article of this structure published? c. how many ligands were coordinated to tin ion in this structure? 3. what is the name of the journal that the earliest crystal structure of tin is published in?
To find the number of structures containing tin and acetylsalicylic acid on the WebCSD, perform a substructure search using the UTSA Libraries website.
1. Go to the UTSA Libraries website and access WebCSD.
2. In WebCSD, select the "Substructure Search" option.
3. Draw the tin atom and acetylsalicylic acid structure (leaving off the hydrogen atom on the oxygen atom, and not connecting the metal to the acetylsalicylic acid).
4. Click on "Search" to perform the substructure search.
For the earliest crystal structure containing tin and acetylsalicylic acid, note down:
a. The refcode of the structure.
b. The year the article was published.
c. The number of ligands coordinated to the tin ion.
The journal name where the earliest crystal structure of tin is published can also be found in the search results.
Please follow these steps to find the answers to your questions.
To know more about acetylsalicylic acid click on below link:
https://brainly.com/question/13188890#
#SPJ11
What is the most dangerous airborne particulates?
The most dangerous airborne particulates are known as PM2.5 (particulate matter 2.5 micrometers or smaller in diameter).
These fine particles can be inhaled deep into the lungs, potentially causing severe health problems, such as respiratory and cardiovascular issues. Due to their small size and ability to bypass our body's natural defenses, PM2.5 particulates pose a significant risk to human health.
The following are a few of the riskiest airborne particulates:
Fine particulate matter (PM2.5) is a term used to describe microscopic particles having a diameter of 2.5 micrometres or less that have the ability to enter the bloodstream and go deep into the lungs. Asthma, heart attacks, and lung cancer are just a few of the respiratory and cardiovascular issues that PM2.5 can bring on.
Paints, cleaning supplies, and building materials all include volatile organic compounds (VOCs), which are organic substances that can vaporise into the air at room temperature. VOCs can irritate the eyes, nose, and throat, induce headaches, and occasionally even lead to cancer.
The incomplete combustion of fossil fuels results in the deadly gas carbon monoxide (CO), which is present in gas heaters, stoves and vehicle exhaust. CO can lead to headaches, lightheadedness,
Learn more about airborne here:
https://brainly.com/question/20332086
#SPJ11
The most dangerous airborne particulates are those that are small enough to reach the deepest parts of the lungs, such as the alveoli, where they can cause damage and inflammation. These particulates are referred to as fine particulate matter (PM2.5) and ultrafine particulate matter (PM0.1).
PM2.5 consists of particles with a diameter of 2.5 micrometers or less, while PM0.1 consists of particles with a diameter of 0.1 micrometers or less. These particulates can come from a variety of sources such as vehicle exhaust, industrial emissions, and wildfires.
Exposure to PM2.5 and PM0.1 has been linked to a range of health effects, including respiratory and cardiovascular disease, as well as premature death. These particulates can also carry toxic chemicals and heavy metals that can further increase their harmful effects on human health.
For more question on airborne particulates click on
https://brainly.com/question/30929564
#SPJ11
Susan complains of chronic muscle pain. This is the chief complaint for patients with
which disorder?
O muscular dystrophy
O fibromyalgia
O tendinitis
O hernia
Answer:
B. fibromyalgia
Explanation:
how many moles of sodium bromide can be produced from 1.03 moles sodium with o.650 moles bromine gas
The amount of moles of sodium bromide that can be produced from 1.03 moles of sodium and 0.650 moles of bromine gas is 1.03 moles.
This is because the ratio of sodium to bromine in sodium bromide is 1:1. Therefore, when there is 1.03 moles of sodium and 0.650 moles of bromine, the maximum amount of sodium bromide that can be produced is 1.03 moles.
This is because for every mole of sodium, there must be one mole of bromine to form one mole of sodium bromide. Since there is insufficient bromine, the maximum amount of sodium bromide that can be produced is 1.03 moles.
Know more about Sodium bromide here
https://brainly.com/question/1152005#
#SPJ11
For the reaction
H2(g) + I2(g) ⇀↽ 2 HI(g)
at 425◦C, calculate [HI], given [H2] = [I2] =
0.000412 mol/L and K = 54.3.
Answer in units of mol/L.
The concentration of hydrogen iodide (HI) at equilibrium is approximately 7.37 mol/L.
What is Equilibrium?
Equilibrium refers to a state of balance or stability in a system where opposing forces or processes are in balance, resulting in no net change over time. In the context of chemical reactions, equilibrium refers to a point at which the rates of the forward and reverse reactions are equal, resulting in a constant concentration of reactants and products over time.
