Answer:
Check the explanation section.
Explanation:
The following steps should be followed orderly.
STEP ONE:
Use the dilution equation in the calculation of the volume for the stock solution. That is, C1 × V1 = C2 × V2.
Where C1 and C2 are the concentration of the stock solution and the diluted solution.
STEP TWO:
Put 6% of lactose and make sure to dilute it in order to make 2.0% lactose
and put it in Beaker A. Also, make sure to dilute the 1M to 0.1M SPG buffer in Beaker B.
STEP TWO:
Now, from beaker A containing 2% lactose, measure and remove 5.0 mL from it. Also, measure and remove 5.0 mL from beaker B containing 0.1M SPG.
So, in STEP TWO above we won't know how much water we need to use for dilution, thus, there is the need to make use of STEP ONE.
Therefore, from STEP ONE ABOVE, we have the dilution equation given as;
C1 × V1 = C2 × V2.
Hence, 6 × V1 = 2 × 5. Therefore, the volume needed from the stock solution, V1 = (2 × 5)/ 6 = 1.6 mL.
STEP THREE:
Now measure out 1.6 mL from the stock solution, that is 6% lactose and add it to 5mL of the diluted solution of 2% in beaker A into another container, say beaker C and add H2O to form SOLUTION X.
STEP FOUR:
Using the dilution equation again, Determine the the volume that is needed from 1M SPG.
C1 × V1 = C2 × V2.
V1 = ( 0.1 × 5)/ 1 = 0.5mL.
STEP FIVE:
measure 0.5mL out from the 1M SPG and 5 mL out of 0.1M SPG buffer and add water to it to form SOLUTION Y.
STEP SIX:
Now, mix solution X and solution Y together and take the required 5ml
Question 3 (1 point)
Consider the following unbalanced chemical equation representing the combustion of methane, yielding carbon dioxide and water.
CH4 + O2 --> CO2 + H20
If you had burned 800 g of methane, how many moles of Carbon dioxide would be produced?
A)122.22
B)8
C)2200
D)100
E)670
F)750
G)50
Answer:
Im pretty sure its B
Explanation:
Answer:
G) 50 mol
Explanation:
Given data:
Mass of methane = 800 g
Number of moles of CO₂ produced = ?
Solution:
Chemical equation:
CH₄ + 2O₂ → CO₂ + 2H₂O
Number of moles of methane:
Number of moles = mass/molar mass
Number of moles = 800 g/ 16 g/mol
Number of moles = 50 mol
Now we will compare the moles of methane and carbon dioxide.
CH₄ : CO₂
1 : 1
50 : 50
A scientist observes several different fossils in a
rock layer. Based on this observation, which is
the best conclusion?
A. The fossils are composed of lava that cooled
around several organisms.
B. The fossils formed about the same time as the
rock layer in which they were found.
C. The fossils formed after heat and pressure
changed the type of rock in the rock layer.
D. The fossils are composed of the same material
as the organisms from which they formed.
A scientist observes several different fossils in a
rock layer. Based on this observation, which is
the best conclusion?
Answer:A. The fossils are composed of lava that cooled
A. The fossils are composed of lava that cooledaround several organisms.
B. The fossils formed about the same time as the rock layer in which they were found.
Explanation:That's the right answer but you can choose one.
#CARRYONLEARNING #STUDYWELLWhat is the mass number for an atom of zinc containing 30 protons and 34 neutrons?
Answer:
64
Explanation:
mass number =proton + neutron
=30+34=64
Container A holds 717 mL of an ideal gas at 2.80 atm. Container B holds 174 mL of a different ideal gas at 4.30 atm. Container A and container B are glass spheres connnected by a tube with a stopcock. Container A is larger than container B. If the gases are allowed to mix together, what is the resulting pressure
Answer:
3.09 atm
Explanation:
Given that:
Volume of container A = 717 mL
Pressure of container A = 2.80 atm
Volume of container B = 174 mL
Pressure of container B = 4.30 atm
Now, if the valve are being removed and the gases are allowed to mix together; then
The total final pressure can be calculated by using the formula:
[tex]P_f = \dfrac{P_AVA+P_BV_B}{V_A+V_B}[/tex]
[tex]P_f = \dfrac{2.80*717+4.30*174}{717+174}[/tex]
[tex]P_f = \dfrac{2007.6+748.2}{891}[/tex]
[tex]P_f = \dfrac{2755.8}{891}[/tex]
[tex]\mathbf{P_f =3.09 \ atm}[/tex]
The absence of the intermolecular attraction between the atoms or molecules is called an ideal gas. The pressure of the resultant mixture is 3.09 atm.
