I am very dull and brittle, I can't transfer thermal energy very well, and I tend to be a gas. I must be a ...

a
metal
b
nonmetal
c
metalloid
d
noble gas

Answers

Answer 1
the answer is nonmetal. good luck and give thanks :)
Answer 2

Answer and Explanation:

A nonmetal is the answer.

Cause they are dull and brittle, and can be a gas at times at room temperature.

#teamtrees #PAW (Plant And Water)


Related Questions

Facts about flooding

Answers

Answer:

No region is safe from flooding. All 50 states are subject to flash floods.[1]

Flash floods can bring walls of water from 10 to 20 feet high.[2]

A car can be taken away in as little as 2 feet of water.[3]

To stay safe during a flood, go to the highest ground of floor possible. If your skin comes in contact with flood water, make sure to wash it with soap and disinfected water because the contents are unknown.[4]

Flooding is caused by spring thawing (snow and frozen grounds melting in the spring), heavy rains, snow melt runoffs, flash floods, and mudflows.[5]

Floods are the most widespread natural disaster aside from wildfires. 90% of all U.S. natural disasters declared by the President involve some sort of flooding.[6]

In preparation for a flood, it is important to stock up on first aid items, non-perishable foods, 3 gallons of water per person for 3 days, battery operated radio for weather reports, extra batteries, personal hygiene necessities.[7]

Based on Floodsmart, a 2,000 square foot home undergoing 12” of water damage could cost more than $50,000.[8]

Since flood damage is almost never covered by homeowners insurance, flood insurance is important for people living in high-risk flood zones.[9]

To stay safe during a flood, go to the highest ground of floor possible. If your skin comes in contact with flood water, make sure to wash it with soap and disinfected water because the contents are unknown.[10]

Communities particularly at risk are those located in low-lying areas, near water, or downstream from a dam.[11]

Cytokinesis happens differently for plant and animal cells. Both separate cytoplasm between two new daughter cells. However, which type of cell cytokinesis looks like a balloon being separated by a string being pulled tightly between them?

Question 4 options:

Plant Cell cytokinesis


Animal Cell Cytokinesis


Both


Neither

Answers

Answer:

Animal Cell Cytokinesis

Explanation:

Answer: Animal cell

Explanation:) It refers to the process of cell division, which takes place during mitosis, is known as cytokinesis.

The process of cytokinesis is different for animal cell and plant cell.

Where, in case of plant cell, a separation, known as cell plate is formed along the center of the parent cell, which is responsible for the separation of the cells.

Whereas, in case of animal cell, the plasma membrane contracts itself along the center, until the two daughter cells are separated from each other.

Hence, from the given information of the question,

The correct answer is animal cell.

Why are most anions basic in H2O? Give formulas of four anions that are not basic.

Answers

Answer:

The anions that can act as bases (conjugate bases of weak acids) have the capability to hydrolyse water and produce OH− ions. Cl−, Br−NO−3, SO2−4 are all conjugate bases of strong acids that don't have the capability to hydrolyse water and so they aren't basic.

Explanation:

SOMEONE HELP WITH THAT THING PLSSS( I also didn’t know what to put as the topic)

Answers

Answer:

hope this helps

Explanation:

Water was on earth with the dinosaurs and almost at the very start.

Water starts anywhere from clouds to ponds

I choose ponds, water evaporates from the sun and moves its way through the air being collected into clouds in the atmosphere, clouds are evaporated water molecules, then the water combines to form rain wich then end up on a hill and travel back to a water source or goes into the ground and makes groundwater and if there is enough rain overtime will form a pond.

Determine the correct set-up below to determine what mass, in grams, of N2 is needed to completely react with 105 g F2 ?

Answers

Answer:

C: 1 mol F2/38 g F2

Explanation:

The reaction equation is;

N2 + 3F2 = 2NF3

Now, to know how many grams, of N2 is needed to completely react with 105 g F2 and since the molar mass of N2 is 28.02 g/mol, Molar mass of F2 is 38 g/mol, number of moles attached to N2 and F2 in the reaction are 1 and 3 moles respectively, then we will have;

105 g F2 × 1 mol F2/38 g F2 × 1 mol N2/3 mol F2 × 28.02 g N2/1 mol N2

Option C is Thus correct

Which is an energy source for a coyote?