The equilibrium expression for the given reaction is:
K = [tex][HI]^{2}[/tex] / ([H2] * [I2])
Given:
[H2] = [I2] = 0.000412 mol/L (initial concentrations of H2 and I2)
K = 54.3 (equilibrium constant)
54.3 = [tex](2[0.000412])^{2}[/tex] / ([0.000412][0.000412])
Solving for [HI], we get:
[tex][HI]^{2}[/tex] = 54.3 * [tex][0.000412] ^{2}[/tex] /[tex][0.000412]^{2}[/tex]
[tex][HI]^{2}[/tex] = 54.3
[HI] ≈ 7.37 mol/L (rounded to two decimal places)
So, the concentration of hydrogen iodide (HI) at equilibrium is approximately 7.37 mol/L.
Learn more about Equilibrium from the given link
https://brainly.com/question/18849238
#SPJ1
how many different arrangements of atoms, not including resonance forms, are possible for o4
The word can include any letter of the alphabet (26 letters) and that repetition is allowed, then the number of possible arrangements of 100 letters is equal to [tex]26^100,[/tex] which is a very large number (approximately[tex]1.43 x 10^143).[/tex]
Assuming that by "wiord" you mean "word", there are different ways to interpret this question depending on the context.
If you are referring to the molecule O4, which is not a stable compound under standard conditions and is more commonly known as an ozone molecule, then there is only one arrangement of atoms that is possible. This is because the O4 molecule consists of four oxygen atoms that are chemically equivalent and can only form one unique structure.
If you are referring to a word made up of 100 letters, then the number of different arrangements of atoms is not applicable as atoms are not involved in the context of words.
Learn more about atoms
https://brainly.com/question/30898688
#SPJ4
The word can include any letter of the alphabet (26 letters) and that repetition is allowed, then the number of possible arrangements of 100 letters is equal to 2600 which is a very large number .
If you are referring to the molecule O4, which is not a stable compound under standard conditions and is more commonly known as an ozone molecule, then there is only one arrangement of atoms that is possible. This is because the O4 molecule consists of four oxygen atoms that are chemically equivalent and can only form one unique structure.
If you are referring to a word made up of 100 letters, then the number of different arrangements of atoms is not applicable as atoms are not involved in the context of words.
Learn more about atoms
brainly.com/question/30898688
#SPJ11
Think about different mixtures you’re familiar with. Describe three mixtures: one solid, one liquid, and one gas. If you can’t think of an example in each state, perform online research to help you. For each mixture, describe the atoms, molecules, or both that make it up, and state whether the mixture is heterogeneous or homogeneous.
mixtures can exist in different states, and their properties can vary accordingly. Solid mixtures like trail mix consist of distinguishable components.
How to solve the problem?
One solid mixture is trail mix, which consists of various solid components such as nuts, seeds, and dried fruit. These components are made up of molecules such as proteins, fats, and carbohydrates. Trail mix is a heterogeneous mixture as the different components can be seen and distinguished from each other.
One liquid mixture is soda, which consists of carbonated water, sugar, and flavorings. The carbonated water is a mixture of water and carbon dioxide gas, while the sugar and flavorings are made up of molecules. Soda is a homogeneous mixture as the different components are evenly distributed and cannot be distinguished from each other.
One gas mixture is air, which is a mixture of nitrogen, oxygen, carbon dioxide, and other gases. These gases are made up of atoms such as nitrogen atoms, oxygen atoms, and carbon atoms. Air is a homogeneous mixture as the different gases are evenly distributed and cannot be distinguished from each other.
In conclusion, mixtures can exist in different states, and their properties can vary accordingly. Solid mixtures like trail mix consist of distinguishable components, while liquid mixtures like soda have evenly distributed components. Gas mixtures like air are also homogeneous, and their components are not easily distinguishable from each other.
To know more about mixture visit :-
https://brainly.com/question/24647756
#SPJ1
if something is oxidized, it is formally losing electrons. if something is oxidized, it is formally losing electrons. true false
The given statement, if something is oxidized, it is formally losing electrons. if something is oxidized, it is formally losing electrons is true.
When something is oxidized, it means that it is undergoing a chemical reaction where it loses electrons. This process can be represented using oxidation numbers, which are used to keep track of the transfer of electrons between atoms during a reaction. In general, oxidation is defined as the process by which an atom, ion or molecule loses one or more electrons. This leads to an increase in the oxidation state of the atom, ion or molecule.
There are various examples of oxidation reactions that occur in everyday life. For instance, when iron rusts, it is undergoing an oxidation reaction where it loses electrons to oxygen in the air. Similarly, when a potato is cut and exposed to air, it turns brown due to an oxidation reaction between the oxygen in the air and the enzymes in the potato. In both cases, the process of oxidation involves the loss of electrons from one substance to another.
know more about oxidation numbers here
https://brainly.com/question/29257381#
#SPJ11