I NEED HELP, LIKE NOW!\
What is -27 radical 72

The slope-intercept equation of line is -1 and equation will be y = -x - 1.

What is the slope?

m = (y2 - y1) / (x2 - x1) is the formula for calculating slope from two points on a line, (x1, y1) and (x2, y2). Here,

m = the line's slope

x1 is equal to the initial point's x-coordinate.

y1 is the first point's y-coordinate.

x2 is equal to the second point's x-coordinate.

The second point's x-coordinate is equal to y2.

x1 = -3, y1 = 4; x2= -2, y2=3

m = (3-4)/(-2 - (-3))

= -1 / (-2+3)

= -1/1

m = -1

Substitute the value in given equation:

y = -x + (-1)

y = -x - 1

Hence, the slope-intercept equation of line is -1 and equation will be y = -x - 1.

To know more about slope check the below link:

https://brainly.com/question/16949303

#SPJ9

The value of arc PQ is 110°

The circumference of a circle is the length of the 360 degree arc of that circle. Therefore the sum of the arc on a circumference of a circle is 360°

Therefore ,

8x-10+ 6x + 10x+10 = 360

24x -10+10 = 360

24x = 360

divide both sides by 24

x = 360/24

x = 15

therefore the value of x is 15

Arc PQ = 8x -10

substitute 15 for x

ArcPQ = 8×15-10

= 120-10

= 110°

therefore the value of arc PQ is 110°

learn more about circumference from

https://brainly.com/question/29644055

#SPJ1

The hexadecimal system numbering system is base 16; in other words, 16 numerals are used to express any given number.

In this system, 16 numerals are used to represent any given number. The numerals used in this system are 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, and F, where A represents 10, B represents 11, and so on, up to F, which represents 15.

This system is commonly used in computer science, as it is more compact than the decimal system, and allows for easier conversion between binary and decimal systems. In the hexadecimal system, each digit represents a power of 16, just as each digit in the decimal system represents a power of 10.

To know more about hexadecimal system here

https://brainly.com/question/15452295

#SPJ4

The solution is all values of x greater than -9.

The correct graph for the given inequality "Negative 3x - 7 < 20" is:

From negative 10 to positive 10, a number line runs. An open circle shows up at negative 9. From negative 9 to positive 10, the number line is shaded.

To chart the arrangement, we initially confine the variable by adding 7 to the two sides of the imbalance:

Negative 3x - 7 + 7 < 20 + 7

Negative 3x < 27

Next, we divide both sides by -3, remembering to flip the inequality sign since we're dividing by a negative number:

Negative 3x/-3 > 27/-3

x > -9

Therefore, the arrangement is all upsides of x more prominent than - 9. Since these are the values that satisfy the inequality, we graph this by drawing an open circle at -9 on the number line and shading all values to the right of -9.

know more about inequality visit:

https://brainly.com/question/30231190

#SPJ1

The number of atoms present in 8.500 mole of chlorine atoms can be calculated using Avogadro's number, which is 6.022 x [tex]10^{23}[/tex] atoms per mole. Therefore:

Number of atoms = 8.500 mole x 6.022 x [tex]10^{23}[/tex]atoms/mole

Number of atoms = 5.1177 x [tex]10^{24}[/tex] atoms

The mass of 15.50 mole of oxygen can be calculated using the molar mass of oxygen, which is 16.00 g/mol. Therefore:

Mass = 15.50 mole x 16.00 g/mole

Mass = 248 g

The number of moles of helium in 1.953 x [tex]10^{8}[/tex] g of helium can be calculated using the molar mass of helium, which is 4.00 g/mol. Therefore:

Number of moles = 1.953 x [tex]10^{8}[/tex] g / 4.00 g/mol

Number of moles = 4.883 x [tex]10^{7}[/tex] mol

The number of atoms in 147.82 g of sulfur can be calculated using the molar mass of sulfur, which is 32.06 g/mol, and Avogadro's number. Therefore:

Number of moles = 147.82 g / 32.06 g/mol

Number of moles = 4.608 mol

Number of atoms = 4.608 mol x 6.022 x [tex]10^{23}[/tex] atoms/mol

Number of atoms = 2.773 x [tex]10^{24}[/tex] atoms

The molar mass of Co (cobalt) is 58.93 g/mol.

The formula mass of Ca3(PO4)2 can be calculated by adding the atomic masses of each element in the compound. The atomic masses are:

Ca = 40.08 g/mol

P = 30.97 g/mol

O = 16.00 g/mol

Formula mass = (3 x Ca) + (2 x P) + (8 x O)

Formula mass = (3 x 40.08 g/mol) + (2 x 30.97 g/mol) + (8 x 16.00 g/mol)

Formula mass = 310.18 g/mol

to know more about atoms

brainly.com/question/30898688

#SPJ1

Answer:

3. 2(x - 3) = x + 4

2x - 6 = x + 4

x = 10

4. 3x = 2(x - 1)

3x = 2x - 2

x = -2

The unit for the coefficient k would be dollars per unit of length squared.

To find the units for the coefficient k in the formula C = klw, we need to analyze the units of each variable.

C represents the cost of the home, which is measured in dollars.

l represents the length of the home, which is measured in some units of length, such as feet or meters.

w represents the width of the home, which is also measured in some units of length, such as feet or meters.

Therefore, we can determine the units for k by analyzing how the units for C, l, and w combine in the formula C = klw.

Starting with the left-hand side of the equation, we know that C represents dollars.

On the right-hand side of the equation, we have k times l times w. To determine the units of k, we need to figure out what units would make the entire right-hand side of the equation equal to dollars.

Since we are multiplying three quantities (k, l, and w), the units of k must cancel out the units of length in l and w in order to leave us with units of dollars.

This means that the units of k must be dollars per unit of length squared. We can write this as:

k = $/length^2

So, the units for the coefficient k in the formula C = klw are dollars per unit of length squared.

More on units of variables can be found here: https://brainly.com/question/27853679

#SPJ1

Answer:

1.a

2.c

3.d

4.b

Step-by-step explanation:

Step-by-step explanation:

+ 1.25

every new term is the previous term + 1.25.

with starting value -1.75

f(n) = 1.25n - 1.75

The exponential function of the form y=ab^x that has the given points is y = (25/7)(7/5)^x

We can use the given points to set up a system of equations and solve for the values of a and b in the exponential function y = ab^x.

Using the point (1,5), we get:

5 = ab^1

Using the point (2,7), we get:

7 = ab^2

Now, we can solve for a and b by dividing the second equation by the first:

7/5 = (ab^2)/(ab^1

Simplifying this expression, we get:

7/5 = b

Substituting this value of b back into one of the original equations, we can solve for a:

5 = a(b^1) = a(b) = a(7/5)

Simplifying this expression, we get:

a = 25/7

So, the exponential function that passes through the points (1,5) and (2,7) is:

y = (25/7)(7/5)^x

Read more about exponential function at

https://brainly.com/question/2456547

#SPJ1

The missing length is 7.5 cm.

What is a rectangular prism?

A three-dimensional solid form with six faces, including rectangular bases, is called a rectangular prism. A rectangular prism also refers to a cuboid. A cuboid and a rectangular prism have the same cross-section.

Here, we have

Let the missing length be x cm.

The formula for the surface area of a rectangular prism is:

SA = 2lw + 2lh + 2wh

We are given that the height and width are both 9 cm, so we can substitute those values and simplify:

432 = 2(x)(9) + 2(x)(9) + 2(9)(9)

432 = 18x + 18x + 162

432 - 162 = 36x

270 = 36x

x = 270/36

x = 7.5

Hence, the missing length is 7.5 cm.

To learn more about the rectangular prism from the given link

https://brainly.com/question/31509002

#SPJ1

Answer:

yes

Step-by-step explanation:

Below is the correct matching of the questions to the right answers

The statistical measures listed in the previous question are often used to describe and analyze statistical variables.

For instance, the range of a data set is a measure of the spread of values in a variable, while the quartiles and interquartile range provide information about the distribution of the variable. Mean average deviation is a measure of the variability of the variable around its mean value.

Learn more about statistical measures here:

https://brainly.com/question/15525560

#SPJ1

1. Mean average deviation - The average deviation of the data from the mean.

2. Range of a data set - The difference between the highest value and the lowest value in a numerical data set.

3. First quartile - The median in the upper half of the rank-ordered data.

4. Second quartile - The median value in the data set.

5. Third quartile - The median in the lower half of the rank-ordered data.

6. Interquartile range - he distance between the first and third quartiles of the data set.

The statistical measures are often used to describe and analyze statistical variables. For instance, the range of a data set is a measure of the spread of values in a variable, while the quartiles and interquartile range provide information about the distribution of the variable. Mean average deviation is a measure of the variability of the variable around its mean value.

Read more about Range

brainly.com/question/24326172

#SPJ1

Rounding the result off to the nearest 10th, the lateral surface area of the cylinder is 822 inches².

Surface area is the total area of the exposed surfaces of a three-dimensional object. It is measured in square units such as square centimeters (cm2) or square meters (m2). Surface area is an important concept in mathematics, science, and engineering, as it is the total area that determines properties such as friction, heat transfer, and fluid dynamics. For example, a larger surface area can increase the rate of heat transfer and allow for more efficient cooling. Similarly, a larger surface area can increase the friction between two objects, allowing them to grip better. Surface area is also important in chemistry, as it affects the amount of gas or liquid that can be absorbed or released by a given object.

The cylinder has a radius of 11 inches and a height of 12.5 inches. To find the lateral surface area of a cylinder, the formula used is A = 2πrℎ, where r is the radius and h is the height of the cylinder. After plugging in the values, the lateral surface area of the cylinder is 821.75 inches². Rounding the result off to the nearest 10th, the lateral surface area of the cylinder is 822 inches².

To know more about surface area click-
brainly.com/question/16519513
#SPJ1

This means that the corresponding sides of the two triangles are in proportion, and therefore CD is parallel to AB, as required.

A triangle is a polygon with three sides and three angles. It is one of the basic shapes in geometry and is often used in mathematics, science, engineering, and art. Triangles can be classified into different types based on the length of their sides and the size of their angles. Triangles are used in various applications, such as in the construction of buildings, bridges, and other structures, as well as in navigation and surveying. They are also important in various fields of mathematics, including trigonometry and geometry.

Here,

To use similarity theorems to show that CD is parallel to AB, we need to first establish that triangles AEB and CED are similar. If we can show that these triangles are similar, then we can use the corresponding angles theorem, which states that if two pairs of corresponding angles are congruent, then the lines containing the sides are parallel.

Let's compare the two triangles AEB and CED:

Angle AEB is congruent to angle CED (both are vertical angles).

Angle EAB is congruent to angle ECD (both are alternate interior angles formed by a transversal cutting parallel lines AB and CD).

Angle BAE is congruent to angle DCE (both are alternate interior angles formed by a transversal cutting parallel lines AB and CD).

Therefore, we have established that triangles AEB and CED are similar by the angle-angle-angle similarity theorem.

Now that we have shown that the triangles are similar, we can use the corresponding sides theorem, which states that the corresponding sides of similar triangles are in proportion, to find out if CD is parallel to AB.

The corresponding sides of AEB and CED are:

AE/CE = AB/CD

Substituting the given values, we have:

AC + CE / CE = AB / BD

4 + 12 / 12 = AB / (14/3)

16/12 = AB / (14/3)

AB = (16/12) x (14/3)

= 56/9

Now we can use the corresponding sides theorem to find the length of CD:

AE/CE = AB/CD

Substituting the values we have found, we get:

4/12 = (56/9)/CD

CD = (56/9) x (12/4)

= 14

Since we have found that AB = 56/9 and CD = 14, we can see that:

AB/CD = (56/9)/14

= 4/3

This means that the corresponding sides of the two triangles are in proportion, and therefore CD is parallel to AB, as required.

To know more about triangle,

https://brainly.com/question/28600396

#SPJ1

The total surface area of the triangular prism is calculated to be equal to 608 square centimeters.

The triangular prism can be observed to be a large rectangle and two identical triangles, so we shall calculate for the total surface area as follows:

area of one triangle = 1/2 × 8 cm × 12 cm

area of one triangle = 48 cm²

area of the two triangle faces = 2(48) = 96 cm²

area of the large rectangle face = (10 + 12 + 12) cm × 16 cm = 512 cm²

Total surface area of prism = 96 cm² + 512 cm² = 608 cm²

Therefore, the total surface area of the triangular prism is calculated to be equal to 608 square centimeters.

Read more about surface area here:https://brainly.com/question/12506372

#SPJ1

The volume of the solid as shown in the diagram is 540 cm².

Volume is the space occupied by a solid shape.

To calculate the volume of the of the solid, we use the formula below

Formula:

Where:

From the diagram in question,

Given:

Substitute these values into equation 1

Hence, the volume is 540 cm³.

Learn more about volume here: https://brainly.com/question/1331127

#SPJ1

Therefore , the solution of the given problem of equation comes out to be 10x - y = 51 is the point-slope form of the equation of the line passing through the points (6, -9) and (7, 1).

Variable words are frequently used in complex algorithms to show consistency between two arguments that are opposed to one another. Academic expressions called equations are used to show the equality of various academic figures. Take into account the details in the z + 7 proposals.

Here,

The equation for the line passing between the points (6, -9) and (7, 1) must be found in the point-slope form.

Using the equation m = (y2 - y1) / (x2 - x1), find the slope (m) of the line, where (x1, y1) and (x2, y2) are the coordinates of the two points.

=> (x1, y1) = (6, -9)

=> (x2, y2) = (7, 1)

=> m = (1 - (-9)) / (7 - 6)

=> m = 10 / 1 m = 10

Consequently, the line's slope is 10.

=> y - y1 = m(x - x1)

=> m = 10 (x1, y1) = (6, -9)

=> y - (-9) = 10(x - 6)

=> y + 9 = 10x - 60

=> 10x - y = 51

Therefore, 10x - y = 51 is the point-slope form of the equation of the line passing through the points (6, -9) and (7, 1).

To know more about equation visit:

https://brainly.com/question/649785

#SPJ1

Answer:

x=25.1

Step-by-step explanation:

by using Pythagorean theorem, [tex]a^{2} +b^{2}=c^{2}[/tex] where c is the hypotenuse

[tex]18.15^{2}[/tex]= 329.4225

[tex]17.39^{2}[/tex]= 302.4121

since those two side lengths are the legs, the sum of the numbers is the length of the hypotenuse squared

therefore, 631.8356 (the sum) = [tex]c^{2}[/tex]

by taking the square root of 631.8356, you will get approx 25.1 for the hypotenuse (aka x)

Answer:

Step-by-step explanation:

Making x the subject in the second equation gives:

x = 4+3y

substituting x = 4 +3y into the first one gives:

3(4 + 3y) + 2y = -21

12 + 9y +2y = -21

11y = -33

y = -3

The slope of the line in the reduced form is 4 / 7.

The slope of a line is the change in the dependent variable with respect to the change in the independent variable.

Therefore,

slope = m = change in y / change in x

slope = m = y₂ - y₁ / x₂ - x₁

P = (2, 3)

Q = (9, 7)

x₁ = 2

x₂ = 9

y₁ = 3

y₂ = 7

Therefore,

slope = 7 - 3 / 9 - 2

slope = 4 / 7

learn more on slope here: https://brainly.com/question/26578510

#SPJ1

The inequality expression representing the area of the shaded region, indicating both the shaded area and the broken line is; y > 0

An inequality is a mathematical statement consisting two expressions joined with inequality symbols, which includes; '<', '>', '≠', '≤', and '≥'.

The area of the shaded region is the part of the coordinate plane above the x-axis.

The region shaded can therefore be indicated by the area y > 0

The x-axis on the coordinate plane representing the boundary of the shaded region consists of broken line, which indicates that the line is not included in the shaded region.

The inequality representing the area of the shaded region is therefore;

y > 0

Learn more on writing inequalities here: https://brainly.com/question/21575354

#SPJ1

The decimal which is less than 0. 8 and greater than 0. 02 is 0. 46 (option B).

To answer this question, we need to understand how decimals work. A decimal is a number that represents a value less than one, and it is denoted by a dot or a period. The digits that come after the dot represent the number of tenths, hundredths, thousandths, etc., depending on the place value of the digit.

Now, let's consider the given options: 0.81, 0.46, 0.86, and 0.6. We need to find the decimal that lies between 0.8 and 0.02.

We can eliminate option D, 0.6, as it is less than 0.8. Similarly, we can eliminate option A, 0.81, as it is greater than 0.8.

To choose between options B, 0.46, and C, 0.86, we need to compare them with the given values, 0.8 and 0.02. We can see that 0.46 is less than 0.8 but greater than 0.02.

Therefore, the answer is option B, 0.46.

To know more about decimal here

https://brainly.com/question/9543292

#SPJ4

The position of point S after dilating will be half of the original. The dilated point S' has been shown below.

What is dilation?

Using a modification known as dilation, an object can be resized. Through dilatation, the objects can be resized or enlarged. This transformation results in a shape that is a perfect replica of the original image. The form's dimensions do vary, though. An expansion or contraction of the original form is required for a dilatation. This shift is referred to as a scale factor.

We are given a graph showing position of point S.

Now, on dilating the point by a scale factor of [tex]\frac{1}{2}[/tex], we get that the point will be located at half of the original.

The point has been located and attached in the image below.

Hence, the required solution has been obtained.

Learn more about dilation from the given link

https://brainly.com/question/30240987

#SPJ1

According to unitary method, Beau needs 60 wheels in all to build 9 puppy bots and 6 kitty bots.

The unitary method is a mathematical technique used to solve problems by finding the value of one unit and then calculating the value of the required quantity by multiplying or dividing it with the given value of units.

Given that each bot needs 4 wheels, we can find the number of wheels required to build one bot. Using the unitary method, we can say that one bot needs 4 wheels. Therefore, 9 puppy bots will need 9 times 4 wheels, which is 36 wheels.

Similarly, 6 kitty bots will need 6 times 4 wheels, which is 24 wheels. To find the total number of wheels required to build all the bots, we can add the number of wheels required for puppy bots and kitty bots

Total number of wheels required = 36 + 24 = 60

To know more about unitary method here

https://brainly.com/question/28276953

#SPJ4

The profit function of the company is given by P(x)=-4x^3 + 32x^2 - 64, where x is the number of toys sold in hundreds, and P(x) is the profit in thousands of dollars.

The key features of the graph of the profit function are the following:

The degree of the polynomial function is 3, which means that the graph is a cubic curve.

The coefficient of the leading term is negative (-4), which means that the graph opens downwards.

The coefficient of the quadratic term is positive (32), which means that the graph is concave up.

The y-intercept of the graph is -64, which means that the company will incur a loss of $64,000 if it does not sell any toys.

It should be noted that to find the maximum profit, we need to evaluate the profit function at x = 5.33:

P(5.33) = -4(5.33)^3 + 32(5.33)^2 - 64 = 23.78

Therefore, the maximum profit that the company can make is $23,780.

In summary, the graph of the profit function reveals that the company will incur a loss if it does not sell any toys, but it can make a profit if it sells at least some toys. The profit function has a cubic shape that opens downwards, indicating that the profit decreases as the number of toys sold increases beyond a certain point. The maximum profit occurs at x = 5.33, where the profit is $23,780.

Learn more about graph on;

https://brainly.com/question/19040584

#SPJ1

The length of chord XY is 5√2.

What is the length of the chord?

It is described as the line segment that connects any two points on the circle's circumference without going through the circle's center. As a result, the diameter is the chord of a particular circle that is the longest and goes through its center. In mathematics, determining the chord's length can be crucial at times.

Here, we have

Given: A circle with center O and radius 5 has a central angle XOY. X and Y are points on the circle. ​If the measure of arc XY is 90 degrees.

We have to find the length of chord XY.

∠XOY = 90°

OX = OY = 5

We draw a perpendicular from the center to chord XY bisect XY at D.

Now, since OD bisects ∠XOY

∠XOD = ∠YOD = 90°/2 = 45°

Now, in ΔXOD

sin45° = XD/OX

1/√2 = XD/5

5/√2  = XD...(1)

In ΔYOD

sin45° = YD/OY

5/√2  = YD...(2)

Adding (1) and (2), we get

XD + YD = 5/√2 + 5/√2

XY = 5√2

Hence, the length of chord XY is 5√2.

To learn more about the length of the chord from the given link

https://brainly.com/question/26094865

#SPJ1

the points we plotted are (-6, -1/2), (-4, 1/2), (0, -1/5), (3, 1/2), and (6, 1/5).

What is function?

a function is a relationship or expression involving one or more variables.  It has a set of input and outputs.

To find the x-intercepts, we set the numerator of the function equal to zero:

[tex]2 / (x^2 + 3x - 10) = 0[/tex]

This is only true if the numerator is equal to zero, so:

2 = 0

This is not possible, so the function has no x-intercepts.

To find the vertical asymptotes, we look for values of x that make the denominator equal to zero:

[tex]x^2 + 3x - 10 = 0[/tex]

We can factor the quadratic as:

(x + 5)(x - 2) = 0

This means that the function has vertical asymptotes at x = -5 and x = 2.

Now, let's plot some points between and beyond each x-intercept and vertical asymptote:

When x = -6, f(x) = 2 / (-6)² + 3(-6) - 10 = -1/2

When x = -4, f(x) = 2 / (-4)² + 3(-4) - 10 = 1/2

When x = 0, f(x) = 2 / (0)² + 3(0) - 10 = -1/5

When x = 3, f(x) = 2 / (3)² + 3(3) - 10 = 1/2

When x = 4, f(x) = 2 / (4)² + 3(4) - 10 = -1/2

When x = 6, f(x) = 2 / (6)² + 3(6) - 10 = 1/5

Therefore, the points we plotted are (-6, -1/2), (-4, 1/2), (0, -1/5), (3, 1/2), and (6, 1/5).

To know more about function visit,

https://brainly.com/question/11624077

#SPJ1

The mapping that is a function will be B). X

Every function got a set of input values called " Domain " and a set of respective output values as " Range"

And function worked as Function( Input value ) = Output value

There are basic rules for function :

1. There always exist output value for every single input value.

2. Every input value should have one and only one output value

For W : Rule 2 is violated

Here, Input value 6 result to two output value 2 and 4

Learn more about functions on

https://brainly.com/question/14065888

#SPJ1