What is the relation between pressure and volume?The relationship between the pressure and the volume of the gas is given by Boyle's law which states the inverse proportionality relation with the volume.
Given,
The volume of container A = 717 mL
The volume of container B = 174 mL
The pressure of container A = 2.80 atm
The pressure of container B = 4.30 atm
The total final pressure of the ideal gas of the mixture is calculated by:
[tex]\begin{aligned} \rm P_{f} &= \rm \dfrac{P_{A}V_{A}+ P_{B}V_{B}}{V_{A}+V_{B}}\\\\&= \dfrac{2007.6 +748.2}{891}\\\\&= 3.09 \;\rm atm\end{aligned}[/tex]
Therefore, the total pressure of the mixture is 3.09 atm.
Learn more about pressure here:
https://brainly.com/question/13534890
Which element easily gains one electron to form a negative ion?
Flourine
Magnesium
Nitrogen
Lithium
Answer: Fluorine
Explanation: Fluorine has an oxidation state of -1, meaning it gains 1 electron in chemical bonds, forming a negative ion. Magnesium has an oxidation state of +2, nitrogen has -3, and lithium has an oxidation state of +1.
Answer:
Fluorine.
Explanation:
I took this test not to long ago. I got this question correct. Also, the reason is because every other element is balanced.
What is the source of thermal energy for Earth's mantle?
A Earth's core
B. global warming
C. mantle downwelling
D. radiation from the sun
Answer:
D. Radiation from the sun
Explanation:
The main source of thermal energy for the earth is Sun. The sun is major source which provide heat energy and light energy to the earth. The sun converts almost 4 million tons of energy into electromagnetic radiations which is a source of thermal energy for Earth's Mantle.
When NH3(aq) is added to Cu2 (aq), a precipitate initially forms. Its formula is:
a. Cu(NH)3
b. Cu(NO3)2
c. Cu(OH)2
d. Cu(NH3)22
e. CuO
When NH₃(aq) is added to Cu₂(aq), a precipitate initially forms. Its formula is Cu(NH₃)². The correct option is d.
What is a chemical formula?A chemical formula is a representation of chemical elements and chemical compounds. The chemical letters are used to write the chemical formula. The charges if present is written by charges symbols like plus, minus.
The chemical reaction is
NH₃(aq) + Cu₂(aq) = Cu(NH₃)²
This is called a chemical reaction, which contains reactant on the left side and products on the right side. The precipitate that is formed is copper ammonia whole twice.
Precipitation is the solid crystals' substance that is come out at the surface of the liquid. It is collected in solid form, and it is called a precipitate.
Thus, the correct option is d. Cu(NH₃)².
To learn more about chemical formulas, refer to the link:
https://brainly.com/question/15138610
#SPJ2
What are the products of the acid-base reaction of sodium carbonate with acetic acid?
Answer:
The mixture quickly foams up with carbon dioxide gas. If enough vinegar is used, all of the baking soda can be made to react and disappear into the vinegar solution. The reaction is: Sodium bicarbonate and acetic acid reacts to carbon dioxide, water and sodium acetate.
Explanation:
hope this helps
A chemist dissolves of pure potassium hydroxide in enough water to make up of solution. Calculate the pH of the solution. (The temperature of the solution is .) Be sure your answer has the correct number of significant digits.
Answer:
12.99
Explanation:
A chemist dissolves 716. mg of pure potassium hydroxide in enough water to make up 130. mL of solution. Calculate the pH of the solution. (The temperature of the solution is 25 °C.) Be sure your answer has the correct number of significant digits.