Answers

Answer:

The coyotes are both a plant and meat eaters whose common food is 90% of their diet, is small animals. Rabbits, hares, birds, snakes, fish, crustaceans, and insects are all on the menu.

hopefully this is right :))

Answer:

sun

Explanation:

How many moles of gas would be present in a gas trapped within a 37.0 L vessel at 80.00C at a pressure of 2.50 atm

Answers

go here is the answer key

http://msschmidly.weebly.com/uploads/2/6/2/0/26201624/gases_review___calculations.pdf

According to ideal gas equation, there are 271472.7 moles of gas present in a gas trapped within a 37.0 L vessel at 80.0°C at a pressure of 2.50 atm.

What is mole?

Mole is defined as the unit of amount of substance . It is the quantity measure of amount of substance of how many elementary particles are present in a given substance.

It is defined as exactly 6.022×10²³ elementary entities. The elementary entity can be a molecule, atom ion depending on the type of substance. Amount of elementary entities in a mole is called as Avogadro's number.

It is widely used in chemistry as a suitable way for expressing amounts of reactants and products.For the practical purposes, mass of one mole of compound in grams is approximately equal to mass of one molecule of compound measured in Daltons .Molar mass has units of gram per mole . In case of molecules, where molar mass  in grams present in one mole  of atoms is its atomic mass.

Substitution of values in ideal gas equation gives,n= 2.5×37/8.314×353=271472.7 moles.

Learn more about moles,here:

https://brainly.com/question/26416088

#SPJ3

An element ceases to be that element if the particle it loses or gains is a neutron.
True or false

Answers

Answer:

  False

Explanation:

An element is named according to the number of protons in the nucleus. If it gains or loses a neutron, it becomes a different isotope of the same element.

The given statement is false.

Answer:

FALSE

Explanation:

#CARRYONLEARNING

questions.
1) The degree of polarity of a bond is indicated by
A. Ionization energy difference
B. The shape of the molecule
C. Electronegativity difference
D. The partial charges of the molecule
2) When electrons are shared unequally, chemists characterize

Answers

Answer:

d

Explanation:

the partial charges of the molecule

I think it’s D hope that helped

Write the correct formula for each compound named below. Show the from which it is formed.

Answers

Answer:

Explanation:

Sodium Chloride = Na⁺ + Cl⁻ = NaCl

Lithium bromide = Li⁺ + Br⁻ = LiBr

Magnesium fluoride = Mg ⁺²  +  F⁻ = Mg₂F.

Potassium Oxide = K⁺ + O⁻² = K₂O

Calcium sulphide  = Ca⁺² + S⁻² = CaS

Aluminum Iodide = Al⁺³ + I⁻ = Al I₃

Barium bromide = Ba⁺² + Br⁻ = BaBr₂

Aluminum sulphide = Al⁺³ + S⁻ = Al₂S₃

Calcium Phosphide = Ca⁺² + P⁻³ = Ca₃P₂

Lithium Nitride = Li⁺ + N⁻³ = Li₃N

Magnesium Oxide = Mg⁺² + O⁻² = MgO

Aluminum Fluoride = Al⁺³ + F⁻ = AlF₃

Lithium Oxide = Li⁺ + O⁻² = Li₂O

Beryllium iodide = Be⁺² + I⁻ = BeI₂

what is the difference b/w combustion and synthesis reaction ?explain with example​

Answers

Answer:

A synthesis reaction occurs when two or more reactants combine to form a single product in a double replacement reaction two compounds exchange elements. Combustion reaction occurs when a substance reacts quickly with oxygen combustion is commonly called burning. Example'- for synthesis reaction is iron+ oxygen water . Example:- for combustion reaction is often gaseous products.

may be this was ur answer I hope it might help u

Can someone please fill in the blanks?

Answers

Answer:

g3gegsgehshhwwjwuwuwu2euyeeyeyyy

Answer:

helium formula He

Ammonia formula NH3

methane formula CH₄

chlorine formula  Cl-

Explanation:

Solid sodium reacts violently with water, producing heat, hydrogen gas, and sodium hydroxide. How many g of hydrogen gas are formed when 125.0 g of sodium are added to water?

2Na + 2H2O → 2NaOH + H2

Answers

6.38 x 1023 molecules of H2

I have 8 valence electrons, completely nonreactive, and my family contains Helium that is used to fill balloons! I must be a...

a
metal
b
nonmetal
c
metalloid
d
noble gas

Answers

D, Helium is a noble gas

Answer:

Noble gas

Explanation:

Noble gases are complete octets ( have 8 valence electrons) Helium is a member of this family.

The gravitational force between two masses is proportional to
A.
the difference between the masses.
B.
the first mass divided by the second mass.
C.
the product of the masses.
D.
the sum of the masses.

Answers

Answer:

D.

the sum of the masses.

Explanation:

Assignment Prompt
In this assignment, you will research the relationship between different types of energy when energy is

being transformed. You will present your findings in the form of bar graphs or pie charts that show the

forms of energy at different times in the process. You will then create a poster to display your findings.

Your poster should include a title, a brief description of the energy transformation you are showing, your

graphs, and works cited.

Assignment Instructions

Step 1: Gather materials and necessary information.

a) You will choose an energy transformation to show. Some of the ones you have learned about

include those that occur in a burning bonfire and a wind turbine.

• Do research to find out about an energy transformation that affects your daily life.

• Find out what the starting types of energy are and what the ending types of energy are.

• Decide how many steps in the process your poster will show.

• Create bar graphs or pie charts to show the relationship between the different types of

energy at different steps in the transformation process.

b) Be sure to keep a list of your references so you can cite them later.

Step 2: Decide on a title.

a) Begin by deciding on a title for your poster and writing it neatly at the top.

b) The title should identify the energy transformation you are showing.

Step 3: Create your graphs.

a) Decide how many graphs you will need to show the energy transformation.

b) You should have at least 3 graphs so that the steps of the transformation will be clear.

c) Each graph should be clearly labeled.

d) Careful use of color on your graphs will make them easy to read and understand.

Step 4: Decide on the descriptive words to include on your poster.


a) People looking at your poster may need more information than just the title and the

graphs. Decide on how you want to present the information your viewers need.

b) Keep the information as short as possible while still including what you need. Remember that

when people look at a poster, they focus on the graphics.

Step 5: Decide on the best layout for your poster.

a) You want to incorporate your text and visuals in a way that is attractive and attention-getting.

b) Keep your graphics as large as possible.

Step 6: Put your poster together.

Step 7: Cite your sources.

a) In the lower right-hand corner of your poster, create a section titled Works Cited.

b) List the resources you used to create your poster. A simple list of website titles and

addresses (URLs) is acceptable. If you used print sources, list the title, author, publisher, city,

and date. The print for this section can be small; it needs to be readable close-up.

Step 8: Identify yourself as the creator of the poster.

a) Place your name in the lower right-hand corner of the poster.

b) On the back, write your teacher’s name and the due date for the poster.

Step 9: Evaluate your poster using this checklist.

If you can check each criterion below, you are ready to submit your presentation.

Yes No Evaluation Question

Does your poster have a title that grabs interest and tells what your subject is?

Are the graphs clearly labeled?

Are the graphs bright and colorful?

Is the text on the poster clearly written so that the viewer understands what you are trying

to show?

Is it free from misspellings?


Is your poster laid out in a way that invites people to look at it?

Have you included your name and works cited?

Is your entire poster neat and attractive?

Step 10: Revise and submit your poster.

a) If you were unable to check off all the requirements on the checklist, revise your poster

before submitting it.

b) Ask your teacher for further instructions about presenting your poster to an audience of your

peers.

Resource Suggestions

• Bar Graph

• Pie Chart

please help! you need to make a poster with any kind of paper and no drawing and if you do any drawing on the poster make it the skill of a 6th grader 100 points plus brainly if you get it right

Answers

Answer:

give other guy brainliest

Answer:El mercantilismo en Gran Bretaña consistió en la posición económica de que, para aumentar la riqueza, sus colonias serían proveedoras de materias primas y exportadoras de productos terminados. El mercantilismo provocó muchos actos de lesa humanidad, incluida la esclavitud y un sistema de comercio desequilibrado.

Explanation:

What do weather scientists
do?
What are they called?

Answers

a meteorologist, they use math to understand and predict weather and climate.

Which of the following best describes the difference between metals and nonmetals?

a
metals tend to have low melting points and nonmetals have high melting points
b
nonmetals are more reactive than metals
c
metals are brittle and dull
d
metals have high melting points and are malleable, whereas, nonmetals have lower melting points and tend to be brittle.

Answers

Answer:

the answer is d.

Explanation:

because metals are refers to natural elements that are hard, shiney, opaque, and dense. nonmetals implies thise chemical substances that are soft, non-shiney, transparent and brittle.

List and Describe the two groups of clastic sedimentary rock.

Answers

Answer:

Clastic sedimentary rocks are formed from rock fragments or clasts; chemical sedimentary rocks precipitate from fluids, and biochemical sedimentary rocks form as precipitation from living organisms.

Sedimentary rock is classified into two groups based on how they form. They are clastic and chemical. Clastic sedimentary rock is formed as bits of weathered rock become cemented together. Because all kinds of rock are subject to weathering many different minerals can make up this group of rocks.

Hey I'm Chloe can you Help me, Thank you :)
What pigment, only present in plants, makes photosynthesis possible?

Answers

Answer:

la photosintesis viene de la clorofila de la planta

Question number 12 I need help

Answers

Answer: Its B.

Explanation:

i cant quite explain

If the knot (W) travels 2 meters in 1 second, we say it has a _____ of 2 m/s.

Answers

Answer:

we say it has a speed of 2m/s

15g of sugar and 10g of water are measured separately. The sugar is dissolved in the water. What will
the mass of the solution be?

Answers

Answer: a) No, both are different.

b) Ramesh- 9.9%

  Sarika - 10%

Explanation:

According to the solution prepared by Ramesh,

Mass of sugar he took (Solute) = 10 g

Mass of water he took (Solvent) = 100 g

Thus Mass % of the solution =

     

According to the solution prepared by Sarika,

Mass of sugar she took (Solute) = 10 g

Mass of Solution she took  = 100 g

Thus Mass % of the solution =

     

Explanation:

Characteristics of a substance that describe its' ability to change into a different substance are called?

Answers

A characteristic of a pure substance that describes its ability to change into different substances. chemical change. A change that occurs when one or more substances change into entirely new substances with different properties. physical property.

How many liters of nitrogen would be needed to react with 93.0 liters of hydrogen using the balance
equation below:
N2 + 3H2 → 2NH3

Answers

Answer:

7NH

Explanation:

Determine the number of molecules present in 1.53 mol of carbon monoxide

Answers

Answer:

hi

Explanation:

this is my first time on this app so what do i do

A solution of 1.8274g of a polypeptide in 274mL of a aqueous solution has an osmotic pressure at 31.40 degrees C of 2.012 mmHg. The approximate molecular weight of this polymer is _____ g/mol.

Answers

Answer: Hence, the approximate molecular weight of the poymer is 64106 g/mol

Explanation:

[tex]\pi=CRT[/tex]

where,

[tex]\pi[/tex] = osmotic pressure of the solution = 2.012 mm Hg =  0.0026 atm

i = Van't hoff factor = 1 (for non-electrolytes)

Mass of solute (polypeptide) = 1.8274 g  

Volume of solution = 274 mL

R = Gas constant = [tex]0.0821Latm/Kmol[/tex]

T = temperature of the solution = [tex]31.40^0C=(273+31.40)K=304.4K[/tex]

Putting values in above equation, we get:

[tex]0.0026=\frac{1.8274 g\times 1000}{M\times 274ml}\times 0.0821\times 304.4[/tex]

[tex]M=64106g/mol[/tex]

Hence, the approximate molecular weight of the poymer is 64106 g/mol

How can you model the movement of a primary wave?

Answers

Answer:

P-waves (primary or compressional waves) are longitudinal or compression waves, able to move through solids, liquids, and gases at speeds ranging between 300-5,000 metres per second. As they travel through rock, they move particles back and forth in the same direction that the wave is moving

Explanation:

if water is added to a 0.70 molar solution of CuSO4 what will change



A. molarity will increase



B. Molarity will decrease



C. the amount of CuSO4 will decrease



D. No change in molarity or amount of salute

Answers

Answer:

B. Molarity will decrease

Explanation:

Molarity is one of the measures of the molar concentration of a solution. It is calculated by dividing the number of moles of the solute by the volume of the solvent. This means that the higher the amount of solute in relation to the volume of solvent, the higher the molarity of that solution.

In essence, adding water to a solution dilutes it i.e it increases the solvent's volume in relation to the solute, causing the molarity to decrease. In a nutshell, diluting a solution (by adding water or more solvent) causes the molarity of such solution to decrease. For example, if water is added to a 0.70 molar solution of CuSO4, the molarity of the solution will DECREASE.

How would you describe the size of our sun compared to a red dwarf and a supergiant?
The sun is the same size as a red dwarf.
The sun is the same size as a supergiant.
The sun is smaller than the red dwarf and the supergiant.
O The sun is larger than a red dwarf but smaller than a supergiant.

Answers

Answer:

D is the answer

Explanation:

Other Questions
what does a brainleast do What are the steps to solving the equation: -3w+9= -12 which staple product used in italian cuisine came from latin america?a.olivesb.grainc.tomatoesd.cheese help- I think its geometry ? please help me!!!!! fill in the blanks Scott travels north 3 Km and then goes west 3 Km before coming straightback south 3 km. What is his displacement? *9 Km3 km, W3 Km, E9 km, S 3x+6=39What is the value of x? 11. HydroGrow is considering building a new greenhouse in which to grow tomatoes. The board meets and decides that this is the right thing to do. Before they can put their plans into action, the interest rate increases. The present value of the future revenue from this investment project a. is now lower than it was before, and so Hydro Grow is less likely to build the building. b. is now lower than it was before, and so HydroGrow is more likely to build the building. c. is now higher than it was before, and so HydroGrow is less likely to build the building. d. is now higher than it was before, and so HydroGrow is more likely to build the building. A family plans to have 3 children. For each birth assume that the probability of a boy is the same as a girl. What is the probability of having exactly one girl Solve for t: t + 7 = 21 A. t = 28 B. t = 14 C. t = -28 D. t = -14 The function, f(x) = sec(x), is plotted below.On a coordinate plane, parabolas repeat. A parabola opens up approaches StartFraction pi Over 2 EndFraction, has vertex (0, 1), and approaches StartFraction pi over 2 EndFraction. The parabola flips over the x-axis at every measure of pi.For which values of x is the limit positive infinity when x approaches the values from the left?Negative StartFraction 3 pi Over 2 EndFractionNegative StartFraction pi Over 2 EndFraction0StartFraction pi Over 2 EndFractionStartFraction 3 pi Over 2 EndFraction How do matter and energy interact in a food web or energy pyramid model? please help me this is so confusing Jamie recorded the number of points she scored during her last 5 basketball games. She scored, 15, 25, 10, 2, and 8 points. What is the mean absolute deviation of the points she scored during the last five games? Bluestone Company had three intangible assets at the end of the current year:a. A patent purchased this year from Miller Co. on January 1 for a cash cost of $3,200. When purchased, the patent had an estimated life of 16 years.b. A trademark was registered with the federal government for $7,500. Management estimated that the trademark could be worth as much as $190,000 because it has an indefinite life.c. Computer licensing rights were purchased this year on January 1 for $70,000. The rights are expected to have a five-year useful life to the company.Required:1. Compute the acquisition cost of each intangible asset.Acquisition CostPatent Trademark 02. Compute the amortization of each intangible for the current year ended December 31. (Do not round intermediate calculations.)Amortization ExpensesPatent Trademark 0 3. Show how these assets and any related expenses should be reported on the balance sheet and income statement for the current year.BLUESTONE COMPANYIncome Statement (partial)For the year ending December 31BLUESTONE COMPANYBalance sheet (partial)At December 31Intangibles: please give the answer and explain I beg yall i am giving all my points please help please I will make brainliest please A type of electric car can travel 3 miles on 1 kilowatt hour of electricity. How many kilowatt hours of electricity would it take to drive electric car to 's house and back? Lives miles from . Answer the following:How are fossils formed ? Which of the development in the period 1878-1922 best explains the change in Japanese trade patterns shown in the graph below . A. Japanese manufacturing output decreased because Japanese leaders restricted commercial ties.B. Export of manufactured goods declined because United States tariffs on Japanese goods increased.C. Japanese manufacturing output rose as a consequence of industrialization.D. Japanese imports of raw materials increased as a consequence of extensive immigration to japan. 1. What phase of mitosis produces 2 daughter cells? 2. What is the name of the process that finally separates the daughter cells?