why do you think we cannot use a common fuel like diesel or gasoline for space travel ?
Answer:
Explanation:
it take oxygen in the atmosphere to burn it... in space there isn't any air :0
An astronaut is a distance L from her spaceship, and is at rest with respect to the ship, when she discovers that her tether has broken. She tosses a wrench with a speed Vw in the opposite direction of the ship to propel herself back to the ship. The astronaut has mass MA, and the wrench has mass Mw.
Required:
a. Draw a sketch, showing the subsequent motion of the astronaut and the wrench.
b. What is the initial momentum (before toss) of the astronaut plus wrench system? What is the final momentum?
c. Use conservation of momentum to solve for the speed of the astronaut VA, relative to the ship, in terms of MA, Mw and Vw.
d. How long does it take her to reach the ship in terms of L, MA, Mw and Vw?
e. How far has the wrench traveled from its original position when the astronaut reaches the ship? Express your answer in terms of L, MA and Mw.
Answer:
B) I₀ = I_f= 0, C) vₐ = [tex]\frac{m_w}{m_a} \ v_w[/tex] , D) t = [tex]\frac{m_a}{m_w} \ \frac{L}{v_w}[/tex]
Explanation:
A) in the attachment you can see a diagram of the movement of the key and the astronaut that is in the opposite direction to each other.
B) Momentum equals the change in momentum in the system
I = ∫ F dt = Δp
since the astronaut has not thrown the key, the force is zero, so the initial impulse is zero
I₀ = 0
The final impulse of the two is still zero, since it is a vector quantity, subtracting the impulse of the two gives zero, since it is an isolated system
I_f = 0
C) We define the system formed by the astronaut and the key, for which the forces during the separation are internal and the moment is conserved
initial instant.
p₀ = 0
final instant
p_f = [tex]m_a v_a - m_w v_w[/tex]
We used the subscript “a” for the astronaut and the subscript “w” for the key
the moment is preserved
po = p_f
0 = mₐ vₐ - m_w v_w
vₐ = [tex]\frac{m_w}{m_a} \ v_w[/tex]
D) as the astronaut goes at constant speed we can use the uniform motion relationships
vₐ = x / t
t = x / vₐ
t = [tex]\frac{m_a}{m_w} \ \frac{L}{v_w}[/tex]
Man-made climate change is an example
of...
Electroconvulsive therapy would be done under the
supervision of a counseling psychologist, where high level
of electric shock would be admistered.
Select one:
True
False
Answer:
the answer of this question is true
Which of the following best defines climate? PLEASE HELP!!
The table provided shows the masses and volumes of four liquids. A student has a mystery liquid with a density of 3 g/mL. Which liquid does the student have?
Liquid 1
Liquid 2
Liquid 3
Liquid 4
Answer: Liquid 2, if it's 3 g/mL and liquid 2 has 6gs and 2 mLs than it's 3g/mL
HELPPP WILL MARK BRAINLIST What type of image is formed by a lens if m= 2.7?
A. The image is smaller than the object and is virtual.
B. The image is smaller than the object and is real.
C. The image is larger than the object and is real.
D. The image is larger than the object and is virtual.
Answer:
the answer is C
Explanation:
So, the formed image will be real and inverted.
A 10kg block is Pulled along a horizontal
Surface by a force
of 50N at an angles
of 37° with the horizontal If the
coefficient of sliding friction b/n the
block and the surface is o.2
(g=10m/s^2 Sin 37=O.6 and cos 37 = 0.8)
A, what frictional forces acting on the block?
B,what is the acceleration of the block?
Answer:
hope u can understand the method
Please select the word from the list that best fits the definition
location of most volcanoes
Island arc
Lava
Basalt
Magma
Hotspot
Plate boundaries
Answer:
The answer is E., or "Plate Boundaries".
The word best describes the definition of the location of volcanoes is "plate boundaries". Therefore, option (E) is correct.
What are plate boundaries?The lithosphere is broken into tectonic plates that undergo some large motions and the boundary regions between plates are called plate boundaries. Based on their motions there are three kinds of plate boundaries: divergent, convergent, and transform.
Divergent boundaries are moving away from one another and separate, they form a rift. As the gap widens, the underlying layer may be soft for molten lava underneath to push upward and resulting in the formation of volcanic islands.
Convergent boundaries move towards one another and collide, subduction usually takes place. The denser plate goes underneath the less dense one and the plate boundaries also experience buckling.
Transform boundaries slide alongside one another and are exposed to huge amounts of stress and strain and are momentarily held in place. The two plates succeed in moving with respect to one another and cause earthquakes.
Learn more about plate boundaries, here:
https://brainly.com/question/18256552
#SPJ5
What does the if statement in a macro do?
It changes the data type of the macro based on the results of a query.
It attaches the macro to a query or report prior to printing to make it readable.
It creates a control in a form and connects the macro to the control’s event property.
It defines a criterion that evaluates to true or false and specifies actions to take if it is true.
Answer:
It defines a criterion that evaluates to true or false and specifies actions to take if it is true.
Explanation:
EDGE2020
Answer:
D
Explanation:
Two band members are marching toward each other beginning from opposite end zone goal lines (100 yards apart). One band member is playing a picolo and marching at 5 ft/s and the other is playing a sousaphone and marching at 1 ft/s. At what yard line do they meet?
Answer:
17
Explanation:
answer is 16.6666 which is equal to 17
With a thunderstorm brewing, an electric field of magnitude 2.0 × 102 newtons/coulomb exists at a certain point in the earth’s atmosphere. If an electron at that point has a charge of -1.6 × 10-19 coulombs, what is the magnitude of the force on the electron as a result of the electric field?
A.
2.0 × 10-6 newtons
B.
3.2 × 10-17 newtons
C.
5.8 × 105 newtons
D.
6.4 × 10-3 newtons
E.
1.7 × 104 newtons
Answer:
The correct option is (b).
Explanation:
Given that,
Electric field, [tex]E=2\times 10^2\ N/C[/tex]
We need to find the magnitude of the force on the electron as a result of the electric field.
We know that, the electric force is given by :
[tex]F=qE\\\\=1.6\times 10^{-19}\times 2\times 10^2\\\\F=3.2\times 10^{-17}\ N[/tex]
So, the required force on the electron is equal to [tex]3.2\times 10^{-17}\ N[/tex].
You are playing in a volley ball game Your team has 12 and the other team has 18.
How many points does your team needs to win?
How many points does the other team needs to win?
Answer:
you need 7 points and the other team just needs to stop you from scoring
Explanation:
Shadow is formed when an_____
object comes in the
way
of light.
Answer:
shadow is formed when an opaque object comes on path of light shadows are formed because light travels in a straight line and it can't pass through an opaque object
Answer:
Opaque object
Explanation:
Shadow forms when an opaque object comes in the way of light. Because opaque objects does not allow light to pass through them and light travels in a straight line. Hence a retreating figure of the same opaque object ,forms and it's black in colour without any detail just outline.
An 800 kg charging bull rams through a wooden fence. It was travelling at
5 m/s, now it's travelling at 3 m/s. How much impulse did the bull
experience by smashing the fence?
Answer:
J = 1600 kg-m/s
Explanation:
Given that,
The mass of charging bull rams, m = 800 kg
Initial speed, u = 5 m/s
Final speed, v = 3 m/s
We need to find the impulse the bull experience by smashing the fence. Let it is J. We know that, impulse is equal to the change in momentum such that,
J = m(v-u)
Put all the values,
J = 800(3-5)
= 800(-2)
= -1600 kg-m/s
Hence, the magnitude of impulse is equal to 1600 kg-m/s.
A p-n junction diode is, as the name suggests, an electronic device that is made up of a p-type semiconductor and an n-type semiconductor joined together.
a. True
b. False
Answer:
a. True
Explanation:
When a p-type semiconductor is placed adjacent to an n-type semiconductor the common plane thus formed is termed as P-N Junction or P-N Junction Diode.
The diode is formed by melting both p-type and n-type semiconductors through a special manufacturing process called "Thermo-Compression Proces".
The P-N junction has a property of one-way conduction. It means it only allows the current to pass through it in one direction and the current flow is practically zero in the other direction. Thus, it can act as a diode. The p-side acts as the anode, while the n-side acts as the cathode.
Hence, the correct option is:
a. True
Which of the following is a category of mechanical wave?
O A. Transverse
B. Frictional
C. Parallel
D. Perpendicular
Answer:
a
because the mechanical wave is when it goes over and over again
Answer:
The answer is a like i said 3hrs ago i dont know if this guy copied me tbh
Explanation:
What's the difference between heat and temperature?
Answer:
Heat is the transfer of thermal energy between molecules within a system and is measured in Joules (J). It measures how energy moves or flows. Temperature is the average kinetic energy of molecules within a material or system and is measured in Celcius (°C), Kelvin (K), Fahrenheit (°F), or Rankine (R).
The density of table sugar is 1.59g/cm3 what is the volume of 7.85g of sugar?
Answer: 4.94cm³
Explanation:
Data;
ρ = 1.59g/cm³
mass = 7.85g
volume = ?
density = mass / volume
ρ = m / v
v = m / ρ
v = 7.85 / 1.59
v = 4.94cm³
Calculate the potential difference across the 8 ohm resistor
Explanation:
if the current is 1A
V=iR
V= 1 × 8
V = 8volts
A soccer ball is released from rest at the top of a grassy incline. After 6.2 seconds, the ball travels 47 meters. One second later, the ball reaches the bottom of the incline.
(a) What was the balls acceleration?(assume that the acceleration was constant).
(b) How long was the incline?
Answer:
(a) a = 2.44 m/s²
(b) s = 63.24 m
Explanation:
(a)
We will use the second equation of motion here:
[tex]s = v_it+\frac{1}{2}at^2[/tex]
where,
s = distance covered = 47 m
vi = initial speed = 0 m/s
t = time taken = 6.2 s
a = acceleration = ?
Therefore,
[tex]47\ m = (0\ m/s)(6.2\ s)+\frac{1}{2}a(6.2\ s)^2\\\\a = \frac{2(47\ m)}{(6.2\ s)^2}[/tex]
a = 2.44 m/s²
(b)
Now, we will again use the second equation of motion for the complete length of the inclined plane:
[tex]s = v_it+\frac{1}{2}at^2[/tex]
where,
s = distance covered = ?
vi = initial speed = 0 m/s
t = time taken = 7.2 s
a = acceleration = 2.44 m/s²
Therefore,
[tex]s = (0\ m/s)(6.2\ s)+\frac{1}{2}(2.44\ m/s^2)(7.2\ s)^2\\\\[/tex]
s = 63.24 m
Light of intensity I0 passes through 4 ideal polarizing sheets. Unpolarized light enters the 1st sheet that has a horizontal transmission axis. Light continues to the 2nd sheet that has its transmission axis at 25 degrees with respect to the 1st sheet, then to the 3rd sheet that has its transmission axis at 47 degrees with respect to the 1st sheet then to the 4th sheet that has its transmission axis at 10 degrees with respect to the 3d sheet. The intensity of the emerging light as percentage of I0 is close to:
Answer:
34.24 %
Explanation:
Since I₀ is the intensity of the un-polarized light, the intensity I₁ of the light polarized by the 1st sheet is (by the one-half rule) I₁ = I₀/2.
The intensity of polarized light I from a polarized source I' is I = I'cos²Ф where Ф is the angle between the direction of I' and I. Since the second sheet has its transmission axis at 25° with respect °o the 1st sheet, the intensity of light I₂ from the second sheet is I₂ = I₁cos²25°.
Also, the 3rd sheet has its transmission axis 47° with respect to the 1st sheet. So, the angle between the transmission axis of the 2nd sheet and 3rd sheet is 47° - 25° = 22°. So, the intensity I₃ from the 3rd sheet is I₃ = I₂cos²22°
Finally, the 4th sheet has its transmission axis 10° with respect to the 3rd sheet. So, the intensity I₄ from the 4th sheet is I₄ = I₃cos²10°.
So, I₄ = I₃cos²10°
I₄ = I₂cos²22°cos²10°
I₄ = I₁cos²25°cos²22°cos²10°
I₄ = (I₀/2)cos²25°cos²22°cos²10°
I₄/I₀ = cos²25°cos²22°cos²10°/2
I₄/I₀ = (cos25°cos22°cos10°)²/2
I₄/I₀ = (0.9063 × 0.9272 × 0.9848)²/2
I₄/I₀ = 0.8275²/2
I₄/I₀ = 0.6848/2
I₄/I₀ = 0.3424
So, as a percentage,
I₄/I₀ × 100% = 0.3424 × 100% = 34.24 %
The period of a sound wave coming from an instrument is 2 seconds. What 1 point
is the frequency of the sound? (f = 1/T) *
5 Hz
50 Hz
ОО
0.5 Hz
Answer:
b
Explanation:
On a distance-time graph, what is shown when the curve is flat going from left to the right?
A. a negative speed
B. no speed
C. a positive speed
D. It does not mean anything.
Please help me !!im on a test
If at a particular instant and at a certain point in space the electric field is in the x-direction and has a magnitude of 5.00 V/mV/m, what is the magnitude of the magnetic field of the wave at this same point in space and instant in time
Answer:
the magnitude of the magnetic field of the wave is 16.7 nT
Explanation:
Given the data in the question;
Electric field E = 5.00 V/m
we know that the expression for the electric field of an electromagnetic wave in terms if magnetic field is;
E = cB
where c is the speed of light ( 3 × 10⁸ m/s )
and B is the magnetic field
so we solve for the magnetic field
B = E / c
we substitute in the value of E and c
B = (5.00 V/m) / (3 × 10⁸ m/s)
B = 1.67 × 10⁻⁸ T
B = 1.67 × 10⁻⁸ T [tex]( \frac{1nT}{10^{-9}T} )[/tex]
B = 16.7 nT
Therefore, the magnitude of the magnetic field of the wave is 16.7 nT
If you dropped a ball off the roof, and could neglect air resistance, the impact velocity of the ball on the sidewalk would be 102 miles per hour [mph]. Calculate the height of the building in units of feet.
Answer:
h = 105.98 m
Explanation:
We will use the third equation of motion here:
[tex]2gh= v_f^2-v_i^2[/tex]
where,
g = acceleration due to gravity = 9.81 m/s²
h = height = ?
vf = final speed = (102 mi/h)(1 h/3600 s)(1609.34 m/1 mi) = 45.6 m/s
vi = initial speed = 0 m/s
Therefore,
[tex]2(9.81\ m/s^2)h = (45.6\ m/s)^2-(0\ m/s)^2\\\\h = \frac{ (45.6\ m/s)^2}{2(9.81\ m/s^2)}[/tex]
h = 105.98 m
Red light of wavelength 633 nm from a helium-neon laser passes through a slit 0.370 mm wide. The diffraction pattern is observed on a screen 3.70 m away. Define the width of a bright fringe as the distance between the minima on either side. You may want to review (Page) . For related problem-solving tips and strategies, you may want to view a Video Tutor Solution of Single-slit diffraction. Part A What is the width of the central bright fringe
Answer:
Δx = 6.33 x 10⁻³ m = 6.33 mm
Explanation:
We can use the Young's Double Slit Experiment Formula here:
[tex]\Delta x = \frac{\lambda L}{d}\\\\[/tex]
where,
Δx = distance between consecutive dark fringes = width of central bright fringe = ?
λ = wavelength of light = 633 nm = 6.33 x 10⁻⁷ m
L = distance between screen and slit = 3.7 m
d = slit width = 0.37 mm = 3.7 x 10⁻⁴ m
Therefore,
[tex]\Delta x = \frac{(6.33\ x\ 10^{-7}\ m)(3.7\ m)}{3.7\ x \ 10^{-4}\ m}[/tex]
Δx = 6.33 x 10⁻³ m = 6.33 mm
A certain object is subject to two forces: a 10-N force straight up and a 10-N force straight down. A student states that since both forces are in the vertical direction, the object cannot be moving horizontally. Why is this an incorrect conclusion?
A.
The vertical forces are balanced.
B.
Vertical net forces can cause horizontal motion.
C.
A horizontal force is not required for horizontal movement.
D.
Two vertical forces can combine to form a horizontal resultant force.
Answer:
C. Consider projectile motion. If an object starts out at some angle and only vertical forces (gravity) are present, the horizontal speed remains constant thruout the motion.
what unit is used to measure resistance
Answer:
Ohms
Explanation:
The unit of resistance is ohms.
The formula length x width x height is used to calculate the volume of a type of
A
gas.
B
solid.
C
liquid.
D
plasma.
Answer:
D
Explanation:
egwfefeewfwvebefhbdhahwuw