Step 1: Given data
Mass of KOH: 716. mg (0.716 g)Volume of the solution: 130. mL (0.130 L)Step 2: Calculate the moles corresponding to 0.716 g of KOH
The molar mass of KOH is 56.11 g/mol.
0.716 g × 1 mol/56.11 g = 0.0128 mol
Step 3: Calculate the molar concentration of KOH
[KOH] = 0.0128 mol/0.130 L = 0.0985 M
Step 4: Write the ionization reaction of KOH
KOH(aq) ⇒ K⁺(aq) + OH⁻(aq)
The molar ratio of KOH to OH⁻is 1:1. Then, [OH⁻] = 0.0985 M
Step 5: Calculate the pOH
We will use the following expression.
pOH = -log [OH⁻] = -log 0.0985 = 1.01
Step 6: Calculate the pH
We will use the following expression.
pH + pOH = 14
pH = 14 - pOH = 14 -1.01 = 12.99
A chemist determines by measurements that moles of nitrogen gas participate in a chemical reaction. Calculate the mass of nitrogen gas that participates.
Answer:
0.56 g
Explanation:
A chemist determines by measurements that 0.020 moles of nitrogen gas participate in a chemical reaction. Calculate the mass of nitrogen gas that participates.
Step 1: Given data
Moles of nitrogen gas (n): 0.020 mol
Step 2: Calculate the molar mass (M) of nitrogen gas
Molecular nitrogen is a gas formed by diatomic molecules, whose chemical formula is N₂. Its molar mass is:
M(N₂) = 2 × M(N) = 2 × 14.01 g/mol = 28.02 g/mol
Step 3: Calculate the mass (m) corresponding to 0 0.020 moles of nitrogen gas
We will use the following expression.
m = n × M
m = 0.020 mol × 28.02 g/mol
m = 0.56 g
Explain the concept of “Happy Atoms” as it relates to why atoms bond together.
Answer:
I think this means that they always compatible so th er e basically friends and they stick together. c: hope I helped
Why does solid water (ice) float when placed in liquid water? *
Ice does not float in liquid water.
Ice is less dense than liquid water.
Ice is more dense than liquid water.
The densities of liquid water and ice are the same .
Answer:
Ice is less dense than water.
What are 4 ways you can improve your skeletal system health?
Answer:
1. get vitamin c
2. get your bone mineral density tested
3. don't smoke or drink excessively
4. start weight-bearing exercise
Explanation:
helps improve skeletal system
A chemist adds of a M calcium sulfate solution to a reaction flask. Calculate the mass in grams of calcium sulfate the chemist has added to the flask
Answer:
1.23 g
Explanation:
A chemist adds 1.55 L of a 0.00582 M calcium sulfate solution to a reaction flask. Calculate the mass in grams of calcium sulfate the chemist has added to the flask.
Step 1: Given data
Volume of the solution (V): 1.55 LMolar concentration of the solution (C): 0.00582 M (0.00582 mol/L)Step 2: Calculate the moles (n) of calcium sulfate added
We will use the following expression.
n = C × V
n = 0.00582 mol/L × 1.55 L
n = 0.00902 mol
Step 3: Calculate the mass corresponding to 0.00902 moles of calcium sulfate
The molar mass of calcium sulfate is 136.14 g/mol.
0.00902 mol × 136.14 g/mol = 1.23 g
Which describes a difference between cephalopods and gastropods?
Cephalopods have a water vascular system, and gastropods have an open circulatory system.
Cephalopods live only in ocean environments, and gastropods live in a variety of environments.
Cephalopods have a simple nervous system, and gastropods have a complex nervous system.
Cephalopods are the largest group of mollusks, and gastropods are the smallest group of mollusks. CAN SOMEONE PLZZZZ ANWER THIS I WILL GIVE U 15 PIONTS
Answer:
B
Explanation:
I took the test
Answer:
The correct answer is B
Explanation: